Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 580:2005 Plastics piping and ducting systems -- Injection-moulded thermoplastics fittings -- Methods for visually assessing the effects of heating | 90.20 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces | 90.93 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components | 90.93 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 2505:2005 Thermoplastics pipes -- Longitudinal reversion -- Test method and parameters | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 2507-1:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 2507-2:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 2507-3:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method | 90.93 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 5 |
| ISO 3126:2005 Plastics piping systems -- Plastics components -- Determination of dimensions | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 3127:1994 Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 3213:2009 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 4059:1978 Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 6259-1:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 6259-2:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 6259-3:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 6964:1986 Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 7387-1:1983 Adhesives with solvents for assembly of PVC-U pipe elements -- Characterization -- Part 1: Basic test methods | 90.93 | 83.180 | ISO/TC 138/SC 5 |
| ISO 7686:2005 Plastics pipes and fittings -- Determination of opacity | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 8361-1:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 8361-2:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 8361-3:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints | 90.93 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 5 |
| ISO 9080:2012 Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9311-1:2005 Adhesives for thermoplastic piping systems -- Part 1: Determination of film properties | 90.93 | 83.180 23.040.01 | ISO/TC 138/SC 5 |
| ISO 9311-2:2011 Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength | 60.60 | 83.180 23.040.01 | ISO/TC 138/SC 5 |
| ISO 9311-3:2005 Adhesives for thermoplastic piping systems -- Part 3: Test method for the determination of resistance to internal pressure | 90.93 | 23.040.01 83.180 | ISO/TC 138/SC 5 |
| ISO 9852:2007 Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test | 90.93 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 9854-1:1994 Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9854-2:1994 Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 2: Test conditions for pipes of various materials | 90.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9967:2007 Thermoplastics pipes -- Determination of creep ratio | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9969:2007 Thermoplastics pipes -- Determination of ring stiffness | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 10146:1997 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 11173:1994 Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 11413:2008 Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting | 90.93 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 11414:2009 Plastics pipes and fittings -- Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion | 60.60 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 12091:1995 Structured-wall thermoplastics pipes -- Oven test | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient | 60.60 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 12230:2012 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13056:2011 Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum | 60.60 | 91.140.60 23.040.01 | ISO/TC 138/SC 5 |
| ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Small-scale steady-state test (S4 test) | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Full-scale test (FST) | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13479:2009 Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13480:1997 Polyethylene pipes -- Resistance to slow crack growth -- Cone test method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13760:1998 Plastics pipes for the conveyance of fluids under pressure -- Miner's rule -- Calculation method for cumulative damage | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13761:1996 Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C | 90.92 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 13924:2000 Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles | 90.93 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 13951:2001 Plastics piping systems -- Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading | 90.92 | 23.040.01 | ISO/TC 138/SC 5 |
| ISO 13953:2001 Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint | 90.93 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 13954:1997 Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm | 90.93 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 13955:1997 Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies | 90.93 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 13956:2010 Plastics pipes and fittings -- Decohesion test of polyethylene (PE) saddle fusion joints -- Evaluation of ductility of fusion joint interface by tear test | 60.60 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 13957:1997 Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance | 90.93 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 13967:2009 Thermoplastics fittings -- Determination of ring stiffness | 60.60 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 13968:2008 Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 15853:1999 Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding | 90.93 | 23.040.01 83.080.20 | ISO/TC 138/SC 5 |
| ISO 15908:2002 Adhesives for thermoplastic piping systems -- Test method for the determination of thermal stability of adhesives | 90.20 | 83.180 | ISO/TC 138/SC 5 |
| ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO/TS 16479:2012 Thermoplastics pipes for the conveyance of fluids -- Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT) | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 16871:2003 Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO/TR 16913:1999 Plastics pipes and fittings -- Definitions of types of test | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 17454:2006 Plastics piping systems -- Multilayer pipes -- Test method for the adhesion of the different layers using a pulling rig | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 17455:2005 Plastics piping systems -- Multilayer pipes -- Determination of the oxygen permeability of the barrier pipe | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 17455:2005/Cor 1:2007 | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 17456:2006 Plastics piping systems -- Multilayer pipes -- Determination of long-term strength | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO/TR 18124:2006 Plastics piping systems -- Multilayer M (metal) pipes -- Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 18373-1:2007 Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 1: Measurement of the processing temperature | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 18373-2:2008 Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 2: Measurement of the enthalpy of fusion of crystallites | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds | 90.60 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 18553:2002/Amd 1:2007 | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 19892:2011 Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of joints to pressure cycling | 60.60 | 23.040.60 83.080.20 | ISO/TC 138/SC 5 |
| ISO 19893:2011 Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of mounted assemblies to temperature cycling | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 19899:2010 Plastics piping systems -- Polyolefin pipes and mechanical fitting assemblies -- Test method for the resistance to end load (AREL test) | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO/TS 19911:2010 Plastics pipes and fittings -- Format of a technical file for characterizing PE spigot end fittings | 60.60 | 23.040.60 23.040.45 | ISO/TC 138/SC 5 |
| ISO 21751:2011 Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 23228:2011 Thermoplastics pipes for the conveyance of fluids -- Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes -- Effect of time and temperature on the expected strength | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO/TS 26873:2010 Plastics pipes and fittings -- Definition and construction procedures for reference lines | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
