Including water meters in buildings
External water conveyance systems, see 93.025
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 559:1991 Steel tubes for water and sewage | 90.93 | ISO/TC 5/SC 1 |
| ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 2 |
| ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications | 60.60 | ISO/TC 5/SC 2 |
| ISO 2531:2009/Cor 1:2010 | 60.60 | ISO/TC 5/SC 2 |
| ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 3822-1:1999 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement | 90.93 | ISO/TC 43/SC 2 |
| ISO 3822-1:1999/Amd 1:2008 Measurement uncertainty | 60.60 | ISO/TC 43/SC 2 |
| ISO 3822-2:1995 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves | 90.93 | ISO/TC 43/SC 2 |
| ISO 3822-3:1997 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances | 90.20 | ISO/TC 43/SC 2 |
| ISO 3822-3:1997/Amd 1:2009 | 60.60 | ISO/TC 43/SC 2 |
| ISO 3822-4:1997 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances | 90.20 | ISO/TC 43/SC 2 |
| ISO/FDIS 4064-1 Water meters for cold potable water and hot water -- Part 1: Metrological and technical requirements | 50.00 | ISO/TC 30/SC 7 |
| ISO 4064-1:2005 Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 1: Specifications | 90.92 | ISO/TC 30/SC 7 |
| ISO 4064-2:2005 Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 2: Installation requirements | 90.92 | ISO/TC 30/SC 7 |
| ISO/FDIS 4064-2 Water meters for cold potable water and hot water -- Part 2: Test methods | 50.00 | ISO/TC 30/SC 7 |
| ISO/FDIS 4064-3 Water meters for cold potable water and hot water -- Part 3: Test report format | 50.00 | ISO/TC 30/SC 7 |
| ISO 4064-3:2005 Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 3: Test methods and equipment | 90.92 | ISO/TC 30/SC 7 |
| ISO/FDIS 4064-4 Water meters for cold potable water and hot water -- Part 4: Non-metrological requirements not covered in ISO 4064-1 | 50.00 | ISO/TC 30/SC 7 |
| ISO/FDIS 4064-5 Water meters for cold potable water and hot water -- Part 5: Installation requirements | 50.00 | ISO/TC 30/SC 7 |
| ISO/TR 4191:1989 Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying | 90.93 | ISO/TC 138/SC 2 |
| ISO/DTR 4191 Plastics piping systems for water supply -- Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) -- Guidance for installation | 30.20 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General | 90.93 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007/CD Amd 1 | 30.60 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007/Cor 1:2008 | 60.60 | ISO/TC 138/SC 2 |
| ISO 4427-2:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes | 90.93 | ISO/TC 138/SC 2 |
| ISO 4427-3:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings | 90.93 | ISO/TC 138/SC 2 |
| ISO 4427-5:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system | 90.93 | ISO/TC 138/SC 2 |
| ISO 4633:2002 Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials | 90.92 | ISO/TC 45/SC 4 |
| ISO 7259:1988 Predominantly key-operated cast iron gate valves for underground use | 90.92 | ISO/TC 153/SC 1 |
| ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints | 90.93 | ISO/TC 138/SC 5 |
| ISO 10508:2006 Plastics piping systems for hot and cold water installations -- Guidance for classification and design | 90.93 | ISO/TC 138/SC 2 |
| ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 90.20 | ISO/TC 138/SC 6 |
| ISO 10639:2004/Amd 1:2011 | 60.60 | ISO/TC 138/SC 6 |
| ISO/CD 11177 Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing | 30.00 | ISO/TC 107 |
| ISO 13056:2011 Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum | 60.60 | ISO/TC 138/SC 5 |
| ISO/CD 13844 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure | 30.60 | ISO/TC 138/SC 5 |
| ISO 13844:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure | 90.92 | ISO/TC 138/SC 2 |
| ISO 13845:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection | 90.92 | ISO/TC 138/SC 2 |
| ISO/CD 13845 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection | 30.60 | ISO/TC 138/SC 5 |
| ISO 14236:2000 Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems | 90.93 | ISO/TC 138/SC 2 |
| ISO 15874-1:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General | 60.60 | ISO/TC 138/SC 2 |
| ISO 15874-2:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 15874-3:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO 15874-5:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 2 |
| ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO 15875-1:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 1: General | 90.93 | ISO/TC 138/SC 2 |
| ISO 15875-1:2003/Amd 1:2007 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15875-2:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes | 90.93 | ISO/TC 138/SC 2 |
| ISO 15875-2:2003/Amd 1:2007 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15875-3:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings | 90.93 | ISO/TC 138/SC 2 |
| ISO 15875-5:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system | 90.93 | ISO/TC 138/SC 2 |
| ISO 15875-5:2003/Cor 1:2007 | 60.60 | ISO/TC 138/SC 2 |
| ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO 15876-1:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 1: General | 90.92 | ISO/TC 138/SC 2 |
| ISO 15876-1:2003/Amd 1:2007 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15876-2:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes | 90.92 | ISO/TC 138/SC 2 |
| ISO 15876-2:2003/Amd 1:2007 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15876-3:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings | 90.92 | ISO/TC 138/SC 2 |
| ISO 15876-5:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system | 90.92 | ISO/TC 138/SC 2 |
| ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO 15877-1:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-1:2009/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-2:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-2:2009/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-3:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-3:2009/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-5:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-5:2009/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO/DIS 16422.2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications | 40.60 | ISO/TC 138/SC 2 |
| ISO 16422:2006 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications | 90.92 | ISO/TC 138/SC 2 |
| ISO/CD 16631 Ductile iron pipes, fittings, accessories and their joints for water distribution | 30.60 | ISO/TC 5/SC 2 |
| ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 1: General | 90.93 | ISO/TC 138/SC 2 |
| ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes | 90.93 | ISO/TC 138/SC 2 |
| ISO 21003-2:2008/Amd 1:2011 | 60.60 | ISO/TC 138/SC 2 |
| ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings | 90.93 | ISO/TC 138/SC 2 |
| ISO 21003-5:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 5: Fitness for purpose of the system | 90.93 | ISO/TC 138/SC 2 |
| ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO/TS 21003-7:2008/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO 22158:2011 Input/output protocols and electronic interfaces for water meters -- Requirements | 60.60 | ISO/TC 30/SC 7 |
| ISO 22391-1:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General | 60.60 | ISO/TC 138/SC 2 |
| ISO 22391-2:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 22391-3:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO 22391-5:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 2 |
| ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 7: Guidance for the assessment of conformity | 60.60 | ISO/TC 138/SC 2 |
| ISO 23711:2003 Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers | 90.20 | ISO/TC 45/SC 4 |
| ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques | 60.60 | ISO/TC 138/SC 6 |
| ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes | 60.60 | ISO/TC 138/SC 2 |
