Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 2602:1980 Statistical interpretation of test results -- Estimation of the mean -- Confidence interval | 90.60 | ISO/TC 69 |
| ISO 2854:1976 Statistical interpretation of data -- Techniques of estimation and tests relating to means and variances | 90.60 | ISO/TC 69 |
| ISO 2859-1:1999 Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection | 90.93 | ISO/TC 69/SC 5 |
| ISO 2859-1:1999/Amd 1:2011 | 60.60 | ISO/TC 69/SC 5 |
| ISO 2859-1:1999/Cor 1:2001 | 60.60 | ISO/TC 69/SC 5 |
| ISO 2859-2:1985 Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection | 90.92 | ISO/TC 69/SC 5 |
| ISO 2859-3:2005 Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures | 90.93 | ISO/TC 69/SC 5 |
| ISO 2859-4:2002 Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels | 90.92 | ISO/TC 69/SC 5 |
| ISO 2859-5:2005 Sampling procedures for inspection by attributes -- Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection | 90.93 | ISO/TC 69/SC 5 |
| ISO 2859-10:2006 Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes | 90.93 | ISO/TC 69/SC 5 |
| ISO 3301:1975 Statistical interpretation of data -- Comparison of two means in the case of paired observations | 90.93 | ISO/TC 69 |
| ISO 3494:1976 Statistical interpretation of data -- Power of tests relating to means and variances | 90.93 | ISO/TC 69 |
| ISO 3534-1:2006 Statistics -- Vocabulary and symbols -- Part 1: General statistical terms and terms used in probability | 90.93 | ISO/TC 69/SC 1 |
| ISO 3534-2:2006 Statistics -- Vocabulary and symbols -- Part 2: Applied statistics | 90.92 | ISO/TC 69/SC 1 |
| ISO 3534-3:2013 Statistics -- Vocabulary and symbols -- Part 3: Design of experiments | 60.60 | ISO/TC 69/SC 1 |
| ISO/DIS 3534-4 Statistics -- Vocabulary and symbols -- Part 4: Survey sampling | 40.60 | ISO/TC 69/SC 1 |
| ISO/PRF 3951-1 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL | 50.00 | ISO/TC 69/SC 5 |
| ISO 3951-1:2005 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL | 90.92 | ISO/TC 69/SC 5 |
| ISO/PRF 3951-2 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics | 50.00 | ISO/TC 69/SC 5 |
| ISO 3951-2:2006 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics | 90.92 | ISO/TC 69/SC 5 |
| ISO 3951-2:2006/Amd 1:2009 | 60.60 | ISO/TC 69/SC 5 |
| ISO 3951-3:2007 Sampling procedures for inspection by variables -- Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection | 90.93 | ISO/TC 69/SC 5 |
| ISO 3951-4:2011 Sampling procedures for inspection by variables -- Part 4: Procedures for assessment of declared quality levels | 60.60 | ISO/TC 69/SC 5 |
| ISO 3951-5:2006 Sampling procedures for inspection by variables -- Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) | 90.93 | ISO/TC 69/SC 5 |
| ISO 5479:1997 Statistical interpretation of data -- Tests for departure from the normal distribution | 90.60 | ISO/TC 69 |
| ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions | 90.93 | ISO/TC 69/SC 6 |
| ISO 5725-1:1994/Cor 1:1998 | 60.60 | ISO/TC 69/SC 6 |
| ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method | 90.93 | ISO/TC 69/SC 6 |
| ISO 5725-2:1994/Cor 1:2002 | 60.60 | ISO/TC 69/SC 6 |
| ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method | 90.93 | ISO/TC 69/SC 6 |
| ISO 5725-3:1994/Cor 1:2001 | 60.60 | ISO/TC 69/SC 6 |
| ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method | 90.93 | ISO/TC 69/SC 6 |
| ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method | 90.93 | ISO/TC 69/SC 6 |
| ISO 5725-5:1998/Cor 1:2005 | 60.60 | ISO/TC 69/SC 6 |
| ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values | 90.93 | ISO/TC 69/SC 6 |
| ISO 5725-6:1994/Cor 1:2001 | 60.60 | ISO/TC 69/SC 6 |
| ISO 7870-1:2007 Control charts -- Part 1: General guidelines | 90.92 | ISO/TC 69/SC 4 |
| ISO/DIS 7870-1 Control charts -- Part 1: General guidelines | 40.20 | ISO/TC 69/SC 4 |
| ISO 7870-2:2013 Control charts -- Part 2: Shewhart control charts | 60.60 | ISO/TC 69/SC 4 |
| ISO 7870-3:2012 Control charts -- Part 3: Acceptance control charts | 60.60 | ISO/TC 69/SC 4 |
| ISO 7870-4:2011 Control charts -- Part 4: Cumulative sum charts | 60.60 | ISO/TC 69/SC 4 |
| ISO/DIS 7870-5 Control charts -- Part 5: Specialized control charts | 40.99 | ISO/TC 69/SC 4 |
| ISO/CD 7870-6 Statistical Methods in Process Management -- Control Charts -- Part 6: EWMA Control Charts | 30.00 | ISO/TC 69/SC 4 |
| ISO 7873:1993 Control charts for arithmetic average with warning limits | 90.93 | ISO/TC 69/SC 4 |
| ISO 8422:2006 Sequential sampling plans for inspection by attributes | 90.93 | ISO/TC 69/SC 5 |
| ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) | 90.93 | ISO/TC 69/SC 5 |
| ISO/TR 8550-1:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 1: Acceptance sampling | 60.60 | ISO/TC 69/SC 5 |
| ISO/TR 8550-2:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 2: Sampling by attributes | 60.60 | ISO/TC 69/SC 5 |
| ISO/TR 8550-3:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 3: Sampling by variables | 60.60 | ISO/TC 69/SC 5 |
| ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000 | 60.60 | ISO/TC 176/SC 3 |
| ISO 10576-1:2003 Statistical methods -- Guidelines for the evaluation of conformity with specified requirements -- Part 1: General principles | 90.93 | ISO/TC 69/SC 6 |
| ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials | 90.60 | ISO/TC 69/SC 6 |
| ISO 11095:1996 Linear calibration using reference materials | 90.93 | ISO/TC 69/SC 6 |
| ISO 11453:1996 Statistical interpretation of data -- Tests and confidence intervals relating to proportions | 90.93 | ISO/TC 69 |
| ISO 11453:1996/Cor 1:1999 | 60.60 | ISO/TC 69 |
| ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) -- Part 1: Elements of SPC | 90.60 | ISO/TC 69/SC 4 |
| ISO 11462-2:2010 Guidelines for implementation of statistical process control (SPC) -- Part 2: Catalogue of tools and techniques | 60.60 | ISO/TC 69/SC 4 |
| ISO 11648-1:2003 Statistical aspects of sampling from bulk materials -- Part 1: General principles | 90.93 | ISO/TC 69/SC 6 |
| ISO 11648-2:2001 Statistical aspects of sampling from bulk materials -- Part 2: Sampling of particulate materials | 90.93 | ISO/TC 69/SC 6 |
| ISO 11843-1:1997 Capability of detection -- Part 1: Terms and definitions | 90.93 | ISO/TC 69/SC 6 |
| ISO 11843-1:1997/Cor 1:2003 | 60.60 | ISO/TC 69/SC 6 |
| ISO 11843-2:2000 Capability of detection -- Part 2: Methodology in the linear calibration case | 90.93 | ISO/TC 69/SC 6 |
| ISO 11843-2:2000/Cor 1:2007 | 60.60 | ISO/TC 69/SC 6 |
| ISO 11843-3:2003 Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used | 90.93 | ISO/TC 69/SC 6 |
| ISO 11843-4:2003 Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value | 90.93 | ISO/TC 69/SC 6 |
| ISO 11843-5:2008 Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases | 90.93 | ISO/TC 69/SC 6 |
| ISO 11843-6:2013 Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations | 60.60 | ISO/TC 69/SC 6 |
| ISO 11843-7:2012 Capability of detection -- Part 7: Methodology based on stochastic properties of instrumental noise | 60.60 | ISO/TC 69/SC 6 |
| ISO/TR 12845:2010 Selected illustrations of fractional factorial screening experiments | 60.60 | ISO/TC 69/SC 7 |
| ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies | 60.60 | ISO/TC 69/SC 7 |
| ISO 13053-1:2011 Quantitative methods in process improvement -- Six Sigma -- Part 1: DMAIC methodology | 60.60 | ISO/TC 69/SC 7 |
| ISO 13053-2:2011 Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques | 60.60 | ISO/TC 69/SC 7 |
| ISO/NP TR 13195 Selected illustrations of response surface method | 10.99 | ISO/TC 69/SC 7 |
| ISO 13448-1:2005 Acceptance sampling procedures based on the allocation of priorities principle (APP) -- Part 1: Guidelines for the APP approach | 90.20 | ISO/TC 69/SC 5 |
| ISO 13448-2:2004 Acceptance sampling procedures based on the allocation of priorities principle (APP) -- Part 2: Coordinated single sampling plans for acceptance sampling by attributes | 90.93 | ISO/TC 69/SC 5 |
| ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software | 60.60 | ISO/TC 69 |
| ISO/DIS 13528 Statistical methods for use in proficiency testing by interlaboratory comparisons | 40.60 | ISO/TC 69/SC 6 |
| ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons | 90.92 | ISO/TC 69/SC 6 |
| ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty | 60.60 | ISO/TC 69/SC 6 |
| ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis | 60.60 | ISO/TC 69/SC 7 |
| ISO 14560:2004 Acceptance sampling procedures by attributes -- Specified quality levels in nonconforming items per million | 90.93 | ISO/TC 69/SC 5 |
| ISO 16269-4:2010 Statistical interpretation of data -- Part 4: Detection and treatment of outliers | 60.60 | ISO/TC 69 |
| ISO 16269-6:2005 Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals | 90.92 | ISO/TC 69 |
| ISO/FDIS 16269-6 Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals | 50.00 | ISO/TC 69 |
| ISO 16269-7:2001 Statistical interpretation of data -- Part 7: Median -- Estimation and confidence intervals | 90.93 | ISO/TC 69 |
| ISO 16269-8:2004 Statistical interpretation of data -- Part 8: Determination of prediction intervals | 90.93 | ISO/TC 69 |
| ISO/DIS 16336 Robust parameter design (RPD) | 40.60 | ISO/TC 69/SC 8 |
| ISO/AWI 16355-1 Application of statistical and related methods to New technology and Product Development Process -- Part 1: General Principle and Perspective of QFD Process | 20.00 | ISO/TC 69/SC 8 |
| ISO/AWI 16355-2 Application of statistical and related methods to New technology and Product Development Process -- Part 2: Acquisition of Non-quantitative VOC or VOS | 20.00 | ISO/TC 69/SC 8 |
| ISO/AWI 16355-3 Application of statistical and related methods to New technology and Product Development Process -- Part 3: Acquisition of Quantitative VOC or VOS | 20.00 | ISO/TC 69/SC 8 |
| ISO/AWI 16355-4 Application of statistical and related methods to New technology and Product Development Process -- Part 4: Analysis of Non-Quantitative and Quantitative VOC/VOS | 20.00 | ISO/TC 69/SC 8 |
| ISO/AWI 16355-5 Application of statistical and related methods to New technology and Product Development Process -- Part 5: Solution Strategy | 20.00 | ISO/TC 69/SC 8 |
| ISO/AWI 16355-6 Application of statistical and related methods to New technology and Product Development Process -- Part 6: Optimization - Robust parameter design | 20.00 | ISO/TC 69/SC 8 |
| ISO/AWI 16355-7 Application of statistical and related methods to New technology and Product Development Process -- Part 7: Optimization - Tolerance design and output to manufacturing | 20.00 | ISO/TC 69/SC 8 |
| ISO/AWI 16355-8 Application of statistical and related methods to New technology and Product Development Process -- Part 8: Guidelines for Commercialization | 20.00 | ISO/TC 69/SC 8 |
| ISO/NP TR 16705 Selected illustrations of contingency table analysis | 10.99 | ISO/TC 69/SC 7 |
| ISO/CD 17258 Benchmark for Six Sigma method | 30.99 | ISO/TC 69/SC 7 |
| ISO/WD 18404 Competencies for key personnel in relation to Six Sigma and Lean implementation | 20.20 | ISO/TC 69/SC 7 |
| ISO 18414:2006 Acceptance sampling procedures by attributes -- Accept-zero sampling system based on credit principle for controlling outgoing quality | 90.93 | ISO/TC 69/SC 5 |
| ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization | 60.60 | ISO/TC 69 |
| ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance | 90.93 | ISO/TC 69/SC 5 |
| ISO 21747:2006 Statistical methods -- Process performance and capability statistics for measured quality characteristics | 90.92 | ISO/TC 69/SC 4 |
| ISO/CD 22514-1 Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts | 30.99 | ISO/TC 69/SC 4 |
| ISO 22514-1:2009 Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts | 90.92 | ISO/TC 69/SC 4 |
| ISO/FDIS 22514-2 Statistical methods in process management -- Capability and performance -- Part 2: Process capability and performance of time-dependent process models | 50.20 | ISO/TC 69/SC 4 |
| ISO 22514-3:2008 Statistical methods in process management -- Capability and performance -- Part 3: Machine performance studies for measured data on discrete parts | 90.60 | ISO/TC 69/SC 4 |
| ISO/TR 22514-4:2007 Statistical methods in process management -- Capability and performance -- Part 4: Process capability estimates and performance measures | 60.60 | ISO/TC 69/SC 4 |
| ISO 22514-6:2013 Statistical methods in process management -- Capability and performance -- Part 6: Process capability statistics for characteristics following a multivariate normal distribution | 60.60 | ISO/TC 69/SC 4 |
| ISO 22514-7:2012 Statistical methods in process management -- Capability and performance -- Part 7: Capability of measurement processes | 60.60 | ISO/TC 69/SC 4 |
| ISO/CD 22514-8 Statistical methods in process management -- Capability and performance -- Part 8: Machine performance of a multi-state production process | 30.99 | ISO/TC 69/SC 4 |
| ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results -- Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results | 60.60 | ISO/TC 69/SC 6 |
| ISO 24153:2009 Random sampling and randomization procedures | 60.60 | ISO/TC 69/SC 5 |
| ISO/TS 28037:2010 Determination and use of straight-line calibration functions | 60.60 | ISO/TC 69/SC 6 |
| ISO 28640:2010 Random variate generation methods | 60.60 | ISO/TC 69 |
| ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) | 60.60 | ISO/TC 69/SC 5 |
| ISO/TR 29901:2007 Selected illustrations of full factorial experiments with four factors | 60.60 | ISO/TC 69/SC 7 |
| ISO/TR 29901:2007/Cor 1:2009 | 60.60 | ISO/TC 69/SC 7 |
