Home

Standards catalogue

Subscribe to updates

85.060: Paper and board

Items to be displayed:

Standard and/or projectStage TC
ISO 186:2002
Paper and board -- Sampling to determine average quality
90.93 ISO/TC 6/SC 2
ISO 187:1990
Paper, board and pulps -- Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
90.93 ISO/TC 6/SC 2
ISO 217:2013
Paper -- Untrimmed sizes -- Designation and tolerances for primary and supplementary ranges, and indication of machine direction
60.60 ISO/TC 6
ISO 287:2009
Paper and board -- Determination of moisture content of a lot -- Oven-drying method
90.60 ISO/TC 6/SC 2
ISO 534:2011
Paper and board -- Determination of thickness, density and specific volume
60.60 ISO/TC 6/SC 2
ISO 535:2014
Paper and board -- Determination of water absorptiveness -- Cobb method
60.60 ISO/TC 6/SC 2
ISO 536:2012
Paper and board -- Determination of grammage
60.60 ISO/TC 6/SC 2
ISO 638:2008
Paper, board and pulps -- Determination of dry matter content -- Oven-drying method
90.93 ISO/TC 6
ISO 1924-2:2008
Paper and board -- Determination of tensile properties -- Part 2: Constant rate of elongation method (20 mm/min)
90.93 ISO/TC 6/SC 2
ISO 1924-3:2005
Paper and board -- Determination of tensile properties -- Part 3: Constant rate of elongation method (100 mm/min)
90.60 ISO/TC 6/SC 2
ISO 1974:2012
Paper -- Determination of tearing resistance -- Elmendorf method
60.60 ISO/TC 6/SC 2
ISO/DIS 2144
Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C
40.99 ISO/TC 6
ISO 2144:1997
Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C
90.92 ISO/TC 6
ISO 2469:2014
Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)
60.60 ISO/TC 6
ISO 2470-1:2009
Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness)
90.20 ISO/TC 6
ISO 2470-2:2008
Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness)
90.93 ISO/TC 6
ISO 2471:2008
Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method
90.93 ISO/TC 6
ISO 2493-1:2010
Paper and board -- Determination of bending resistance -- Part 1: Constant rate of deflection
60.60 ISO/TC 6/SC 2
ISO 2493-2:2011
Paper and board -- Determination of bending resistance -- Part 2: Taber-type tester
60.60 ISO/TC 6/SC 2
ISO 2528:1995
Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (dish) method
90.93 ISO/TC 6/SC 2
ISO 2758:2014
Paper -- Determination of bursting strength
60.60 ISO/TC 6/SC 2
ISO 2759:2014
Board -- Determination of bursting strength
60.60 ISO/TC 6/SC 2
ISO 3034:2011
Corrugated fibreboard -- Determination of single sheet thickness
60.60 ISO/TC 6/SC 2
ISO 3035:2011
Corrugated fibreboard -- Determination of flat crush resistance
60.60 ISO/TC 6/SC 2
ISO 3036:1975
Board -- Determination of puncture resistance
90.60 ISO/TC 6/SC 2
ISO 3037:2013
Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)
60.60 ISO/TC 6/SC 2
ISO 3038:1975
Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion
90.93 ISO/TC 6/SC 2
ISO 3039:2010
Corrugated fibreboard -- Determination of grammage of the component papers after separation
60.60 ISO/TC 6/SC 2
ISO 3689:1983
Paper and board -- Determination of bursting strength after immersion in water
90.60 ISO/TC 6/SC 2
ISO 3781:2011
Paper and board -- Determination of tensile strength after immersion in water
60.60 ISO/TC 6/SC 2
ISO 3783:2006
Paper and board -- Determination of resistance to picking -- Accelerated speed method using the IGT-type tester (electric model)
90.93 ISO/TC 6/SC 2
ISO 4046-1:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 1: Alphabetical index
95.20 ISO/TC 6
ISO 4046-4:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 4: Paper and board grades and converted products
95.20 ISO/TC 6
ISO 4046-5:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 5: Properties of pulp, paper and board
95.20 ISO/TC 6
ISO 4094:2005
Paper, board and pulps -- International calibration of testing apparatus -- Nomination and acceptance of standardizing and authorized laboratories
90.92 ISO/TC 6
ISO 5626:1993
Paper -- Determination of folding endurance
90.60 ISO/TC 6/SC 2
ISO 5627:1995
Paper and board -- Determination of smoothness (Bekk method)
90.93 ISO/TC 6/SC 2
ISO 5627:1995/Cor 1:2002
60.60 ISO/TC 6/SC 2
ISO 5628:2012
Paper and board -- Determination of bending stiffness -- General principles for two-point, three-point and four-point methods
60.60 ISO/TC 6/SC 2
ISO 5629:1983
Paper and board -- Determination of bending stiffness -- Resonance method
90.60 ISO/TC 6/SC 2
ISO 5630-1:1991
Paper and board -- Accelerated ageing -- Part 1: Dry heat treatment at 105 degrees C
90.93 ISO/TC 6/SC 2
ISO 5630-3:1996
Paper and board -- Accelerated ageing -- Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
90.93 ISO/TC 6/SC 2
ISO 5630-4:1986
Paper and board -- Accelerated ageing -- Part 4: Dry heat treatment at 120 or 150 degrees C
90.93 ISO/TC 6/SC 2
ISO 5630-5:2008
Paper and board -- Accelerated ageing -- Part 5: Exposure to elevated temperature at 100 degrees C
90.93 ISO/TC 6/SC 2
ISO 5630-6:2009
Paper and board -- Accelerated ageing -- Part 6: Exposure to atmospheric pollution (nitrogen dioxide)
90.60 ISO/TC 6/SC 2
ISO 5630-7:2014
Paper and board -- Accelerated ageing -- Part 7: Exposure to light
60.60 ISO/TC 6/SC 2
ISO/CD 5631-1
Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees)
30.99 ISO/TC 6
ISO 5631-1:2009
Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees)
90.92 ISO/TC 6
ISO 5631-2:2014
Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees)
90.92 ISO/TC 6
ISO/CD 5631-2
Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees)
30.99 ISO/TC 6
ISO/CD 5631-3
Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees)
30.99 ISO/TC 6
ISO 5631-3:2014
Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees)
90.92 ISO/TC 6
ISO 5633:1983
Paper and board -- Determination of resistance to water penetration
90.60 ISO/TC 6/SC 2
ISO 5635:1978
Paper -- Measurement of dimensional change after immersion in water
90.93 ISO/TC 6/SC 2
ISO 5636-1:1984
Paper and board -- Determination of air permeance (medium range) -- Part 1: General method
90.93 ISO/TC 6/SC 2
ISO 5636-3:2013
Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method
60.60 ISO/TC 6/SC 2
ISO 5636-4:2013
Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method
60.60 ISO/TC 6/SC 2
ISO 5636-5:2013
Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method
60.60 ISO/TC 6/SC 2
ISO/DIS 5636-6
Paper and board -- Determination of air permeance and air resistance (medium range) -- Part 6: Oken method
40.20 ISO/TC 6/SC 2
ISO 5637:1989
Paper and board -- Determination of water absorption after immersion in water
90.93 ISO/TC 6/SC 2
ISO 5638:1978
Solid fibreboard -- Determination of grammage of single layers
90.93 ISO/TC 6/SC 2
ISO 5647:1990
Paper and board -- Determination of titanium dioxide content
90.93 ISO/TC 6
ISO 6587:1992
Paper, board and pulps -- Determination of conductivity of aqueous extracts
90.93 ISO/TC 6
ISO 6588-1:2012
Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction
60.60 ISO/TC 6
ISO 6588-2:2012
Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction
60.60 ISO/TC 6
ISO 7263:2011
Corrugating medium -- Determination of the flat crush resistance after laboratory fluting
60.60 ISO/TC 6/SC 2
ISO 8226-1:1994
Paper and board -- Measurement of hygroexpansivity -- Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
90.93 ISO/TC 6/SC 2
ISO 8226-2:1990
Paper and board -- Measurement of hygroexpansivity -- Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %
90.93 ISO/TC 6/SC 2
ISO 8254-1:2009
Paper and board -- Measurement of specular gloss -- Part 1: 75 degree gloss with a converging beam, TAPPI method
90.60 ISO/TC 6
ISO 8254-2:2003
Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam, DIN method
90.92 ISO/TC 6
ISO/DIS 8254-2
Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam, DIN method
40.99 ISO/TC 6
ISO 8254-3:2004
Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method
90.92 ISO/TC 6
ISO/CD 8254-3
Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method
30.99 ISO/TC 6
ISO/FDIS 8784-1
Pulp, paper and board -- Microbiological examination -- Part 1: Enumeration of bacteria and bacterial spores based on disintegration
50.20 ISO/TC 6/SC 2
ISO 8784-1:2005
Pulp, paper and board -- Microbiological examination -- Part 1: Total count of bacteria, yeast and mould based on disintegration
90.92 ISO/TC 6/SC 2
ISO 8787:1986
Paper and board -- Determination of capillary rise -- Klemm method
90.93 ISO/TC 6/SC 2
ISO 8791-1:1986
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 1: General method
90.93 ISO/TC 6/SC 2
ISO 8791-2:2013
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method
60.60 ISO/TC 6/SC 2
ISO 8791-3:2005
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method
90.93 ISO/TC 6/SC 2
ISO 8791-4:2007
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 4: Print-surf method
90.93 ISO/TC 6/SC 2
ISO 9184-1:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 1: General method
90.93 ISO/TC 6
ISO 9184-2:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 2: Staining guide
90.93 ISO/TC 6
ISO 9184-3:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test
90.93 ISO/TC 6
ISO 9184-4:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test
90.93 ISO/TC 6
ISO 9184-5:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar)
90.93 ISO/TC 6
ISO 9184-6:1994
Paper, board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness
90.93 ISO/TC 6
ISO 9184-7:1994
Paper, board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor
90.93 ISO/TC 6
ISO 9197:2006
Paper, board and pulps -- Determination of water-soluble chlorides
90.93 ISO/TC 6
ISO 9198:2001
Paper, board and pulp -- Determination of water-soluble sulfates
90.93 ISO/TC 6
ISO 9416:2009
Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
90.60 ISO/TC 6
ISO 9706:1994
Information and documentation -- Paper for documents -- Requirements for permanence
90.93 ISO/TC 46/SC 10
ISO 9895:2008
Paper and board -- Compressive strength -- Short-span test
90.93 ISO/TC 6/SC 2
ISO 9932:1990
Paper and board -- Determination of water vapour transmission rate of sheet materials -- Dynamic sweep and static gas methods
90.93 ISO/TC 6/SC 2
ISO/WD TR 10688
Paper, board and pulps -- Basic equations for optical properties
20.20 ISO/TC 6
ISO 10716:1994
Paper and board -- Determination of alkali reserve
90.93 ISO/TC 6
ISO 10775:2013
Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method
60.60 ISO/TC 6
ISO 11093-1:1994
Paper and board -- Testing of cores -- Part 1: Sampling
90.93 ISO/TC 6
ISO 11093-2:1994
Paper and board -- Testing of cores -- Part 2: Conditioning of test samples
90.93 ISO/TC 6
ISO 11093-3:1994
Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method
90.93 ISO/TC 6
ISO/CD 11093-4
Paper and board -- Testing of cores -- Part 4: Measurement of dimensions
30.99 ISO/TC 6
ISO 11093-4:1997
Paper and board -- Testing of cores -- Part 4: Measurement of dimensions
90.92 ISO/TC 6
ISO 11093-5:2009
Paper and board -- Testing of cores -- Part 5: Determination of characteristics of concentric rotation
90.20 ISO/TC 6
ISO 11093-5:2009/Cor 1:2010
60.60 ISO/TC 6
ISO 11093-6:2005
Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
90.93 ISO/TC 6
ISO 11093-7:2011
Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
60.60 ISO/TC 6
ISO 11093-8:2012
Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
60.60 ISO/TC 6
ISO 11093-8:2012/Cor 1:2013
60.60 ISO/TC 6
ISO 11093-9:2006
Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance
90.93 ISO/TC 6
ISO 11108:1996
Information and documentation -- Archival paper -- Requirements for permanence and durability
90.93 ISO/TC 46/SC 10
ISO/DIS 11475
Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
40.00 ISO/TC 6
ISO 11475:2004
Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
90.92 ISO/TC 6
ISO 11476:2010
Paper and board -- Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)
90.92 ISO/TC 6
ISO/DIS 11476
Paper and board -- Determination of CIE whiteness, C/2¢ª (indoor illumination conditions)
40.00 ISO/TC 6
ISO 11480:1997
Pulp, paper and board -- Determination of total chlorine and organically bound chlorine
90.93 ISO/TC 6
ISO 11556:2005
Paper and board -- Determination of curl using a single vertically suspended test piece
90.93 ISO/TC 6/SC 2
ISO 12192:2011
Paper and board -- Determination of compressive strength -- Ring crush method
60.60 ISO/TC 6/SC 2
ISO 12625-1:2011
Tissue paper and tissue products -- Part 1: General guidance on terms
60.60 ISO/TC 6/SC 2
ISO 12625-3:2014
Tissue paper and tissue products -- Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
60.60 ISO/TC 6/SC 2
ISO 12625-4:2005
Tissue paper and tissue products -- Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
90.92 ISO/TC 6/SC 2
ISO/NP 12625-4
Tissue paper and tissue products -- Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
10.99 ISO/TC 6/SC 2
ISO/NP 12625-5
Tissue paper and tissue products -- Part 5: Determination of wet tensile strength
10.99 ISO/TC 6/SC 2
ISO 12625-5:2005
Tissue paper and tissue products -- Part 5: Determination of wet tensile strength
90.92 ISO/TC 6/SC 2
ISO/NP 12625-6
Tissue paper and tissue products -- Part 6: Determination of grammage
10.99 ISO/TC 6/SC 2
ISO 12625-6:2005
Tissue paper and tissue products -- Part 6: Determination of grammage
90.92 ISO/TC 6/SC 2
ISO 12625-7:2014
Tissue paper and tissue products -- Part 7: Determination of optical properties -- Measurement of brightness and colour with D65/10° (outdoor daylight)
60.60 ISO/TC 6/SC 2
ISO 12625-8:2010
Tissue paper and tissue products -- Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
60.60 ISO/TC 6/SC 2
ISO 12625-9:2005
Tissue paper and tissue products -- Part 9: Determination of ball burst strength
90.92 ISO/TC 6/SC 2
ISO/FDIS 12625-9
Tissue paper and tissue products -- Part 9: Determination of ball burst strength
50.00 ISO/TC 6/SC 2
ISO 12625-11:2012
Tissue paper and tissue products -- Part 11: Determination of wet ball burst strength
60.60 ISO/TC 6/SC 2
ISO 12625-12:2010
Tissue paper and tissue products -- Part 12: Determination of tensile strength of perforated lines -- Calculation of perforation efficiency
60.60 ISO/TC 6/SC 2
ISO/FDIS 12625-15
Tissue paper and tissue products -- Part 15: Determination of optical properties -- Measurement of brightness and colour with C/2° (indoor daylight) illuminant
50.00 ISO/TC 6/SC 2
ISO/FDIS 12625-16
Tissue paper and tissue products -- Part 16: Determination of optical properties -- Opacity (paper backing) -- Diffuse reflectance method
50.00 ISO/TC 6/SC 2
ISO 12830:2011
Paper, board and pulps -- Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
60.60 ISO/TC 6
ISO 13542:2006
Paper and board -- Specification for internal diameters of cores for reels
90.93 ISO/TC 6
ISO 13821:2002
Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method
90.93 ISO/TC 6/SC 2
ISO 14968:1999
Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets
90.93 ISO/TC 6/SC 2
ISO 15318:1999
Pulp, paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB)
90.93 ISO/TC 6
ISO 15320:2011
Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract
60.60 ISO/TC 6
ISO 15359:1999
Paper and board -- Determination of the static and kinetic coefficients of friction -- Horizontal plane method
90.93 ISO/TC 6/SC 2
ISO 15754:2009
Paper and board -- Determination of z-directional tensile strength
90.60 ISO/TC 6/SC 2
ISO 15755:1999
Paper and board -- Estimation of contraries
90.93 ISO/TC 6/SC 2
ISO/DIS 16260
Paper and board - Determination of internal bond strength
40.99 ISO/TC 6/SC 2
ISO 16532-1:2008
Paper and board -- Determination of grease resistance -- Part 1: Permeability test
90.93 ISO/TC 6/SC 2
ISO 16532-2:2007
Paper and board -- Determination of grease resistance -- Part 2: Surface repellency test
90.93 ISO/TC 6/SC 2
ISO 16532-3:2010
Paper and board -- Determination of grease resistance -- Part 3: Turpentine test for voids in glassine and greaseproof papers
60.60 ISO/TC 6/SC 2
ISO 16945:2014
Corrugating medium -- Determination of the edge crush resistance after laboratory fluting
60.60 ISO/TC 6/SC 2
ISO 17812:2007
Paper, board and pulps -- Determination of total magnesium, total calcium, total manganese, total iron and total copper
90.93 ISO/TC 6
ISO/TS 17958:2013
Paper and board -- Determination of fracture toughness -- Constant rate of elongation method (1,7 mm/s)
60.60 ISO/TC 6/SC 2
ISO/CD 18522-1
Paper and board -- Automated testing -- Part 1: Automated off-line testing of physical properties for CD (cross direction) profiles
30.99 ISO/TC 6
ISO 22414:2004
Paper -- Cut-size office paper -- Measurement of edge quality
90.93 ISO/TC 6/SC 2
ISO 22754:2008
Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
90.93 ISO/TC 6
ISO 22891:2013
Paper -- Determination of transmittance by diffuse reflectance measurement
60.60 ISO/TC 6
ISO/AWI TR 24498
Paper, board and pulps -- Estimation of uncertainty for test methods
20.00 ISO/TC 6
ISO/TR 24498:2006
Paper, board and pulps -- Estimation of uncertainty for test methods
90.92 ISO/TC 6
ISO/TR 25477:2008
Paper, board and pulps - Basic guidelines for image analysis measurements
60.60 ISO/TC 6