Home

Standards catalogue

Subscribe to updates

83.080.10: Thermosetting materials

Including ebonite
Silicones, see 71.100.55

Items to be displayed:

Standard and/or projectStage TC
ISO 60:1977
Plastics -- Determination of apparent density of material that can be poured from a specified funnel
90.93 ISO/TC 61/SC 12
ISO 61:1976
Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel
90.93 ISO/TC 61/SC 12
ISO 75-2:2013
Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
60.60 ISO/TC 61/SC 2
ISO 75-3:2004
Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
90.93 ISO/TC 61/SC 2
ISO 119:1977
Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method
90.93 ISO/TC 61/SC 12
ISO 120:1977
Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric comparison method
90.93 ISO/TC 61/SC 12
ISO 172:1978
Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia
90.93 ISO/TC 61/SC 12
ISO 295:2004
Plastics -- Compression moulding of test specimens of thermosetting materials
90.93 ISO/TC 61/SC 12
ISO 308:1994
Plastics -- Phenolic moulding materials -- Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
90.93 ISO/TC 61/SC 12
ISO 584:1982
Plastics -- Unsaturated polyester resins -- Determination of reactivity at 80 degrees C (conventional method)
90.93 ISO/TC 61/SC 12
ISO 1628-5:1998
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
90.93 ISO/TC 61/SC 9
ISO 2114:2000
Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value
90.93 ISO/TC 61/SC 12
ISO 2535:2001
Plastics -- Unsaturated-polyester resins -- Measurement of gel time at ambient temperature
90.93 ISO/TC 61/SC 12
ISO 2554:1997
Plastics -- Unsaturated polyester resins -- Determination of hydroxyl value
90.93 ISO/TC 61/SC 12
ISO 2577:2007
Plastics -- Thermosetting moulding materials -- Determination of shrinkage
90.93 ISO/TC 61/SC 12
ISO 3001:1999
Plastics -- Epoxy compounds -- Determination of epoxy equivalent
90.93 ISO/TC 61/SC 12
ISO 3521:1997
Plastics -- Unsaturated polyester and epoxy resins -- Determination of overall volume shrinkage
90.93 ISO/TC 61/SC 12
ISO 3521:1997/Cor 1:2003
60.60 ISO/TC 61/SC 12
ISO 3671:1976
Plastics -- Aminoplastic moulding materials -- Determination of volatile matter
90.93 ISO/TC 61/SC 12
ISO 3672-1:2000
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 1: Designation system
90.93 ISO/TC 61/SC 12
ISO 3672-2:2000
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
ISO 3673-1:1996
Plastics -- Epoxy resins -- Part 1: Designation
90.93 ISO/TC 61/SC 12
ISO 3673-2:2012
Plastics -- Epoxy resins -- Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
60.60 ISO/TC 61/SC 12
ISO 4597-1:2005
Plastics -- Hardeners and accelerators for epoxy resins -- Part 1: Designation
90.93 ISO/TC 61/SC 12
ISO 4614:1977
Plastics -- Melamine-formaldehyde mouldings -- Determination of extractable formaldehyde
90.93 ISO/TC 61/SC 12
ISO 4615:1979
Plastics -- Unsaturated polyesters and epoxide resins -- Determination of total chlorine content
90.93 ISO/TC 61/SC 12
ISO 4895:2014
Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize
60.60 ISO/TC 61/SC 12
ISO 7327:1994
Plastics -- Hardeners and accelerators for epoxide resins -- Determination of free acid in acid anhydride
90.93 ISO/TC 61/SC 12
ISO 7808:1992
Plastics -- Thermosetting moulding materials -- Determination of transfer flow
90.93 ISO/TC 61/SC 12
ISO 8619:2003
Plastics -- Phenolic resin powder -- Determination of flow distance on a heated glass plate
90.93 ISO/TC 61/SC 12
ISO 8974:2002
Plastics -- Phenolic resins -- Determination of residual phenol content by gas chromatography
90.93 ISO/TC 61/SC 12
ISO 8975:1989
Plastics -- Phenolic resins -- Determination of pH
90.93 ISO/TC 61/SC 12
ISO 8987:2005
Plastics -- Phenolic resins -- Determination of reactivity on a B-transformation test plate
90.93 ISO/TC 61/SC 12
ISO 8988:2006
Plastics -- Phenolic resins -- Determination of hexamethylenetetramine content -- Kjeldahl method, perchloric acid method and hydrochloric acid method
90.93 ISO/TC 61/SC 12
ISO 8989:1995
Plastics -- Liquid phenolic resins -- Determination of water miscibility
90.93 ISO/TC 61/SC 12
ISO 9396:1997
Plastics -- Phenolic resins -- Determination of the gel time of resols under specific conditions using automatic apparatus
90.93 ISO/TC 61/SC 12
ISO 9702:1996
Plastics -- Amine epoxide hardeners -- Determination of primary, secondary and tertiary amine group nitrogen content
90.93 ISO/TC 61/SC 12
ISO 9771:1995
Plastics -- Phenolic resins -- Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
90.93 ISO/TC 61/SC 12
ISO 9944:1990
Plastics -- Phenolic resins -- Determination of electrical conductivity of resin extracts
90.93 ISO/TC 61/SC 12
ISO 9944:1990/Cor 1:1997
60.60 ISO/TC 61/SC 12
ISO 10082:1999
Plastics -- Phenolic resins -- Classification and test methods
90.93 ISO/TC 61/SC 12
ISO 10724-1:1998
Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 1: General principles and moulding of multipurpose test specimens
90.93 ISO/TC 61/SC 12
ISO 10724-2:1998
Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 2: Small plates
90.93 ISO/TC 61/SC 12
ISO 11248:1993
Plastics -- Thermosetting moulding materials -- Evaluation of short-term performance at elevated temperatures
90.93 ISO/TC 61/SC 12
ISO 11401:1993
Plastics -- Phenolic resins -- Separation by liquid chromatography
90.93 ISO/TC 61/SC 12
ISO 11402:2004
Phenolic, amino and condensation resins -- Determination of free-formaldehyde content
90.93 ISO/TC 61/SC 12
ISO 11409:1993
Plastics -- Phenolic resins -- Determination of heats and temperatures of reaction by differential scanning calorimetry
90.93 ISO/TC 61/SC 12
ISO 14322:2012
Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
60.60 ISO/TC 61/SC 12
ISO 14526-1:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
ISO 14526-2:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
ISO 14526-3:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
ISO 14527-1:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
ISO 14527-2:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
ISO 14527-3:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
ISO 14528-1:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
ISO 14528-2:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
ISO 14528-3:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
ISO 14529-1:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
ISO 14529-2:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
ISO 14529-3:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
ISO 14530-1:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
ISO 14530-2:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
ISO 14530-3:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
ISO 14848:1998
Plastics -- Unsaturated-polyester resins -- Determination of reactivity at 130 degrees C
90.93 ISO/TC 61/SC 12
ISO 14849:1999
Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Indophenol method
90.93 ISO/TC 61/SC 12
ISO 14896:2009
Plastics -- Polyurethane raw materials -- Determination of isocyanate content
90.93 ISO/TC 61/SC 12
ISO 14896:2006/Amd 1:2007
Acceptable variations in the procedure for method B
60.60 ISO/TC 61/SC 12
ISO 14897:2002
Plastics -- Polyols for use in the production of polyurethane -- Determination of water content
90.93 ISO/TC 61/SC 12
ISO 14898:1999
Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Determination of acidity
90.93 ISO/TC 61/SC 12
ISO 14898:1999/Amd 1:2011
60.60 ISO/TC 61/SC 12
ISO 14899:2001
Plastics -- Polyols for use in the production of polyurethane -- Determination of basicity
90.93 ISO/TC 61/SC 12
ISO 14900:2001
Plastics -- Polyols for use in the production of polyurethane -- Determination of hydroxyl number
90.93 ISO/TC 61/SC 12
ISO 14900:2001/Cor 1:2005
60.60 ISO/TC 61/SC 12
ISO 15028:2014
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine
60.60 ISO/TC 61/SC 12
ISO 15063:2011
Plastics -- Polyols for use in the production of polyurethanes -- Determination of hydroxyl number by NIR spectroscopy
60.60 ISO/TC 61/SC 12
ISO 15064:2010
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of the isomer ratio in toluenediisocyanate
60.60 ISO/TC 61/SC 12
ISO 15252-1:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
ISO 15252-2:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
ISO 15252-3:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
ISO 17710:2002
Plastics -- Polyols for use in the production of polyurethane -- Determination of degree of unsaturation by microtitration
90.93 ISO/TC 61/SC 12
ISO 18280:2010
Plastics -- Epoxy resins -- Test methods
60.60 ISO/TC 61/SC 12
ISO 18872:2007
Plastics -- Determination of tensile properties at high strain rates
90.93 ISO/TC 61/SC 2
ISO 21048:2014
Plastics -- Epoxy resins -- Determination of 1,2-glycol content
60.60 ISO/TC 61/SC 12
ISO 21318:2007
Plastics -- Epoxy resins -- Determination of electrical conductivity of aqueous resin extracts
90.93 ISO/TC 61/SC 12
ISO 21627-1:2009
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine
90.93 ISO/TC 61/SC 12
ISO 21627-2:2009
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine
90.93 ISO/TC 61/SC 12
ISO 21627-3:2009
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 3: Total chlorine
90.93 ISO/TC 61/SC 12
ISO 25761:2014
Plastics -- Polyols for use in the production of polyurethanes -- Determination of basicity (total amine value), expressed as percent nitrogen
60.60 ISO/TC 61/SC 12
ISO 26603:2008
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of total chlorine
90.93 ISO/TC 61/SC 12