Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 187:1990 Paper, board and pulps -- Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples | 90.20 | ISO/TC 6/SC 2 |
| ISO 302:2004 Pulps -- Determination of Kappa number | 90.93 | ISO/TC 6 |
| ISO 638:2008 Paper, board and pulps -- Determination of dry matter content -- Oven-drying method | 90.93 | ISO/TC 6 |
| ISO 692:1982 Pulps -- Determination of alkali solubility | 90.93 | ISO/TC 6 |
| ISO 699:1982 Pulps -- Determination of alkali resistance | 90.20 | ISO/TC 6 |
| ISO 776:2011 Pulps -- Determination of acid-insoluble ash | 60.60 | ISO/TC 6 |
| ISO 801-1:1994 Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form | 90.93 | ISO/TC 6 |
| ISO 801-2:1994 Pulps -- Determination of saleable mass in lots -- Part 2: Pulps (such as flash-dried pulps) baled in slabs | 90.93 | ISO/TC 6 |
| ISO 801-3:1994 Pulps -- Determination of saleable mass in lots -- Part 3: Unitized bales | 90.93 | ISO/TC 6 |
| ISO 1762:2001 Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees C | 90.93 | ISO/TC 6 |
| ISO 2469:2007 Paper, board and pulps -- Measurement of diffuse radiance factor | 90.92 | ISO/TC 6 |
| ISO/DIS 2469 Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor) | 40.00 | ISO/TC 6 |
| ISO 2470-1:2009 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness) | 60.60 | ISO/TC 6 |
| ISO 2470-2:2008 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness) | 90.93 | ISO/TC 6 |
| ISO 3260:1982 Pulps -- Determination of chlorine consumption (Degree of delignification) | 90.20 | ISO/TC 6 |
| ISO 3688:1999 Pulps -- Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness) | 90.93 | ISO/TC 6 |
| ISO 4046-1:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 1: Alphabetical index | 90.20 | ISO/TC 6 |
| ISO 4046-2:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 2: Pulping terminology | 90.20 | ISO/TC 6 |
| ISO 4046-5:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 5: Properties of pulp, paper and board | 90.20 | ISO/TC 6 |
| ISO 4094:2005 Paper, board and pulps -- International calibration of testing apparatus -- Nomination and acceptance of standardizing and authorized laboratories | 90.93 | ISO/TC 6 |
| ISO 4119:1995 Pulps -- Determination of stock concentration | 90.93 | ISO/TC 6 |
| ISO 5263-1:2004 Pulps -- Laboratory wet disintegration -- Part 1: Disintegration of chemical pulps | 90.20 | ISO/TC 6 |
| ISO 5263-2:2004 Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degrees C | 90.20 | ISO/TC 6 |
| ISO 5263-3:2004 Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at > 85 degrees C | 90.20 | ISO/TC 6 |
| ISO 5264-1:1979 Pulps -- Laboratory beating -- Part 1: Valley beater method | 90.20 | ISO/TC 6 |
| ISO 5264-2:2011 Pulps -- Laboratory beating -- Part 2: PFI mill method | 60.60 | ISO/TC 6 |
| ISO 5267-1:1999 Pulps -- Determination of drainability -- Part 1: Schopper-Riegler method | 90.93 | ISO/TC 6 |
| ISO 5267-1:1999/Cor 1:2001 | 60.60 | ISO/TC 6 |
| ISO 5267-2:2001 Pulps -- Determination of drainability -- Part 2: "Canadian Standard" freeness method | 90.93 | ISO/TC 6 |
| ISO 5269-1:2005 Pulps -- Preparation of laboratory sheets for physical testing -- Part 1: Conventional sheet-former method | 90.93 | ISO/TC 6 |
| ISO 5269-2:2004 Pulps -- Preparation of laboratory sheets for physical testing -- Part 2: Rapid-Köthen method | 90.20 | ISO/TC 6 |
| ISO 5269-3:2008 Pulps -- Preparation of laboratory sheets for physical testing -- Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system | 90.93 | ISO/TC 6 |
| ISO 5270:2012 Pulps -- Laboratory sheets -- Determination of physical properties | 60.60 | ISO/TC 6 |
| ISO 5350-1:2006 Pulps -- Estimation of dirt and shives -- Part 1: Inspection of laboratory sheets by transmitted light | 90.93 | ISO/TC 6 |
| ISO 5350-2:2006 Pulps -- Estimation of dirt and shives -- Part 2: Inspection of mill sheeted pulp by transmitted light | 90.93 | ISO/TC 6 |
| ISO 5350-3:2007 Pulps - Estimation of dirt and shives -- Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method | 90.93 | ISO/TC 6 |
| ISO 5350-4:2006 Pulps -- Estimation of dirt and shives -- Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method | 90.93 | ISO/TC 6 |
| ISO 5351:2010 Pulps -- Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution | 60.60 | ISO/TC 6 |
| ISO 6587:1992 Paper, board and pulps -- Determination of conductivity of aqueous extracts | 90.20 | ISO/TC 6 |
| ISO 6588-1:2012 Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction | 60.60 | ISO/TC 6 |
| ISO 6588-2:2012 Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction | 60.60 | ISO/TC 6 |
| ISO 7213:1981 Pulps -- Sampling for testing | 90.93 | ISO/TC 6 |
| ISO/DIS 8784-1 Pulp, paper and board -- Microbiological examination -- Part 1: Enumeration of bacteria and bacterial spores based on disintegration | 40.99 | ISO/TC 6/SC 2 |
| ISO 8784-1:2005 Pulp, paper and board -- Microbiological examination -- Part 1: Total count of bacteria, yeast and mould based on disintegration | 90.92 | ISO/TC 6/SC 2 |
| ISO 9184-1:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 1: General method | 90.93 | ISO/TC 6 |
| ISO 9184-2:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 2: Staining guide | 90.93 | ISO/TC 6 |
| ISO 9184-3:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test | 90.93 | ISO/TC 6 |
| ISO 9184-4:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test | 90.93 | ISO/TC 6 |
| ISO 9184-5:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar) | 90.93 | ISO/TC 6 |
| ISO 9184-6:1994 Paper, board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness | 90.93 | ISO/TC 6 |
| ISO 9184-7:1994 Paper, board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor | 90.93 | ISO/TC 6 |
| ISO 9197:2006 Paper, board and pulps -- Determination of water-soluble chlorides | 90.93 | ISO/TC 6 |
| ISO 9198:2001 Paper, board and pulp -- Determination of water-soluble sulfates | 90.93 | ISO/TC 6 |
| ISO 9416:2009 Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) | 60.60 | ISO/TC 6 |
| ISO 10376:2011 Pulps -- Determination of mass fraction of fines | 60.60 | ISO/TC 6 |
| ISO/NP TR 10688 Paper, board and pulps -- Basic equations for optical properties | 10.99 | ISO/TC 6 |
| ISO 10775:1995 Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method | 90.92 | ISO/TC 6 |
| ISO/FDIS 10775 Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method | 50.20 | ISO/TC 6 |
| ISO/DTR 11371 Pulps -- Basic guidelines for laboratory refining | 30.60 | ISO/TC 6 |
| ISO 11480:1997 Pulp, paper and board -- Determination of total chlorine and organically bound chlorine | 90.93 | ISO/TC 6 |
| ISO 12830:2011 Paper, board and pulps -- Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium | 60.60 | ISO/TC 6 |
| ISO/NP TR 13159 Pulps - Basic guidelines for fibre characterization | 10.99 | ISO/TC 6 |
| ISO 14436:2010 Pulps -- Standard tap water for drainability measurements -- Conductivity 40 mS/m to 150 mS/m | 60.60 | ISO/TC 6 |
| ISO 14453:1997 Pulps -- Determination of acetone-soluble matter | 90.92 | ISO/TC 6 |
| ISO/DIS 14453 Pulps -- Determination of acetone-soluble matter | 40.20 | ISO/TC 6 |
| ISO 14487:1997 Pulps -- Standard water for physical testing | 90.20 | ISO/TC 6 |
| ISO 15318:1999 Pulp, paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB) | 90.93 | ISO/TC 6 |
| ISO 15320:2011 Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract | 60.60 | ISO/TC 6 |
| ISO 15360-1:2000 Recycled pulps -- Estimation of Stickies and Plastics -- Part 1: Visual method | 90.93 | ISO/TC 6 |
| ISO 15360-2:2001 Recycled pulps -- Estimation of Stickies and Plastics -- Part 2: Image analysis method | 90.92 | ISO/TC 6 |
| ISO/DIS 15360-2 Recycled pulps -- Estimation of Stickies and Plastics -- Part 2: Image analysis method | 40.99 | ISO/TC 6 |
| ISO 15360-2:2001/Cor 1:2007 | 60.60 | ISO/TC 6 |
| ISO 15361:2000 Pulps -- Determination of zero-span tensile strength, wet or dry | 90.93 | ISO/TC 6 |
| ISO/DIS 16065-1 Pulps -- Determination of fibre length by automated optical analysis -- Part 1: Polarized light method | 40.60 | ISO/TC 6 |
| ISO 16065-1:2001 Pulps -- Determination of fibre length by automated optical analysis -- Part 1: Polarized light method | 90.92 | ISO/TC 6 |
| ISO/DIS 16065-2 Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method | 40.60 | ISO/TC 6 |
| ISO 16065-2:2007 Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method | 90.92 | ISO/TC 6 |
| ISO 17812:2007 Paper, board and pulps -- Determination of total magnesium, total calcium, total manganese, total iron and total copper | 90.93 | ISO/TC 6 |
| ISO 22754:2008 Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement | 90.93 | ISO/TC 6 |
| ISO 23713:2005 Pulps -- Determination of fibre coarseness by automated optical analysis -- Polarized light method | 90.93 | ISO/TC 6 |
| ISO 23714:2007 Pulps -- Determination of water retention value (WRV) | 90.92 | ISO/TC 6 |
| ISO/DIS 23714 Pulps -- Determination of water retention value (WRV) | 40.60 | ISO/TC 6 |
| ISO/TR 24498:2006 Paper, board and pulps -- Estimation of uncertainty for test methods | 90.60 | ISO/TC 6 |
| ISO/TR 25477:2008 Paper, board and pulps - Basic guidelines for image analysis measurements | 60.60 | ISO/TC 6 |
| ISO 29681:2009 Paper, board and pulps -- Determination of pH of salted water extracts | 60.60 | ISO/TC 6 |
