Home

Standards catalogue

Subscribe to updates

ISO/TC 108  - Mechanical vibration, shock and condition monitoring

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 108 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO/CD 2017-3
Mechanical vibration and shock -- Resilient mounting systems -- -- Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
30.60 17.160ISO/TC 108
ISO/CD 2631-5
Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 5: Method for evaluation of vibration containing multiple shocks
30.92 13.160ISO/TC 108/SC 4
ISO 5349-2:2001/FDAmd 1
50.20 13.160ISO/TC 108/SC 4
ISO 7626-2
Mechanical vibration and shock -- Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter
60.00 17.160ISO/TC 108
ISO 8041:2005/CD Amd 1
30.60 13.160ISO/TC 108/SC 3
ISO 8727:1997/DAmd 1
40.20 13.160ISO/TC 108/SC 4
ISO/NP 10326-1
Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 1: Basic requirements
10.99 13.160
43.020
53.100
65.060.10
ISO/TC 108/SC 4
ISO 10816-6:1995/PRF Amd 1
50.00 17.160
21.240
ISO/TC 108/SC 2
ISO 10816-8:2014/NP Amd 1
10.99 17.160ISO/TC 108/SC 2
ISO/FDIS 10816-21
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 21: Horizontal axis wind turbines with gearbox
50.20 17.160ISO/TC 108/SC 2
ISO/DIS 13373-2
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 2: Processing, analysis and presentation of vibration data
40.99 17.160ISO/TC 108/SC 2
ISO/DIS 13373-3
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 3: Guidelines for vibration diagnosis
40.20 17.160ISO/TC 108/SC 2
ISO/NP 13373-7
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 7: Diagnostic techniques for machine sets in hydraulic power generation and pump-storage plants
10.99ISO/TC 108/SC 2
ISO/CD 13373-9
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 9: Diagnostic techniques for electric motors
30.60 17.160ISO/TC 108/SC 2
ISO/CD 13374-4
Condition monitoring and diagnostics of machine systems -- Data processing, communication and presentation -- Part 4: Presentation
30.99 17.160
35.240.99
ISO/TC 108/SC 5
ISO/DIS 13379-2
Condition monitoring and diagnostics of machines -- Data interpretation and diagnostics techniques -- Part 2: Data-driven applications
40.99 17.160ISO/TC 108/SC 5
ISO/WD 13379-3
Condition monitoring and diagnostics of machines -- Data interpretation and diagnostics techniques -- Part 3: Knowledge-based applications
20.20ISO/TC 108/SC 5
ISO/DIS 13381-1
Condition monitoring and diagnostics of machines -- Prognostics -- Part 1: General guidelines
40.60 17.160ISO/TC 108/SC 5
ISO 14835-1:2005/CD Amd 1
30.60 13.160ISO/TC 108/SC 4
ISO/CD TS 14837-31
Mechanical vibration -- Groundborne noise and vibration arising from rail systems -- Part 31: Measurement for the evaluation of complaints at residential buildings
30.00 17.160
45.080
ISO/TC 108/SC 2
ISO/CD TS 14837-32
Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 32: Measurement of dynamic properties of the ground
30.00 45.080
17.160
ISO/TC 108/SC 2
ISO/NP 14839-1
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 1: Vocabulary
10.99 01.040.17
17.160
ISO/TC 108/SC 2
ISO/NP 16063-17
Methods for the calibration of vibration and shock transducers -- Part 17: Primary calibration by centrifuge
10.99 17.160ISO/TC 108/SC 3
ISO/DIS 16063-32
Methods for the calibration of vibration and shock transducers -- Part 32: Resonance testing -- Testing the frequency and the phase response of accelerometers by means of shock excitation
40.60 17.160ISO/TC 108/SC 3
ISO/CD 16063-33
Methods for the calibration of vibration and shock transducers -- Part 33: Testing of magnetic field sensitivity
30.20 17.160ISO/TC 108/SC 3
ISO/DIS 16063-43
Methods for the calibration of vibration and shock transducers -- Part 43: Calibration of accelerometers by model-based parameter identification
40.20 17.160ISO/TC 108/SC 3
ISO/CD 16079-1
Condition monitoring and diagnostics of wind turbines -- Part 1: General guidelines
30.00 27.180ISO/TC 108/SC 5
ISO 18129
Condition monitoring and diagnostics of machines -- Approaches for performance diagnosis
60.00 17.160ISO/TC 108/SC 5
ISO 18434-1:2008/NP Amd 1
10.99 17.160ISO/TC 108/SC 5
ISO 20283-3:2006/CD Amd 1
30.20 47.020.01
17.140.30
ISO/TC 108/SC 2
ISO/CD 20283-5
Mechanical vibration -- Measurement of vibration on ships -- Part 5: Measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
30.20 17.160
47.020.80
ISO/TC 108/SC 2
ISO/NP 20816-1
Mechanical vibration - Measurement and evaluation of machine vibration -- Part 1: General Guidelines
10.99ISO/TC 108/SC 2
ISO/NP 20816-5
Mechanical vibration -- Measurement and evaluation of machine vibration -- Part 5: Machine sets in hydraulic power generating and pump-storage plants
10.99ISO/TC 108/SC 2
ISO/NP 21940-2
Mechanical vibration -- Rotor balancing -- Part 2: Vocabulary
10.99ISO/TC 108/SC 2
ISO/CD 21940-11
Mechanical vibration -- Rotor balancing -- Part 11: Procedures and tolerances for rotors with rigid behaviour
30.60 21.120.40ISO/TC 108/SC 2
ISO/CD 21940-12
Mechanical vibration -- Rotor balancing -- Part 12: Procedures and tolerances for rotors with flexible behaviour
30.00 21.120.40ISO/TC 108/SC 2
ISO/DIS 22266-1
Mechanical vibration -- Torsional vibration of rotating machinery -- Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
40.99 29.160.40
17.160
ISO/TC 108/SC 2
ISO/CD 29821-2
Condition monitoring and diagnostics of machines -- Ultrasound -- Part 2: Procedures and validation
30.20 17.160ISO/TC 108/SC 5