Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 35:2004 Natural rubber latex concentrate -- Determination of mechanical stability | 90.93 | ISO/TC 45/SC 3 |
| ISO 35:2004/Amd 1:2006 Precision data | 60.60 | ISO/TC 45/SC 3 |
| ISO 123:2001 Rubber latex -- Sampling | 90.93 | ISO/TC 45/SC 3 |
| ISO 124:2011 Latex, rubber -- Determination of total solids content | 90.92 | ISO/TC 45/SC 3 |
| ISO 125:2011 Natural rubber latex concentrate -- Determination of alkalinity | 60.60 | ISO/TC 45/SC 3 |
| ISO 126:2005 Natural rubber latex concentrate -- Determination of dry rubber content | 90.20 | ISO/TC 45/SC 3 |
| ISO 127:2012 Rubber, natural latex concentrate -- Determination of KOH number | 60.60 | ISO/TC 45/SC 3 |
| ISO 248-1:2011 Rubber, raw -- Determination of volatile-matter content -- Part 1: Hot-mill method and oven method | 60.60 | ISO/TC 45/SC 2 |
| ISO 248-2:2012 Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit | 60.60 | ISO/TC 45/SC 2 |
| ISO 249:1995 Rubber, raw natural -- Determination of dirt content | 90.92 | ISO/TC 45/SC 2 |
| ISO 498:1992 Natural rubber latex concentrate -- Preparation of dry films | 90.93 | ISO/TC 45/SC 3 |
| ISO 506:1992 Rubber latex, natural, concentrate -- Determination of volatile fatty acid number | 90.20 | ISO/TC 45/SC 3 |
| ISO 705:1994 Rubber latex -- Determination of density between 5 degrees C and 40 degrees C | 90.93 | ISO/TC 45/SC 3 |
| ISO 706:2004 Rubber latex -- Determination of coagulum content (sieve residue) | 90.93 | ISO/TC 45/SC 3 |
| ISO 976:1996 Rubber and plastics -- Polymer dispersions and rubber latices -- Determination of pH | 90.92 | ISO/TC 45/SC 3 |
| ISO 976:1996/Amd 1:2006 Precision data | 60.60 | ISO/TC 45/SC 3 |
| ISO 1147:1995 Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test | 90.93 | ISO/TC 61/SC 9 |
| ISO 1409:2006 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of surface tension by the ring method | 90.93 | ISO/TC 45/SC 2 |
| ISO 1629:1995 Rubber and latices -- Nomenclature | 90.92 | ISO/TC 45 |
| ISO 1629:1995/Amd 1:2007 | 60.60 | ISO/TC 45 |
| ISO 1629:1995/Amd 1:2007/Cor 1:2009 | 60.60 | ISO/TC 45 |
| ISO 1652:2011 Rubber latex -- Determination of apparent viscosity by the Brookfield test method | 60.60 | ISO/TC 45/SC 3 |
| ISO 1656:1996 Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content | 90.92 | ISO/TC 45/SC 2 |
| ISO 1657:1986 Rubber, raw and rubber latex -- Determination of iron content -- 1,10-Phenanthroline photometric method | 90.93 | ISO/TC 45/SC 2 |
| ISO 1795:2007 Rubber, raw natural and raw synthetic -- Sampling and further preparative procedures | 90.93 | ISO/TC 45/SC 3 |
| ISO 1802:1992 Natural rubber latex concentrate -- Determination of boric acid content | 90.93 | ISO/TC 45/SC 3 |
| ISO 2000:2003 Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR) | 90.92 | ISO/TC 45/SC 3 |
| ISO 2004:2010 Natural rubber latex concentrate -- Centrifuged or creamed, ammonia-preserved types -- Specifications | 60.60 | ISO/TC 45/SC 3 |
| ISO 2005:1992 Rubber latex, natural, concentrate -- Determination of sludge content | 90.92 | ISO/TC 45/SC 3 |
| ISO 2005:1992/Amd 1:2006 Precision data | 60.60 | ISO/TC 45/SC 3 |
| ISO 2006-1:2009 Rubber latex, synthetic -- Determination of mechanical stability -- Part 1: High-speed method | 60.60 | ISO/TC 45/SC 3 |
| ISO 2006-2:2009 Rubber latex, synthetic -- Determination of mechanical stability -- Part 2: Moderate-speed method under load | 60.60 | ISO/TC 45/SC 3 |
| ISO 2027:1990 Natural rubber latex concentrate, evaporated, preserved -- Specification | 90.93 | ISO/TC 45/SC 3 |
| ISO 2028:1999 Synthetic rubber latex -- Preparation of dry polymer | 90.93 | ISO/TC 45/SC 3 |
| ISO 2115:1996 Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature | 90.93 | ISO/TC 61/SC 9 |
| ISO 2453:1991 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method | 90.93 | ISO/TC 45/SC 2 |
| ISO 2453:1991/Cor 1:2003 | 60.60 | ISO/TC 45/SC 2 |
| ISO 2930:2009 Rubber, raw natural -- Determination of plasticity retention index (PRI) | 60.60 | ISO/TC 45/SC 3 |
| ISO 3136:1983 Rubber latex -- Styrene-butadiene -- Determination of bound styrene content | 90.93 | ISO/TC 45/SC 2 |
| ISO 3899:2005 Rubber -- Nitrile latex -- Determination of residual acrylonitrile content | 90.20 | ISO/TC 45/SC 2 |
| ISO 3900:1995 Rubber -- Nitrile latex -- Determination of bound acrylonitrile content | 90.93 | ISO/TC 45/SC 2 |
| ISO 4655:1985 Rubber -- Reinforced styrene-butadiene latex -- Determination of total bound styrene content | 90.93 | ISO/TC 45/SC 2 |
| ISO 4660:2011 Rubber, raw natural -- Colour index test | 60.60 | ISO/TC 45/SC 3 |
| ISO 6225-1:2006 Rubber, raw, natural -- Determination of castor oil content -- Part 1: Determination of castor oil glyceride content by thin-layer chromatography | 90.93 | ISO/TC 45/SC 2 |
| ISO 6225-2:1990 Rubber, raw, natural -- Determination of castor oil content -- Part 2: Determination of total ricinoleic acid content by gas chromatography | 90.93 | ISO/TC 45/SC 2 |
| ISO 6235:1995 Rubber, raw -- Determination of block polystyrene content -- Ozonolysis method | 90.93 | ISO/TC 45/SC 2 |
| ISO 7323:2006 Rubber, raw and unvulcanized compounded -- Determination of plasticity number and recovery number -- Parallel-plate method | 90.93 | ISO/TC 45/SC 2 |
| ISO 7664:2000 Rubber, raw natural and raw synthetic -- General guidance on storage | 90.93 | ISO/TC 45/SC 3 |
| ISO 7780:1998 Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods | 90.93 | ISO/TC 45/SC 2 |
| ISO 7781:2008 Styrene-butadiene rubber, raw -- Determination of soap and organic-acid content | 90.93 | ISO/TC 45/SC 2 |
| ISO 8053:1995 Rubber and latex -- Determination of copper content -- Photometric method | 90.93 | ISO/TC 45/SC 2 |
| ISO 9026:2007 Raw rubber or unvulcanized compounds -- Determination of green strength | 90.93 | ISO/TC 45/SC 2 |
| ISO 9252:1989 Synthetic rubber latex -- Microbiological examination | 90.93 | ISO/TC 45/SC 3 |
| ISO 10638:2010 Rubber -- Identification of antidegradants by gas chromatography/mass spectrometry | 60.60 | ISO/TC 45/SC 2 |
| ISO 11089:2010 Rubber, raw synthetic -- Determination of antidegradants by high-performance liquid chromatography | 60.60 | ISO/TC 45/SC 2 |
| ISO 11344:2004 Rubber, raw synthetic -- Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography | 90.92 | ISO/TC 45/SC 2 |
| ISO 11344:2004/Cor 1:2008 | 60.60 | ISO/TC 45/SC 2 |
| ISO 11852:2011 Rubber -- Determination of magnesium content of field and concentrated natural rubber latex by titration | 60.60 | ISO/TC 45/SC 3 |
| ISO 12000:2000 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods | 90.92 | ISO/TC 61/SC 9 |
| ISO 12243:2003 Medical gloves made from natural rubber latex -- Determination of water-extractable protein using the modified Lowry method | 90.20 | ISO/TC 45/SC 3 |
| ISO 12243:2003/Amd 1:2012 | 60.60 | ISO/TC 45/SC 3 |
| ISO 12492:2012 Rubber, raw -- Determination of water content by Karl Fischer method | 60.60 | ISO/TC 45/SC 2 |
| ISO 13741-1:1998 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 1: Direct liquid injection method | 90.20 | ISO/TC 61/SC 9 |
| ISO 13741-2:1998 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 2: Headspace method | 90.20 | ISO/TC 61/SC 9 |
| ISO 13773:1997 Rubber -- Polychloroprene latex -- Determination of alkalinity | 90.93 | ISO/TC 45/SC 3 |
| ISO/TR 16314:2010 Rubber -- Measurement of the aromaticity of oil in reclaimed rubbers | 60.60 | ISO/TC 45/SC 3 |
| ISO 16564:2004 Rubber, raw natural -- Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) | 90.93 | ISO/TC 45/SC 2 |
| ISO 16564:2004/Amd 1:2006 | 60.60 | ISO/TC 45/SC 2 |
| ISO 17052:2007 Rubber, raw -- Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography -- Thermal desorption (dynamic headspace) method | 90.93 | ISO/TC 45/SC 2 |
| ISO 21461:2012 Rubber -- Determination of the aromaticity of oil in vulcanized rubber compounds | 60.60 | ISO/TC 45/SC 3 |
| ISO 22768:2006 Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC) | 90.93 | ISO/TC 45/SC 2 |
| ISO 24698-1:2008 Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 1: Combustion (Dumas) method | 90.93 | ISO/TC 45/SC 2 |
| ISO 24698-2:2008 Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 2: Kjeldahl method | 90.93 | ISO/TC 45/SC 2 |
