Including plate, sheet and strip
Steel strips for springs, see 77.140.25
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities | 60.60 | ISO/TC 17/SC 12 |
| ISO 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities | 60.60 | ISO/TC 17/SC 12 |
| ISO 3575:2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities | 60.60 | ISO/TC 17/SC 12 |
| ISO 4950-1:1995 High yield strength flat steel products -- Part 1: General requirements | 90.93 | ISO/TC 17/SC 3 |
| ISO 4950-1:1995/Amd 1:2003 | 60.60 | ISO/TC 17/SC 3 |
| ISO 4950-2:1995 High yield strength flat steel products -- Part 2: Products supplied in the normalized or controlled rolled condition | 90.93 | ISO/TC 17/SC 3 |
| ISO 4950-2:1995/Amd 1:2003 | 60.60 | ISO/TC 17/SC 3 |
| ISO 4950-3:1995 High yield strength flat steel products -- Part 3: Products supplied in the heat-treated (quenched + tempered) condition | 90.93 | ISO/TC 17/SC 3 |
| ISO 4950-3:1995/Amd 1:2003 | 60.60 | ISO/TC 17/SC 3 |
| ISO 4960:2007 Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % | 90.93 | ISO/TC 17/SC 12 |
| ISO 4995:2008 Hot-rolled steel sheet of structural quality | 90.93 | ISO/TC 17/SC 12 |
| ISO 4996:2007 Hot-rolled steel sheet of high yield stress structural quality | 90.93 | ISO/TC 17/SC 12 |
| ISO 4997:2007 Cold-reduced carbon steel sheet of structural quality | 90.93 | ISO/TC 17/SC 12 |
| ISO/CD 4998 Continuous hot-dip zinc-coated carbon steel sheet of structural quality | 30.60 | ISO/TC 17/SC 12 |
| ISO 4998:2011 Continuous hot-dip zinc-coated carbon steel sheet of structural quality | 90.92 | ISO/TC 17/SC 12 |
| ISO 4999:2011 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities | 90.92 | ISO/TC 17/SC 12 |
| ISO/CD 4999 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities | 30.60 | ISO/TC 17/SC 12 |
| ISO 5000:2011 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities | 60.60 | ISO/TC 17/SC 12 |
| ISO 5001:2012 Cold-reduced carbon steel sheet for vitreous enamelling | 60.60 | ISO/TC 17/SC 12 |
| ISO/FDIS 5002 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities | 50.00 | ISO/TC 17/SC 12 |
| ISO 5002:2008 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities | 90.92 | ISO/TC 17/SC 12 |
| ISO 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities | 60.60 | ISO/TC 17/SC 12 |
| ISO 5951:2013 Hot-rolled steel sheet of higher yield strength with improved formability | 60.60 | ISO/TC 17/SC 12 |
| ISO 5952:2011 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance | 60.60 | ISO/TC 17/SC 12 |
| ISO/CD 5954 Cold-reduced carbon steel sheet according to hardness requirements | 30.60 | ISO/TC 17/SC 12 |
| ISO 5954:2007 Cold-reduced carbon steel sheet according to hardness requirements | 90.92 | ISO/TC 17/SC 12 |
| ISO 6316:2012 Hot-rolled steel strip of structural quality | 60.60 | ISO/TC 17/SC 12 |
| ISO 6317:2008 Hot-rolled carbon steel strip of commercial and drawing qualities | 90.93 | ISO/TC 17/SC 12 |
| ISO 6930-1:2001 High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels | 90.93 | ISO/TC 17/SC 3 |
| ISO 6930-2:2004 High yield strength steel plates and wide flats for cold forming -- Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels | 90.93 | ISO/TC 17/SC 3 |
| ISO/CD 6932 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % | 30.60 | ISO/TC 17/SC 12 |
| ISO 6932:2008 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % | 90.92 | ISO/TC 17/SC 12 |
| ISO 7452:2013 Hot-rolled steel plates -- Tolerances on dimensions and shape | 60.60 | ISO/TC 17/SC 3 |
| ISO/DIS 7778 Through-thickness characteristics for steel products | 40.99 | ISO/TC 17/SC 3 |
| ISO 7778:1983 Steel plate with specified through-thickness characteristics | 90.92 | ISO/TC 17/SC 3 |
| ISO 7788:1985 Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements | 90.93 | ISO/TC 17/SC 3 |
| ISO 9034:1987 Hot-rolled structural steel wide flats -- Tolerances on dimensions and shape | 90.93 | ISO/TC 17/SC 3 |
| ISO 9328-1:2011 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements | 60.60 | ISO/TC 17/SC 10 |
| ISO 9328-2:2011 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties | 60.60 | ISO/TC 17/SC 10 |
| ISO 9328-3:2011 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized | 60.60 | ISO/TC 17/SC 10 |
| ISO 9328-4:2011 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties | 60.60 | ISO/TC 17/SC 10 |
| ISO 9328-5:2011 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled | 60.60 | ISO/TC 17/SC 10 |
| ISO 9328-6:2011 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered | 60.60 | ISO/TC 17/SC 10 |
| ISO 9328-7:2011 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels | 60.60 | ISO/TC 17/SC 10 |
| ISO 9364:2011 Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities | 60.60 | ISO/TC 17/SC 12 |
| ISO 9444-1:2009 Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths | 60.60 | ISO/TC 17/SC 4 |
| ISO 9444-2:2009 Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate | 60.60 | ISO/TC 17/SC 4 |
| ISO 9445-1:2009 Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths | 60.60 | ISO/TC 17/SC 4 |
| ISO 9445-2:2009 Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and plate/sheet | 60.60 | ISO/TC 17/SC 4 |
| ISO 9473-1:2006 Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled strip steel | 90.93 | ISO/TC 72/SC 3 |
| ISO 9473-2:2006 Textile machinery and accessories -- Strip steel for dents of reeds -- Part 2: Hardened strip steel | 90.93 | ISO/TC 72/SC 3 |
| ISO 10384:2012 Hot-rolled carbon steel sheet as defined by chemical composition | 60.60 | ISO/TC 17/SC 12 |
| ISO 11949:1995 Cold-reduced electrolytic tinplate | 90.92 | ISO/TC 17/SC 9 |
| ISO/WD 11949 Cold-reduced electrolytic tinplate | 20.60 | ISO/TC 17/SC 9 |
| ISO/WD 11950 Cold-reduced electrolytic chromium/chromium oxide-coated steel | 20.60 | ISO/TC 17/SC 9 |
| ISO 11950:1995 Cold-reduced electrolytic chromium/chromium oxide-coated steel | 90.92 | ISO/TC 17/SC 9 |
| ISO/WD 11951 Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel | 20.60 | ISO/TC 17/SC 9 |
| ISO 11951:1995 Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel | 90.92 | ISO/TC 17/SC 9 |
| ISO 13887:2011 Cold-reduced steel sheet of higher yield strength with improved formability | 60.60 | ISO/TC 17/SC 12 |
| ISO 13976:2005 Hot-rolled steel sheet in coils of structural quality and heavy thickness | 90.93 | ISO/TC 17/SC 12 |
| ISO 14590:2005 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability | 90.93 | ISO/TC 17/SC 12 |
| ISO 14788:2011 Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet | 60.60 | ISO/TC 17/SC 12 |
| ISO 15177:2012 Hot-rolled twin-roll cast carbon steel sheet of commercial quality | 60.60 | ISO/TC 17/SC 12 |
| ISO 15179:2012 Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel | 60.60 | ISO/TC 17/SC 12 |
| ISO 15208:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality | 60.60 | ISO/TC 17/SC 12 |
| ISO 15211:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel | 60.60 | ISO/TC 17/SC 12 |
| ISO 16160:2012 Hot-rolled steel sheet products -- Dimensional and shape tolerances | 60.60 | ISO/TC 17/SC 12 |
| ISO 16162:2012 Cold-rolled steel sheet products -- Dimensional and shape tolerances | 60.60 | ISO/TC 17/SC 12 |
| ISO 16163:2012 Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances | 60.60 | ISO/TC 17/SC 12 |
| ISO 16172:2011 Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe | 60.60 | ISO/TC 17/SC 12 |
| ISO/CD 17577 Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm | 30.00 | ISO/TC 17/SC 7 |
| ISO 17577:2006 Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm | 90.92 | ISO/TC 17/SC 7 |
| ISO 18286:2008 Hot-rolled stainless steel plates -- Tolerances on dimensions and shape | 90.93 | ISO/TC 17/SC 4 |
| ISO 20805:2011 Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming | 60.60 | ISO/TC 17/SC 12 |
