Home

Standards catalogue

Subscribe to updates

ISO/TC 92  - Fire safety

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 92 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 834-1:1999
Fire-resistance tests -- Elements of building construction -- Part 1: General requirements
90.60 13.220.50ISO/TC 92/SC 2
ISO 834-1:1999/Amd 1:2012
60.60 13.220.50ISO/TC 92/SC 2
ISO/TR 834-2:2009
Fire-resistance tests -- Elements of building construction -- Part 2: Guidance on measuring uniformity of furnace exposure on test samples
60.60 13.220.50ISO/TC 92/SC 2
ISO/TR 834-3:2012
Fire-resistance tests -- Elements of building construction -- Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
60.60 13.220.50ISO/TC 92/SC 2
ISO 834-4:2000
Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements
90.93 13.220.50ISO/TC 92/SC 2
ISO 834-5:2000
Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements
90.93 13.220.50ISO/TC 92/SC 2
ISO 834-6:2000
Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams
90.93 13.220.50ISO/TC 92/SC 2
ISO 834-7:2000
Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns
90.93 13.220.50ISO/TC 92/SC 2
ISO 834-8:2002
Fire-resistance tests -- Elements of building construction -- Part 8: Specific requirements for non-loadbearing vertical separating elements
90.60 13.220.50ISO/TC 92/SC 2
ISO 834-8:2002/Cor 1:2009
60.60 13.220.50ISO/TC 92/SC 2
ISO 834-9:2003
Fire-resistance tests -- Elements of building construction -- Part 9: Specific requirements for non-loadbearing ceiling elements
90.93 13.220.50ISO/TC 92/SC 2
ISO 834-9:2003/Cor 1:2009
60.60 13.220.50ISO/TC 92/SC 2
ISO 834-10:2014
Fire resistance tests -- Elements of building construction -- Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
60.60 13.220.50ISO/TC 92/SC 2
ISO 834-11:2014
Fire resistance tests -- Elements of building construction -- Part 11: Specific requirements for the assessment of fire protection to structural steel elements
60.60 13.220.50ISO/TC 92/SC 2
ISO 834-12:2012
Fire resistance tests -- Elements of building construction -- Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
60.60 13.220.50ISO/TC 92/SC 2
ISO 1182:2010
Reaction to fire tests for products -- Non-combustibility test
60.60 13.220.50ISO/TC 92/SC 1
ISO 1716:2010
Reaction to fire tests for products -- Determination of the gross heat of combustion (calorific value)
60.60 13.220.50
91.100.01
ISO/TC 92/SC 1
ISO 3008:2007
Fire-resistance tests -- Door and shutter assemblies
90.93 13.220.50
91.060.50
ISO/TC 92/SC 2
ISO 3008-2:2014
Fire-resistance tests -- Part 2: Lift landing door assemblies
60.60 13.220.50
91.060.50
ISO/TC 92/SC 2
ISO 3009:2003
Fire-resistance tests -- Elements of building construction -- Glazed elements
90.93 81.040.20
13.220.50
ISO/TC 92/SC 2
ISO/TS 3814:2014
Standard tests for measuring reaction-to-fire of products and materials -- Their development and application
60.60 13.220.50ISO/TC 92/SC 1
ISO 5657:1997
Reaction to fire tests -- Ignitability of building products using a radiant heat source
90.20 13.220.50ISO/TC 92/SC 1
ISO/TS 5658-1:2006
Reaction to fire tests -- Spread of flame -- Part 1: Guidance on flame spread
90.93 13.220.50ISO/TC 92/SC 1
ISO 5658-2:2006
Reaction to fire tests -- Spread of flame -- Part 2: Lateral spread on building and transport products in vertical configuration
90.93 13.220.50ISO/TC 92/SC 1
ISO 5658-2:2006/Amd 1:2011
60.60 13.220.50ISO/TC 92/SC 1
ISO 5658-4:2001
Reaction to fire tests -- Spread of flame -- Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
90.93 13.220.50ISO/TC 92/SC 1
ISO 5660-1:2002
Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method)
90.92 13.220.50ISO/TC 92/SC 1
ISO 5660-2:2002
Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 2: Smoke production rate (dynamic measurement)
90.93 13.220.50ISO/TC 92/SC 1
ISO/TS 5660-3:2012
Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 3: Guidance on measurement
60.60 13.220.50ISO/TC 92/SC 1
ISO 5925-1:2007
Fire tests -- Smoke-control door and shutter assemblies -- Part 1: Ambient- and medium-temperature leakage tests
90.93 91.060.50
13.220.20
13.220.50
ISO/TC 92/SC 2
ISO/TR 5925-2:2006
Fire tests -- Smoke-control door and shutter assemblies -- Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy
90.93 13.220.20
13.220.50
91.060.50
ISO/TC 92/SC 2
ISO 6944-1:2008
Fire containment -- Elements of building construction -- Part 1: Ventilation ducts
90.93 13.220.50
91.140.30
ISO/TC 92/SC 2
ISO 6944-2:2009
Fire containment -- Elements of building construction -- Part 2: Kitchen extract ducts
90.60 91.140.30
13.220.50
ISO/TC 92/SC 2
ISO 9239-1:2010
Reaction to fire tests for floorings -- Part 1: Determination of the burning behaviour using a radiant heat source
60.60 97.150
13.220.40
59.080.60
ISO/TC 92/SC 1
ISO 9239-2:2002
Reaction to fire tests for floorings -- Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
90.93 59.080.60
97.150
13.220.40
ISO/TC 92/SC 1
ISO 9705:1993
Fire tests -- Full-scale room test for surface products
90.92 13.220.50ISO/TC 92/SC 1
ISO/TR 9705-2:2001
Reaction-to-fire tests -- Full-scale room tests for surface products -- Part 2: Technical background and guidance
90.92 13.220.50ISO/TC 92/SC 1
ISO 10294-1:1996
Fire resistance tests -- Fire dampers for air distribution systems -- Part 1: Test method
90.93 13.220.50
91.140.30
ISO/TC 92/SC 2
ISO 10294-1:1996/Amd 1:2014
60.60 13.220.50
91.140.30
ISO/TC 92/SC 2
ISO 10294-2:1999
Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results
90.93 91.140.30
13.220.50
ISO/TC 92/SC 2
ISO 10294-3:1999
Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method
90.93 13.220.50
91.140.30
ISO/TC 92/SC 2
ISO 10294-4:2001
Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism
90.93 13.220.50
91.140.30
ISO/TC 92/SC 2
ISO 10294-4:2001/Amd 1:2014
Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen
60.60 13.220.50
91.140.30
ISO/TC 92/SC 2
ISO 10294-5:2005
Fire resistance tests -- Fire dampers for air distribution systems -- Part 5: Intumescent fire dampers
90.93 13.220.50
91.140.30
ISO/TC 92/SC 2
ISO 10295-1:2007
Fire tests for building elements and components -- Fire testing of service installations -- Part 1: Penetration seals
90.93 91.140.01
13.220.50
ISO/TC 92/SC 2
ISO 10295-2:2009
Fire tests for building elements and components -- Fire testing of service installations -- Part 2: Linear joint (gap) seals
90.93 91.140.01
13.220.50
ISO/TC 92/SC 2
ISO 10295-2:2009/Cor 1:2009
60.60 91.140.01
13.220.50
ISO/TC 92/SC 2
ISO/TR 10295-3:2012
Fire tests for building elements and components -- Fire testing of service installations -- Part 3: Single component penetration seals -- Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
60.60 91.140.01
13.220.50
ISO/TC 92/SC 2
ISO/TR 11696-1:1999
Uses of reaction to fire test results -- Part 1: Application of test results to predict fire performance of internal linings and other building products
90.93 13.220.50ISO/TC 92/SC 1
ISO/TR 11696-2:1999
Uses of reaction to fire test results -- Part 2: Fire hazard assessment of construction products
90.93 13.220.50ISO/TC 92/SC 1
ISO/TR 11925-1:1999
Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 1: Guidance on ignitability
90.93 13.220.50ISO/TC 92/SC 1
ISO 11925-2:2010
Reaction to fire tests -- Ignitability of products subjected to direct impingement of flame -- Part 2: Single-flame source test
60.60 13.220.50ISO/TC 92/SC 1
ISO 11925-2:2010/Cor 1:2011
60.60 13.220.50ISO/TC 92/SC 1
ISO 11925-3:1997
Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 3: Multi-source test
90.93 13.220.50ISO/TC 92/SC 1
ISO 11925-3:1997/Cor 1:1998
60.60 13.220.50ISO/TC 92/SC 1
ISO 12136:2011
Reaction to fire tests -- Measurement of material properties using a fire propagation apparatus
60.60 13.220.50
13.220.40
ISO/TC 92/SC 1
ISO 12468-1:2013
External exposure of roofs to fire -- Part 1: Test method
60.60 13.220.50
91.060.20
ISO/TC 92/SC 2
ISO 12468-2:2013
External exposure of roofs to fire -- Part 2: Classification of roofs
60.60 13.220.50
91.060.20
ISO/TC 92/SC 2
ISO/TR 12468-3:2014
External exposure of roofs to fire -- Part 3: Commentary
60.60 13.220.50
91.060.20
ISO/TC 92/SC 2
ISO/TR 12471:2004
Computational structural fire design -- Review of calculation models, fire tests for determining input material data and needs for further development
90.93 13.220.50ISO/TC 92/SC 2
ISO 12472:2003
Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
90.60 13.220.50ISO/TC 92/SC 2
ISO 12828-1:2011
Validation method for fire gas analysis -- Part 1: Limits of detection and quantification
60.60 13.220.01ISO/TC 92/SC 3
ISO 12863:2010
Standard test method for assessing the ignition propensity of cigarettes
90.92 13.220.40
65.160
ISO/TC 92/SC 1
ISO 12863:2010/Cor 1:2011
60.60 13.220.40
65.160
ISO/TC 92/SC 1
ISO 12949:2011
Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
60.60 13.220.50ISO/TC 92/SC 1
ISO 13344:2004
Estimation of the lethal toxic potency of fire effluents
90.92 13.220.99ISO/TC 92/SC 3
ISO/TS 13447:2013
Fire safety engineering -- Guidance for use of fire zone models
60.60 13.220.01ISO/TC 92/SC 4
ISO 13571:2012
Life-threatening components of fire -- Guidelines for the estimation of time to compromised tenability in fires
60.60 13.220.01ISO/TC 92/SC 3
ISO 13784-1:2014
Reaction to fire test for sandwich panel building systems -- Part 1: Small room test
60.60 13.220.50ISO/TC 92/SC 1
ISO 13784-2:2002
Reaction-to-fire tests for sandwich panel building systems -- Part 2: Test method for large rooms
90.93 13.220.50ISO/TC 92/SC 1
ISO 13785-1:2002
Reaction-to-fire tests for façades -- Part 1: Intermediate-scale test
90.93 13.220.50
91.060.10
ISO/TC 92/SC 1
ISO 13785-2:2002
Reaction-to-fire tests for façades -- Part 2: Large-scale test
90.93 13.220.50
91.060.10
ISO/TC 92/SC 1
ISO 13943:2008
Fire safety -- Vocabulary
90.92 13.220.01
01.040.13
ISO/TC 92
ISO 14696:2009
Reaction-to-fire tests -- Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
90.93 13.220.50
13.220.40
ISO/TC 92/SC 1
ISO 14697:2007
Reaction-to-fire tests -- Guidance on the choice of substrates for building and transport products
90.93 13.220.50ISO/TC 92/SC 1
ISO 14934-1:2010
Fire tests -- Calibration and use of heat flux meters -- Part 1: General principles
60.60 13.220.40
13.220.50
ISO/TC 92/SC 1
ISO 14934-2:2013
Fire tests -- Calibration and use of heat flux meters -- Part 2: Primary calibration methods
60.60 13.220.50
13.220.40
ISO/TC 92/SC 1
ISO 14934-3:2012
Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method
60.60 13.220.50
13.220.40
ISO/TC 92/SC 1
ISO 14934-4:2014
Fire tests -- Calibration and use of heat flux meters -- Part 4: Guidance on the use of heat flux meters in fire tests
60.60 13.220.40
13.220.50
ISO/TC 92/SC 1
ISO/TR 15655:2003
Fire resistance -- Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
90.92 13.220.40ISO/TC 92/SC 2
ISO/TR 15656:2003
Fire resistance -- Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour
90.93 13.220.01ISO/TC 92/SC 2
ISO/TR 15657:2013
Fire resistance tests -- Guidelines for computational structural fire design
60.60 13.220.01ISO/TC 92/SC 2
ISO/TR 15658:2009
Fire resistance tests -- Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation
60.60 13.220.01ISO/TC 92/SC 2
ISO 16312-1:2010
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 1: Criteria
60.60 13.220.99ISO/TC 92/SC 3
ISO/TR 16312-2:2007
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 2: Evaluation of individual physical fire models
60.60 13.220.99ISO/TC 92/SC 3
ISO 16730:2008
Fire safety engineering -- Assessment, verification and validation of calculation methods
90.92 13.220.01ISO/TC 92/SC 4
ISO/TR 16730-2:2013
Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 2: Example of a fire zone model
60.60 13.220.01ISO/TC 92/SC 4
ISO/TR 16730-3:2013
Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 3: Example of a CFD model
60.60 13.220.01ISO/TC 92/SC 4
ISO/TR 16730-4:2013
Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 4: Example of a structural model
60.60 13.220.01ISO/TC 92/SC 4
ISO/TR 16730-5:2013
Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 5: Example of an Egress model
60.60 13.220.01ISO/TC 92/SC 4
ISO 16732-1:2012
Fire safety engineering -- Fire risk assessment -- Part 1: General
60.60 13.220.01ISO/TC 92/SC 4
ISO/TR 16732-2:2012
Fire Safety Engineering -- Fire risk assessment -- Part 2: Example of an office building
60.60 13.220.01ISO/TC 92/SC 4
ISO/TR 16732-3:2013
Fire safety engineering -- Fire risk assessment -- Part 3: Example of an industrial property
60.60 13.220.01ISO/TC 92/SC 4
ISO/TS 16733:2006
Fire safety engineering -- Selection of design fire scenarios and design fires
90.93 13.220.01ISO/TC 92/SC 4
ISO 16734:2006
Fire safety engineering -- Requirements governing algebraic equations -- Fire plumes
90.60 13.220.01ISO/TC 92/SC 4
ISO 16735:2006
Fire safety engineering -- Requirements governing algebraic equations -- Smoke layers
90.93 13.220.01ISO/TC 92/SC 4
ISO 16736:2006
Fire safety engineering -- Requirements governing algebraic equations -- Ceiling jet flows
90.60 13.220.01ISO/TC 92/SC 4
ISO 16737:2012
Fire safety engineering -- Requirements governing algebraic equations -- Vent flows
60.60 13.220.01ISO/TC 92/SC 4
ISO/TR 16738:2009
Fire-safety engineering -- Technical information on methods for evaluating behaviour and movement of people
60.60 13.220.01ISO/TC 92/SC 4
ISO/TR 17252:2008
Fire tests -- Applicability of reaction to fire tests to fire modelling and fire safety engineering
90.92 13.220.50
13.220.40
ISO/TC 92/SC 1
ISO/TS 17431:2006
Fire tests-- Reduced-scale model box test
90.93 13.220.50
13.220.40
ISO/TC 92/SC 1
ISO 17554:2014
Reaction to fire tests -- Mass loss measurement
60.60 13.220.50
13.220.40
ISO/TC 92/SC 1
ISO/TR 17755:2014
Fire safety -- Overview of national fire statistics practices
60.60 13.220.20ISO/TC 92
ISO/TS 19700:2007
Controlled equivalence ratio method for the determination of hazardous components of fire effluents
90.92 13.220.01ISO/TC 92/SC 3
ISO 19701:2013
Methods for sampling and analysis of fire effluents
60.60 13.220.01ISO/TC 92/SC 3
ISO 19702:2006
Toxicity testing of fire effluents -- Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
90.92 13.220.01ISO/TC 92/SC 3
ISO 19703:2010
Generation and analysis of toxic gases in fire -- Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
60.60 13.220.01ISO/TC 92/SC 3
ISO 19706:2011
Guidelines for assessing the fire threat to people
60.60 13.220.01ISO/TC 92/SC 3
ISO 20632:2008
Reaction-to-fire tests -- Small room test for pipe insulation products or systems
90.93 13.220.50ISO/TC 92/SC 1
ISO/TS 22269:2005
Reaction to fire tests -- Fire growth -- Full-scale test for stairs and stair coverings
90.93 91.060.30
13.220.50
ISO/TC 92/SC 1
ISO/TR 22898:2006
Review of outputs for fire containment tests for buildings in the context of fire safety engineering
90.93 13.220.50
13.220.01
ISO/TC 92/SC 2
ISO 22899-1:2007
Determination of the resistance to jet fires of passive fire protection materials -- Part 1: General requirements
90.93 13.220.50ISO/TC 92/SC 2
ISO/TR 22899-2:2013
Determination of the resistance to jet fires of passive fire protection -- Part 2: Guidance on classification and implementation methods
60.60 13.220.50ISO/TC 92/SC 2
ISO 23932:2009
Fire safety engineering -- General principles
90.92 13.220.01ISO/TC 92/SC 4
ISO 24473:2008
Fire tests -- Open calorimetry -- Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
90.93 13.220.40
13.220.50
ISO/TC 92/SC 1
ISO/TS 24679:2011
Fire safety engineering -- Performance of structures in fire
90.93 13.220.01ISO/TC 92/SC 4
ISO 26367-1:2011
Guidelines for assessing the adverse environmental impact of fire effluents -- Part 1: General
60.60 13.220.01ISO/TC 92/SC 3
ISO/TR 26368:2012
Environmental damage limitation from fire-fighting water run-off
60.60 13.220.01ISO/TC 92/SC 3
ISO 27368:2008
Analysis of blood for asphyxiant toxicants -- Carbon monoxide and hydrogen cyanide
90.93 13.220.99ISO/TC 92/SC 3
ISO 29473:2010
Fire tests -- Uncertainty of measurements in fire tests
60.60 13.220.01ISO/TC 92/SC 1
ISO 29903:2012
Guidance for comparison of toxic gas data between different physical fire models and scales
60.60 13.220.01ISO/TC 92/SC 3
ISO 29904:2013
Fire chemistry -- Generation and measurement of aerosols
60.60 13.220.01ISO/TC 92/SC 3