Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 1: Metric series | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 2: Inch-based series | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General | 60.60 | 93.025 23.040.20 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 3458:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of leakproofness under internal pressure | 90.92 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 3459:1976 Polyethylene (PE) pressure pipes -- Joints assembled with mechanical fittings -- Internal under-pressure test method and requirement | 90.92 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 3501:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of resistance to pull out | 90.92 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 3503:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of leakproofness under internal pressure when subjected to bending | 90.92 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO/TR 4191:1989 Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying | 90.93 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General | 90.93 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007/Cor 1:2008 | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-2:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes | 90.93 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-3:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings | 90.93 | 23.040.45 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-5:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system | 90.93 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 8779:2010 Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications | 60.60 | 23.040.20 65.060.35 | ISO/TC 138/SC 2 |
| ISO 8796:2004 Polyethylene PE 32 and PE 40 pipes for irrigation laterals -- Susceptibility to environmental stress cracking induced by insert-type fittings -- Test method and requirements | 90.93 | 23.040.20 65.060.35 | ISO/TC 138/SC 2 |
| ISO 9623:1997 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO 9624:1997 Thermoplastics pipes for fluids under pressure -- Mating dimensions of flange adapters and loose backing flanges | 90.93 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO/TR 10501:1993 Thermoplastics pipes for the transport of liquids under pressure -- Calculation of head losses | 90.93 | 23.040.20 | ISO/TC 138/SC 2 |
| ISO 10508:2006 Plastics piping systems for hot and cold water installations -- Guidance for classification and design | 90.93 | 91.140.60 23.040.45 23.040.20 | ISO/TC 138/SC 2 |
| ISO 13783:1997 Plastics piping systems -- Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints -- Test method for leaktightness and strength while subjected to bending and internal pressure | 90.93 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 13844:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 13845:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection | 90.92 | 23.040.01 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 13846:2000 Plastics piping systems -- End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping -- Test method for long-term leaktightness under internal water pressure | 90.93 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 14236:2000 Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems | 90.93 | 23.040.20 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15874-1:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General | 60.60 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15874-2:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes | 60.60 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15874-3:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings | 60.60 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15874-5:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system | 60.60 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 7: Guidance for the assessment of conformity | 90.92 | 23.040.01 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-1:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 1: General | 90.93 | 23.040.01 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-1:2003/Amd 1:2007 | 60.60 | 91.140.60 23.040.01 | ISO/TC 138/SC 2 |
| ISO 15875-2:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes | 90.93 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-2:2003/Amd 1:2007 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15875-3:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings | 90.93 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-5:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system | 90.93 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-5:2003/Cor 1:2007 | 60.60 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15876-1:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 1: General | 90.92 | 23.040.01 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15876-1:2003/Amd 1:2007 | 60.60 | 91.140.60 23.040.01 | ISO/TC 138/SC 2 |
| ISO 15876-2:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15876-2:2003/Amd 1:2007 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15876-3:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings | 90.92 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15876-5:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15877-1:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-1:2009/Amd 1:2010 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-2:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-2:2009/Amd 1:2010 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-3:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings | 60.60 | 91.140.60 23.040.45 | ISO/TC 138/SC 2 |
| ISO 15877-3:2009/Amd 1:2010 | 60.60 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15877-5:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-5:2009/Amd 1:2010 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity | 90.92 | 91.140.60 23.040.20 23.040.01 | ISO/TC 138/SC 2 |
| ISO 16422:2006 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications | 90.92 | 23.040.20 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 1: General | 90.93 | 91.140.60 23.040.01 | ISO/TC 138/SC 2 |
| ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes | 90.93 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 21003-2:2008/Amd 1:2011 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings | 90.93 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 21003-5:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 5: Fitness for purpose of the system | 90.93 | 23.040.01 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity | 90.92 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO/TS 21003-7:2008/Amd 1:2010 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 21004:2006 Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply | 90.93 | 23.040.45 23.040.20 93.025 | ISO/TC 138/SC 2 |
| ISO 22391-1:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General | 60.60 | 23.040.01 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 22391-2:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes | 60.60 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 22391-3:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings | 60.60 | 23.040.45 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 22391-5:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system | 60.60 | 23.040.01 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 7: Guidance for the assessment of conformity | 60.60 | 23.040.01 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
