Home

Standards catalogue

Subscribe to updates

ISO/TC 213  - Dimensional and geometrical product specifications and verification

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 213 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 1:2002
Geometrical Product Specifications (GPS) -- Standard reference temperature for geometrical product specification and verification
90.93 17.040.01ISO/TC 213
ISO 286-1:2010
Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
60.60 17.040.10ISO/TC 213
ISO 286-1:2010/Cor 1:2013
60.60 17.040.10ISO/TC 213
ISO 286-2:2010
Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
60.60 17.040.10ISO/TC 213
ISO 286-2:2010/Cor 1:2013
60.60 17.040.10ISO/TC 213
ISO 463:2006
Geometrical Product Specifications (GPS) -- Dimensional measuring equipment -- Design and metrological characteristics of mechanical dial gauges
90.20 17.040.30ISO/TC 213
ISO 463:2006/Cor 1:2007
60.60 17.040.30ISO/TC 213
ISO 463:2006/Cor 2:2009
60.60 17.040.30ISO/TC 213
ISO 1101:2012
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out
90.92 01.100.20
17.040.10
ISO/TC 213
ISO 1101:2012/Cor 1:2013
60.60 01.100.20
17.040.10
ISO/TC 213
ISO 1119:2011
Geometrical product specifications (GPS) -- Series of conical tapers and taper angles
60.60 17.040.01ISO/TC 213
ISO 1302:2002
Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation
90.93 01.100.20
17.040.20
ISO/TC 213
ISO 1660:1987
Technical drawings -- Dimensioning and tolerancing of profiles
90.92 01.100.20ISO/TC 213
ISO/R 1938:1971
ISO system of limits and fits -- Part II : Inspection of plain workpieces
90.92 17.040.10ISO/TC 213
ISO 2538:1998
Geometrical Product Specifications (GPS) -- Series of angles and slopes on prisms
90.92 17.040.01ISO/TC 213
ISO 2692:2006
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
90.92 01.100.20ISO/TC 213
ISO 2768-1:1989
General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
90.93 17.040.10ISO/TC 213
ISO 2768-2:1989
General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications
90.93 17.040.10ISO/TC 213
ISO 3040:2009
Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
60.60 01.100.20ISO/TC 213
ISO 3274:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
90.93 17.040.30ISO/TC 213
ISO 3274:1996/Cor 1:1998
60.60 17.040.30ISO/TC 213
ISO 3611:2010
Geometrical product specifications (GPS) -- Dimensional measuring equipment: Micrometers for external measurements -- Design and metrological characteristics
60.60 17.040.30ISO/TC 213
ISO 3650:1998
Geometrical Product Specifications (GPS) -- Length standards -- Gauge blocks
90.20 17.040.30ISO/TC 213
ISO 3650:1998/Cor 1:2008
60.60 17.040.30ISO/TC 213
ISO 4287:1997
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
90.60 17.040.20
01.040.17
ISO/TC 213
ISO 4287:1997/Cor 1:1998
60.60 17.040.20
01.040.17
ISO/TC 213
ISO 4287:1997/Amd 1:2009
Peak count number
60.60 17.040.20
01.040.17
ISO/TC 213
ISO 4287:1997/Cor 2:2005
60.60 17.040.20
01.040.17
ISO/TC 213
ISO 4288:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
90.93 17.040.20ISO/TC 213
ISO 4288:1996/Cor 1:1998
60.60 17.040.20ISO/TC 213
ISO 4291:1985
Methods for the assessement of departure from roundness -- Measurement of variations in radius
90.20 17.040.20ISO/TC 213
ISO 5436-1:2000
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures
90.60 17.040.30ISO/TC 213
ISO 5436-2:2012
Geometrical product specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 2: Software measurement standards
60.60 17.040.30ISO/TC 213
ISO 5458:1998
Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Positional tolerancing
90.92 17.040.10ISO/TC 213
ISO 5459:2011
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Datums and datum systems
90.92 17.040.10
01.100.20
ISO/TC 213
ISO 7863:1984
Height setting micrometers and riser blocks
90.93 17.040.30ISO/TC 213
ISO 8015:2011
Geometrical product specifications (GPS) -- Fundamentals -- Concepts, principles and rules
60.60 01.100.20ISO/TC 213
ISO 8062-1:2007
Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 1: Vocabulary
90.93 17.040.10
01.040.17
ISO/TC 213
ISO/TS 8062-2:2013
Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 2: Rules
60.60 17.040.10ISO/TC 213
ISO 8062-3:2007
Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 3: General dimensional and geometrical tolerances and machining allowances for castings
90.93 17.040.10ISO/TC 213
ISO 8062-3:2007/Cor 1:2009
60.60 17.040.10ISO/TC 213
ISO 8512-1:1990
Surface plates -- Part 1: Cast iron
90.93 17.040.30ISO/TC 213
ISO 8512-2:1990
Surface plates -- Part 2: Granite
90.93 17.040.30ISO/TC 213
ISO 8785:1998
Geometrical Product Specification (GPS) -- Surface imperfections -- Terms, definitions and parameters
90.20 01.040.17
17.040.20
ISO/TC 213
ISO 9493:2010
Geometrical product specifications (GPS) -- Dimensional measuring equipment: Dial test indicators (lever type) -- Design and metrological characteristics
60.60 17.040.30ISO/TC 213
ISO 10135:2007
Geometrical product specifications (GPS) -- Drawing indications for moulded parts in technical product documentation (TPD)
90.93 01.100.20ISO/TC 213
ISO 10360-1:2000
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: Vocabulary
90.60 01.040.17
17.040.30
ISO/TC 213
ISO 10360-1:2000/Cor 1:2002
60.60 01.040.17
17.040.30
ISO/TC 213
ISO 10360-2:2009
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions
60.60 17.040.30ISO/TC 213
ISO 10360-3:2000
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 3: CMMs with the axis of a rotary table as the fourth axis
90.93 17.040.30ISO/TC 213
ISO 10360-4:2000
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 4: CMMs used in scanning measuring mode
90.60 17.040.30ISO/TC 213
ISO 10360-4:2000/Cor 1:2002
60.60 17.040.30ISO/TC 213
ISO 10360-5:2010
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using single and multiple stylus contacting probing systems
60.60 17.040.30ISO/TC 213
ISO 10360-6:2001
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features
90.93 17.040.30ISO/TC 213
ISO 10360-6:2001/Cor 1:2007
60.60 17.040.30ISO/TC 213
ISO 10360-7:2011
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 7: CMMs equipped with imaging probing systems
60.60 17.040.30ISO/TC 213
ISO 10360-8:2013
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 8: CMMs with optical distance sensors
60.60 17.040.30ISO/TC 213
ISO 10360-9:2013
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 9: CMMs with multiple probing systems
60.60 17.040.30ISO/TC 213
ISO 10579:2010
Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Non-rigid parts
60.60 01.100.20ISO/TC 213
ISO 10579:2010/Cor 1:2011
60.60 01.100.20ISO/TC 213
ISO 12085:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Motif parameters
90.93 17.040.20ISO/TC 213
ISO 12085:1996/Cor 1:1998
60.60 17.040.20ISO/TC 213
ISO 12179:2000
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments
90.60 17.040.30ISO/TC 213
ISO 12179:2000/Cor 1:2003
60.60 17.040.30ISO/TC 213
ISO 12180-1:2011
Geometrical product specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical form
60.60 17.040.20
01.040.17
ISO/TC 213
ISO 12180-2:2011
Geometrical product specifications (GPS) -- Cylindricity -- Part 2: Specification operators
60.60 17.040.20ISO/TC 213
ISO 12181-1:2011
Geometrical product specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness
60.60 17.040.20
01.040.17
ISO/TC 213
ISO 12181-2:2011
Geometrical product specifications (GPS) -- Roundness -- Part 2: Specification operators
60.60 17.040.20ISO/TC 213
ISO 12780-1:2011
Geometrical product specifications (GPS) -- Straightness -- Part 1: Vocabulary and parameters of straightness
60.60 01.040.17
17.040.20
ISO/TC 213
ISO 12780-2:2011
Geometrical product specifications (GPS) -- Straightness -- Part 2: Specification operators
60.60 17.040.20ISO/TC 213
ISO 12781-1:2011
Geometrical product specifications (GPS) -- Flatness -- Part 1: Vocabulary and parameters of flatness
60.60 01.040.17
17.040.20
ISO/TC 213
ISO 12781-2:2011
Geometrical product specifications (GPS) -- Flatness -- Part 2: Specification operators
60.60 17.040.20ISO/TC 213
ISO 13102:2012
Geometrical product specifications (GPS) -- Dimensional measuring equipment: Electronic digital-indicator gauge -- Design and metrological characteristics
60.60 17.040.30ISO/TC 213
ISO 13225:2012
Geometrical product specifications (GPS) -- Dimensional measuring equipment; Height gauges -- Design and metrological characteristics
60.60 17.040.30ISO/TC 213
ISO 13385-1:2011
Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 1: Callipers; Design and metrological characteristics
60.60 17.040.30ISO/TC 213
ISO 13385-2:2011
Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Calliper depth gauges; Design and metrological characteristics
60.60 17.040.30ISO/TC 213
ISO 13565-1:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions
90.93 17.040.20ISO/TC 213
ISO 13565-1:1996/Cor 1:1998
60.60 17.040.20ISO/TC 213
ISO 13565-2:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve
90.93 17.040.20ISO/TC 213
ISO 13565-2:1996/Cor 1:1998
60.60 17.040.20ISO/TC 213
ISO 13565-3:1998
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve
90.20 17.040.20ISO/TC 213
ISO 14253-1:2013
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformity or nonconformity with specifications
60.60 17.040.01ISO/TC 213
ISO 14253-2:2011
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
60.60 17.040.01ISO/TC 213
ISO 14253-2:2011/Cor 1:2013
60.60 17.040.01ISO/TC 213
ISO 14253-3:2011
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 3: Guidelines for achieving agreements on measurement uncertainty statements
60.60 17.040.01ISO/TC 213
ISO/TS 14253-4:2010
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 4: Background on functional limits and specification limits in decision rules
90.92 17.040.01ISO/TC 213
ISO/TR 14253-6:2012
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
60.60 17.040.01ISO/TC 213
ISO 14405-1:2010
Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
90.92 17.040.10ISO/TC 213
ISO 14405-2:2011
Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
60.60 17.040.10ISO/TC 213
ISO 14406:2010
Geometrical product specifications (GPS) -- Extraction
60.60 17.040.01ISO/TC 213
ISO/TR 14638:1995
Geometrical product specification (GPS) -- Masterplan
90.92 17.040.01ISO/TC 213
ISO 14660-2:1999
Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
90.93 01.100.20
17.040.01
ISO/TC 213
ISO 14978:2006
Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment
90.93 17.040.30ISO/TC 213
ISO 14978:2006/Cor 1:2008
60.60 17.040.30ISO/TC 213
ISO/TS 15530-1:2013
Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 1: Overview and metrological characteristics
60.60 17.040.30ISO/TC 213
ISO 15530-3:2011
Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards
60.60 17.040.30ISO/TC 213
ISO/TS 15530-4:2008
Geometrical Product Specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 4: Evaluating task-specific measurement uncertainty using simulation
90.93 17.040.30ISO/TC 213
ISO/TR 16015:2003
Geometrical product specifications (GPS) -- Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
90.93 17.040.01ISO/TC 213
ISO/TS 16610-1:2006
Geometrical product specifications (GPS) -- Filtration -- Part 1: Overview and basic concepts
90.92 17.040.20ISO/TC 213
ISO/TS 16610-20:2006
Geometrical product specifications (GPS) -- Filtration -- Part 20: Linear profile filters: Basic concepts
90.92 17.040.20ISO/TC 213
ISO 16610-21:2011
Geometrical product specifications (GPS) -- Filtration -- Part 21: Linear profile filters: Gaussian filters
60.60 17.040.20ISO/TC 213
ISO/TS 16610-22:2006
Geometrical product specifications (GPS) -- Filtration -- Part 22: Linear profile filters: Spline filters
90.92 17.040.20ISO/TC 213
ISO/TS 16610-28:2010
Geometrical product specifications (GPS) -- Filtration -- Part 28: Profile filters: End effects
90.92 17.040.20ISO/TC 213
ISO/TS 16610-29:2006
Geometrical product specifications (GPS) -- Filtration -- Part 29: Linear profile filters: Spline wavelets
90.92 17.040.20ISO/TC 213
ISO/TS 16610-30:2009
Geometrical product specifications (GPS) -- Filtration -- Part 30: Robust profile filters: Basic concepts
90.92 17.040.20ISO/TC 213
ISO/TS 16610-31:2010
Geometrical product specifications (GPS) -- Filtration -- Part 31: Robust profile filters: Gaussian regression filters
90.92 17.040.20ISO/TC 213
ISO/TS 16610-32:2009
Geometrical product specifications (GPS) -- Filtration -- Part 32: Robust profile filters: Spline filters
90.92 17.040.20ISO/TC 213
ISO/TS 16610-40:2006
Geometrical product specifications (GPS) -- Filtration -- Part 40: Morphological profile filters: Basic concepts
90.92 17.040.20ISO/TC 213
ISO/TS 16610-41:2006
Geometrical product specifications (GPS) -- Filtration -- Part 41: Morphological profile filters: Disk and horizontal line-segment filters
90.92 17.040.20ISO/TC 213
ISO/TS 16610-49:2006
Geometrical product specifications (GPS) -- Filtration -- Part 49: Morphological profile filters: Scale space techniques
90.92 17.040.20ISO/TC 213
ISO 16610-85:2013
Geometrical product specifications (GPS) -- Filtration -- Part 85: Morphological areal filters: Segmentation
60.60 17.040.20ISO/TC 213
ISO 17450-1:2011
Geometrical product specifications (GPS) -- General concepts -- Part 1: Model for geometrical specification and verification
60.60 17.040.01ISO/TC 213
ISO 17450-2:2012
Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
60.60 17.040.01ISO/TC 213
ISO/TS 17863:2013
Geometrical product specification (GPS) -- Geometrical tolerancing of moveable assemblies
60.60 17.040.01ISO/TC 213
ISO 22432:2011
Geometrical product specifications (GPS) -- Features utilized in specification and verification
60.60 17.040.01ISO/TC 213
ISO/TS 23165:2006
Geometrical product specifications (GPS) -- Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
90.93 17.020ISO/TC 213
ISO/TR 23605:2009
Technical product specification (TPS) -- Application guidance -- International model for national implementation
60.60 01.100.01ISO/TC 213
ISO 25178-2:2012
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 2: Terms, definitions and surface texture parameters
60.60 17.040.20ISO/TC 213
ISO 25178-3:2012
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 3: Specification operators
60.60 17.040.20ISO/TC 213
ISO 25178-6:2010
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 6: Classification of methods for measuring surface texture
60.60 17.040.20ISO/TC 213
ISO 25178-70:2014
Geometrical product specification (GPS) -- Surface texture: Areal -- Part 70: Material measures
60.60 17.040.20ISO/TC 213
ISO 25178-71:2012
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 71: Software measurement standards
90.92 17.040.20ISO/TC 213
ISO 25178-601:2010
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 601: Nominal characteristics of contact (stylus) instruments
60.60 17.040.20ISO/TC 213
ISO 25178-602:2010
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
60.60 17.040.20ISO/TC 213
ISO 25178-603:2013
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
60.60 17.040.20ISO/TC 213
ISO 25178-604:2013
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
60.60 17.040.20ISO/TC 213
ISO 25178-605:2014
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
60.60 17.040.20ISO/TC 213
ISO 25178-701:2010
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments
60.60 17.040.20ISO/TC 213
ISO 25378:2011
Geometrical product specifications (GPS) -- Characteristics and conditions -- Definitions
60.60 17.040.01ISO/TC 213