Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 265-1:1988 Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) | 90.93 | ISO/TC 138/SC 1 |
| ISO 580:2005 Plastics piping and ducting systems -- Injection-moulded thermoplastics fittings -- Methods for visually assessing the effects of heating | 90.20 | ISO/TC 138/SC 5 |
| ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 1: Metric series | 90.93 | ISO/TC 138/SC 2 |
| ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 2: Inch-based series | 90.93 | ISO/TC 138/SC 2 |
| ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method | 90.93 | ISO/TC 138/SC 5 |
| ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces | 90.93 | ISO/TC 138/SC 5 |
| ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components | 90.93 | ISO/TC 138/SC 5 |
| ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies | 90.93 | ISO/TC 138/SC 5 |
| ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 2 |
| ISO 2507-1:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 2507-2:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes | 90.93 | ISO/TC 138/SC 5 |
| ISO 2507-3:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings | 90.93 | ISO/TC 138/SC 5 |
| ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density | 90.93 | ISO/TC 138/SC 5 |
| ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness | 90.93 | ISO/TC 138/SC 2 |
| ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series | 90.93 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General | 90.93 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007/CD Amd 1 | 30.60 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007/Cor 1:2008 | 60.60 | ISO/TC 138/SC 2 |
| ISO 4427-3:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings | 90.93 | ISO/TC 138/SC 2 |
| ISO 4427-5:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system | 90.93 | ISO/TC 138/SC 2 |
| ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density | 90.93 | ISO/TC 138/SC 5 |
| ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials | 90.93 | ISO/TC 138/SC 5 |
| ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials | 90.93 | ISO/TC 138/SC 5 |
| ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals | 90.60 | ISO/TC 138/SC 6 |
| ISO 7510:1997 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method | 90.20 | ISO/TC 138/SC 6 |
| ISO 7511:1999 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure | 90.93 | ISO/TC 138/SC 6 |
| ISO 7686:2005 Plastics pipes and fittings -- Determination of opacity | 90.93 | ISO/TC 138/SC 5 |
| ISO 8283-1:1991 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8283-2:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8283-3:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8283-4:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS) | 90.20 | ISO/TC 138/SC 1 |
| ISO 8361-1:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 8361-2:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings | 90.93 | ISO/TC 138/SC 5 |
| ISO 8361-3:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings | 90.93 | ISO/TC 138/SC 5 |
| ISO 8483:2003 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of bolted flange joints | 90.93 | ISO/TC 138/SC 6 |
| ISO 8483:2003/Amd 1:2012 | 60.60 | ISO/TC 138/SC 6 |
| ISO 8533:2003 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints | 90.93 | ISO/TC 138/SC 6 |
| ISO 8533:2003/Amd 1:2012 | 60.60 | ISO/TC 138/SC 6 |
| ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) | 90.93 | ISO/TC 138/SC 1 |
| ISO 9623:1997 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series | 90.93 | ISO/TC 138/SC 2 |
| ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test | 90.93 | ISO/TC 138/SC 5 |
| ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content | 60.60 | ISO/TC 138/SC 5 |
| ISO/TR 10358:1993 Plastics pipes and fittings -- Combined chemical-resistance classification table | 90.93 | ISO/TC 138/SC 3 |
| ISO 10508:2006 Plastics piping systems for hot and cold water installations -- Guidance for classification and design | 90.93 | ISO/TC 138/SC 2 |
| ISO 10928:2009 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use | 60.60 | ISO/TC 138/SC 6 |
| ISO 10928:2009/Amd 1 | 60.00 | ISO/TC 138/SC 6 |
| ISO/DIS 10952 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | 40.00 | ISO/TC 138/SC 6 |
| ISO 10952:2008 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | 90.92 | ISO/TC 138/SC 6 |
| ISO/DTR 10986 Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 30.99 | ISO/TC 138/SC 6 |
| ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes | 60.60 | ISO/TC 138 |
| ISO 11296-3:2009/Cor 1:2011 | 60.60 | ISO/TC 138 |
| ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes | 60.60 | ISO/TC 138 |
| ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes | 60.60 | ISO/TC 138 |
| ISO 11297-1:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11297-3 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes | 60.00 | ISO/TC 138 |
| ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes | 60.60 | ISO/TC 138 |
| ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks -- Part 3: Lining with close-fit pipes | 60.60 | ISO/TC 138 |
| ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient | 60.60 | ISO/TC 138/SC 5 |
| ISO 12176-1:2012 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion | 60.60 | ISO/TC 138/SC 4 |
| ISO 12176-2:2008 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion | 90.93 | ISO/TC 138/SC 4 |
| ISO 12176-3:2011 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge | 60.60 | ISO/TC 138/SC 4 |
| ISO 12176-4:2003 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding | 90.93 | ISO/TC 138/SC 4 |
| ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading | 60.60 | ISO/TC 138/SC 1 |
| ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam | 60.60 | ISO/TC 138/SC 1 |
| ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength | 60.60 | ISO/TC 138/SC 1 |
| ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings | 60.60 | ISO/TC 138/SC 1 |
| ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure | 60.60 | ISO/TC 138/SC 1 |
| ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading | 60.60 | ISO/TC 138/SC 1 |
| ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test methods for buckling resistance | 60.60 | ISO/TC 138/SC 1 |
| ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness | 60.60 | ISO/TC 138/SC 1 |
| ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations | 60.60 | ISO/TC 138/SC 1 |
| ISO 13761:1996 Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C | 90.92 | ISO/TC 138/SC 5 |
| ISO 13924:2000 Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles | 90.93 | ISO/TC 138/SC 5 |
| ISO 13950:2007 Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints | 90.93 | ISO/TC 138/SC 4 |
| ISO 13950:2007/Cor 1:2008 | 60.60 | ISO/TC 138/SC 4 |
| ISO 13957:1997 Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance | 90.93 | ISO/TC 138/SC 5 |
| ISO 13966:1998 Thermoplastics pipes and fittings -- Nominal ring stiffnesses | 90.93 | ISO/TC 138 |
| ISO 13967:2009 Thermoplastics fittings -- Determination of ring stiffness | 60.60 | ISO/TC 138/SC 5 |
| ISO 14236:2000 Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems | 90.93 | ISO/TC 138/SC 2 |
| ISO 14531-1:2002 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes | 90.93 | ISO/TC 138/SC 4 |
| ISO 14531-2:2004 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing | 90.93 | ISO/TC 138/SC 4 |
| ISO 14531-3:2010 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) | 60.60 | ISO/TC 138/SC 4 |
| ISO 14531-4:2006 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines | 90.93 | ISO/TC 138/SC 4 |
| ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure | 90.93 | ISO/TC 138/SC 6 |
| ISO 15306:2003/Amd 1:2012 | 60.60 | ISO/TC 138/SC 6 |
| ISO 15874-3:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO 15875-3:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings | 90.93 | ISO/TC 138/SC 2 |
| ISO 15876-3:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings | 90.92 | ISO/TC 138/SC 2 |
| ISO 15877-3:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-3:2009/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) | 90.93 | ISO/TC 138/SC 5 |
| ISO/DIS 16422.2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications | 40.60 | ISO/TC 138/SC 2 |
| ISO 16422:2006 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications | 90.92 | ISO/TC 138/SC 2 |
| ISO/WD 16611 Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests | 20.99 | ISO/TC 138/SC 6 |
| ISO 16871:2003 Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering | 90.93 | ISO/TC 138/SC 5 |
| ISO/TR 16913:1999 Plastics pipes and fittings -- Definitions of types of test | 90.93 | ISO/TC 138/SC 5 |
| ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 1: General | 60.60 | ISO/TC 138/SC 4 |
| ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 4 |
| ISO 17467-3:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 4 |
| ISO 17484-1:2006 Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems | 90.92 | ISO/TC 138/SC 4 |
| ISO/DIS 17484-1 Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems | 40.93 | ISO/TC 138/SC 4 |
| ISO 17484-1:2006/Cor 1:2008 | 60.60 | ISO/TC 138/SC 4 |
| ISO 17484-2:2009 Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice | 60.60 | ISO/TC 138/SC 4 |
| ISO/DIS 17885 Plastics piping systems -- Mechanical fittings for pressure piping systems -- Specifications | 40.60 | ISO/TC 138/SC 4 |
| ISO 18225:2012 Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems | 60.60 | ISO/TC 138/SC 4 |
| ISO/TS 18226:2006 Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) | 90.93 | ISO/TC 138/SC 4 |
| ISO/NP 18488 Polyethylene pipes -- Resistance to slow crack growth -- Strain Hardening test method | 10.99 | ISO/TC 138/SC 5 |
| ISO/NP 18489 Polyethylene pipes -- Resistance to slow crack growth -- Cracked Round Bar test method | 10.99 | ISO/TC 138/SC 5 |
| ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds | 90.60 | ISO/TC 138/SC 5 |
| ISO 18553:2002/Amd 1:2007 | 60.60 | ISO/TC 138/SC 5 |
| ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints | 60.60 | ISO/TC 138/SC 6 |
| ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators | 90.93 | ISO/TC 138/SC 4 |
| ISO 19893:2011 Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of mounted assemblies to temperature cycling | 60.60 | ISO/TC 138/SC 5 |
| ISO/TS 19911:2010 Plastics pipes and fittings -- Format of a technical file for characterizing PE spigot end fittings | 60.60 | ISO/TC 138/SC 5 |
| ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings | 90.93 | ISO/TC 138/SC 2 |
| ISO 21004:2006 Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply | 90.93 | ISO/TC 138/SC 2 |
| ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system | 90.93 | ISO/TC 138/SC 1 |
| ISO 21138-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A | 90.93 | ISO/TC 138/SC 1 |
| ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B | 90.93 | ISO/TC 138/SC 1 |
| ISO 21307:2011 Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems | 90.92 | ISO/TC 138/SC 4 |
| ISO 21751:2011 Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test | 60.60 | ISO/TC 138/SC 5 |
| ISO 22391-3:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO/TS 26873:2010 Plastics pipes and fittings -- Definition and construction procedures for reference lines | 60.60 | ISO/TC 138/SC 5 |
