Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 517:2008 Photography -- Apertures and related properties pertaining to photographic lenses -- Designations and measurements | 90.93 | 37.040.10 | ISO/TC 172/SC 1 |
| ISO 7944:1998 Optics and optical instruments -- Reference wavelengths | 90.93 | 17.180.01 | ISO/TC 172 |
| ISO 7944:1998/Cor 1:2009 | 60.60 | 17.180.01 | ISO/TC 172 |
| ISO 7998:2005 Ophthalmic optics -- Spectacle frames -- Lists of equivalent terms and vocabulary | 90.93 | 01.040.11 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8036:2006 Optics and photonics -- Microscopes -- Immersion liquids for light microscopy | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8037-1:1986 Optics and optical instruments -- Microscopes -- Slides -- Part 1: Dimensions, optical properties and marking | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8037-2:1997 Optics and optical instruments -- Microscopes -- Slides -- Part 2: Quality of material, standards of finish and mode of packaging | 90.92 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8037-2:1997/Cor 1:2002 | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8038:2011 Microscopes -- Screw threads for objectives and related nosepieces | 90.92 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8039:2012 Microscopes -- Values, tolerances and symbols for magnification | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8040:2001 Optics and optical instruments -- Microscopes -- Dimensions of tube slide and tube slot connections | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8255-1:2011 Microscopes -- Cover glasses -- Part 1: Dimensional tolerances, thickness and optical properties | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8255-2:1997 Optics and optical instruments -- Microscopes -- Cover glasses -- Part 2: Quality of materials, standards of finish and mode of packaging | 90.92 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8424:1996 Raw optical glass -- Resistance to attack by aqueous acidic solutions at 25 degrees C -- Test method and classification | 90.60 | 81.040.10 | ISO/TC 172/SC 3 |
| ISO 8429:1986 Optics and optical instruments -- Ophthalmology -- Graduated dial scale | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8478:1996 Photography -- Camera lenses -- Measurement of ISO spectral transmittance | 90.93 | 37.040.10 | ISO/TC 172/SC 1 |
| ISO 8576:1996 Optics and optical instruments -- Microscopes -- Reference system of polarized light microscopy | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8577:1997 Optics and optical instruments -- Microscopes -- Spectral filters | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8578:2012 Microscopes -- Marking of objectives and eyepieces | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO 8596:2009 Ophthalmic optics -- Visual acuity testing -- Standard optotype and its presentation | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8598:1996 Optics and optical instruments -- Focimeters | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8598:1996/Cor 1:1998 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8600-1:2013 Endoscopes -- Medical endoscopes and endotherapy devices -- Part 1: General requirements | 60.60 | 11.040.55 | ISO/TC 172/SC 5 |
| ISO 8600-2:2002 Optics and optical instruments -- Medical endoscopes and endoscopic accessories -- Part 2: Particular requirements for rigid bronchoscopes | 90.92 | 11.040.55 | ISO/TC 172/SC 5 |
| ISO 8600-3:1997 Optics and optical instruments -- Medical endoscopes and endoscopic accessories -- Part 3: Determination of field of view and direction of view of endoscopes with optics | 90.20 | 11.040.55 | ISO/TC 172/SC 5 |
| ISO 8600-3:1997/Amd 1:2003 | 60.60 | 11.040.55 | ISO/TC 172/SC 5 |
| ISO 8600-4:1997 Optics and optical instruments -- Medical endoscopes and certain accessories -- Part 4: Determination of maximum width of insertion portion | 90.92 | 11.040.55 | ISO/TC 172/SC 5 |
| ISO 8600-5:2005 Optics and photonics -- Medical endoscopes and endotherapy devices -- Part 5: Determination of optical resolution of rigid endoscopes with optics | 90.20 | 11.040.55 37.020 | ISO/TC 172/SC 5 |
| ISO 8600-6:2005 Optics and photonics -- Medical endoscopes and endotherapy devices -- Part 6: Vocabulary | 90.20 | 37.020 11.040.55 01.040.37 | ISO/TC 172/SC 5 |
| ISO 8600-7:2012 Endoscopes -- Medical endoscopes and endotherapy devices -- Part 7: Basic requirements for medical endoscopes of water-resistant type | 60.60 | 11.040.55 | ISO/TC 172/SC 5 |
| ISO 8612:2009 Ophthalmic instruments -- Tonometers | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8624:2011 Ophthalmic optics -- Spectacle frames -- Measuring system and terminology | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8980-1:2004 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 1: Specifications for single-vision and multifocal lenses | 90.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8980-1:2004/Cor 1:2006 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8980-2:2004 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 2: Specifications for progressive power lenses | 90.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8980-2:2004/Cor 1:2006 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8980-3:2003 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 3: Transmittance specifications and test methods | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8980-4:2006 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 4: Specifications and test methods for anti-reflective coatings | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 8980-5:2005 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 9022-1:2012 Optics and photonics -- Environmental test methods -- Part 1: Definitions, extent of testing | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-2:2002 Optics and optical instruments -- Environmental test methods -- Part 2: Cold, heat and humidity | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-3:1998 Optics and optical instruments -- Environmental test methods -- Part 3: Mechanical stress | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-4:2002 Optics and optical instruments -- Environmental test methods -- Part 4: Salt mist | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-5:1994 Optics and optical instruments -- Environmental test methods -- Part 5: Combined cold, low air pressure | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-6:1994 Optics and optical instruments -- Environmental test methods -- Part 6: Dust | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-7:2005 Optics and photonics -- Environmental test methods -- Part 7: Resistance to drip or rain | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-8:1994 Optics and optical instruments -- Environmental test methods -- Part 8: High pressure, low pressure, immersion | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-9:1994 Optics and optical instruments -- Environmental test methods -- Part 9: Solar radiation | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-11:1994 Optics and optical instruments -- Environmental test methods -- Part 11: Mould growth | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-12:1994 Optics and optical instruments -- Environmental test methods -- Part 12: Contamination | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-14:1994 Optics and optical instruments -- Environmental test methods -- Part 14: Dew, hoarfrost, ice | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-17:1994 Optics and optical instruments -- Environmental test methods -- Part 17: Combined contamination, solar radiation | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-18:1994 Optics and optical instruments -- Environmental test methods -- Part 18: Combined damp heat and low internal pressure | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-20:1997 Optics and optical instruments -- Environmental test methods -- Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-21:1998 Optics and optical instruments -- Environmental test methods -- Part 21: Combined low pressure and ambient temperature or dry heat | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9022-22:2012 Optics and photonics -- Environmental test methods -- Part 22: Combined cold, dry heat or temperature change with bump or random vibration | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9039:2008 Optics and photonics -- Quality evaluation of optical systems -- Determination of distortion | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9211-1:2010 Optics and photonics -- Optical coatings -- Part 1: Definitions | 60.60 | 37.020 01.040.37 | ISO/TC 172/SC 3 |
| ISO 9211-2:2010 Optics and photonics -- Optical coatings -- Part 2: Optical properties | 60.60 | 37.020 | ISO/TC 172/SC 3 |
| ISO 9211-3:2008 Optics and photonics -- Optical coatings -- Part 3: Environmental durability | 90.93 | 37.020 | ISO/TC 172/SC 3 |
| ISO 9211-4:2012 Optics and photonics -- Optical coatings -- Part 4: Specific test methods | 60.60 | 37.020 | ISO/TC 172/SC 3 |
| ISO 9334:2012 Optics and photonics -- Optical transfer function -- Definitions and mathematical relationships | 60.60 | 17.180.01 | ISO/TC 172/SC 1 |
| ISO 9335:2012 Optics and photonics -- Optical transfer function -- Principles and procedures of measurement | 60.60 | 17.180.01 | ISO/TC 172/SC 1 |
| ISO 9336-1:2010 Optics and photonics -- Optical transfer function -- Application -- Part 1: Interchangeable lenses for 35 mm still cameras | 60.60 | 37.040.10 | ISO/TC 172/SC 1 |
| ISO 9336-3:1994 Optics and optical instruments -- Optical transfer function -- Application -- Part 3: Telescopes | 90.93 | 37.020 | ISO/TC 172/SC 4 |
| ISO 9342-1:2005 Optics and optical instruments -- Test lenses for calibration of focimeters -- Part 1: Test lenses for focimeters used for measuring spectacle lenses | 90.20 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 9342-2:2005 Optics and optical instruments -- Test lenses for calibration of focimeters -- Part 2: Test lenses for focimeters used for measuring contact lenses | 90.20 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 9344:2011 Microscopes -- Graticules for eyepieces | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO 9345-1:2012 Microscopes -- Imaging distances related to mechanical reference planes -- Part 1: Tube length 160 mm | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO 9345-2:2003 Optics and optical instruments -- Microscopes: Imaging distances related to mechanical reference planes -- Part 2: Infinity-corrected optical systems | 90.20 | 37.020 | ISO/TC 172/SC 5 |
| ISO 9358:1994 Optics and optical instruments -- Veiling glare of image forming systems -- Definitions and methods of measurement | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 9385:1990 Glass and glass-ceramics -- Knoop hardness test | 90.93 | 81.040.01 81.060.01 | ISO/TC 172/SC 3 |
| ISO 9394:2012 Ophthalmic optics -- Contact lenses and contact lens care products -- Determination of biocompatibility by ocular study with rabbit eyes | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 9689:1990 Raw optical glass -- Resistance to attack by aqueous alkaline phosphate-containing detergent solutions at 50 degrees C -- Testing and classification | 90.93 | 81.040.10 | ISO/TC 172/SC 3 |
| ISO 9801:2009 Ophthalmic instruments -- Trial case lenses | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 9802:1996 Raw optical glass -- Vocabulary | 90.93 | 81.040.10 01.040.81 | ISO/TC 172/SC 3 |
| ISO 9802:1996/Cor 1:2005 | 60.60 | 81.040.10 01.040.81 | ISO/TC 172/SC 3 |
| ISO 9849:2000 Optics and optical instruments -- Geodetic and surveying instruments -- Vocabulary | 90.92 | 17.180.30 01.040.17 | ISO/TC 172/SC 6 |
| ISO 10109-1:2005 Optics and photonics -- Environmental requirements -- Part 1: General overview, terms and definitions, climatic zones and their parameters | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 10109-4:2001 Optics and optical instruments -- Environmental requirements -- Part 4: Test requirements for telescopic systems | 90.60 | 37.020 | ISO/TC 172/SC 4 |
| ISO 10109-6:2005 Optics and photonics -- Environmental requirements -- Part 6: Test requirements for medical optical instruments | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 10109-7:2001 Optics and optical instruments -- Environmental requirements -- Part 7: Test requirements for optical measuring instruments | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 10109-8:2005 Optics and photonics -- Environmental requirements -- Part 8: Test requirements for extreme conditions of use | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 10109-11:2001 Optics and optical instruments -- Environmental requirements -- Part 11: Optical instruments for outdoor conditions of use | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 10109-12:2004 Optics and optical instruments -- Environmental requirements -- Part 12: Conditions of transport for optical instruments | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-1:2006 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 1: General | 90.92 | 37.020 01.100.20 | ISO/TC 172/SC 1 |
| ISO 10110-2:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 2: Material imperfections -- Stress birefringence | 90.92 | 01.100.20 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-3:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 3: Material imperfections -- Bubbles and inclusions | 90.92 | 01.100.20 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-4:1997 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 4: Material imperfections -- Inhomogeneity and striae | 90.92 | 01.100.20 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-5:2007 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 5: Surface form tolerances | 90.92 | 37.020 01.100.20 | ISO/TC 172/SC 1 |
| ISO 10110-6:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 6: Centring tolerances | 90.92 | 01.100.20 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-6:1996/Cor 1:1999 | 60.60 | 37.020 01.100.20 | ISO/TC 172/SC 1 |
| ISO 10110-7:2008 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 7: Surface imperfection tolerances | 90.92 | 37.020 01.100.20 | ISO/TC 172/SC 1 |
| ISO 10110-8:2010 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 8: Surface texture; roughness and waviness | 60.60 | 37.020 01.100.20 | ISO/TC 172/SC 1 |
| ISO 10110-9:1996 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 9: Surface treatment and coating | 90.92 | 01.100.20 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-10:2004 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 10: Table representing data of optical elements and cemented assemblies | 90.93 | 01.100.20 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-11:1996 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 11: Non-toleranced data | 90.20 | 01.100.20 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-11:1996/Cor 1:2006 | 60.60 | 37.020 01.100.20 | ISO/TC 172/SC 1 |
| ISO 10110-12:2007 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 12: Aspheric surfaces | 90.93 | 01.100.20 37.020 | ISO/TC 172/SC 1 |
| ISO 10110-14:2007 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 14: Wavefront deformation tolerance | 90.93 | 37.020 01.100.20 | ISO/TC 172/SC 1 |
| ISO 10110-17:2004 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 17: Laser irradiation damage threshold | 90.93 | 37.020 01.100.20 31.260 | ISO/TC 172/SC 1 |
| ISO 10322-1:2006 Ophthalmic optics -- Semi-finished spectacle lens blanks -- Part 1: Specifications for single-vision and multifocal lens blanks | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10322-2:2006 Ophthalmic optics -- Semi-finished spectacle lens blanks -- Part 2: Specifications for progressive power lens blanks | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10341:2012 Ophthalmic instruments -- Refractor heads | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10342:2010 Ophthalmic instruments -- Eye refractometers | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10343:2009 Ophthalmic instruments -- Ophthalmometers | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10629:1996 Raw optical glass -- Resistance to attack by aqueous alkaline solutions at 50 degrees C -- Test method and classification | 90.93 | 81.040.10 | ISO/TC 172/SC 3 |
| ISO 10685-1:2011 Ophthalmic optics -- Spectacle frames and sunglasses electronic catalogue and identification -- Part 1: Product identification and electronic catalogue product hierarchy | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10685-2:2012 Ophthalmic optics -- Spectacle frames and sunglasses electronic catalogue and identification -- Part 2: Commercial information | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10685-3:2012 Ophthalmic optics -- Spectacle frames and sunglasses electronic catalogue and identification -- Part 3: Technical information | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10934-1:2002 Optics and optical instruments -- Vocabulary for microscopy -- Part 1: Light microscopy | 90.93 | 01.040.37 37.020 | ISO/TC 172/SC 5 |
| ISO 10934-2:2007 Optics and optical instruments -- Vocabulary for microscopy -- Part 2: Advanced techniques in light microscopy | 90.93 | 37.020 01.040.37 | ISO/TC 172/SC 5 |
| ISO 10935:2009 Microscopes -- Interfacing connection type C | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO 10936-1:2000 Optics and optical instruments -- Operation microscopes -- Part 1: Requirements and test methods | 90.93 | 37.020 11.040.30 | ISO/TC 172/SC 5 |
| ISO 10936-2:2010 Optics and photonics -- Operation microscopes -- Part 2: Light hazard from operation microscopes used in ocular surgery | 60.60 | 37.020 11.040.30 | ISO/TC 172/SC 7 |
| ISO 10937:2000 Optics and optical instruments -- Microscopes -- Diameter of interchangeable eyepieces | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 10938:1998 Ophthalmic instruments -- Chart projectors | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10939:2007 Ophthalmic instruments -- Slit-lamp microscopes | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10940:2009 Ophthalmic instruments -- Fundus cameras | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10942:2006 Ophthalmic instruments -- Direct ophthalmoscopes | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10943:2011 Ophthalmic instruments -- Indirect ophthalmoscopes | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 10944:2009 Ophthalmic instruments -- Synoptophores | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11145:2006 Optics and photonics -- Lasers and laser-related equipment -- Vocabulary and symbols | 90.60 | 01.080.40 31.260 01.040.31 | ISO/TC 172/SC 9 |
| ISO 11146-1:2005 Lasers and laser-related equipment -- Test methods for laser beam widths, divergence angles and beam propagation ratios -- Part 1: Stigmatic and simple astigmatic beams | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11146-2:2005 Lasers and laser-related equipment -- Test methods for laser beam widths, divergence angles and beam propagation ratios -- Part 2: General astigmatic beams | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO/TR 11146-3:2004 Lasers and laser-related equipment -- Test methods for laser beam widths, divergence angles and beam propagation ratios -- Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO/TR 11146-3:2004/Cor 1:2005 | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11151-1:2000 Lasers and laser-related equipment -- Standard optical components -- Part 1: Components for the UV, visible and near-infrared spectral ranges | 90.92 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11151-2:2000 Lasers and laser-related equipment -- Standard optical components -- Part 2: Components for the infrared spectral range | 90.92 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11252:2004 Lasers and laser-related equipment -- Laser device -- Minimum requirements for documentation | 90.92 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11380:1994 Optics and optical instruments -- Ophthalmic optics -- Formers | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11381:1994 Optics and optical instruments -- Ophthalmic optics -- Screw threads | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11382:2010 Optics and photonics -- Optical materials and components -- Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm | 60.60 | 37.020 | ISO/TC 172/SC 3 |
| ISO 11421:1997 Optics and optical instruments -- Accuracy of optical transfer function (OTF) measurement | 90.93 | 17.180.01 | ISO/TC 172/SC 1 |
| ISO 11455:1995 Raw optical glass -- Determination of birefringence | 90.93 | 81.040.10 | ISO/TC 172/SC 3 |
| ISO 11551:2003 Optics and optical instruments -- Lasers and laser-related equipment -- Test method for absorptance of optical laser components | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO/TR 11552:1997 Lasers and laser-related equipment -- Laser materials-processing machines -- Performance specifications and benchmarks for cutting of metals | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11553-1:2005 Safety of machinery -- Laser processing machines -- Part 1: General safety requirements | 90.93 | 31.260 13.110 | ISO/TC 172/SC 9 |
| ISO 11553-2:2007 Safety of machinery -- Laser processing machines -- Part 2: Safety requirements for hand-held laser processing devices | 90.92 | 31.260 13.110 | ISO/TC 172/SC 9 |
| ISO 11553-3:2013 Safety of machinery -- Laser processing machines -- Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) | 60.60 | 31.260 13.110 | ISO/TC 172/SC 9 |
| ISO 11554:2006 Optics and photonics -- Lasers and laser-related equipment -- Test methods for laser beam power, energy and temporal characteristics | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11670:2003 Lasers and laser-related equipment -- Test methods for laser beam parameters -- Beam positional stability | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11670:2003/Cor 1:2004 | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO 11807-1:2001 Integrated optics -- Vocabulary -- Part 1: Basic terms and symbols | 90.93 | 01.040.31 31.260 | ISO/TC 172/SC 9 |
| ISO 11807-2:2001 Integrated optics -- Vocabulary -- Part 2: Terms used in classification | 90.93 | 01.040.31 31.260 | ISO/TC 172/SC 9 |
| ISO 11810-1:2005 Lasers and laser-related equipment -- Test method and classification for the laser resistance of surgical drapes and/or patient protective covers -- Part 1: Primary ignition and penetration | 90.60 | 13.340.99 31.260 11.040.30 | ISO/TC 172/SC 9 |
| ISO 11810-2:2007 Lasers and laser-related equipment -- Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers -- Part 2: Secondary ignition | 90.60 | 13.340.99 31.260 11.040.30 | ISO/TC 172/SC 9 |
| ISO 11882:1997 Optics and optical instruments -- Microscopes -- Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation) | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 11883:1997 Optics and optical instruments -- Microscopes -- Marking of stereomicroscopes | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 11884-1:2006 Optics and photonics -- Minimum requirements for stereomicroscopes -- Part 1: Stereomicroscopes for general use | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 11884-2:2007 Optics and photonics -- Minimum requirements for stereomicroscopes -- Part 2: High performance microscopes | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 11978:2000 Ophthalmic optics -- Contact lenses and contact lens care products -- Information supplied by the manufacturer | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-1:2012 Ophthalmic implants -- Intraocular lenses -- Part 1: Vocabulary | 60.60 | 11.040.70 01.040.11 | ISO/TC 172/SC 7 |
| ISO 11979-2:1999 Ophthalmic implants -- Intraocular lenses -- Part 2: Optical properties and test methods | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-2:1999/Cor 1:2003 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-3:2012 Ophthalmic implants -- Intraocular lenses -- Part 3: Mechanical properties and test methods | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-4:2008 Ophthalmic implants -- Intraocular lenses -- Part 4: Labelling and information | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-4:2008/Amd 1:2012 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-5:2006 Ophthalmic implants -- Intraocular lenses -- Part 5: Biocompatibility | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-6:2007 Ophthalmic implants -- Intraocular lenses -- Part 6: Shelf-life and transport stability | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-7:2006 Ophthalmic implants -- Intraocular lenses -- Part 7: Clinical investigations | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-7:2006/Amd 1:2012 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-8:2006 Ophthalmic implants -- Intraocular lenses -- Part 8: Fundamental requirements | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-8:2006/Amd 1:2011 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-9:2006 Ophthalmic implants -- Intraocular lenses -- Part 9: Multifocal intraocular lenses | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11979-10:2006 Ophthalmic implants -- Intraocular lenses -- Part 10: Phakic intraocular lenses | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11980:2012 Ophthalmic optics -- Contact lenses and contact lens care products -- Guidance for clinical investigations | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11981:2009 Ophthalmic optics -- Contact lenses and contact lens care products -- Determination of physical compatibility of contact lens care products with contact lenses | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11985:1997 Ophthalmic optics -- Contact lenses -- Ageing by exposure to UV and visible radiation (in vitro method) | 90.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11986:2010 Ophthalmic optics -- Contact lenses and contact lens care products -- Determination of preservative uptake and release | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11987:2012 Ophthalmic optics -- Contact lenses -- Determination of shelf-life | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 11990-1:2011 Lasers and laser-related equipment -- Determination of laser resistance of tracheal tubes -- Part 1: Tracheal tube shaft | 60.60 | 11.040.10 31.260 | ISO/TC 172/SC 9 |
| ISO 11990-2:2010 Lasers and laser-related equipment -- Determination of laser resistance of tracheal tubes -- Part 2: Tracheal tube cuffs | 60.60 | 11.040.10 31.260 | ISO/TC 172/SC 9 |
| ISO 12005:2003 Lasers and laser-related equipment -- Test methods for laser beam parameters -- Polarization | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 12123:2010 Optics and photonics -- Specification of raw optical glass | 60.60 | 81.040.10 | ISO/TC 172/SC 3 |
| ISO 12844:1999 Raw optical glass -- Grindability with diamond pellets -- Test method and classification | 90.93 | 81.040.10 | ISO/TC 172/SC 3 |
| ISO 12853:1997 Optics and optical instruments -- Microscopes -- Information provided to the user | 90.20 | 37.020 | ISO/TC 172/SC 5 |
| ISO 12858-1:1999 Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 1: Invar levelling staffs | 90.92 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 12858-2:1999 Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 2: Tripods | 90.93 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 12858-3:2005 Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 3: Tribrachs | 90.93 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 12864:1997 Ophthalmic optics -- Contact lenses -- Determination of scattered light | 90.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 12865:2006 Ophthalmic instruments -- Retinoscopes | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 12866:1999 Ophthalmic instruments -- Perimeters | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 12866:1999/Amd 1:2008 . | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 12867:2010 Ophthalmic instruments -- Trial frames | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 12870:2012 Ophthalmic optics -- Spectacle frames -- Requirements and test methods | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 13212:2011 Ophthalmic optics -- Contact lens care products -- Guidelines for determination of shelf-life | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 13653:1996 Optics and optical instruments -- General optical test methods -- Measurement of relative irradiance in the image field | 90.93 | 17.180.01 | ISO/TC 172/SC 1 |
| ISO 13666:2012 Ophthalmic optics -- Spectacle lenses -- Vocabulary | 60.60 | 01.040.11 11.040.70 | ISO/TC 172/SC 7 |
| ISO 13694:2000 Optics and optical instruments -- Lasers and laser-related equipment -- Test methods for laser beam power (energy) density distribution | 90.92 | 31.260 | ISO/TC 172/SC 9 |
| ISO 13694:2000/Cor 1:2005 | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO 13695:2004 Optics and photonics -- Lasers and laser-related equipment -- Test methods for the spectral characteristics of lasers | 90.93 | 31.260 37.020 | ISO/TC 172/SC 9 |
| ISO 13696:2002 Optics and optical instruments -- Test methods for radiation scattered by optical components | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 13697:2006 Optics and photonics -- Lasers and laser-related equipment -- Test methods for specular reflectance and regular transmittance of optical laser components | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 14132-1:2002 Optics and optical instruments -- Vocabulary for telescopic systems -- Part 1: General terms and alphabetical indexes of terms in ISO 14132 | 90.93 | 01.040.37 37.020 | ISO/TC 172/SC 4 |
| ISO 14132-2:2002 Optics and optical instruments -- Vocabulary for telescopic systems -- Part 2: Terms for binoculars, monoculars and spotting scopes | 90.92 | 01.040.37 37.020 | ISO/TC 172/SC 4 |
| ISO 14132-2:2002/Cor 1:2006 | 60.60 | 37.020 01.040.37 | ISO/TC 172/SC 4 |
| ISO 14132-3:2002 Optics and optical instruments -- Vocabulary for telescopic systems -- Part 3: Terms for telescopic sights | 90.92 | 01.040.37 37.020 | ISO/TC 172/SC 4 |
| ISO 14132-4:2002 Optics and optical instruments -- Vocabulary for telescopic systems -- Part 4: Terms for astronomical telescopes | 90.93 | 01.040.37 37.020 | ISO/TC 172/SC 4 |
| ISO 14132-5:2008 Optics and photonics -- Vocabulary for telescopic systems -- Part 5: Terms for night vision devices | 90.60 | 37.020 01.040.37 | ISO/TC 172/SC 4 |
| ISO 14133-1:2006 Optics and optical instruments -- Specifications for binoculars, monoculars and spotting scopes -- Part 1: General purpose instruments | 90.60 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14133-2:2006 Optics and optical instruments -- Specifications for binoculars, monoculars and spotting scopes -- Part 2: High performance instruments | 90.60 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14134:2006 Optics and optical instruments -- Specifications for astronomical telescopes | 90.60 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14135-1:2003 Optics and optical instruments -- Specifications for telescopic sights -- Part 1: General-purpose instruments | 90.92 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14135-2:2003 Optics and optical instruments -- Specifications for telescopic sights -- Part 2: High-performance instruments | 90.92 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14490-1:2005 Optics and optical instruments -- Test methods for telescopic systems -- Part 1: Test methods for basic characteristics | 90.93 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14490-2:2005 Optics and optical instruments -- Test methods for telescopic systems -- Part 2: Test methods for binocular systems | 90.93 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14490-3:2004 Optics and optical instruments -- Test methods for telescopic systems -- Part 3: Test methods for telescopic sights | 90.92 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14490-4:2005 Optics and optical instruments -- Test methods for telescopic systems -- Part 4: Test methods for astronomical telescopes | 90.93 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14490-5:2005 Optics and optical instruments -- Test methods for telescopic systems -- Part 5: Test methods for transmittance | 90.92 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14490-6:2005 Optics and optical instruments -- Test methods for telescopic systems -- Part 6: Test methods for veiling glare index | 90.93 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14490-7:2005 Optics and optical instruments -- Test methods for telescopic systems -- Part 7: Test methods for limit of resolution | 90.93 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14490-8:2011 Optics and optical instruments -- Test methods for telescopic systems -- Part 8: Test methods for night-vision devices | 60.60 | 37.020 | ISO/TC 172/SC 4 |
| ISO 14534:2011 Ophthalmic optics -- Contact lenses and contact lens care products -- Fundamental requirements | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 14729:2001 Ophthalmic optics -- Contact lens care products -- Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 14729:2001/Amd 1:2010 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 14730:2000 Ophthalmic optics -- Contact lens care products -- Antimicrobial preservative efficacy testing and guidance on determining discard date | 90.20 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 14880-1:2001 Optics and photonics -- Microlens arrays -- Part 1: Vocabulary | 90.92 | 01.040.31 31.260 | ISO/TC 172/SC 9 |
| ISO 14880-1:2001/Cor 1:2003 | 60.60 | 31.260 01.040.31 | ISO/TC 172/SC 9 |
| ISO 14880-1:2001/Cor 2:2005 | 60.60 | 31.260 01.040.31 | ISO/TC 172/SC 9 |
| ISO 14880-2:2006 Optics and photonics -- Microlens arrays -- Part 2: Test methods for wavefront aberrations | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 14880-3:2006 Optics and photonics -- Microlens arrays -- Part 3: Test methods for optical properties other than wavefront aberrations | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 14880-4:2006 Optics and photonics -- Microlens arrays -- Part 4: Test methods for geometrical properties | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO/TR 14880-5:2010 Optics and photonics -- Microlens arrays -- Part 5: Guidance on testing | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO 14881:2001 Integrated optics -- Interfaces -- Parameters relevant to coupling properties | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 14889:2003 Ophthalmic optics -- Spectacle lenses -- Fundamental requirements for uncut finished lenses | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 14997:2011 Optics and photonics -- Test methods for surface imperfections of optical elements | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO/TR 14999-1:2005 Optics and photonics -- Interferometric measurement of optical elements and optical systems -- Part 1: Terms, definitions and fundamental relationships | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO/TR 14999-2:2005 Optics and photonics -- Interferometric measurement of optical elements and optical systems -- Part 2: Measurement and evaluation techniques | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO/TR 14999-3:2005 Optics and photonics -- Interferometric measurement of optical elements and optical systems -- Part 3: Calibration and validation of interferometric test equipment and measurements | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO 14999-4:2007 Optics and photonics -- Interferometric measurement of optical elements and optical systems -- Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 | 90.92 | 37.020 | ISO/TC 172/SC 1 |
| ISO 15004-1:2006 Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 15004-2:2007 Ophthalmic instruments -- Fundamental requirements and test methods -- Part 2: Light hazard protection | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 15227:2000 Optics and optical instruments -- Microscopes -- Testing of stereomicroscopes | 90.93 | 37.020 | ISO/TC 172/SC 5 |
| ISO 15253:2000 Ophthalmic optics and instruments -- Optical devices for enhancing low vision | 90.20 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 15254:2009 Ophthalmic optics and instruments -- Electro-optical devices for enhancing low vision | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 15362:1998 Optics and optical instruments -- Stereomicroscopes -- Information provided to the user | 90.20 | 37.020 | ISO/TC 172/SC 5 |
| ISO 15367-1:2003 Lasers and laser-related equipment -- Test methods for determination of the shape of a laser beam wavefront -- Part 1: Terminology and fundamental aspects | 90.93 | 31.260 01.040.31 | ISO/TC 172/SC 9 |
| ISO 15367-2:2005 Lasers and laser-related equipment -- Test methods for determination of the shape of a laser beam wavefront -- Part 2: Shack-Hartmann sensors | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 15368:2001 Optics and optical instruments -- Measurement of reflectance of plane surfaces and transmittance of plane parallel elements | 90.93 | 17.180.01 | ISO/TC 172/SC 1 |
| ISO 15529:2010 Optics and photonics -- Optical transfer function -- Principles of measurement of modulation transfer function (MTF) of sampled imaging systems | 60.60 | 17.180.01 | ISO/TC 172/SC 1 |
| ISO 15752:2010 Ophthalmic instruments -- Endoilluminators -- Fundamental requirements and test methods for optical radiation safety | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 15795:2002 Optics and optical instruments -- Quality evaluation of optical systems -- Assessing the image quality degradation due to chromatic aberrations | 90.93 | 37.020 | ISO/TC 172/SC 1 |
| ISO 15795:2002/Cor 1:2007 | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO 15798:2010 Ophthalmic implants -- Ophthalmic viscosurgical devices | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 15902:2004 Optics and photonics -- Diffractive optics -- Vocabulary | 90.60 | 31.260 01.040.31 | ISO/TC 172/SC 9 |
| ISO 15902:2004/Cor 1:2005 | 60.60 | 31.260 01.040.31 | ISO/TC 172/SC 9 |
| ISO 16034:2002 Ophthalmic optics -- Specifications for single-vision ready-to-wear near- vision spectacles | 90.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 16034:2002/Cor 1:2006 | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 16284:2006 Ophthalmic optics -- Information interchange for ophthalmic optical equipment | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 16331-1:2012 Optics and optical instruments -- Laboratory procedures for testing surveying and construction instruments -- Part 1: Performance of handheld laser distance meters | 60.60 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 16671:2003 Ophthalmic implants -- Irrigating solutions for ophthalmic surgery | 90.20 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 16672:2003 Ophthalmic implants -- Ocular endotamponades | 90.20 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO/TR 16743:2013 Optics and photonics -- Wavefront sensors for characterising optical systems and optical components | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO 17123-1:2010 Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 1: Theory | 60.60 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 17123-2:2001 Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 2: Levels | 90.93 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 17123-3:2001 Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 3: Theodolites | 90.93 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 17123-4:2012 Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM measurements to reflectors) | 60.60 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 17123-5:2012 Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 5: Total stations | 60.60 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 17123-6:2012 Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 6: Rotating lasers | 60.60 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 17123-7:2005 Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 7: Optical plumbing instruments | 90.93 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 17123-8:2007 Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 8: GNSS field measurement systems in real-time kinematic (RTK) | 90.92 | 17.180.30 | ISO/TC 172/SC 6 |
| ISO 17526:2003 Optics and optical instruments -- Lasers and laser-related equipment -- Lifetime of lasers | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 18369-1:2006 Ophthalmic optics -- Contact lenses -- Part 1: Vocabulary, classification system and recommendations for labelling specifications | 90.93 | 11.040.70 01.040.11 | ISO/TC 172/SC 7 |
| ISO 18369-1:2006/Amd 1:2009 | 60.60 | 01.040.11 11.040.70 | ISO/TC 172/SC 7 |
| ISO 18369-2:2012 Ophthalmic optics -- Contact lenses -- Part 2: Tolerances | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 18369-3:2006 Ophthalmic optics -- Contact lenses -- Part 3: Measurement methods | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 18369-4:2006 Ophthalmic optics -- Contact lenses -- Part 4: Physicochemical properties of contact lens materials | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 19012-1:2013 Microscopes -- Designation of microscope objectives -- Part 1: Flatness of field/Plan | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO 19012-2:2013 Microscopes -- Designation of microscope objectives -- Part 2: Chromatic correction | 60.60 | 37.020 | ISO/TC 172/SC 5 |
| ISO/TS 19979:2004 Ophthalmic optics -- Contact lenses -- Hygienic management of multipatient use trial contact lenses | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 19980:2012 Ophthalmic instruments -- Corneal topographers | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 20473:2007 Optics and photonics -- Spectral bands | 90.60 | 37.020 | ISO/TC 172 |
| ISO/TR 20824:2007 Ophthalmic instruments -- Background for light hazard specification in ophthalmic instrument standards | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 21094:2008 Optics and photonics -- Telescopic systems -- Specifications for night vision devices | 90.60 | 37.020 | ISO/TC 172/SC 4 |
| ISO 21254-1:2011 Lasers and laser-related equipment -- Test methods for laser-induced damage threshold -- Part 1: Definitions and general principles | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO 21254-2:2011 Lasers and laser-related equipment -- Test methods for laser-induced damage threshold -- Part 2: Threshold determination | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO 21254-3:2011 Lasers and laser-related equipment -- Test methods for laser-induced damage threshold -- Part 3: Assurance of laser power (energy) handling capabilities | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO/TR 21254-4:2011 Lasers and laser-related equipment -- Test methods for laser-induced damage threshold -- Part 4: Inspection, detection and measurement | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO 21987:2009 Ophthalmic optics -- Mounted spectacle lenses | 90.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO/TR 22588:2005 Optics and photonics -- Lasers and laser-related equipment -- Measurement and evaluation of absorption-induced effects in laser optical components | 60.60 | 31.260 | ISO/TC 172/SC 9 |
| ISO 22665:2012 Ophthalmic optics and instruments - Instruments to measure axial distances in the eye | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO/TR 22979:2006 Ophthalmic implants -- Intraocular lenses -- Guidance on assessment of the need for clinical investigation of intraocular lens design modifications | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 23584-1:2009 Optics and photonics -- Specification of reference dictionary -- Part 1: General overview on organization and structure | 60.60 | 37.020 | ISO/TC 172 |
| ISO 23584-2:2012 Optics and photonics -- Specification of reference dictionary -- Part 2: Classes' and properties' definitions | 60.60 | 37.020 | ISO/TC 172 |
| ISO 24013:2006 Optics and photonics -- Lasers and laser-related equipment -- Measurement of phase retardation of optical components for polarized laser radiation | 90.93 | 31.260 | ISO/TC 172/SC 9 |
| ISO 24157:2008 Ophthalmic optics and instruments -- Reporting aberrations of the human eye | 90.93 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO/TS 24348:2007 Ophthalmic optics -- Spectacle frames -- Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
| ISO 25297-1:2012 Optics and photonics -- Electronic exchange of optical data -- Part 1: NODIF information model | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO 25297-2:2011 Optics and photonics -- Electronic exchange of optical data -- Part 2: Mapping to the classes and properties defined in ISO 23584 | 60.60 | 37.020 | ISO/TC 172/SC 1 |
| ISO/TR 28980:2007 Ophthalmic optics -- Spectacle lenses -- Parameters affecting lens power measurement | 60.60 | 11.040.70 | ISO/TC 172/SC 7 |
| IEC 80601-2-58:2008 Medical electrical equipment -- Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery | 90.92 | 11.040.70 | ISO/TC 172/SC 7 |
