Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 161-1:1996 Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series | 90.60 | 23.040.20 | ISO/TC 138 |
| ISO 161-2:1996 Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch-based series | 90.60 | 23.040.20 | ISO/TC 138 |
| ISO 265-1:1988 Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) | 90.93 | 23.040.20 23.040.45 91.140.80 | ISO/TC 138/SC 1 |
| ISO 580:2005 Plastics piping and ducting systems -- Injection-moulded thermoplastics fittings -- Methods for visually assessing the effects of heating | 90.20 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 1: Metric series | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 2: Inch-based series | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces | 90.93 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components | 90.93 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General | 60.60 | 93.025 23.040.20 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 2505:2005 Thermoplastics pipes -- Longitudinal reversion -- Test method and parameters | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 2507-1:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 2507-2:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 2507-3:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method | 90.93 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 5 |
| ISO 3126:2005 Plastics piping systems -- Plastics components -- Determination of dimensions | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 3127:1994 Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 3213:2009 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 3458:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of leakproofness under internal pressure | 90.92 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 3459:1976 Polyethylene (PE) pressure pipes -- Joints assembled with mechanical fittings -- Internal under-pressure test method and requirement | 90.92 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 3501:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of resistance to pull out | 90.92 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 3503:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of leakproofness under internal pressure when subjected to bending | 90.92 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Unplasticized poly(vinyl chloride) (PVC-U) | 90.60 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 4059:1978 Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 4065:1996 Thermoplastics pipes -- Universal wall thickness table | 90.60 | 23.040.20 | ISO/TC 138 |
| ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO/TR 4191:1989 Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying | 90.93 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General | 90.93 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007/Cor 1:2008 | 60.60 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-2:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes | 90.93 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-3:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings | 90.93 | 23.040.45 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4427-5:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system | 90.93 | 23.040.45 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 4433-1:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method | 90.20 | 23.040.20 | ISO/TC 138/SC 3 |
| ISO 4433-2:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 2: Polyolefin pipes | 90.20 | 23.040.20 | ISO/TC 138/SC 3 |
| ISO 4433-3:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes | 90.20 | 23.040.20 | ISO/TC 138/SC 3 |
| ISO 4433-4:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 4: Poly(vinylidene fluoride) (PVDF) pipes | 90.20 | 23.040.20 | ISO/TC 138/SC 3 |
| ISO 4435:2003 Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U) | 90.93 | 23.040.20 93.030 | ISO/TC 138/SC 1 |
| ISO 4437:2007 Buried polyethylene (PE) pipes for the supply of gaseous fuels -- Metric series -- Specifications | 90.92 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 6259-1:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 6259-2:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 6259-3:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 6964:1986 Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 6993-1:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) | 90.93 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO 6993-2:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) | 90.93 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO 6993-3:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) | 90.93 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO 6993-4:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 4: Code of practice for design, handling and installation | 90.93 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation | 90.92 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO/TR 7073:1988 Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers | 90.93 | 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO/TR 7074:1986 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage | 90.93 | 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 7387-1:1983 Adhesives with solvents for assembly of PVC-U pipe elements -- Characterization -- Part 1: Basic test methods | 90.93 | 83.180 | ISO/TC 138/SC 5 |
| ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals | 90.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 6 |
| ISO 7509:2000 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | 90.92 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 7510:1997 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method | 90.20 | 23.040.20 23.040.45 | ISO/TC 138/SC 6 |
| ISO 7511:1999 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 6 |
| ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polypropylene (PP) | 90.93 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 7675:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Chlorinated poly(vinyl chloride) (PVC-C) | 90.93 | 91.140.80 23.040.20 | ISO/TC 138/SC 1 |
| ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS) | 90.93 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 7684:1997 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions | 90.20 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 7685:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness | 90.93 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 7686:2005 Plastics pipes and fittings -- Determination of opacity | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 8085-1:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 1: Fittings for socket fusion using heated tools | 90.92 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO 8085-1:2001/Cor 1:2008 | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 8085-2:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings | 90.92 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO 8085-2:2001/Cor 1:2001 | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 8085-2:2001/Cor 2:2008 | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 8085-3:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 3: Electrofusion fittings | 90.92 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO 8085-3:2001/Cor 1:2007 | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 8085-3:2001/Cor 2:2008 | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 8233:1988 Thermoplastics valves -- Torque -- Test method | 90.60 | 23.060.01 83.140.30 | ISO/TC 138/SC 7 |
| ISO 8283-1:1991 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) | 90.93 | 23.040.45 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 8283-2:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE) | 90.93 | 23.040.45 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 8283-3:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP) | 90.93 | 23.040.45 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 8283-4:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS) | 90.20 | 23.040.20 23.040.45 91.140.80 | ISO/TC 138/SC 1 |
| ISO 8361-1:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 8361-2:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 8361-3:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 8483:2003 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of bolted flange joints | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 6 |
| ISO 8483:2003/Amd 1:2012 | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 6 |
| ISO 8513:2000 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of longitudinal tensile properties | 90.92 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 8521:2009 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength | 60.60 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 8533:2003 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 6 |
| ISO 8533:2003/Amd 1:2012 | 60.60 | 23.040.20 23.040.45 | ISO/TC 138/SC 6 |
| ISO 8639:2000 Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness of flexible joints | 90.92 | 23.040.60 | ISO/TC 138/SC 6 |
| ISO 8659:1989 Thermoplastics valves -- Fatigue strength -- Test method | 90.93 | 83.140.30 23.060.01 | ISO/TC 138/SC 7 |
| ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE) | 90.93 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) | 90.93 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) | 90.93 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 8779:2010 Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications | 60.60 | 23.040.20 65.060.35 | ISO/TC 138/SC 2 |
| ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints | 90.93 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 5 |
| ISO 8796:2004 Polyethylene PE 32 and PE 40 pipes for irrigation laterals -- Susceptibility to environmental stress cracking induced by insert-type fittings -- Test method and requirements | 90.93 | 23.040.20 65.060.35 | ISO/TC 138/SC 2 |
| ISO 9080:2012 Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9311-1:2005 Adhesives for thermoplastic piping systems -- Part 1: Determination of film properties | 90.93 | 83.180 23.040.01 | ISO/TC 138/SC 5 |
| ISO 9311-2:2011 Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength | 60.60 | 83.180 23.040.01 | ISO/TC 138/SC 5 |
| ISO 9311-3:2005 Adhesives for thermoplastic piping systems -- Part 3: Test method for the determination of resistance to internal pressure | 90.93 | 23.040.01 83.180 | ISO/TC 138/SC 5 |
| ISO 9393-1:2004 Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General | 90.60 | 23.060.01 83.140.30 | ISO/TC 138/SC 7 |
| ISO 9393-2:2005 Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements | 90.93 | 23.060.01 83.140.30 | ISO/TC 138/SC 7 |
| ISO 9623:1997 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series | 90.93 | 23.040.45 | ISO/TC 138/SC 2 |
| ISO 9624:1997 Thermoplastics pipes for fluids under pressure -- Mating dimensions of flange adapters and loose backing flanges | 90.93 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 9852:2007 Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test | 90.93 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 9854-1:1994 Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9854-2:1994 Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 2: Test conditions for pipes of various materials | 90.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9896:1996 Plastics traps for discharge pipework systems inside buildings | 90.93 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 9967:2007 Thermoplastics pipes -- Determination of creep ratio | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 9969:2007 Thermoplastics pipes -- Determination of ring stiffness | 90.92 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 10146:1997 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO/TR 10358:1993 Plastics pipes and fittings -- Combined chemical-resistance classification table | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 3 |
| ISO/TS 10465-1:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 1: Installation procedures | 90.93 | 23.040.01 | ISO/TC 138/SC 6 |
| ISO/TR 10465-2:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 2: Comparison of static calculation methods | 90.93 | 23.040.01 | ISO/TC 138/SC 6 |
| ISO/TR 10465-3:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 3: Installation parameters and application limits | 90.93 | 23.040.01 | ISO/TC 138/SC 6 |
| ISO 10466:1997 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection | 90.93 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 10467:2004 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 90.20 | 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 6 |
| ISO 10467:2004/Amd 1:2012 | 60.60 | 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 6 |
| ISO 10468:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor | 90.93 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 10468:2003/Amd 1:2010 | 60.60 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 10471:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions | 90.93 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 10471:2003/Amd 1:2010 | 60.60 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO/TR 10501:1993 Thermoplastics pipes for the transport of liquids under pressure -- Calculation of head losses | 90.93 | 23.040.20 | ISO/TC 138/SC 2 |
| ISO 10508:2006 Plastics piping systems for hot and cold water installations -- Guidance for classification and design | 90.93 | 91.140.60 23.040.45 23.040.20 | ISO/TC 138/SC 2 |
| ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 90.20 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 6 |
| ISO 10639:2004/Amd 1:2011 | 60.60 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 6 |
| ISO 10838-1:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm | 90.93 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO 10838-2:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm | 90.93 | 75.200 | ISO/TC 138/SC 4 |
| ISO 10838-3:2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm | 90.93 | 75.200 83.140.30 | ISO/TC 138/SC 4 |
| ISO/TS 10839:2000 Polyethylene pipes and fittings for the supply of gaseous fuels -- Code of practice for design, handling and installation | 90.93 | 75.200 | ISO/TC 138/SC 4 |
| ISO 10928:2009 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 6 |
| ISO 10931:2005 Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Specifications for components and the system | 90.93 | 23.040.01 | ISO/TC 138/SC 3 |
| ISO 10933:1997 Polyethylene (PE) valves for gas distribution systems | 90.92 | 75.200 83.140.30 | ISO/TC 138/SC 7 |
| ISO 10952:2008 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | 90.92 | 23.040.45 23.040.20 | ISO/TC 138/SC 6 |
| ISO 11173:1994 Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 11295:2010 Classification and information on design of plastics piping systems used for renovation | 60.60 | 23.040.01 | ISO/TC 138 |
| ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General | 60.60 | 93.030 23.040.20 23.040.45 91.140.80 | ISO/TC 138 |
| ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes | 60.60 | 93.030 91.140.80 23.040.20 23.040.45 | ISO/TC 138 |
| ISO 11296-3:2009/Cor 1:2011 | 60.60 | 93.030 91.140.80 23.040.20 23.040.45 | ISO/TC 138 |
| ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes | 60.60 | 93.030 91.140.80 23.040.20 23.040.45 | ISO/TC 138 |
| ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes | 60.60 | 93.030 91.140.80 23.040.20 23.040.45 | ISO/TC 138 |
| ISO 11297-1:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138 |
| ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks -- Part 1: General | 60.60 | 93.025 23.040.45 23.040.20 | ISO/TC 138 |
| ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes | 60.60 | 93.025 23.040.45 23.040.20 | ISO/TC 138 |
| ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks -- Part 1: General | 60.60 | 75.200 23.040.45 23.040.20 | ISO/TC 138 |
| ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks -- Part 3: Lining with close-fit pipes | 60.60 | 75.200 23.040.45 23.040.20 | ISO/TC 138 |
| ISO 11413:2008 Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting | 90.93 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 11414:2009 Plastics pipes and fittings -- Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion | 60.60 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 11922-1:1997 Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series | 90.60 | 23.040.20 | ISO/TC 138 |
| ISO 11922-2:1997 Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series | 90.60 | 23.040.20 | ISO/TC 138 |
| ISO 12091:1995 Structured-wall thermoplastics pipes -- Oven test | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient | 60.60 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 12176-1:2012 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion | 60.60 | 75.200 23.040.20 23.040.45 | ISO/TC 138/SC 4 |
| ISO 12176-2:2008 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion | 90.93 | 23.040.45 23.040.20 75.200 | ISO/TC 138/SC 4 |
| ISO 12176-3:2011 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge | 60.60 | 75.200 35.240.15 23.040.45 23.040.20 | ISO/TC 138/SC 4 |
| ISO 12176-4:2003 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding | 90.93 | 23.040.45 23.040.20 75.200 | ISO/TC 138/SC 4 |
| ISO 12230:2012 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13056:2011 Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum | 60.60 | 91.140.60 23.040.01 | ISO/TC 138/SC 5 |
| ISO 13229:2010 Thermoplastics piping systems for non-pressure applications -- Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings -- Determination of the viscosity number and K-value | 60.60 | 91.140.80 23.040.20 | ISO/TC 138/SC 1 |
| ISO 13254:2010 Thermoplastics piping systems for non-pressure applications -- Test method for watertightness | 60.60 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings -- Test method for airtightness of joints | 60.60 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 13257:2010 Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling | 60.60 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 13259:2010 Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints | 60.60 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength | 60.60 | 23.040.20 91.140.80 93.030 23.040.45 | ISO/TC 138/SC 1 |
| ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test methods for buckling resistance | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 1 |
| ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Small-scale steady-state test (S4 test) | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Full-scale test (FST) | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13479:2009 Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13480:1997 Polyethylene pipes -- Resistance to slow crack growth -- Cone test method | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13760:1998 Plastics pipes for the conveyance of fluids under pressure -- Miner's rule -- Calculation method for cumulative damage | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 13761:1996 Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C | 90.92 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 13783:1997 Plastics piping systems -- Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints -- Test method for leaktightness and strength while subjected to bending and internal pressure | 90.93 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 13844:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 13845:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection | 90.92 | 23.040.01 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 13846:2000 Plastics piping systems -- End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping -- Test method for long-term leaktightness under internal water pressure | 90.93 | 23.040.60 | ISO/TC 138/SC 2 |
| ISO 13924:2000 Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles | 90.93 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 13950:2007 Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints | 90.93 | 23.040.45 23.040.20 | ISO/TC 138/SC 4 |
| ISO 13950:2007/Cor 1:2008 | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 4 |
| ISO 13951:2001 Plastics piping systems -- Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading | 90.92 | 23.040.01 | ISO/TC 138/SC 5 |
| ISO 13953:2001 Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint | 90.93 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 13954:1997 Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm | 90.93 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 13955:1997 Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies | 90.93 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 13956:2010 Plastics pipes and fittings -- Decohesion test of polyethylene (PE) saddle fusion joints -- Evaluation of ductility of fusion joint interface by tear test | 60.60 | 23.040.60 | ISO/TC 138/SC 5 |
| ISO 13957:1997 Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance | 90.93 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 13966:1998 Thermoplastics pipes and fittings -- Nominal ring stiffnesses | 90.93 | 23.040.20 23.040.45 | ISO/TC 138 |
| ISO 13967:2009 Thermoplastics fittings -- Determination of ring stiffness | 60.60 | 23.040.45 | ISO/TC 138/SC 5 |
| ISO 13968:2008 Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 14236:2000 Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems | 90.93 | 23.040.20 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 14531-1:2002 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes | 90.93 | 23.040.45 23.040.20 75.200 | ISO/TC 138/SC 4 |
| ISO 14531-2:2004 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing | 90.93 | 23.040.45 23.040.20 75.200 | ISO/TC 138/SC 4 |
| ISO 14531-3:2010 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) | 60.60 | 23.040.45 23.040.20 75.200 | ISO/TC 138/SC 4 |
| ISO 14531-4:2006 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines | 90.93 | 23.040.45 23.040.20 75.200 | ISO/TC 138/SC 4 |
| ISO 14828:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor | 90.93 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 14828:2003/Amd 1:2010 | 60.60 | 23.040.20 | ISO/TC 138/SC 6 |
| ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure | 90.93 | 23.040.45 23.040.20 | ISO/TC 138/SC 6 |
| ISO 15306:2003/Amd 1:2012 | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 6 |
| ISO 15398:2012 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas | 60.60 | 83.140.99 | ISO/TC 138/SC 1 |
| ISO 15493:2003 Plastics piping systems for industrial applications -- Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) -- Specifications for components and the system -- Metric series | 90.93 | 23.040.01 | ISO/TC 138/SC 3 |
| ISO 15493:2003/Cor 1:2004 | 60.60 | 23.040.01 | ISO/TC 138/SC 3 |
| ISO 15494:2003 Plastics piping systems for industrial applications -- Polybutene (PB), polyethylene (PE) and polypropylene (PP) -- Specifications for components and the system -- Metric series | 90.92 | 23.040.01 | ISO/TC 138/SC 3 |
| ISO 15853:1999 Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding | 90.93 | 23.040.01 83.080.20 | ISO/TC 138/SC 5 |
| ISO 15874-1:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General | 60.60 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15874-2:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes | 60.60 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15874-3:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings | 60.60 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15874-5:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system | 60.60 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 7: Guidance for the assessment of conformity | 90.92 | 23.040.01 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-1:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 1: General | 90.93 | 23.040.01 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-1:2003/Amd 1:2007 | 60.60 | 91.140.60 23.040.01 | ISO/TC 138/SC 2 |
| ISO 15875-2:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes | 90.93 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-2:2003/Amd 1:2007 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15875-3:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings | 90.93 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-5:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system | 90.93 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15875-5:2003/Cor 1:2007 | 60.60 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15876-1:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 1: General | 90.92 | 23.040.01 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15876-1:2003/Amd 1:2007 | 60.60 | 91.140.60 23.040.01 | ISO/TC 138/SC 2 |
| ISO 15876-2:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15876-2:2003/Amd 1:2007 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15876-3:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings | 90.92 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15876-5:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity | 90.92 | 23.040.20 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15877-1:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-1:2009/Amd 1:2010 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-2:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-2:2009/Amd 1:2010 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-3:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings | 60.60 | 91.140.60 23.040.45 | ISO/TC 138/SC 2 |
| ISO 15877-3:2009/Amd 1:2010 | 60.60 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 15877-5:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 15877-5:2009/Amd 1:2010 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity | 90.92 | 91.140.60 23.040.20 23.040.01 | ISO/TC 138/SC 2 |
| ISO 15908:2002 Adhesives for thermoplastic piping systems -- Test method for the determination of thermal stability of adhesives | 90.20 | 83.180 | ISO/TC 138/SC 5 |
| ISO 16135:2006 Industrial valves -- Ball valves of thermoplastics materials | 90.93 | 23.060.20 | ISO/TC 138/SC 7 |
| ISO 16136:2006 Industrial valves -- Butterfly valves of thermoplastics materials | 90.93 | 23.060.99 | ISO/TC 138/SC 7 |
| ISO 16137:2006 Industrial valves -- Check valves of thermoplastics materials | 90.93 | 23.060.50 | ISO/TC 138/SC 7 |
| ISO 16138:2006 Industrial valves -- Diaphragm valves of thermoplastics materials | 90.93 | 23.060.99 | ISO/TC 138/SC 7 |
| ISO 16139:2006 Industrial valves -- Gate valves of thermoplastics materials | 90.93 | 23.060.30 | ISO/TC 138/SC 7 |
| ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 16422:2006 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications | 90.92 | 23.040.20 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 16479:2012 Thermoplastics pipes for the conveyance of fluids -- Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT) | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: General | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 16486-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 2: Pipes | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 16486-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 3: Fittings | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 16486-5:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 5: Fitness for purpose of the system | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 16486-6:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 6: Code of practice for design, handling and installation | 60.60 | 83.140.30 75.200 | ISO/TC 138/SC 4 |
| ISO 16871:2003 Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO/TR 16913:1999 Plastics pipes and fittings -- Definitions of types of test | 90.93 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 17454:2006 Plastics piping systems -- Multilayer pipes -- Test method for the adhesion of the different layers using a pulling rig | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 17455:2005 Plastics piping systems -- Multilayer pipes -- Determination of the oxygen permeability of the barrier pipe | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 17455:2005/Cor 1:2007 | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 17456:2006 Plastics piping systems -- Multilayer pipes -- Determination of long-term strength | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 1: General | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 4 |
| ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 2: Pipes | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 4 |
| ISO 17467-3:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 3: Fittings | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 4 |
| ISO 17484-1:2006 Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems | 90.92 | 23.040.20 23.040.45 91.140.40 | ISO/TC 138/SC 4 |
| ISO 17484-1:2006/Cor 1:2008 | 60.60 | 23.040.20 23.040.45 91.140.40 | ISO/TC 138/SC 4 |
| ISO 17484-2:2009 Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice | 60.60 | 23.040.20 23.040.45 91.140.40 | ISO/TC 138/SC 4 |
| ISO/TR 18124:2006 Plastics piping systems -- Multilayer M (metal) pipes -- Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 18225:2012 Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems | 60.60 | 75.200 23.040.45 23.040.20 | ISO/TC 138/SC 4 |
| ISO/TS 18226:2006 Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) | 90.93 | 23.040.20 75.200 23.040.45 | ISO/TC 138/SC 4 |
| ISO 18373-1:2007 Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 1: Measurement of the processing temperature | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 18373-2:2008 Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 2: Measurement of the enthalpy of fusion of crystallites | 90.93 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds | 90.60 | 23.040.20 23.040.45 | ISO/TC 138/SC 5 |
| ISO 18553:2002/Amd 1:2007 | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints | 60.60 | 23.040.45 23.040.20 91.140.80 93.030 | ISO/TC 138/SC 6 |
| ISO 19220:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Styrene copolymer blends (SAN + PVC) | 90.20 | 23.040.20 91.140.80 | ISO/TC 138/SC 1 |
| ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators | 90.93 | 03.100.30 23.040.20 23.040.45 91.140.40 | ISO/TC 138/SC 4 |
| ISO 19892:2011 Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of joints to pressure cycling | 60.60 | 23.040.60 83.080.20 | ISO/TC 138/SC 5 |
| ISO 19893:2011 Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of mounted assemblies to temperature cycling | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 19899:2010 Plastics piping systems -- Polyolefin pipes and mechanical fitting assemblies -- Test method for the resistance to end load (AREL test) | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO/TS 19911:2010 Plastics pipes and fittings -- Format of a technical file for characterizing PE spigot end fittings | 60.60 | 23.040.60 23.040.45 | ISO/TC 138/SC 5 |
| ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 1: General | 90.93 | 91.140.60 23.040.01 | ISO/TC 138/SC 2 |
| ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes | 90.93 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 21003-2:2008/Amd 1:2011 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings | 90.93 | 23.040.45 91.140.60 | ISO/TC 138/SC 2 |
| ISO 21003-5:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 5: Fitness for purpose of the system | 90.93 | 23.040.01 91.140.60 | ISO/TC 138/SC 2 |
| ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity | 90.92 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO/TS 21003-7:2008/Amd 1:2010 | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
| ISO 21004:2006 Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply | 90.93 | 23.040.45 23.040.20 93.025 | ISO/TC 138/SC 2 |
| ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system | 90.93 | 23.040.20 93.030 91.140.80 23.040.45 | ISO/TC 138/SC 1 |
| ISO 21138-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A | 90.93 | 93.030 91.140.80 23.040.45 23.040.20 | ISO/TC 138/SC 1 |
| ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B | 90.93 | 93.030 91.140.80 23.040.45 23.040.20 | ISO/TC 138/SC 1 |
| ISO 21307:2011 Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems | 90.92 | 23.040.20 23.040.45 75.200 93.025 | ISO/TC 138/SC 4 |
| ISO 21751:2011 Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO 21787:2006 Industrial valves -- Globe valves of thermoplastics materials | 90.93 | 23.060.10 | ISO/TC 138/SC 7 |
| ISO 22391-1:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General | 60.60 | 23.040.01 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 22391-2:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes | 60.60 | 23.040.20 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 22391-3:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings | 60.60 | 23.040.45 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 22391-5:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system | 60.60 | 23.040.01 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 7: Guidance for the assessment of conformity | 60.60 | 23.040.01 91.140.60 93.025 | ISO/TC 138/SC 2 |
| ISO 23228:2011 Thermoplastics pipes for the conveyance of fluids -- Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes -- Effect of time and temperature on the expected strength | 60.60 | 23.040.20 | ISO/TC 138/SC 5 |
| ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques | 60.60 | 93.030 91.140.80 91.140.60 23.040.20 | ISO/TC 138/SC 6 |
| ISO/TS 26873:2010 Plastics pipes and fittings -- Definition and construction procedures for reference lines | 60.60 | 23.040.45 23.040.20 | ISO/TC 138/SC 5 |
| ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes | 60.60 | 91.140.60 23.040.20 | ISO/TC 138/SC 2 |
