Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 527-4:1997 Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 527-5:2009 Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1172:1996 Textile-glass-reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination methods | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-1:2001 Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-2:2001 Fibre-reinforced plastics -- Methods of producing test plates -- Part 2: Contact and spray-up moulding | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-3:2000 Fibre-reinforced plastics -- Methods of producing test plates -- Part 3: Wet compression moulding | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-4:2005 Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-4:2005/Amd 1:2010 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-5:2001 Fibre-reinforced plastics -- Methods of producing test plates -- Part 5: Filament winding | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-6:2002 Fibre-reinforced plastics -- Methods of producing test plates -- Part 6: Pultrusion moulding | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-7:2001 Fibre-reinforced plastics -- Methods of producing test plates -- Part 7: Resin transfer moulding | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-8:2004 Fibre-reinforced plastics -- Methods of producing test plates -- Part 8: Compression moulding of SMC and BMC | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-9:2003 Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-10:2005 Fibre-reinforced plastics -- Methods of producing test plates -- Part 10: Injection moulding of BMC and other long-fibre moulding compounds -- General principles and moulding of multipurpose test specimens | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-11:2005 Fibre-reinforced plastics -- Methods of producing test plates -- Part 11: Injection moulding of BMC and other long-fibre moulding compounds -- Small plates | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1887:1995 Textile glass -- Determination of combustible-matter content | 90.92 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 1888:2006 Textile glass -- Staple fibres or filaments -- Determination of average diameter | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 1889:2009 Reinforcement yarns -- Determination of linear density | 60.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 1890:2009 Reinforcement yarns -- Determination of twist | 60.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 2078:1993 Textile glass -- Yarns -- Designation | 90.20 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 2113:1996 Reinforcement fibres -- Woven fabrics -- Basis for a specification | 90.93 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 2113:1996/Cor 1:2003 | 60.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics -- Determination of time of dissolution of the binder in styrene | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 2559:2011 Textile glass -- Mats (made from chopped or continuous strands) -- Designation and basis for specifications | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 2797:1986 Textile glass -- Rovings -- Basis for a specification | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3341:2000 Textile glass -- Yarns -- Determination of breaking force and breaking elongation | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3342:2011 Textile glass -- Mats -- Determination of tensile breaking force | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3343:2010 Reinforcement yarns -- Determination of twist balance index | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3344:1997 Reinforcement products -- Determination of moisture content | 90.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 3374:2000 Reinforcement products -- Mats and fabrics -- Determination of mass per unit area | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3375:2009 Textile glass -- Determination of stiffness of rovings | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3597-1:2003 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 1: General considerations and preparation of rods | 90.20 | 59.100.10 83.120 | ISO/TC 61/SC 13 |
| ISO 3597-2:2003 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 2: Determination of flexural strength | 90.20 | 83.120 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3597-3:2003 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength | 90.20 | 59.100.10 83.120 | ISO/TC 61/SC 13 |
| ISO 3597-4:2003 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 4: Determination of apparent interlaminar shear strength | 90.20 | 59.100.10 83.120 | ISO/TC 61/SC 13 |
| ISO 3598:2011 Textile glass -- Yarns -- Basis for a specification | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3616:2001 Textile glass -- Chopped-strand and continuous-filament mats -- Determination of average thickness, thickness under load and recovery after compression | 90.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4602:2010 Reinforcements -- Woven fabrics -- Determination of number of yarns per unit length of warp and weft | 60.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 4603:1993 Textile glass -- Woven fabrics -- Determination of thickness | 90.20 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4603:1993/Amd 1:2010 | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4604:2011 Reinforcement fabrics -- Determination of conventional flexural stiffness -- Fixed-angle flexometer method | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4606:1995 Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at break by the strip method | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4899:1993 Textile-glass-reinforced thermosetting plastics -- Properties and test methods | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 4900:2011 Textile glass -- Mats and fabrics -- Determination of contact mouldability | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 5025:1997 Reinforcement products -- Woven fabrics -- Determination of width and length | 90.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 7822:1990 Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 8516:2011 Textile glass -- Textured yarns -- Basis for a specification | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 8605:2001 Textile-glass-reinforced plastics -- Sheet moulding compound (SMC) -- Basis for a specification | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 8606:1990 Plastics -- Prepregs -- Bulk moulding compound (BMC) and dough moulding compound (DMC) -- Basis for a specification | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 9163:2005 Textile glass -- Rovings -- Manufacture of test specimens and determination of tensile strength of impregnated rovings | 90.20 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 9782:1993 Plastics -- Reinforced moulding compounds and prepregs -- Determination of apparent volatile-matter content | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 10119:2002 Carbon fibre -- Determination of density | 90.60 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 10122:1995 Reinforcement materials -- Tubular braided sleeves -- Basis for a specification | 90.92 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 10352:2010 Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of mass per unit area | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 10371:1993 Reinforcement materials -- Braided tapes -- Basis for a specification | 90.20 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 10548:2002 Carbon fibre -- Determination of size content | 90.60 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 10548:2002/Cor 1:2008 | 60.60 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 10618:2004 Carbon fibre -- Determination of tensile properties of resin-impregnated yarn | 90.60 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 11566:1996 Carbon fibre -- Determination of the tensile properties of single-filament specimens | 90.93 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 11567:1995 Carbon fibre -- Determination of filament diameter and cross-sectional area | 90.93 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 11667:1997 Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of resin, reinforced-fibre and mineral-filler content -- Dissolution methods | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12114:1997 Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of cure characteristics | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12115:1997 Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of flowability, maturation and shelf life | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12115:1997/Cor 1:1998 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12815:2013 Fibre-reinforced plastic composites -- Determination of plain-pin bearing strength | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12817:2013 Fibre-reinforced plastic composites -- Determination of open-hole compression strength | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 13002:1998 Carbon fibre -- Designation system for filament yarns | 90.93 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 13003:2003 Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO/TR 13883:1995 Plastics -- Guide to the writing of test methods | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14125:1998 Fibre-reinforced plastic composites -- Determination of flexural properties | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14125:1998/Amd 1:2011 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14125:1998/Cor 1:2001 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14126:1999 Fibre-reinforced plastic composites -- Determination of compressive properties in the in-plane direction | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14126:1999/Cor 1:2001 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14127:2008 Carbon-fibre-reinforced composites -- Determination of the resin, fibre and void contents | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14129:1997 Fibre-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14130:1997 Fibre-reinforced plastic composites -- Determination of apparent interlaminar shear strength by short-beam method | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14130:1997/Cor 1:2003 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 15024:2001 Fibre-reinforced plastic composites -- Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 15034:1999 Composites -- Prepregs -- Determination of resin flow | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 15039:2003 Textile-glass rovings -- Determination of solubility of size | 90.20 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 15040:1999 Composites -- Prepregs -- Determination of gel time | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 15100:2000 Plastics -- Reinforcement fibres -- Chopped strands -- Determination of bulk density | 90.93 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 15310:1999 Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 17771:2003 Plastics -- Thermoset moulding compounds -- Determination of the degree of fibre wetting in SMC | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 18352:2009 Carbon-fibre-reinforced plastics -- Determination of compression-after-impact properties at a specified impact-energy level | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 22314:2006 Plastics -- Glass-fibre-reinforced products -- Determination of fibre length | 90.92 | 83.120 | ISO/TC 61/SC 13 |
