Paints and varnishes -- Preparation of acid extracts from paints in liquid or powder form
This standard was last reviewed and confirmed* in 2012.
The principle of the method consists in the dilution of a sample with a suitable solvent, separation of the pigment by centrifugation. Three methods, dependent on the binder of the product being examined, are described. Extraction of the separated pigment with hydrochloric acid at a ratio of mass:volume of 1:15, except for the determination of "soluble" lead; in that case, extraction is carried out at a ratio of 1:1000. Evaporation to dryness of the liquid portion obtained by centrifuging, analysis by dry ashing and extraction of the ash with nitric acid. For coating materials in powder form, extraction is carried out without prior separation of the binder.
Document published on: 1984-11-01 Edition: 2 (Monolingual) ICS: 87.040 Status: Published Stage: 90.93 (2012-09-27) TC/SC: ISO/TC 256 Number of Pages: 6
Revises: ISO 6713:1980
No corrigenda or amendments available