Home

Standards catalogue

Subscribe to updates

75.100: Lubricants, industrial oils and related products

Including mineral oils, fluids for metal working and for temporary protection against corrosion
Insulating oils, see 29.040.10
Lubrication systems, see 21.260

Items to be displayed:

Standard and/or projectStage TC
ISO 2137:2007
Petroleum products and lubricants -- Determination of cone penetration of lubricating greases and petrolatum
90.93 ISO/TC 28
ISO 2176:1995
Petroleum products -- Lubricating grease -- Determination of dropping point
90.93 ISO/TC 28
ISO 2176:1995/Cor 1:2001
60.60 ISO/TC 28
ISO 3448:1992
Industrial liquid lubricants -- ISO viscosity classification
90.93 ISO/TC 28
ISO 3448:1992/Cor 1:1993
60.60 ISO/TC 28
ISO 3987:2010
Petroleum products -- Determination of sulfated ash in lubricating oils and additives
60.60 ISO/TC 28
ISO 3987:2010/Cor 1:2011
60.60 ISO/TC 28
ISO 4263-1:2003
Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids -- TOST test -- Part 1: Procedure for mineral oils
90.60 ISO/TC 28
ISO 4263-4:2006
Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids -- TOST test -- Part 4: Procedure for industrial gear oils
90.60 ISO/TC 28
ISO 6247:1998
Petroleum products -- Determination of foaming characteristics of lubricating oils
90.60 ISO/TC 28
ISO 6247:1998/Cor 1:1999
60.60 ISO/TC 28
ISO 6299:1998
Petroleum products -- Determination of dropping point of lubricating greases (wide temperature range)
90.60 ISO/TC 28
ISO 6617:1994
Petroleum-based lubricating oils -- Aging characteristics -- Determination of change in Conradson carbon residue after oxidation
90.93 ISO/TC 28
ISO 6743-1:2002
Lubricants, industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems)
90.93 ISO/TC 28/SC 4
ISO 6743-2:1981
Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family F (Spindle bearings, bearings and associated clutches)
90.20 ISO/TC 28/SC 4
ISO 6743-3:2003
Lubricants, industrial oils and related products (class L) -- Classification -- Part 3: Family D (Compressors)
90.93 ISO/TC 28/SC 4
ISO 6743-5:2006
Lubricants, industrial oils and related products (class L) -- Classification -- Part 5: Family T (Turbines)
90.20 ISO/TC 28/SC 4
ISO 6743-6:1990
Lubricants, industrial oils and related products (class L) -- Classification -- Part 6: Family C (Gears)
90.93 ISO/TC 28/SC 4
ISO 6743-7:1986
Lubricants, industrial oils and related products (class L) -- Classification -- Part 7: Family M (Metalworking)
90.20 ISO/TC 28/SC 4
ISO 6743-8:1987
Lubricants, industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion)
90.20 ISO/TC 28/SC 4
ISO 6743-9:2003
Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases)
90.93 ISO/TC 28/SC 4
ISO 6743-10:1989
Lubricants, industrial oils and related products (class L) -- Classification -- Part 10: Family Y (Miscellaneous)
90.93 ISO/TC 28/SC 4
ISO 6743-11:1990
Lubricants, industrial oils and related products (class L) -- Classification -- Part 11: Family P (Pneumatic tools)
90.93 ISO/TC 28/SC 4
ISO 6743-12:1989
Lubricants, industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids)
90.93 ISO/TC 28/SC 4
ISO 6743-13:2002
Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways)
90.93 ISO/TC 28/SC 4
ISO 6743-14:1994
Lubricants, industrial oils and related products (class L) -- Classification -- Part 14: Family U (Heat treatment)
90.93 ISO/TC 28/SC 4
ISO 6743-15:2007
Lubricants, industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils)
90.93 ISO/TC 28/SC 4
ISO 6743-99:2002
Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General
90.93 ISO/TC 28/SC 4
ISO 8068:2006
Lubricants, industrial oils and related products (class L) -- Family T (Turbines) -- Specification for lubricating oils for turbines
90.20 ISO/TC 28/SC 4
ISO 9120:1997
Petroleum and related products -- Determination of air-release properties of steam turbine and other oils -- Impinger method
90.93 ISO/TC 28
ISO 9950:1995
Industrial quenching oils -- Determination of cooling characteristics -- Nickel-alloy probe test method
90.93 ISO/TC 28
ISO 10416:2008
Petroleum and natural gas industries -- Drilling fluids -- Laboratory testing
90.93 ISO/TC 67/SC 3
ISO 11007:1997
Petroleum products and lubricants -- Determination of rust-prevention characteristics of lubricating greases
90.93 ISO/TC 28
ISO 11009:2000
Petroleum products and lubricants -- Determination of water washout characteristics of lubricating greases
90.93 ISO/TC 28
ISO/TS 11366:2011
Petroleum and related products -- Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines
90.93 ISO/TC 28/SC 4
ISO 12152:2012
Lubricants, industrial oils and related products -- Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig -- Flender foam test procedure
60.60 ISO/TC 28
ISO 12924:2010
Lubricants, industrial oils and related products (Class L) -- Family X (Greases) -- Specification
60.60 ISO/TC 28/SC 4
ISO 12924:2010/Cor 1:2012
60.60 ISO/TC 28/SC 4
ISO 12925-1:1996
Lubricants, industrial oils and related products (class L) -- Family C (Gears) -- Part 1: Specifications for lubricants for enclosed gear systems
90.93 ISO/TC 28/SC 4
ISO 12925-1:1996/Cor 1:2002
60.60 ISO/TC 28/SC 4
ISO/TS 12927:1999
Lubricants, industrial oils and related products (class L) -- Family M (Metalworking) -- Guidelines for establishing specifications
90.93 ISO/TC 28/SC 4
ISO/TS 12928:1999
Lubricants, industrial oils and related products (class L) -- Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
90.93 ISO/TC 28/SC 4
ISO 13357-1:2002
Petroleum products -- Determination of the filterability of lubricating oils -- Part 1: Procedure for oils in the presence of water
90.92 ISO/TC 28
ISO/AWI 13357-1
Petroleum products -- Determination of the filterability of lubricating oils -- Part 1: Procedure for oils in the presence of water
20.00 ISO/TC 28
ISO/WD 13357-2
Petroleum products -- Determination of the filterability of lubricating oils -- Part 2: Procedure for dry oils
20.20 ISO/TC 28
ISO 13357-2:2005
Petroleum products -- Determination of the filterability of lubricating oils -- Part 2: Procedure for dry oils
90.92 ISO/TC 28
ISO 13503-1:2011
Petroleum and natural gas industries -- Completion fluids and materials -- Part 1: Measurement of viscous properties of completion fluids
60.60 ISO/TC 67/SC 3
ISO 13503-2:2006
Petroleum and natural gas industries -- Completion fluids and materials -- Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
90.93 ISO/TC 67/SC 3
ISO 13503-2:2006/Amd 1:2009
Addition of Annex B: Proppand specification
60.60 ISO/TC 67/SC 3
ISO 13503-3:2005
Petroleum and natural gas industries -- Completion fluids and materials -- Part 3: Testing of heavy brines
90.92 ISO/TC 67/SC 3
ISO/CD 13503-3
Petroleum and natural gas industries -- Completion fluids and materials -- Part 3: Testing of heavy brines
30.60 ISO/TC 67/SC 3
ISO 13503-3:2005/Cor 1:2006
60.60 ISO/TC 67/SC 3
ISO 13503-4:2006
Petroleum and natural gas industries -- Completion fluids and materials -- Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
90.93 ISO/TC 67/SC 3
ISO 13503-5:2006
Petroleum and natural gas industries -- Completion fluids and materials -- Part 5: Procedures for measuring the long-term conductivity of proppants
90.60 ISO/TC 67/SC 3
ISO 13503-6:2014
Petroleum and natural gas industries -- Completion fluids and materials -- Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions
60.60 ISO/TC 67/SC 3
ISO 13737:2004
Petroleum products and lubricants -- Determination of low-temperature cone penetration of lubricating greases
90.60 ISO/TC 28
ISO 13738:2011
Lubricants, industrial oils and related products (class L) -- Family E (Internal combustion engine oils) -- Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
60.60 ISO/TC 28/SC 4
ISO 15380:2011
Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HETG, HEPG, HEES and HEPR
90.92 ISO/TC 28/SC 4
ISO/CD 15380
Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HETG, HEPG, HEES and HEPR
30.00 ISO/TC 28/SC 4
ISO 19378:2003
Lubricants, industrial oils and related products (class L) -- Machine-tool lubricants -- Categories and specifications
90.93 ISO/TC 28/SC 4
ISO 20623:2003
Petroleum and related products -- Determination of the extreme-pressure and anti-wear properties of fluids -- Four ball method (European conditions)
90.93 ISO/TC 28
ISO 24254:2007
Lubricants, industrial oils and related products (class L) -- Family E (internal combustion engine oils) -- Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)
90.93 ISO/TC 28/SC 4
ISO 26422:2014
Petroleum and related products -- Determination of shear stability of lubricating oils containing polymers -- Method using a tapered roller bearing
60.60 ISO/TC 28