Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 1: General principles for selection of cracking-resistant materials
This standard has been revised by: ISO 15156-1:2015
ISO 15156-1:2009 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments, where the failure of such equipment can pose a risk to the health and safety of the public and personnel or to the environment. ISO 15156-1:2009 can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements given in the appropriate design codes, standards or regulations.
ISO 15156-1:2009 addresses all mechanisms of cracking that can be caused by H2S, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking and galvanically induced hydrogen stress cracking.
A non-exhaustive list is provided of equipment to which ISO 15156-1:2009 is applicable, together with permitted exclusions.
ISO 15156-1:2009 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria.
ISO 15156-1:2009 is not necessarily applicable to equipment used in refining or downstream processes and equipment.
Document published on: 2009-10-15 Edition: 2 (Monolingual) ICS: 75.180.01 Status: Withdrawn Stage: 95.99 (2015-08-20) TC/SC: ISO/TC 67 Number of Pages:
Note: This standard is updated by a Registration Authority
Revised by: ISO 15156-1:2015
Revises: ISO 15156-1:2001
Revises: ISO 15156-1:2001/Cor 1:2005
No corrigenda or amendments available