Home

Standards catalogue

Subscribe to updates

ISO/TC 138  - Plastics pipes, fittings and valves for the transport of fluids

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 138 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO/NP 161-1
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series
10.99 23.040.20ISO/TC 138
ISO/FDIS 3458
Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure
50.20 23.040.60ISO/TC 138/SC 5
ISO/FDIS 3459
Plastic piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under negative pressure
50.20 23.040.60ISO/TC 138/SC 5
ISO/FDIS 3501
Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for resistance to pull-out under constant longitudinal force
50.00 23.040.60ISO/TC 138/SC 5
ISO/FDIS 3503
Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure of assemblies subjected to bending
50.20 23.040.60ISO/TC 138/SC 5
ISO/NP 4065
Thermoplastics pipes -- Universal wall thickness table
10.99 23.040.20ISO/TC 138
ISO 4427-1:2007/DAmd 1
Melt mass-flow rate (MFR) for PE 80 and PE 100
40.99 23.040.45
23.040.20
91.140.60
93.025
ISO/TC 138/SC 2
ISO/DIS 4437-4
Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 4: Valves
40.60 83.140.30
75.200
ISO/TC 138/SC 7
ISO/FDIS 6259-1
Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method
50.20 23.040.20ISO/TC 138/SC 5
ISO/FDIS 6259-3
Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes
50.00 23.040.20ISO/TC 138/SC 5
ISO/NP 6964
Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification
10.99ISO/TC 138/SC 5
ISO/AWI 7432
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
20.00 23.040.45
23.040.20
ISO/TC 138/SC 6
ISO/DIS 7509
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure
40.99 23.040.20ISO/TC 138/SC 6
ISO/AWI 7510
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
20.00 23.040.20
23.040.45
ISO/TC 138/SC 6
ISO/AWI 7684
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions
20.00 23.040.20ISO/TC 138/SC 6
ISO/CD 8513
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial longitudinal tensile strength
30.99 23.040.20ISO/TC 138/SC 6
ISO/DIS 8639
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness of flexible joints
40.60 23.040.60ISO/TC 138/SC 6
ISO/DIS 9967
Thermoplastics pipes -- Determination of creep ratio
40.99 23.040.20ISO/TC 138/SC 5
ISO/DIS 9969
Thermoplastics pipes -- Determination of ring stiffness
40.99 23.040.20ISO/TC 138/SC 5
ISO/AWI 10467
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
20.00 23.040.20
91.140.80
93.030
ISO/TC 138/SC 6
ISO/AWI 10639
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
20.00 23.040.20
91.140.60
93.025
ISO/TC 138/SC 6
ISO 10931:2005/DAmd 1
40.60 23.040.01ISO/TC 138/SC 3
ISO/DTR 10986
Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
30.99 23.040.45
23.040.20
ISO/TC 138/SC 6
ISO/NP 11922-1
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series
10.99 23.040.20ISO/TC 138
ISO/NP 13761
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
10.99ISO/TC 138/SC 5
ISO/FDIS 13844
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with plastic pipes -- Test method for leaktightness under negative pressure, angular deflection and deformation
50.00 23.040.20
91.140.60
ISO/TC 138/SC 5
ISO/FDIS 13845
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with thermoplastic pipes -- Test method for leaktightness under internal pressure and with angular deflection
50.00 23.040.01
23.040.20
91.140.60
ISO/TC 138/SC 5
ISO/FDIS 13951.2
Plastics piping systems -- Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
50.20 23.040.01ISO/TC 138/SC 5
ISO/DIS 15494
Plastics piping systems for industrial applications -- Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PERT), crosslinked polyethylene (PE-X), polypropylene (PP) -- Specifications for components and the system -- Metric series
40.99 23.040.01ISO/TC 138/SC 3
ISO 15874-2:2013/NP Amd 1
10.99 23.040.20
91.140.60
ISO/TC 138/SC 2
ISO 15874-3:2013/NP Amd 1
10.99 23.040.45
91.140.60
ISO/TC 138/SC 2
ISO/NP 15876-1
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 1: General
10.99ISO/TC 138/SC 2
ISO/NP 15876-2
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes
10.99ISO/TC 138/SC 2
ISO/NP 15876-3
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings
10.99ISO/TC 138/SC 2
ISO/NP 15876-5
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system
10.99ISO/TC 138/SC 2
ISO/CD 16486-4
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 4: Valves
30.60 75.200
83.140.30
ISO/TC 138/SC 7
ISO/DTR 16943
Plastics piping systems for the supply of gaseous fuels -- On site inspection of PE electrofusion joints using Non Destructive Testing (NDT)
30.20 23.040.20ISO/TC 138/SC 5
ISO/FDIS 17778
Plastics piping systems -- Fittings, valves and ancillaries -- Determination of gaseous flow rate/pressure drop relationships
50.20 23.040.20ISO/TC 138/SC 5
ISO/DIS 17885
Plastics piping systems -- Mechanical fittings for pressure piping systems -- Specifications
40.00 23.040.45
75.200
ISO/TC 138/SC 4
ISO/CD 17902
Wrapped electrofusion jointed systems for solid wall and structured wall piping systems for gravity drains and sewers
30.60 91.140.80
93.030
ISO/TC 138/SC 1
ISO/DIS 18488
Polyethylene (PE) materials for piping systems -- Determination of Strain Hardening Modulus in relation to slow crack growth -- Test method
40.20 23.040.20
23.040.45
ISO/TC 138/SC 5
ISO/DIS 18489
Polyethylene (PE) materials -- Determination of resistance to slow crack growth under cyclic loading -- Cracked Round Bar test method
40.20 23.040.20
23.040.45
ISO/TC 138/SC 5
ISO/DIS 18851
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test method to prove the structural design of fittings
40.60 23.040.20ISO/TC 138/SC 6
ISO/DTS 18853
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Guidance for the assessment of conformity
30.92 23.040.20
23.040.45
ISO/TC 138/SC 6