Home

Standards catalogue

Subscribe to updates

77.040.10: Mechanical testing of metals

Mechanical testing in general, see 19.060
Mechanical testing of welded joints, see 25.160.40

Items to be displayed:

Standard and/or projectStage TC
ISO/CD 148-1
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method
30.99 ISO/TC 164/SC 4
ISO 148-1:2009
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method
90.92 ISO/TC 164/SC 4
ISO 148-2:2008
Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines
90.92 ISO/TC 164/SC 4
ISO/CD 148-2
Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines
30.60 ISO/TC 164/SC 4
ISO/CD 148-3
Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
30.60 ISO/TC 164/SC 4
ISO 148-3:2008
Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
90.92 ISO/TC 164/SC 4
ISO 204:2009
Metallic materials -- Uniaxial creep testing in tension -- Method of test
90.60 ISO/TC 164/SC 1
ISO 376:2011
Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
60.60 ISO/TC 164/SC 1
ISO 377:2013
Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
60.60 ISO/TC 17/SC 20
ISO 946:1975
Grey cast iron -- Beam unnotched impact test
90.93 ISO/TC 25
ISO 1099:2006
Metallic materials -- Fatigue testing -- Axial force-controlled method
90.20 ISO/TC 164/SC 5
ISO 1143:2010
Metallic materials -- Rotating bar bending fatigue testing
60.60 ISO/TC 164/SC 5
ISO 1352:2011
Metallic materials -- Torque-controlled fatigue testing
60.60 ISO/TC 164/SC 5
ISO 2566-1:1984
Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels
90.93 ISO/TC 17/SC 20
ISO 2566-2:1984
Steel -- Conversion of elongation values -- Part 2: Austenitic steels
90.93 ISO/TC 17/SC 20
ISO 2739:2012
Sintered metal bushings -- Determination of radial crushing strength
60.60 ISO/TC 119/SC 3
ISO 2740:2009
Sintered metal materials, excluding hardmetals -- Tensile test pieces
90.93 ISO/TC 119/SC 3
ISO 3312:1987
Sintered metal materials and hardmetals -- Determination of Young modulus
90.93 ISO/TC 119/SC 3
ISO 3325:1996
Sintered metal materials, excluding hardmetals -- Determination of transverse rupture strength
90.93 ISO/TC 119/SC 3
ISO 3325:1996/Amd 1:2001
Precision statement
60.60 ISO/TC 119/SC 3
ISO 3327:2009
Hardmetals -- Determination of transverse rupture strength
90.93 ISO/TC 119/SC 4
ISO 3738-1:1982
Hardmetals -- Rockwell hardness test (scale A) -- Part 1: Test method
90.60 ISO/TC 119/SC 4
ISO 3738-2:1988
Hardmetals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks
90.60 ISO/TC 119/SC 4
ISO 3785:2006
Metallic materials -- Designation of test specimen axes in relation to product texture
90.20 ISO/TC 164/SC 4
ISO 3878:1983
Hardmetals -- Vickers hardness test
90.92 ISO/TC 119/SC 4
ISO/CD 3878
Hardmetals -- Vickers hardness test
30.99 ISO/TC 119/SC 4
ISO 3928:1999
Sintered metal materials, excluding hardmetals -- Fatigue test pieces
90.92 ISO/TC 119/SC 3
ISO/NP 3928
Sintered metal materials, excluding hardmetals -- Fatigue test pieces
10.99 ISO/TC 119/SC 3
ISO 3995:1985
Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts
90.93 ISO/TC 119/SC 2
ISO 4498:2010
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness
60.60 ISO/TC 119/SC 3
ISO 4506:1979
Hardmetals -- Compression test
90.93 ISO/TC 119/SC 4
ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of case-hardening depth by a micro-hardness test
90.93 ISO/TC 119/SC 3
ISO 4545-1:2005
Metallic materials -- Knoop hardness test -- Part 1: Test method
90.92 ISO/TC 164/SC 3
ISO/CD 4545-1
Metallic materials -- Knoop hardness test -- Part 1: Test method
30.99 ISO/TC 164/SC 3
ISO 4545-2:2005
Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
ISO/CD 4545-2
Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines
30.99 ISO/TC 164/SC 3
ISO 4545-3:2005
Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks
90.92 ISO/TC 164/SC 3
ISO/CD 4545-3
Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks
30.99 ISO/TC 164/SC 3
ISO/CD 4545-4
Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values
30.99 ISO/TC 164/SC 3
ISO 4545-4:2005
Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values
90.92 ISO/TC 164/SC 3
ISO 4739:1985
Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing
90.93 ISO/TC 26
ISO 4965-1:2012
Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 1: Testing systems
60.60 ISO/TC 164/SC 5
ISO 4965-2:2012
Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 2: Dynamic calibration device (DCD) instrumentation
60.60 ISO/TC 164/SC 5
ISO 5754:1978
Sintered metal materials, excluding hardmetals -- Unnotched impact test piece
90.93 ISO/TC 119/SC 3
ISO 6506-1:2005
Metallic materials -- Brinell hardness test -- Part 1: Test method
90.92 ISO/TC 164/SC 3
ISO 6506-1
Metallic materials -- Brinell hardness test -- Part 1: Test method
60.00 ISO/TC 164/SC 3
ISO 6506-2:2005
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
ISO 6506-2
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines
60.00 ISO/TC 164/SC 3
ISO 6506-3:2005
Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks
90.92 ISO/TC 164/SC 3
ISO 6506-3
Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks
60.00 ISO/TC 164/SC 3
ISO 6506-4
Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values
60.00 ISO/TC 164/SC 3
ISO 6506-4:2005
Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values
90.92 ISO/TC 164/SC 3
ISO 6507-1:2005
Metallic materials -- Vickers hardness test -- Part 1: Test method
90.92 ISO/TC 164/SC 3
ISO/CD 6507-1
Metallic materials -- Vickers hardness test -- Part 1: Test method
30.60 ISO/TC 164/SC 3
ISO/CD 6507-2
Metallic materials -- Vickers hardness test -- Part 2: Verification and calibration of testing machines
30.60 ISO/TC 164/SC 3
ISO 6507-2:2005
Metallic materials -- Vickers hardness test -- Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
ISO 6507-3:2005
Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks
90.92 ISO/TC 164/SC 3
ISO/CD 6507-3
Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks
30.60 ISO/TC 164/SC 3
ISO/CD 6507-4
Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values
30.99 ISO/TC 164/SC 3
ISO 6507-4:2005
Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values
90.92 ISO/TC 164/SC 3
ISO 6508-1:2005
Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
90.92 ISO/TC 164/SC 3
ISO/FDIS 6508-1
Metallic materials -- Rockwell hardness test -- Part 1: Test method
50.20 ISO/TC 164/SC 3
ISO/FDIS 6508-2
Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines and indenters
50.00 ISO/TC 164/SC 3
ISO 6508-2:2005
Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
90.92 ISO/TC 164/SC 3
ISO/FDIS 6508-3
Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks
50.00 ISO/TC 164/SC 3
ISO 6508-3:2005
Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
90.92 ISO/TC 164/SC 3
ISO/DIS 6892-1
Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature
40.20 ISO/TC 164/SC 1
ISO 6892-1:2009
Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature
90.92 ISO/TC 164/SC 1
ISO 6892-2:2011
Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature
60.60 ISO/TC 164/SC 1
ISO/FDIS 6892-3
Metallic materials -- Tensile testing -- Part 3: Method of test at low temperature
50.00 ISO/TC 164/SC 1
ISO/DIS 6892-4
Metallic materials -- Tensile testing -- Part 4: Method of test in liquid helium
40.20 ISO/TC 164/SC 1
ISO 7438:2005
Metallic materials -- Bend test
90.60 ISO/TC 164/SC 2
ISO/DIS 7500-1.2
Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system
40.60 ISO/TC 164/SC 1
ISO 7500-1:2004
Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system
90.92 ISO/TC 164/SC 1
ISO 7500-1:2004/Cor 1:2008
60.60 ISO/TC 164/SC 1
ISO 7500-2:2006
Metallic materials -- Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied force
90.93 ISO/TC 164/SC 1
ISO 7799:1985
Metallic materials -- Sheet and strip 3 mm thick or less -- Reverse bend test
90.93 ISO/TC 164/SC 2
ISO 7800:2012
Metallic materials -- Wire -- Simple torsion test
60.60 ISO/TC 164/SC 2
ISO 7801:1984
Metallic materials -- Wire -- Reverse bend test
90.93 ISO/TC 164/SC 2
ISO 7802:2013
Metallic materials -- Wire -- Wrapping test
60.60 ISO/TC 164/SC 2
ISO 8491:1998
Metallic materials -- Tube (in full section) -- Bend test
90.93 ISO/TC 164/SC 2
ISO 8492:2013
Metallic materials -- Tube -- Flattening test
60.60 ISO/TC 164/SC 2
ISO 8493:1998
Metallic materials -- Tube -- Drift-expanding test
90.93 ISO/TC 164/SC 2
ISO 8494:2013
Metallic materials -- Tube -- Flanging test
60.60 ISO/TC 164/SC 2
ISO 8495:2013
Metallic materials -- Tube -- Ring-expanding test
60.60 ISO/TC 164/SC 2
ISO 8496:2013
Metallic materials -- Tube -- Ring tensile test
60.60 ISO/TC 164/SC 2
ISO 9513:2012
Metallic materials -- Calibration of extensometer systems used in uniaxial testing
60.60 ISO/TC 164/SC 1
ISO 9513:2012/Cor 1:2013
60.60 ISO/TC 164/SC 1
ISO 9649:1990
Metallic materials -- Wire -- Reverse torsion test
90.92 ISO/TC 164/SC 2
ISO/NP TS 10108
Steel -- Conversion of hardness values to tensile strength values
10.99 ISO/TC 17/SC 20
ISO 10113:2006
Metallic materials -- Sheet and strip -- Determination of plastic strain ratio
90.60 ISO/TC 164/SC 2
ISO 10275:2007
Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent
90.60 ISO/TC 164/SC 2
ISO/DIS 11531
Metallic materials -- Earing test
40.99 ISO/TC 164/SC 2
ISO 11531:1994
Metallic materials -- Earing test
90.92 ISO/TC 164/SC 2
ISO 12004-1:2008
Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 1: Measurement and application of forming-limit diagrams in the press shop
90.93 ISO/TC 164/SC 2
ISO 12004-2:2008
Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 2: Determination of forming-limit curves in the laboratory
90.93 ISO/TC 164/SC 2
ISO/NP TR 12105
Metallic materials -- Fatigue testing -- General principles
10.99 ISO/TC 164/SC 5
ISO 12106:2003
Metallic materials -- Fatigue testing -- Axial-strain-controlled method
90.92 ISO/TC 164/SC 5
ISO/NP 12106
Metallic materials -- Fatigue testing -- Axial-strain-controlled method
10.99 ISO/TC 164/SC 5
ISO 12107:2012
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data
60.60 ISO/TC 164/SC 5
ISO 12108:2012
Metallic materials -- Fatigue testing -- Fatigue crack growth method
60.60 ISO/TC 164/SC 5
ISO 12110-1:2013
Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 1: General principles, test method and reporting requirements
60.60 ISO/TC 164/SC 5
ISO 12110-2:2013
Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 2: Cycle counting and related data reduction methods
60.60 ISO/TC 164/SC 5
ISO 12111:2011
Metallic materials -- Fatigue testing -- Strain-controlled thermomechanical fatigue testing method
60.60 ISO/TC 164/SC 5
ISO/CD 12135
Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness
30.60 ISO/TC 164/SC 4
ISO 12135:2002
Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness
90.92 ISO/TC 164/SC 4
ISO 12135:2002/Cor 1:2008
60.60 ISO/TC 164/SC 4
ISO 13314:2011
Mechanical testing of metals -- Ductility testing -- Compression test for porous and cellular metals
60.60 ISO/TC 164/SC 2
ISO 14317:2006
Sintered metal materials excluding hardmetals -- Determination of compressive yield strength
90.92 ISO/TC 119/SC 3
ISO/FDIS 14317
Sintered metal materials excluding hardmetals -- Determination of compressive yield strength
50.00 ISO/TC 119/SC 3
ISO/DIS 14556
Metallic materials -- Charpy V-notch pendulum impact test -- Instrumented test method
40.20 ISO/TC 164/SC 4
ISO 14556:2000
Steel -- Charpy V-notch pendulum impact test -- Instrumented test method
90.92 ISO/TC 164/SC 4
ISO 14556:2000/Amd 1:2006
Annex D -- Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
60.60 ISO/TC 164/SC 4
ISO 14577-1:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method
90.92 ISO/TC 164/SC 3
ISO/DIS 14577-1
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method
40.99 ISO/TC 164/SC 3
ISO 14577-2:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
ISO/DIS 14577-2
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines
40.99 ISO/TC 164/SC 3
ISO/DIS 14577-3
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
40.99 ISO/TC 164/SC 3
ISO 14577-3:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
90.92 ISO/TC 164/SC 3
ISO/CD 14577-4
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings
30.20 ISO/TC 164/SC 3
ISO 14577-4:2007
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings
90.92 ISO/TC 164/SC 3
ISO 15363:2000
Metallic materials -- Tube ring hydraulic pressure test
90.93 ISO/TC 164/SC 2
ISO 15579:2000
Metallic materials -- Tensile testing at low temperature
90.92 ISO/TC 164/SC 1
ISO 16630:2009
Metallic materials -- Sheet and strip -- Hole expanding test
90.20 ISO/TC 164/SC 2
ISO 16808:2014
Metallic materials -- Sheet and strip -- Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
60.60 ISO/TC 164/SC 2
ISO 16842
Metallic materials -- Sheet and strip -- Biaxial tensile testing method using a cruciform test piece
60.00 ISO/TC 164/SC 2
ISO/DIS 16859-1
Metallic materials -- Leeb hardness test -- Part 1: Test method
40.60 ISO/TC 164/SC 3
ISO/DIS 16859-2
Metallic materials -- Leeb hardness test -- Part 2: Verification and calibration of the testing devices
40.60 ISO/TC 164/SC 3
ISO/DIS 16859-3
Metallic materials -- Leeb hardness test -- Part 3: Calibration of reference test blocks
40.60 ISO/TC 164/SC 3
ISO 17340:2014
Metallic materials -- Ductility testing -- High speed compression test for porous and cellular metals
60.60 ISO/TC 164/SC 2
ISO 18265:2013
Metallic materials -- Conversion of hardness values
60.60 ISO/TC 164/SC 3
ISO/DIS 18338
Metallic materials -- Torsion test at ambient temperature
40.60 ISO/TC 164/SC 2
ISO 19819:2004
Metallic materials -- Tensile testing in liquid helium
90.92 ISO/TC 164/SC 1
ISO 20032:2013
Method for evaluation of tensile properties of metallic superplastic materials
60.60 ISO/TC 164/SC 2
ISO 20482:2013
Metallic materials -- Sheet and strip -- Erichsen cupping test
60.60 ISO/TC 164/SC 2
ISO 22394:2010
Hardmetals -- Knoop hardness test
60.60 ISO/TC 119/SC 4
ISO 22889:2013
Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint
60.60 ISO/TC 164/SC 4
ISO 23718:2007
Metallic materials -- Mechanical testing -- Vocabulary
90.93 ISO/TC 164
ISO 23788:2012
Metallic materials -- Verification of the alignment of fatigue testing machines
60.60 ISO/TC 164/SC 5
ISO 24213:2008
Metallic materials -- Sheet and strip -- Method for springback evaluation in stretch bending
90.93 ISO/TC 164/SC 2
ISO/TR 25679:2005
Mechanical testing of metals -- Symbols and definitions in published standards
90.93 ISO/TC 164
ISO 26203-1:2010
Metallic materials -- Tensile testing at high strain rates -- Part 1: Elastic-bar-type systems
60.60 ISO/TC 164/SC 1
ISO 26203-2:2011
Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems
60.60 ISO/TC 164/SC 1
ISO 27306:2009
Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
90.60 ISO/TC 164/SC 4
ISO 28079:2009
Hardmetals -- Palmqvist toughness test
90.20 ISO/TC 119/SC 4
ISO 28080:2011
Hardmetals -- Abrasion tests for hardmetals
60.60 ISO/TC 119/SC 4
ISO/TR 29381:2008
Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties
90.93 ISO/TC 164/SC 3