Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals | 90.60 | 23.040.45 23.040.20 |
| ISO 7509:2000 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | 90.92 | 23.040.20 |
| ISO/DIS 7509 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | 40.20 | 23.040.20 |
| ISO 7510:1997 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method | 90.20 | 23.040.45 23.040.20 |
| ISO 7511:1999 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure | 90.93 | 23.040.45 23.040.20 |
| ISO 7684:1997 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions | 90.20 | 23.040.20 |
| ISO 7685:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness | 90.93 | 23.040.20 |
| ISO 8483:2003 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of bolted flange joints | 90.93 | 23.040.20 23.040.45 |
| ISO 8483:2003/Amd 1:2012 | 60.60 | 23.040.45 23.040.20 |
| ISO/DIS 8513 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial longitudinal tensile strength | 40.60 | 23.040.20 |
| ISO 8513:2000 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of longitudinal tensile properties | 90.92 | 23.040.20 |
| ISO 8521:2009 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength | 60.60 | 23.040.20 |
| ISO 8533:2003 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints | 90.93 | 23.040.20 23.040.45 |
| ISO 8533:2003/Amd 1:2012 | 60.60 | 23.040.20 23.040.45 |
| ISO 8639:2000 Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness of flexible joints | 90.92 | 23.040.60 |
| ISO/TS 10465-1:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 1: Installation procedures | 90.93 | 23.040.01 |
| ISO/TR 10465-2:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 2: Comparison of static calculation methods | 90.93 | 23.040.01 |
| ISO/TR 10465-3:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 3: Installation parameters and application limits | 90.93 | 23.040.01 |
| ISO 10466:1997 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection | 90.93 | 23.040.20 |
| ISO 10467:2004 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 90.60 | 23.040.20 91.140.80 93.030 |
| ISO 10467:2004/Amd 1:2012 | 60.60 | 23.040.20 91.140.80 93.030 |
| ISO 10468:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor | 90.93 | 23.040.20 |
| ISO 10468:2003/Amd 1:2010 | 60.60 | 23.040.20 |
| ISO 10471:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions | 90.93 | 23.040.20 |
| ISO 10471:2003/Amd 1:2010 | 60.60 | 23.040.20 |
| ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 90.60 | 23.040.20 91.140.60 93.025 |
| ISO 10639:2004/Amd 1:2011 | 60.60 | 23.040.20 91.140.60 93.025 |
| ISO 10928:2009 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use | 60.60 | 23.040.45 23.040.20 |
| ISO 10928:2009/Amd 1:2013 | 60.60 | 23.040.20 23.040.45 |
| ISO 10952:2008 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | 90.92 | 23.040.45 23.040.20 |
| ISO/DIS 10952 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | 40.00 | 23.040.45 23.040.20 |
| ISO/DTR 10986 Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 30.99 | 23.040.45 23.040.20 |
| ISO/DIS 12512 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe | 40.00 | 23.040.20 |
| ISO 14828:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor | 90.93 | 23.040.20 |
| ISO 14828:2003/Amd 1:2010 | 60.60 | 23.040.20 |
| ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure | 90.93 | 23.040.45 23.040.20 |
| ISO 15306:2003/Amd 1:2012 | 60.60 | 23.040.45 23.040.20 |
| ISO/WD 16611 Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests | 20.99 | 23.040.20 91.140.80 93.030 23.040.45 |
| ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 |
| ISO/CD 18851 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test method to prove the structural design of fittings | 30.20 | 23.040.20 |
| ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques | 60.60 | 93.030 91.140.80 91.140.60 23.040.20 |
