Including testing equipment: industrial apparatus for X-ray and gamma radiography, penetrant flaw detectors, etc.
Industrial radiographic films, see 37.040.25
Non-destructive testing of metals, see 77.040.20
Non-destructive testing of welded joints, see 25.160.40
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO/TTA 3:2001 Polycrystalline materials -- Determination of residual stresses by neutron diffraction | 60.60 | VAMAS |
| ISO/TTA 4:2002 Measurement of thermal conductivity of thin films on silicon substrates | 60.60 | VAMAS |
| ISO 3057:1998 Non-destructive testing -- Metallographic replica techniques of surface examination | 90.93 | ISO/TC 135/SC 2 |
| ISO 3058:1998 Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers | 90.93 | ISO/TC 135/SC 2 |
| ISO 3059:2012 Non-destructive testing -- Penetrant testing and magnetic particle testing - Viewing conditions | 60.60 | ISO/TC 135/SC 2 |
| ISO 3452-1:2008 Non-destructive testing -- Penetrant testing -- Part 1: General principles | 90.92 | ISO/TC 135/SC 2 |
| ISO 3452-2:2006 Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials | 90.92 | ISO/TC 135/SC 2 |
| ISO 3452-3:1998 Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks | 90.92 | ISO/TC 135/SC 2 |
| ISO 3452-3:1998/Cor 1:2001 . | 60.60 | ISO/TC 135/SC 2 |
| ISO 3452-4:1998 Non-destructive testing -- Penetrant testing -- Part 4: Equipment | 90.93 | ISO/TC 135/SC 2 |
| ISO 3452-5:2008 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C | 90.60 | ISO/TC 135/SC 2 |
| ISO 3452-6:2008 Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degrees C | 90.60 | ISO/TC 135/SC 2 |
| ISO 3999:2004 Radiation protection -- Apparatus for industrial gamma radiography -- Specifications for performance, design and tests | 90.20 | ISO/TC 85/SC 2 |
| ISO 5576:1997 Non-destructive testing -- Industrial X-ray and gamma-ray radiology -- Vocabulary | 90.60 | ISO/TC 135/SC 5 |
| ISO 5577:2000 Non-destructive testing -- Ultrasonic inspection -- Vocabulary | 90.92 | ISO/TC 135/SC 3 |
| ISO 5580:1985 Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements | 90.93 | ISO/TC 135/SC 5 |
| ISO 9712:2012 Non-destructive testing -- Qualification and certification of NDT personnel | 60.60 | ISO/TC 135/SC 7 |
| ISO 9934-1:2001 Non-destructive testing -- Magnetic particle testing -- Part 1: General principles | 90.92 | ISO/TC 135/SC 2 |
| ISO 9934-2:2002 Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media | 90.92 | ISO/TC 135/SC 2 |
| ISO 9934-3:2002 Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment | 90.92 | ISO/TC 135/SC 2 |
| ISO 10375:1997 Non-destructive testing -- Ultrasonic inspection -- Characterization of search unit and sound field | 90.60 | ISO/TC 135/SC 3 |
| ISO 11537:1998 Non-destructive testing -- Thermal neutron radiographic testing -- General principles and basic rules | 90.93 | ISO/TC 135/SC 5 |
| ISO/TS 11774:2011 Non-destructive testing -- Performance-based qualification | 60.60 | ISO/TC 135/SC 7 |
| ISO 12706:2009 Non-destructive testing -- Penetrant testing -- Vocabulary | 60.60 | ISO/TC 135/SC 2 |
| ISO 12710:2002 Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments | 90.60 | ISO/TC 135/SC 3 |
| ISO 12713:1998 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers | 90.93 | ISO/TC 135/SC 9 |
| ISO 12714:1999 Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors | 90.93 | ISO/TC 135/SC 9 |
| ISO 12715:1999 Ultrasonic non-destructive testing -- Reference blocks and test procedures for the characterization of contact search unit beam profiles | 90.92 | ISO/TC 135/SC 3 |
| ISO 12716:2001 Non-destructive testing -- Acoustic emission inspection -- Vocabulary | 90.60 | ISO/TC 135/SC 9 |
| ISO 12718:2008 Non-destructive testing -- Eddy current testing -- Vocabulary | 90.93 | ISO/TC 135/SC 4 |
| ISO 12721:2000 Non-destructive testing -- Thermal neutron radiographic testing -- Determination of beam L/D ratio | 90.93 | ISO/TC 135/SC 5 |
| ISO/TR 13115:2011 Non-destructive testing -- Methods for absolute calibration of acoustic emission transducers by the reciprocity technique | 60.60 | ISO/TC 135/SC 9 |
| ISO 15548-1:2008 Non-destructive testing -- Equipment for eddy current examination -- Part 1: Instrument characteristics and verification | 90.92 | ISO/TC 135/SC 4 |
| ISO 15548-1:2008/Cor 1:2010 | 60.60 | ISO/TC 135/SC 4 |
| ISO 15548-2:2008 Non-destructive testing -- Equipment for eddy current examination -- Part 2: Probe characteristics and verification | 90.92 | ISO/TC 135/SC 4 |
| ISO 15548-3:2008 Non-destructive testing -- Equipment for eddy current examination -- Part 3: System characteristics and verification | 90.93 | ISO/TC 135/SC 4 |
| ISO 15549:2008 Non-destructive testing -- Eddy current testing -- General principles | 90.93 | ISO/TC 135/SC 4 |
| ISO 15708-1:2002 Non-destructive testing -- Radiation methods -- Computed tomography -- Part 1: Principles | 90.60 | ISO/TC 135/SC 5 |
| ISO 15708-2:2002 Non-destructive testing -- Radiation methods -- Computed tomography -- Part 2: Examination practices | 90.60 | ISO/TC 135/SC 5 |
| ISO 16371-1:2011 Non-destructive testing -- Industrial computed radiography with storage phosphor imaging plates -- Part 1: Classification of systems | 60.60 | ISO/TC 135/SC 5 |
| ISO 16526-1:2011 Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 1: Voltage divider method | 60.60 | ISO/TC 135/SC 5 |
| ISO 16526-2:2011 Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method | 60.60 | ISO/TC 135/SC 5 |
| ISO 16526-3:2011 Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method | 60.60 | ISO/TC 135/SC 5 |
| ISO 16809:2012 Non-destructive testing -- Ultrasonic thickness measurement | 60.60 | ISO/TC 135/SC 3 |
| ISO 16810:2012 Non-destructive testing -- Ultrasonic testing -- General principles | 60.60 | ISO/TC 135/SC 3 |
| ISO 16811:2012 Non-destructive testing -- Ultrasonic testing -- Sensitivity and range setting | 60.60 | ISO/TC 135/SC 3 |
| ISO 16823:2012 Non-destructive testing -- Ultrasonic testing -- Transmission technique | 60.60 | ISO/TC 135/SC 3 |
| ISO 16826:2012 Non-destructive testing -- Ultrasonic testing -- Examination for discontinuities perpendicular to the surface | 60.60 | ISO/TC 135/SC 3 |
| ISO 16827:2012 Non-destructive testing -- Ultrasonic testing -- Characterization and sizing of discontinuities | 60.60 | ISO/TC 135/SC 3 |
| ISO 16828:2012 Non-destructive testing -- Ultrasonic testing -- Time-of-flight diffraction technique as a method for detection and sizing of discontinuities | 60.60 | ISO/TC 135/SC 3 |
| ISO 16831:2012 Non-destructive testing -- Ultrasonic testing -- Characterization and verification of ultrasonic thickness measuring equipment | 60.60 | ISO/TC 135/SC 3 |
| ISO/TS 18173:2005 Non-destructive testing -- General terms and definitions | 90.20 | ISO/TC 135 |
| ISO 18175:2004 Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments | 90.60 | ISO/TC 135/SC 3 |
| ISO 19232-1:2004 Non-destructive testing -- Image quality of radiographs -- Part 1: Image quality indicators (wire type) -- Determination of image quality value | 90.92 | ISO/TC 135/SC 5 |
| ISO 19232-1:2004/Cor 1:2007 | 60.60 | ISO/TC 135/SC 5 |
| ISO 19232-2:2004 Non-destructive testing -- Image quality of radiographs -- Part 2: Image quality indicators (step/hole type) -- Determination of image quality value | 90.92 | ISO/TC 135/SC 5 |
| ISO 19232-2:2004/Cor 1:2007 | 60.60 | ISO/TC 135/SC 5 |
| ISO 19232-3:2004 Non-destructive testing -- Image quality of radiographs -- Part 3: Image quality classes for ferrous metals | 90.92 | ISO/TC 135/SC 5 |
| ISO 19232-4:2004 Non-destructive testing -- Image quality of radiographs -- Part 4: Experimental evaluation of image quality values and image quality tables | 90.92 | ISO/TC 135/SC 5 |
| ISO 19232-5:2004 Non-destructive testing -- Image quality of radiographs -- Part 5: Image quality indicators (duplex wire type) -- Determination of image unsharpness value | 90.92 | ISO/TC 135/SC 5 |
| ISO 20807:2004 Non-destructive testing -- Qualification of personnel for limited application of non-destructive testing | 90.60 | ISO/TC 135/SC 7 |
| ISO/TS 21432:2005 Non-destructive testing -- Standard test method for determining residual stresses by neutron diffraction | 90.93 | ISO/TC 135/SC 5 |
| ISO/TS 21432:2005/Cor 1:2008 | 60.60 | ISO/TC 135/SC 5 |
| ISO/TS 22809:2007 Non-destructive testing -- Discontinuities in specimens for use in qualification examinations | 90.93 | ISO/TC 135/SC 7 |
| ISO/TR 25107:2006 Non-destructive testing -- Guidelines for NDT training syllabuses | 90.92 | ISO/TC 135 |
| ISO/TR 25108:2006 Non-destructive testing -- Guidelines for NDT personnel training organizations | 90.92 | ISO/TC 135 |
