Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions | 90.93 | 03.120.30 17.020 |
| ISO 5725-1:1994/Cor 1:1998 | 60.60 | 03.120.30 17.020 |
| ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method | 90.92 | 03.120.30 17.020 |
| ISO 5725-2:1994/Cor 1:2002 | 60.60 | 03.120.30 17.020 |
| ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method | 90.92 | 03.120.30 17.020 |
| ISO 5725-3:1994/Cor 1:2001 | 60.60 | 03.120.30 17.020 |
| ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method | 90.92 | 03.120.30 17.020 |
| ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method | 90.93 | 03.120.30 17.020 |
| ISO 5725-5:1998/Cor 1:2005 | 60.60 | 17.020 03.120.30 |
| ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values | 90.93 | 03.120.30 17.020 |
| ISO 5725-6:1994/Cor 1:2001 | 60.60 | 03.120.30 17.020 |
| ISO 10576-1:2003 Statistical methods -- Guidelines for the evaluation of conformity with specified requirements -- Part 1: General principles | 90.93 | 03.120.30 |
| ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials | 90.60 | 03.120.30 |
| ISO 11095:1996 Linear calibration using reference materials | 90.93 | 03.120.30 17.020 |
| ISO 11648-1:2003 Statistical aspects of sampling from bulk materials -- Part 1: General principles | 90.93 | 03.120.30 |
| ISO 11648-2:2001 Statistical aspects of sampling from bulk materials -- Part 2: Sampling of particulate materials | 90.93 | 03.120.30 |
| ISO 11843-1:1997 Capability of detection -- Part 1: Terms and definitions | 90.93 | 03.120.30 01.040.03 17.020 |
| ISO 11843-1:1997/Cor 1:2003 | 60.60 | 17.020 01.040.03 03.120.30 |
| ISO 11843-2:2000 Capability of detection -- Part 2: Methodology in the linear calibration case | 90.93 | 03.120.30 17.020 |
| ISO 11843-2:2000/Cor 1:2007 | 60.60 | 03.120.30 17.020 |
| ISO 11843-3:2003 Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used | 90.93 | 03.120.30 17.020 |
| ISO 11843-4:2003 Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value | 90.93 | 17.020 03.120.30 |
| ISO 11843-5:2008 Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases | 90.93 | 17.020 03.120.30 |
| ISO 11843-6:2013 Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations | 60.60 | 03.120.30 17.020 |
| ISO 11843-7:2012 Capability of detection -- Part 7: Methodology based on stochastic properties of instrumental noise | 60.60 | 03.120.30 17.020 |
| ISO/DIS 13528 Statistical methods for use in proficiency testing by interlaboratory comparisons | 40.60 | 03.120.30 |
| ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons | 90.92 | 03.120.30 |
| ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty | 60.60 | 03.120.30 |
| ISO/WD 15725-1 Accuracy (trueness and precision) of measurement methods and results -- Part 1: Introduction and basic principles | 20.20 | 03.120.30 17.020 |
| ISO/WD 15725-2 Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method to evaluate the accuracy of measurement methods | 20.20 | 03.120.30 17.020 |
| ISO/NP TS 17503 Statistical methods of uncertainty evaluation -- Guidance on evaluation of uncertainty using two-factor crossed designs | 10.99 | 17.020 |
| ISO 21748:2010 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation | 60.60 | 17.020 |
| ISO/TS 21749:2005 Measurement uncertainty for metrological applications -- Repeated measurements and nested experiments | 90.93 | 17.020 |
| ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results -- Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results | 60.60 | 17.020 03.120.30 |
| ISO/TS 28037:2010 Determination and use of straight-line calibration functions | 60.60 | 03.120.30 |
