ISO 2982-1:2013 specifies:
- boundary dimensions of adapter sleeves with taper 1:12 and withdrawal sleeves with tapers 1:12 and 1:30 for rolling bearings of a number of dimension series as specified in ISO 15;
- the outside diameter of suitable locknuts;
- distance from bearing small bore face to outer face of locknut;
- distance from bearing small bore face to outer face of bolt head;
- overall length of withdrawal sleeve and bearing ring.
Document published on: 2013-04-15 Edition: 2 (Monolingual) ICS: 21.100.20 Status: Published Stage: 60.60 (2013-04-10) TC/SC: ISO/TC 4 Number of Pages: 8
Revises: ISO 2982-1:1995