Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 7438:2005 Metallic materials -- Bend test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 7799:1985 Metallic materials -- Sheet and strip 3 mm thick or less -- Reverse bend test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 7800:2012 Metallic materials -- Wire -- Simple torsion test | 60.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 7801:1984 Metallic materials -- Wire -- Reverse bend test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 7802:1983 Metallic materials -- Wire -- Wrapping test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8491:1998 Metallic materials -- Tube (in full section) -- Bend test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8492:1998 Metallic materials -- Tube -- Flattening test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8493:1998 Metallic materials -- Tube -- Drift-expanding test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8494:1998 Metallic materials -- Tube -- Flanging test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8495:1998 Metallic materials -- Tube -- Ring-expanding test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8496:1998 Metallic materials -- Tube -- Ring tensile test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 9649:1990 Metallic materials -- Wire -- Reverse torsion test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 10113:2006 Metallic materials -- Sheet and strip -- Determination of plastic strain ratio | 90.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 10275:2007 Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent | 90.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 11531:1994 Metallic materials -- Earing test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 12004-1:2008 Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 1: Measurement and application of forming-limit diagrams in the press shop | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 12004-2:2008 Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 2: Determination of forming-limit curves in the laboratory | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 13314:2011 Mechanical testing of metals -- Ductility testing -- Compression test for porous and cellular metals | 60.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO/TR 14936:1998 Metallic materials -- Strain analysis report | 90.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 15363:2000 Metallic materials -- Tube ring hydraulic pressure test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 16630:2009 Metallic materials -- Sheet and strip -- Hole expanding test | 60.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 20032:2007 Method for evaluation of tensile properties of metallic superplastic materials | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 20482:2003 Metallic materials -- Sheet and strip -- Erichsen cupping test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 24213:2008 Metallic materials -- Sheet and strip -- Method for springback evaluation in stretch bending | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
