Home

Standards catalogue

Subscribe to updates

25.220.10: Surface preparation

Including surface preparation for painting, cleaning, scouring, blasting, etc.

Items to be displayed:

Standard and/or projectStage TC
ISO 3861:2005
Rubber hoses for sand and grit blasting -- Specification
90.93 ISO/TC 45/SC 1
ISO 8501-1:2007
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
90.93 ISO/TC 35/SC 12
ISO 8501-2:1994
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
90.93 ISO/TC 35/SC 12
ISO 8501-3:2006
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds, edges and other areas with surface imperfections
90.60 ISO/TC 35/SC 12
ISO 8501-4:2006
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
90.93 ISO/TC 35/SC 12
ISO 8502-2:2005
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces
90.92 ISO/TC 35/SC 12
ISO 8502-3:1992
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
90.92 ISO/TC 35/SC 12
ISO 8502-4:1993
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 4: Guidance on the estimation of the probability of condensation prior to paint application
90.92 ISO/TC 35/SC 12
ISO 8502-5:1998
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
90.93 ISO/TC 35/SC 12
ISO 8502-6:2006
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method
90.93 ISO/TC 35/SC 12
ISO 8502-9:1998
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts
90.92 ISO/TC 35/SC 12
ISO 8502-11:2006
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 11: Field method for the turbidimetric determination of water-soluble sulfate
90.93 ISO/TC 35/SC 12
ISO 8502-12:2003
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
90.92 ISO/TC 35/SC 12
ISO 8503-1:2012
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
60.60 ISO/TC 35/SC 12
ISO 8503-2:2012
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure
60.60 ISO/TC 35/SC 12
ISO 8503-3:2012
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Focusing microscope procedure
60.60 ISO/TC 35/SC 12
ISO 8503-4:2012
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Stylus instrument procedure
60.60 ISO/TC 35/SC 12
ISO 8503-5:2003
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 5: Replica tape method for the determination of the surface profile
90.92 ISO/TC 35/SC 12
ISO 8504-1:2000
Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles
90.93 ISO/TC 35/SC 12
ISO 8504-2:2000
Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning
90.93 ISO/TC 35/SC 12
ISO 8504-3:1993
Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 3: Hand- and power-tool cleaning
90.92 ISO/TC 35/SC 12
ISO 11124-1:1993
Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification
90.92 ISO/TC 35/SC 12
ISO 11124-2:1993
Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit
90.92 ISO/TC 35/SC 12
ISO 11124-3:1993
Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit
90.92 ISO/TC 35/SC 12
ISO 11124-4:1993
Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot
90.92 ISO/TC 35/SC 12
ISO 11125-1:1993
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling
90.92 ISO/TC 35/SC 12
ISO 11125-2:1993
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution
90.92 ISO/TC 35/SC 12
ISO 11125-3:1993
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness
90.92 ISO/TC 35/SC 12
ISO 11125-4:1993
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density
90.92 ISO/TC 35/SC 12
ISO 11125-5:1993
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure
90.92 ISO/TC 35/SC 12
ISO 11125-6:1993
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter
90.92 ISO/TC 35/SC 12
ISO 11125-7:1993
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture
90.92 ISO/TC 35/SC 12
ISO 11126-1:1993
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification
90.92 ISO/TC 35/SC 12
ISO 11126-1:1993/Cor 1:1997
60.60 ISO/TC 35/SC 12
ISO 11126-1:1993/Cor 2:1997
60.60 ISO/TC 35/SC 12
ISO 11126-3:1993
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag
90.92 ISO/TC 35/SC 12
ISO 11126-4:1993
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag
90.92 ISO/TC 35/SC 12
ISO 11126-5:1993
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag
90.92 ISO/TC 35/SC 12
ISO 11126-6:1993
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag
90.92 ISO/TC 35/SC 12
ISO 11126-7:1995
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide
90.92 ISO/TC 35/SC 12
ISO 11126-7:1995/Cor 1:1999
60.60 ISO/TC 35/SC 12
ISO 11126-8:1993
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand
90.92 ISO/TC 35/SC 12
ISO 11126-9:1999
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite
90.60 ISO/TC 35/SC 12
ISO 11126-10:2000
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet
90.92 ISO/TC 35/SC 12
ISO 11127-1:2011
Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling
60.60 ISO/TC 35/SC 12
ISO 11127-2:2011
Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution
60.60 ISO/TC 35/SC 12
ISO 11127-3:2011
Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density
60.60 ISO/TC 35/SC 12
ISO 11127-4:2011
Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide test
60.60 ISO/TC 35/SC 12
ISO 11127-5:2011
Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture
60.60 ISO/TC 35/SC 12
ISO 11127-6:2011
Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement
60.60 ISO/TC 35/SC 12
ISO 11127-7:2011
Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides
60.60 ISO/TC 35/SC 12
ISO 12944-4:1998
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation
90.92 ISO/TC 35/SC 14
ISO/TR 15235:2001
Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination
90.92 ISO/TC 35/SC 12