Including thermal cutting equipment
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 669:2000 Resistance welding -- Resistance welding equipment -- Mechanical and electrical requirements | 90.92 | ISO/TC 44/SC 6 |
| ISO/DIS 669 Resistance welding -- Resistance welding equipment -- Mechanical and electrical requirements | 40.20 | ISO/TC 44/SC 6 |
| ISO 693:1982 Dimensions of seam welding wheel blanks | 90.93 | ISO/TC 44/SC 6 |
| ISO 865:1981 Slots in platens for projection welding machines | 90.93 | ISO/TC 44/SC 6 |
| ISO 1089:1980 Electrode taper fits for spot welding equipment -- Dimensions | 90.93 | ISO/TC 44/SC 6 |
| ISO 2503:2009 Gas welding equipment -- Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) | 60.60 | ISO/TC 44/SC 8 |
| ISO 3821:2008 Gas welding equipment -- Rubber hoses for welding, cutting and allied processes | 60.60 | ISO/TC 44/SC 8 |
| ISO 5171:2009 Gas welding equipment -- Pressure gauges used in welding, cutting and allied processes | 60.60 | ISO/TC 44/SC 8 |
| ISO 5172:2006 Gas welding equipment -- Blowpipes for gas welding, heating and cutting -- Specifications and tests | 90.93 | ISO/TC 44/SC 8 |
| ISO 5172:2006/Amd 1:2012 | 60.60 | ISO/TC 44/SC 8 |
| ISO 5175:1987 Equipment used in gas welding, cutting and allied processes -- Safety devices for fuel gases and oxygen or compressed air -- General specifications, requirements and tests | 90.93 | ISO/TC 44/SC 8 |
| ISO 5183-1:1998 Resistance welding equipment -- Electrode adaptors, male taper 1:10 -- Part 1: Conical fixing, taper 1:10 | 90.93 | ISO/TC 44/SC 6 |
| ISO 5183-2:2000 Resistance spot welding -- Electrode adaptors, male taper 1:10 -- Part 2: Parallel shank fixing for end-thrust electrodes | 90.93 | ISO/TC 44/SC 6 |
| ISO 5821:2009 Resistance welding -- Spot welding electrode caps | 60.60 | ISO/TC 44/SC 6 |
| ISO 5822:1988 Spot welding equipment -- Taper plug gauges and taper ring gauges | 90.93 | ISO/TC 44/SC 6 |
| ISO 5826:1999 Resistance welding equipment -- Transformers -- General specifications applicable to all transformers | 90.92 | ISO/TC 44/SC 6 |
| ISO/DIS 5826.2 Resistance welding equipment -- Transformers -- General specifications applicable to all transformers | 40.20 | ISO/TC 44/SC 6 |
| ISO 5827:1983 Spot welding -- Electrode back-ups and clamps | 90.93 | ISO/TC 44/SC 6 |
| ISO 5828:2001 Resistance welding equipment -- Secondary connecting cables with terminals connected to water-cooled lugs -- Dimensions and characteristics | 90.93 | ISO/TC 44/SC 6 |
| ISO 5829:1984 Resistance spot welding -- Electrode adaptors, female taper 1 : 10 | 90.93 | ISO/TC 44/SC 6 |
| ISO 5830:1984 Resistance spot welding -- Male electrode caps | 90.93 | ISO/TC 44/SC 6 |
| ISO 6210-1:1991 Cylinders for robot resistance welding guns -- Part 1: General requirements | 90.93 | ISO/TC 44/SC 6 |
| ISO 7285:1995 Pneumatic cylinders for mechanized multiple spot welding | 90.93 | ISO/TC 44/SC 6 |
| ISO 7286:1986 Graphical symbols for resistance welding equipment | 90.93 | ISO/TC 44/SC 6 |
| ISO 7287:2002 Graphical symbols for thermal cutting equipment | 90.93 | ISO/TC 44/SC 8 |
| ISO 7289:2010 Gas welding equipment -- Quick-action couplings with shut-off valves for welding, cutting and allied processes | 60.60 | ISO/TC 44/SC 8 |
| ISO 7291:2010 Gas welding equipment -- Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) | 60.60 | ISO/TC 44/SC 8 |
| ISO 7931:1985 Insulation caps and bushes for resistance welding equipment | 90.93 | ISO/TC 44/SC 6 |
| ISO 8166:2003 Resistance welding -- Procedure for the evaluation of the life of spot welding electrodes using constant machine settings | 90.92 | ISO/TC 44/SC 6 |
| ISO 8167:1989 Projections for resistance welding | 90.93 | ISO/TC 44/SC 6 |
| ISO 8205-1:2002 Water-cooled secondary connection cables for resistance welding -- Part 1: Dimensions and requirements for double-conductor connection cables | 90.60 | ISO/TC 44/SC 6 |
| ISO 8205-2:2002 Water-cooled secondary connection cables for resistance welding -- Part 2: Dimensions and requirements for single-conductor connection cables | 90.60 | ISO/TC 44/SC 6 |
| ISO 8205-3:2012 Water-cooled secondary connection cables for resistance welding -- Part 3: Test requirements | 60.60 | ISO/TC 44/SC 6 |
| ISO 8206:1991 Acceptance tests for oxygen cutting machines -- Reproducible accuracy -- Operational characteristics | 90.93 | ISO/TC 44/SC 8 |
| ISO 8207:1996 Gas welding equipment -- Specification for hose assemblies for equipment for welding, cutting and allied processes | 90.93 | ISO/TC 44/SC 8 |
| ISO 8430-1:1988 Resistance spot welding -- Electrode holders -- Part 1: Taper fixing 1:10 | 90.93 | ISO/TC 44/SC 6 |
| ISO 8430-2:1988 Resistance spot welding -- Electrode holders -- Part 2: Morse taper fixing | 90.93 | ISO/TC 44/SC 6 |
| ISO 8430-3:1988 Resistance spot welding -- Electrode holders -- Part 3: Parallel shank fixing for end thrust | 90.93 | ISO/TC 44/SC 6 |
| ISO 8430-3:1988/Cor 1:1990 | 90.93 | ISO/TC 44/SC 6 |
| ISO 9012:2008 Gas welding equipment -- Air-aspirated hand blowpipes -- Specifications and tests | 90.20 | ISO/TC 44/SC 8 |
| ISO 9090:1989 Gas tightness of equipment for gas welding and allied processes | 90.93 | ISO/TC 44/SC 8 |
| ISO 9312:1990 Resistance welding equipment -- Insulated pins for use in electrode back-ups | 90.92 | ISO/TC 44/SC 6 |
| ISO/FDIS 9312 Resistance welding equipment -- Insulated pins for use in electrode back-ups | 50.60 | ISO/TC 44/SC 6 |
| ISO 9313:1989 Resistance spot welding equipment -- Cooling tubes | 90.93 | ISO/TC 44/SC 6 |
| ISO 9539:2010 Gas welding equipment -- Materials for equipment used in gas welding, cutting and allied processes | 60.60 | ISO/TC 44/SC 8 |
| ISO 9539:2010/DAmd 1 | 40.60 | ISO/TC 44/SC 8 |
| ISO/NP 10225 Gas welding equipment -- Marking for equipment used for gas welding, cutting and allied processes | 10.99 | ISO/TC 44/SC 8 |
| ISO 10656:1996 Electric resistance welding -- Integrated transformers for welding guns | 90.92 | ISO/TC 44/SC 6 |
| ISO 10656:1996/Cor 1:2000 | 60.60 | ISO/TC 44/SC 6 |
| ISO 12170:1996 Gas welding equipment -- Thermoplastic hoses for welding and allied processes | 90.93 | ISO/TC 44/SC 8 |
| ISO 14112:1996 Gas welding equipment -- Small kits for gas brazing and welding | 90.93 | ISO/TC 44/SC 8 |
| ISO/FDIS 14113 Gas welding equipment -- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) | 50.20 | ISO/TC 44/SC 8 |
| ISO 14113:2007 Gas welding equipment -- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) | 90.92 | ISO/TC 44/SC 8 |
| ISO/DIS 14114 Gas welding equipment -- Acetylene manifold systems for welding, cutting and allied processes -- General requirements | 40.60 | ISO/TC 44/SC 8 |
| ISO 14114:1999 Gas welding equipment -- Acetylene manifold systems for welding, cutting and allied processes -- General requirements | 90.92 | ISO/TC 44/SC 8 |
| ISO 14744-1:2008 Welding -- Acceptance inspection of electron beam welding machines -- Part 1: Principles and acceptance conditions | 90.20 | ISO/TC 44/SC 10 |
| ISO 14744-2:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 2: Measurement of accelerating voltage characteristics | 90.93 | ISO/TC 44/SC 10 |
| ISO 14744-3:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 3: Measurement of beam current characteristics | 90.93 | ISO/TC 44/SC 10 |
| ISO 14744-4:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 4: Measurement of welding speed | 90.93 | ISO/TC 44/SC 10 |
| ISO 14744-5:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 5: Measurement of run-out accuracy | 90.93 | ISO/TC 44/SC 10 |
| ISO 14744-6:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 6: Measurement of stability of spot position | 90.93 | ISO/TC 44/SC 10 |
| ISO 15012-1:2013 Health and safety in welding and allied processes -- Equipment for capture and separation of welding fume -- Part 1: Requirements for testing and marking of separation efficiency | 60.60 | ISO/TC 44/SC 9 |
| ISO 15012-2:2008 Health and safety in welding and allied processes -- Requirements, testing and marking of equipment for air filtration -- Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles | 90.20 | ISO/TC 44/SC 9 |
| ISO/CD 15012-4 Health and safety in welding and allied processes -- Equipment for capture and separation of welding fume -- Part 4: Design requirements | 30.60 | ISO/TC 44/SC 9 |
| ISO 15296:2004 Gas welding equipment -- Vocabulary -- Terms used for gas welding equipment | 90.20 | ISO/TC 44/SC 8 |
| ISO 15615:2013 Gas welding equipment -- Acetylene manifold systems for welding, cutting and allied processes -- Safety requirements in high-pressure devices | 60.60 | ISO/TC 44/SC 8 |
| ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 1: General principles, acceptance conditions | 90.20 | ISO/TC 44/SC 10 |
| ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 2: Measurement of static and dynamic accuracy | 90.20 | ISO/TC 44/SC 10 |
| ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 3: Calibration of instruments for measurement of gas flow and pressure | 90.20 | ISO/TC 44/SC 10 |
| ISO 15616-4:2008 Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 4: Machines with 2-D moving optics | 60.60 | ISO/TC 44/SC 10 |
| ISO 17662:2005 Welding -- Calibration, verification and validation of equipment used for welding, including ancillary activities | 90.93 | ISO/TC 44/SC 10 |
| ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines -- Machines with optical fibre delivery -- Part 1: Laser assembly | 90.93 | ISO/TC 44/SC 10 |
| ISO 22827-2:2005 Acceptance tests for Nd:YAG laser beam welding machines -- Machines with optical fibre delivery -- Part 2: Moving mechanism | 90.93 | ISO/TC 44/SC 10 |
| ISO 22829:2007 Resistance welding -- Transformer-rectifier for welding guns with integrated transformers -- Transformer-rectifier units operating at 1000 Hz frequency | 90.93 | ISO/TC 44/SC 6 |
| ISO/TR 28821:2012 Gas welding equipment -- Hose connections for equipment for welding, cutting and allied processes -- Listing of connections which are either standardised or in common use | 60.60 | ISO/TC 44/SC 8 |
