Home

Standards catalogue

Subscribe to updates

ISO/TC 61  - Plastics

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 61 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 60:1977
Plastics -- Determination of apparent density of material that can be poured from a specified funnel
90.93 83.080.10ISO/TC 61/SC 12
ISO 61:1976
Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel
90.20 83.080.10ISO/TC 61/SC 12
ISO 62:2008
Plastics -- Determination of water absorption
90.93 83.080.01ISO/TC 61/SC 6
ISO 75-1:2013
Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
60.60 83.080.01ISO/TC 61/SC 2
ISO 75-2:2013
Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
60.60 83.080.10ISO/TC 61/SC 2
ISO 75-3:2004
Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
90.93 83.080.10
83.120
ISO/TC 61/SC 2
ISO 119:1977
Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method
90.20 83.080.10ISO/TC 61/SC 12
ISO 120:1977
Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric comparison method
90.20 83.080.10ISO/TC 61/SC 12
ISO 171:1980
Plastics -- Determination of bulk factor of moulding materials
90.93 83.080.01ISO/TC 61/SC 5
ISO 172:1978
Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia
90.20 83.080.10ISO/TC 61/SC 12
ISO 175:2010
Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals
60.60 83.080.01ISO/TC 61/SC 6
ISO 176:2005
Plastics -- Determination of loss of plasticizers -- Activated carbon method
90.93 83.080.01ISO/TC 61/SC 6
ISO 177:1988
Plastics -- Determination of migration of plasticizers
90.93 83.080.01ISO/TC 61/SC 6
ISO 178:2010
Plastics -- Determination of flexural properties
60.60 83.080.01ISO/TC 61/SC 2
ISO 178:2010/Amd 1:2013
60.60 83.080.01ISO/TC 61/SC 2
ISO 179-1:2010
Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
60.60 83.080.01ISO/TC 61/SC 2
ISO 179-2:1997
Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test
90.93 83.080.01ISO/TC 61/SC 2
ISO 179-2:1997/Amd 1:2011
Precision data
60.60 83.080.01ISO/TC 61/SC 2
ISO 179-2:1997/Cor 1:1998
60.60 83.080.01ISO/TC 61/SC 2
ISO 180:2000
Plastics -- Determination of Izod impact strength
90.93 83.080.01ISO/TC 61/SC 2
ISO 180:2000/Amd 1:2006
60.60 83.080.01ISO/TC 61/SC 2
ISO 180:2000/Amd 2:2013
Precision data
60.60 83.080.01ISO/TC 61/SC 2
ISO 182-1:1990
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 1: Congo red method
90.93 83.080.20ISO/TC 61/SC 9
ISO 182-2:1990
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 2: pH method
90.93 83.080.20ISO/TC 61/SC 9
ISO 182-3:1993
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 3: Conductometric method
90.93 83.080.20ISO/TC 61/SC 9
ISO 182-4:1993
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method
90.93 83.080.20ISO/TC 61/SC 9
ISO 291:2008
Plastics -- Standard atmospheres for conditioning and testing
90.93 83.080.01ISO/TC 61/SC 6
ISO 293:2004
Plastics -- Compression moulding of test specimens of thermoplastic materials
90.93 83.080.20ISO/TC 61/SC 9
ISO 294-1:1996
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens
90.93 83.080.20ISO/TC 61/SC 9
ISO 294-1:1996/Amd 1:2001
60.60 83.080.20ISO/TC 61/SC 9
ISO 294-1:1996/Amd 2:2005
Methods of determining the hold pressure and hold time
60.60 83.080.20ISO/TC 61/SC 9
ISO 294-2:1996
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
90.93 83.080.20ISO/TC 61/SC 9
ISO 294-2:1996/Amd 1:2004
60.60 83.080.20ISO/TC 61/SC 9
ISO 294-3:2002
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
90.93 83.080.20ISO/TC 61/SC 9
ISO 294-3:2002/Amd 1:2006
60.60 83.080.20ISO/TC 61/SC 9
ISO 294-4:2001
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
90.93 83.080.20ISO/TC 61/SC 9
ISO 294-5:2011
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
90.92 83.080.20ISO/TC 61/SC 9
ISO 295:2004
Plastics -- Compression moulding of test specimens of thermosetting materials
90.93 83.080.10ISO/TC 61/SC 12
ISO 305:1990
Plastics -- Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds -- Discoloration method
90.93 83.080.20ISO/TC 61/SC 9
ISO 306:2013
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
60.60 83.080.20ISO/TC 61/SC 2
ISO 307:2007
Plastics -- Polyamides -- Determination of viscosity number
90.93 83.080.20ISO/TC 61/SC 9
ISO 307:2007/Amd 1:2013
Corrections, and update to reference to JIS K 6920-2
60.60 83.080.20ISO/TC 61/SC 9
ISO 308:1994
Plastics -- Phenolic moulding materials -- Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
90.93 83.080.10ISO/TC 61/SC 12
ISO 458-1:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 1: General method
90.93 83.080.01ISO/TC 61/SC 2
ISO 458-2:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
90.93 83.080.20ISO/TC 61/SC 2
ISO 472:2013
Plastics -- Vocabulary
60.60 83.080.01
01.040.83
ISO/TC 61/SC 1
ISO 483:2005
Plastics -- Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
90.93 83.200ISO/TC 61/SC 6
ISO 489:1999
Plastics -- Determination of refractive index
90.93 83.080.01ISO/TC 61/SC 5
ISO 527-1:2012
Plastics -- Determination of tensile properties -- Part 1: General principles
60.60 83.080.01ISO/TC 61/SC 2
ISO 527-2:2012
Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics
60.60 83.080.01ISO/TC 61/SC 2
ISO 527-3:1995
Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets
90.93 83.140.10ISO/TC 61/SC 11
ISO 527-3:1995/Cor 1:1998
60.60 83.140.10ISO/TC 61/SC 2
ISO 527-3:1995/Cor 2:2001
60.60 83.140.10ISO/TC 61/SC 11
ISO 527-4:1997
Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
90.92 83.120ISO/TC 61/SC 13
ISO 527-5:2009
Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
90.20 83.120ISO/TC 61/SC 13
ISO 584:1982
Plastics -- Unsaturated polyester resins -- Determination of reactivity at 80 degrees C (conventional method)
90.93 83.080.10ISO/TC 61/SC 12
ISO 585:1990
Plastics -- Unplasticized cellulose acetate -- Determination of moisture content
90.93 83.080.20ISO/TC 61/SC 9
ISO 604:2002
Plastics -- Determination of compressive properties
90.93 83.080.01ISO/TC 61/SC 2
ISO 844:2007
Rigid cellular plastics -- Determination of compression properties
90.92 83.100ISO/TC 61/SC 10
ISO 845:2006
Cellular plastics and rubbers -- Determination of apparent density
90.93 83.100ISO/TC 61/SC 10
ISO 846:1997
Plastics -- Evaluation of the action of microorganisms
90.92 83.080.01
07.100.99
ISO/TC 61/SC 6
ISO 868:2003
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
90.93 83.080.01ISO/TC 61/SC 2
ISO 871:2006
Plastics -- Determination of ignition temperature using a hot-air furnace
90.93 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 877-1:2009
Plastics -- Methods of exposure to solar radiation -- Part 1: General guidance
90.20 83.080.01ISO/TC 61/SC 6
ISO 877-2:2009
Plastics -- Methods of exposure to solar radiation -- Part 2: Direct weathering and exposure behind window glass
90.20 83.080.01ISO/TC 61/SC 6
ISO 877-3:2009
Plastics -- Methods of exposure to solar radiation -- Part 3: Intensified weathering using concentrated solar radiation
90.20 83.080.01ISO/TC 61/SC 6
ISO 899-1:2003
Plastics -- Determination of creep behaviour -- Part 1: Tensile creep
90.93 83.080.01ISO/TC 61/SC 2
ISO 899-2:2003
Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
90.93 83.080.01ISO/TC 61/SC 2
ISO 974:2000
Plastics -- Determination of the brittleness temperature by impact
90.93 83.080.01ISO/TC 61/SC 2
ISO 1043-1:2011
Plastics -- Symbols and abbreviated terms -- Part 1: Basic polymers and their special characteristics
60.60 83.080.01ISO/TC 61/SC 1
ISO 1043-2:2011
Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials
60.60 83.040.30
83.080.01
ISO/TC 61/SC 1
ISO 1043-3:1996
Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers
90.92 83.040.30
83.080.01
ISO/TC 61/SC 1
ISO 1043-4:1998
Plastics -- Symbols and abbreviated terms -- Part 4: Flame retardants
90.92 83.080.01
83.040.30
ISO/TC 61/SC 1
ISO 1060-1:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 1060-2:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 1061:1990
Plastics -- Unplasticized cellulose acetate -- Determination of free acidity
90.93 83.080.20ISO/TC 61/SC 9
ISO 1068:1975
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of compacted apparent bulk density
90.93 83.080.20ISO/TC 61/SC 9
ISO 1110:1995
Plastics -- Polyamides -- Accelerated conditioning of test specimens
90.93 83.080.20ISO/TC 61/SC 9
ISO 1133-1:2011
Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method
60.60 83.080.20ISO/TC 61/SC 5
ISO 1133-2:2011
Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2: Method for materials sensitive to time-temperature history and/or moisture
60.60 83.080.20ISO/TC 61/SC 5
ISO 1147:1995
Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test
90.93 83.080.01
83.040.10
ISO/TC 61/SC 9
ISO 1158:1998
Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
90.93 83.080.20ISO/TC 61/SC 9
ISO 1163-1:1995
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 1163-2:1995
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 1172:1996
Textile-glass-reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination methods
90.93 83.120ISO/TC 61/SC 13
ISO 1183-1:2012
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method
60.60 83.080.01ISO/TC 61/SC 5
ISO 1183-2:2004
Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
90.93 83.080.01ISO/TC 61/SC 5
ISO 1183-3:1999
Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pyknometer method
90.93 83.080.01ISO/TC 61/SC 5
ISO 1209-1:2007
Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test
90.93 83.100ISO/TC 61/SC 10
ISO 1209-2:2007
Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
90.93 83.100ISO/TC 61/SC 10
ISO 1264:1980
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of pH of aqueous extract
90.93 83.080.20ISO/TC 61/SC 9
ISO 1265:2007
Plastics -- Poly(vinyl chloride) resins -- Determination of number of impurities and foreign particles
90.93 83.080.20ISO/TC 61/SC 9
ISO 1268-1:2001
Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions
90.93 83.120ISO/TC 61/SC 13
ISO 1268-2:2001
Fibre-reinforced plastics -- Methods of producing test plates -- Part 2: Contact and spray-up moulding
90.93 83.120ISO/TC 61/SC 13
ISO 1268-3:2000
Fibre-reinforced plastics -- Methods of producing test plates -- Part 3: Wet compression moulding
90.93 83.120ISO/TC 61/SC 13
ISO 1268-4:2005
Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs
90.93 83.120ISO/TC 61/SC 13
ISO 1268-4:2005/Amd 1:2010
60.60 83.120ISO/TC 61/SC 13
ISO 1268-5:2001
Fibre-reinforced plastics -- Methods of producing test plates -- Part 5: Filament winding
90.93 83.120ISO/TC 61/SC 13
ISO 1268-6:2002
Fibre-reinforced plastics -- Methods of producing test plates -- Part 6: Pultrusion moulding
90.93 83.120ISO/TC 61/SC 13
ISO 1268-7:2001
Fibre-reinforced plastics -- Methods of producing test plates -- Part 7: Resin transfer moulding
90.92 83.120ISO/TC 61/SC 13
ISO 1268-8:2004
Fibre-reinforced plastics -- Methods of producing test plates -- Part 8: Compression moulding of SMC and BMC
90.93 83.120ISO/TC 61/SC 13
ISO 1268-9:2003
Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC
90.93 83.120ISO/TC 61/SC 13
ISO 1268-10:2005
Fibre-reinforced plastics -- Methods of producing test plates -- Part 10: Injection moulding of BMC and other long-fibre moulding compounds -- General principles and moulding of multipurpose test specimens
90.93 83.120ISO/TC 61/SC 13
ISO 1268-11:2005
Fibre-reinforced plastics -- Methods of producing test plates -- Part 11: Injection moulding of BMC and other long-fibre moulding compounds -- Small plates
90.93 83.120ISO/TC 61/SC 13
ISO 1269:2006
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water)
90.20 83.080.20ISO/TC 61/SC 9
ISO 1598:1990
Plastics - Cellulose acetate -- Determination of insoluble particles
90.93 83.080.20ISO/TC 61/SC 9
ISO 1599:1990
Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding
90.93 83.080.20ISO/TC 61/SC 9
ISO 1600:1990
Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating
90.93 83.080.20ISO/TC 61/SC 9
ISO 1622-1:2012
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 83.080.20ISO/TC 61/SC 9
ISO 1622-2:1995
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 1624:2001
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water
90.93 83.080.20ISO/TC 61/SC 9
ISO 1628-1:2009
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
90.20 83.080.01ISO/TC 61/SC 5
ISO 1628-1:2009/Amd 1:2012
60.60 83.080.01ISO/TC 61/SC 5
ISO 1628-2:1998
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly(vinyl chloride) resins
90.93 83.080.20ISO/TC 61/SC 9
ISO 1628-3:2010
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 3: Polyethylenes and polypropylenes
60.60 83.080.20ISO/TC 61/SC 9
ISO 1628-4:1999
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
90.93 83.080.20ISO/TC 61/SC 9
ISO 1628-5:1998
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
90.93 83.080.10ISO/TC 61/SC 9
ISO 1628-6:1990
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers
90.93 83.080.20ISO/TC 61/SC 9
ISO 1663:2007
Rigid cellular plastics -- Determination of water vapour transmission properties
90.93 83.100ISO/TC 61/SC 10
ISO 1675:1985
Plastics -- Liquid resins -- Determination of density by the pyknometer method
90.93 83.080.01ISO/TC 61/SC 5
ISO 1872-1:1993
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 1872-2:2007
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 1873-1:1995
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 83.080.20ISO/TC 61/SC 9
ISO 1873-2:2007
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 1874-1:2010
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system and basis for specification
90.92 83.080.20ISO/TC 61/SC 9
ISO 1874-2:2012
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 83.080.20ISO/TC 61/SC 9
ISO 1875:1982
Plastics -- Plasticized cellulose acetate -- Determination of matter extractable by diethyl ether
90.93 83.080.20ISO/TC 61/SC 9
ISO 1887:1995
Textile glass -- Determination of combustible-matter content
90.92 59.100.10ISO/TC 61/SC 13
ISO 1888:2006
Textile glass -- Staple fibres or filaments -- Determination of average diameter
90.93 59.100.10ISO/TC 61/SC 13
ISO 1889:2009
Reinforcement yarns -- Determination of linear density
90.20 59.100.01ISO/TC 61/SC 13
ISO 1890:2009
Reinforcement yarns -- Determination of twist
90.20 59.100.01ISO/TC 61/SC 13
ISO 1922:2012
Rigid cellular plastics -- Determination of shear strength
90.92 83.100ISO/TC 61/SC 10
ISO 1923:1981
Cellular plastics and rubbers -- Determination of linear dimensions
90.93 83.100ISO/TC 61/SC 10
ISO 1926:2009
Rigid cellular plastics -- Determination of tensile properties
60.60 83.100ISO/TC 61/SC 10
ISO 2039-1:2001
Plastics -- Determination of hardness -- Part 1: Ball indentation method
90.93 83.080.01ISO/TC 61/SC 2
ISO 2039-2:1987
Plastics -- Determination of hardness -- Part 2: Rockwell hardness
90.93 83.080.01ISO/TC 61/SC 2
ISO 2078:1993
Textile glass -- Yarns -- Designation
90.92 59.100.10ISO/TC 61/SC 13
ISO 2113:1996
Reinforcement fibres -- Woven fabrics -- Basis for a specification
90.93 59.100.01ISO/TC 61/SC 13
ISO 2113:1996/Cor 1:2003
60.60 59.100.01ISO/TC 61/SC 13
ISO 2114:2000
Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value
90.93 83.080.10
87.060.20
ISO/TC 61/SC 12
ISO 2115:1996
Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
90.93 83.080.01
83.040.10
ISO/TC 61/SC 9
ISO 2535:2001
Plastics -- Unsaturated-polyester resins -- Measurement of gel time at ambient temperature
90.93 83.080.10ISO/TC 61/SC 12
ISO 2554:1997
Plastics -- Unsaturated polyester resins -- Determination of hydroxyl value
90.93 83.080.10ISO/TC 61/SC 12
ISO 2555:1989
Plastics -- Resins in the liquid state or as emulsions or dispersions -- Determination of apparent viscosity by the Brookfield Test method
90.93 83.080.01ISO/TC 61/SC 5
ISO 2556:1974
Plastics -- Determination of the gas transmission rate of films and thin sheets under atmospheric pressure -- Manometric method
90.93 83.140.10ISO/TC 61/SC 5
ISO 2558:2010
Textile glass chopped-strand mats for reinforcement of plastics -- Determination of time of dissolution of the binder in styrene
60.60 59.100.10ISO/TC 61/SC 13
ISO 2559:2011
Textile glass -- Mats (made from chopped or continuous strands) -- Designation and basis for specifications
60.60 59.100.10ISO/TC 61/SC 13
ISO 2561:2012
Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
60.60 83.080.20ISO/TC 61/SC 9
ISO 2577:2007
Plastics -- Thermosetting moulding materials -- Determination of shrinkage
90.93 83.080.10ISO/TC 61/SC 12
ISO 2578:1993
Plastics -- Determination of time-temperature limits after prolonged exposure to heat
90.93 83.080.01ISO/TC 61/SC 6
ISO 2580-1:2002
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 83.080.20ISO/TC 61/SC 9
ISO 2580-2:2003
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 2796:1986
Cellular plastics, rigid -- Test for dimensional stability
90.93 83.100ISO/TC 61/SC 10
ISO 2797:1986
Textile glass -- Rovings -- Basis for a specification
90.93 59.100.10ISO/TC 61/SC 13
ISO 2818:1994
Plastics -- Preparation of test specimens by machining
90.93 83.080.01ISO/TC 61/SC 9
ISO 2818:1994/Cor 1:2007
60.60 83.080.01ISO/TC 61/SC 9
ISO 2896:2001
Rigid cellular plastics -- Determination of water absorption
90.93 83.100ISO/TC 61/SC 10
ISO 2897-1:1997
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 83.080.20ISO/TC 61/SC 9
ISO 2897-2:2003
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 2898-1:1996
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 2898-2:2008
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 3001:1999
Plastics -- Epoxy compounds -- Determination of epoxy equivalent
90.20 83.080.10ISO/TC 61/SC 12
ISO 3146:2000
Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
90.93 83.080.01ISO/TC 61/SC 5
ISO 3146:2000/Cor 1:2002
60.60 83.080.01ISO/TC 61/SC 5
ISO 3167:2002
Plastics -- Multipurpose test specimens
90.92 83.080.01ISO/TC 61/SC 2
ISO 3219:1993
Plastics -- Polymers/resins in the liquid state or as emulsions or dispersions -- Determination of viscosity using a rotational viscometer with defined shear rate
90.20 83.080.01ISO/TC 61/SC 5
ISO 3341:2000
Textile glass -- Yarns -- Determination of breaking force and breaking elongation
90.93 59.100.10ISO/TC 61/SC 13
ISO 3342:2011
Textile glass -- Mats -- Determination of tensile breaking force
60.60 59.100.10ISO/TC 61/SC 13
ISO 3343:2010
Reinforcement yarns -- Determination of twist balance index
60.60 59.100.10ISO/TC 61/SC 13
ISO 3344:1997
Reinforcement products -- Determination of moisture content
90.93 59.100.01ISO/TC 61/SC 13
ISO 3374:2000
Reinforcement products -- Mats and fabrics -- Determination of mass per unit area
90.93 59.100.10ISO/TC 61/SC 13
ISO 3375:2009
Textile glass -- Determination of stiffness of rovings
60.60 59.100.10ISO/TC 61/SC 13
ISO 3451-1:2008
Plastics -- Determination of ash -- Part 1: General methods
90.93 83.080.01ISO/TC 61/SC 5
ISO 3451-2:1998
Plastics -- Determination of ash -- Part 2: Poly(alkylene terephthalate) materials
90.93 83.080.20ISO/TC 61/SC 5
ISO 3451-3:1984
Plastics -- Determination of ash -- Part 3: Unplasticized cellulose acetate
90.93 83.080.20ISO/TC 61/SC 5
ISO 3451-4:1998
Plastics -- Determination of ash -- Part 4: Polyamides
90.93 83.080.20ISO/TC 61/SC 5
ISO 3451-5:2002
Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride)
90.93 83.080.20ISO/TC 61/SC 5
ISO 3521:1997
Plastics -- Unsaturated polyester and epoxy resins -- Determination of overall volume shrinkage
90.93 83.080.10ISO/TC 61/SC 12
ISO 3521:1997/Cor 1:2003
60.60 83.080.10ISO/TC 61/SC 12
ISO 3597-1:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 1: General considerations and preparation of rods
90.93 59.100.10
83.120
ISO/TC 61/SC 13
ISO 3597-2:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 2: Determination of flexural strength
90.93 83.120
59.100.10
ISO/TC 61/SC 13
ISO 3597-3:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength
90.93 59.100.10
83.120
ISO/TC 61/SC 13
ISO 3597-4:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 4: Determination of apparent interlaminar shear strength
90.93 59.100.10
83.120
ISO/TC 61/SC 13
ISO 3598:2011
Textile glass -- Yarns -- Basis for a specification
60.60 59.100.10ISO/TC 61/SC 13
ISO 3616:2001
Textile glass -- Chopped-strand and continuous-filament mats -- Determination of average thickness, thickness under load and recovery after compression
90.93 59.100.10ISO/TC 61/SC 13
ISO 3671:1976
Plastics -- Aminoplastic moulding materials -- Determination of volatile matter
90.93 83.080.10ISO/TC 61/SC 12
ISO 3672-1:2000
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 1: Designation system
90.93 83.080.10ISO/TC 61/SC 12
ISO 3672-2:2000
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.10ISO/TC 61/SC 12
ISO 3673-1:1996
Plastics -- Epoxy resins -- Part 1: Designation
90.93 83.080.10ISO/TC 61/SC 12
ISO 3673-2:2012
Plastics -- Epoxy resins -- Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
60.60 83.080.10ISO/TC 61/SC 12
ISO 3915:1981
Plastics -- Measurement of resistivity of conductive plastics
90.93 83.080.01ISO/TC 61/SC 5
ISO 4574:1978
Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption
90.93 83.080.20ISO/TC 61/SC 9
ISO 4575:2007
Plastics -- Poly(vinyl chloride) pastes -- Determination of apparent viscosity using the Severs rheometer
90.93 83.080.20ISO/TC 61/SC 9
ISO 4576:1996
Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content)
90.93 83.080.01ISO/TC 61/SC 9
ISO 4577:1983
Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method
90.93 83.080.20ISO/TC 61/SC 9
ISO 4578:1997
Adhesives -- Determination of peel resistance of high-strength adhesive bonds -- Floating-roller method
90.93 83.180ISO/TC 61/SC 11
ISO 4581:1994
Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method
90.93 83.080.20ISO/TC 61/SC 5
ISO 4582:2007
Plastics -- Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
90.93 83.080.01ISO/TC 61/SC 6
ISO 4586-1:2004
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 1: Classification and specifications
90.92 83.140.20ISO/TC 61/SC 11
ISO 4586-2:2004
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 2: Determination of properties
90.92 83.140.20ISO/TC 61/SC 11
ISO 4587:2003
Adhesives -- Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
90.93 83.180ISO/TC 61/SC 11
ISO 4589-1:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance
90.92 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 4589-2:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
90.92 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 4589-2:1996/Amd 1:2005
60.60 13.220.40
83.080.01
ISO/TC 61/SC 4
ISO 4589-3:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
90.92 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 4590:2002
Rigid cellular plastics -- Determination of the volume percentage of open cells and of closed cells
90.92 83.100ISO/TC 61/SC 10
ISO 4591:1992
Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
90.93 83.140.10ISO/TC 61/SC 11
ISO 4592:1992
Plastics -- Film and sheeting -- Determination of length and width
90.93 83.140.10ISO/TC 61/SC 11
ISO 4593:1993
Plastics -- Film and sheeting -- Determination of thickness by mechanical scanning
90.20 83.140.10ISO/TC 61/SC 11
ISO 4597-1:2005
Plastics -- Hardeners and accelerators for epoxy resins -- Part 1: Designation
90.93 83.080.10ISO/TC 61/SC 12
ISO 4602:2010
Reinforcements -- Woven fabrics -- Determination of number of yarns per unit length of warp and weft
60.60 59.100.01ISO/TC 61/SC 13
ISO 4603:1993
Textile glass -- Woven fabrics -- Determination of thickness
90.93 59.100.10ISO/TC 61/SC 13
ISO 4603:1993/Amd 1:2010
60.60 59.100.10ISO/TC 61/SC 13
ISO 4604:2011
Reinforcement fabrics -- Determination of conventional flexural stiffness -- Fixed-angle flexometer method
60.60 59.100.10ISO/TC 61/SC 13
ISO 4606:1995
Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at break by the strip method
90.93 59.100.10ISO/TC 61/SC 13
ISO 4608:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride for general use -- Determination of plasticizer absorption at room temperature
90.93 83.080.20ISO/TC 61/SC 9
ISO 4610:2001
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus
90.93 83.080.20ISO/TC 61/SC 9
ISO 4611:2010
Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist
60.60 83.080.01ISO/TC 61/SC 6
ISO 4612:1999
Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method
90.93 83.080.20ISO/TC 61/SC 9
ISO 4613-1:1993
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 1: Designation and specification
90.93 83.080.20ISO/TC 61/SC 9
ISO 4613-2:1995
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 4613-2:1995/Amd 1:2004
60.60 83.080.20ISO/TC 61/SC 9
ISO 4614:1977
Plastics -- Melamine-formaldehyde mouldings -- Determination of extractable formaldehyde
90.93 83.080.10ISO/TC 61/SC 12
ISO 4615:1979
Plastics -- Unsaturated polyesters and epoxide resins -- Determination of total chlorine content
90.93 83.080.10ISO/TC 61/SC 12
ISO 4892-1:1999
Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance
90.92 83.080.01ISO/TC 61/SC 6
ISO 4892-2:2013
Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps
60.60 83.080.01ISO/TC 61/SC 6
ISO 4892-3:2013
Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
60.60 83.080.01ISO/TC 61/SC 6
ISO 4892-4:2013
Plastics -- Methods of exposure to laboratory light sources -- Part 4: Open-flame carbon-arc lamps
60.60 83.080.01ISO/TC 61/SC 6
ISO 4894-1:1997
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 83.080.20ISO/TC 61/SC 9
ISO 4894-2:1995
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 4895:1997
Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize
90.92 83.080.10ISO/TC 61/SC 12
ISO 4897:1985
Cellular plastics -- Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
90.93 83.100ISO/TC 61/SC 10
ISO 4898:2010
Rigid cellular plastics -- Thermal insulation products for buildings -- Specifications
60.60 91.100.60
83.100
ISO/TC 61/SC 10
ISO 4899:1993
Textile-glass-reinforced thermosetting plastics -- Properties and test methods
90.93 83.120ISO/TC 61/SC 13
ISO 4900:2011
Textile glass -- Mats and fabrics -- Determination of contact mouldability
60.60 59.100.10ISO/TC 61/SC 13
ISO 4901:2011
Reinforced plastics based on unsaturated-polyester resins -- Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
60.60 83.120ISO/TC 61/SC 12
ISO 5025:1997
Reinforcement products -- Woven fabrics -- Determination of width and length
90.92 59.100.10ISO/TC 61/SC 13
ISO 5659-2:2012
Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
90.92 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 6186:1998
Plastics -- Determination of pourability
90.93 83.080.20ISO/TC 61/SC 9
ISO 6187:2001
Rigid cellular plastics -- Determination of friability
90.93 83.100ISO/TC 61/SC 10
ISO 6237:2003
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by tensile loading
90.92 83.180ISO/TC 61/SC 11
ISO 6238:2001
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by compressive loading
90.93 83.180ISO/TC 61/SC 11
ISO 6383-1:1983
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1: Trouser tear method
90.20 83.140.10ISO/TC 61/SC 11
ISO 6383-2:1983
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 2: Elmendorf method
90.20 83.140.10ISO/TC 61/SC 11
ISO 6401:2008
Plastics -- Poly(vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method
90.93 83.080.20ISO/TC 61/SC 5
ISO 6402-1:2002
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 83.080.20ISO/TC 61/SC 9
ISO 6402-2:2003
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 6427:2013
Plastics -- Determination of matter extractable by organic solvents (conventional methods)
60.60 83.080.01ISO/TC 61/SC 5
ISO 6601:2002
Plastics -- Friction and wear by sliding -- Identification of test parameters
90.93 83.080.01ISO/TC 61/SC 2
ISO 6603-1:2000
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing
90.93 83.080.01ISO/TC 61/SC 2
ISO 6603-2:2000
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
90.93 83.080.01ISO/TC 61/SC 2
ISO 6721-1:2011
Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles
60.60 83.080.01ISO/TC 61/SC 2
ISO 6721-2:2008
Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method
90.93 83.080.01ISO/TC 61/SC 2
ISO 6721-3:1994
Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method
90.20 83.080.01ISO/TC 61/SC 2
ISO 6721-3:1994/Cor 1:1995
60.60 83.080.01ISO/TC 61/SC 2
ISO 6721-4:2008
Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method
90.93 83.080.01ISO/TC 61/SC 2
ISO 6721-5:1996
Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method
90.93 83.080.01ISO/TC 61/SC 2
ISO 6721-5:1996/Amd 1:2007
60.60 83.080.01ISO/TC 61/SC 2
ISO 6721-6:1996
Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method
90.93 83.080.01ISO/TC 61/SC 2
ISO 6721-6:1996/Amd 1:2007
60.60 83.080.01ISO/TC 61/SC 2
ISO 6721-7:1996
Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method
90.93 83.080.01ISO/TC 61/SC 2
ISO 6721-7:1996/Amd 1:2007
60.60 83.080.01ISO/TC 61/SC 2
ISO 6721-8:1997
Plastics -- Determination of dynamic mechanical properties -- Part 8: Longitudinal and shear vibration -- Wave-propagation method
90.93 83.080.01ISO/TC 61/SC 2
ISO 6721-9:1997
Plastics -- Determination of dynamic mechanical properties -- Part 9: Tensile vibration -- Sonic-pulse propagation method
90.93 83.080.01ISO/TC 61/SC 2
ISO 6721-9:1997/Amd 1:2007
Precision
60.60 83.080.01ISO/TC 61/SC 2
ISO 6721-10:1999
Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
90.92 83.080.01ISO/TC 61/SC 2
ISO 6721-11:2012
Plastics -- Determination of dynamic mechanical properties -- Part 11: Glass transition temperature
60.60 83.080.01ISO/TC 61/SC 2
ISO 6721-12:2009
Plastics -- Determination of dynamic mechanical properties -- Part 12: Compressive vibration -- Non-resonance method
90.20 83.080.01ISO/TC 61/SC 2
ISO 7059:1982
Caprolactam for industrial use -- Determination of absorbance at a wavelength of 290 nm
90.93 71.080.30ISO/TC 61/SC 5
ISO 7214:2012
Cellular plastics -- Polyethylene -- Methods of test
90.92 83.100ISO/TC 61/SC 10
ISO 7327:1994
Plastics -- Hardeners and accelerators for epoxide resins -- Determination of free acid in acid anhydride
90.20 83.080.10ISO/TC 61/SC 12
ISO 7391-1:2006
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 7391-2:2006
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 7616:1986
Cellular plastics, rigid -- Determination of compressive creep under specified load and temperature conditions
90.93 83.100ISO/TC 61/SC 10
ISO 7765-1:1988
Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 1: Staircase methods
90.20 83.140.10ISO/TC 61/SC 11
ISO 7765-2:1994
Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 2: Instrumented puncture test
90.20 83.140.10ISO/TC 61/SC 11
ISO 7792-1:2012
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 83.080.20ISO/TC 61/SC 9
ISO 7792-2:2012
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 83.080.20ISO/TC 61/SC 9
ISO 7808:1992
Plastics -- Thermosetting moulding materials -- Determination of transfer flow
90.93 83.080.10ISO/TC 61/SC 12
ISO 7822:1990
Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods
90.93 83.120ISO/TC 61/SC 13
ISO 7823-1:2003
Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 1: Cast sheets
90.93 83.140.10ISO/TC 61/SC 11
ISO 7823-2:2003
Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 2: Extruded sheets
90.93 83.140.10ISO/TC 61/SC 11
ISO 7823-3:2007
Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 3: Continuous cast sheets
90.93 83.140.10ISO/TC 61/SC 11
ISO 7850:1986
Cellular plastics, rigid -- Determination of compressive creep
90.93 83.100ISO/TC 61/SC 10
ISO 8112:1984
Caprolactam for industrial use -- Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) -- Spectrometric method
90.93 71.080.30ISO/TC 61/SC 5
ISO 8256:2004
Plastics -- Determination of tensile-impact strength
90.93 83.080.01ISO/TC 61/SC 2
ISO 8257-1:1998
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 8257-2:2001
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 8295:1995
Plastics -- Film and sheeting -- Determination of the coefficients of friction
90.93 83.140.10ISO/TC 61/SC 11
ISO 8296:2003
Plastics -- Film and sheeting -- Determination of wetting tension
90.93 83.140.10ISO/TC 61/SC 11
ISO 8510-2:2006
Adhesives -- Peel test for a flexible-bonded-to-rigid test specimen assembly -- Part 2: 180 degree peel
90.20 83.180ISO/TC 61/SC 11
ISO 8516:2011
Textile glass -- Textured yarns -- Basis for a specification
60.60 59.100.10ISO/TC 61/SC 13
ISO 8570:1991
Plastics -- Film and sheeting - Determination of cold-crack temperature
90.93 83.140.10ISO/TC 61/SC 11
ISO 8604:1988
Plastics -- Prepregs -- Definitions of terms and symbols for designations
90.93 83.120
01.040.83
ISO/TC 61/SC 1
ISO 8605:2001
Textile-glass-reinforced plastics -- Sheet moulding compound (SMC) -- Basis for a specification
90.93 83.120ISO/TC 61/SC 13
ISO 8606:1990
Plastics -- Prepregs -- Bulk moulding compound (BMC) and dough moulding compound (DMC) -- Basis for a specification
90.93 83.120ISO/TC 61/SC 13
ISO 8619:2003
Plastics -- Phenolic resin powder -- Determination of flow distance on a heated glass plate
90.93 83.080.10ISO/TC 61/SC 12
ISO 8660:2002
Plastics -- Determination of permanganate absorption number of caprolactam -- Spectrometric method
90.93 71.080.30
83.080.01
ISO/TC 61/SC 5
ISO 8661:1988
Caprolactam for industrial use -- Determination of volatile bases content -- Titrimetric method after distillation
90.93 71.080.30ISO/TC 61/SC 5
ISO 8873-1:2006
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 1: Material specifications
90.93 83.100ISO/TC 61/SC 10
ISO 8873-2:2007
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 2: Application
90.93 83.100ISO/TC 61/SC 10
ISO 8873-3:2007
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 3: Test methods
90.93 83.100ISO/TC 61/SC 10
ISO 8974:2002
Plastics -- Phenolic resins -- Determination of residual phenol content by gas chromatography
90.93 83.080.10ISO/TC 61/SC 12
ISO 8975:1989
Plastics -- Phenolic resins -- Determination of pH
90.20 83.080.10ISO/TC 61/SC 12
ISO 8985:1998
Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content
90.93 83.080.20ISO/TC 61/SC 9
ISO 8986-1:2009
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 83.080.20ISO/TC 61/SC 9
ISO 8986-2:2009
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 83.080.20ISO/TC 61/SC 9
ISO 8987:2005
Plastics -- Phenolic resins -- Determination of reactivity on a B-transformation test plate
90.93 83.080.10ISO/TC 61/SC 12
ISO 8988:2006
Plastics -- Phenolic resins -- Determination of hexamethylenetetramine content -- Kjeldahl method, perchloric acid method and hydrochloric acid method
90.20 83.080.10ISO/TC 61/SC 12
ISO 8989:1995
Plastics -- Liquid phenolic resins -- Determination of water miscibility
90.93 83.080.10ISO/TC 61/SC 12
ISO 9054:1990
Cellular plastics, rigid -- Test methods for self-skinned, high-density materials
90.93 83.100ISO/TC 61/SC 10
ISO 9113:1986
Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Determination of isotactic index
90.93 83.080.20ISO/TC 61/SC 9
ISO 9142:2003
Adhesives -- Guide to the selection of standard laboratory ageing conditions for testing bonded joints
90.93 83.180ISO/TC 61/SC 11
ISO 9163:2005
Textile glass -- Rovings -- Manufacture of test specimens and determination of tensile strength of impregnated rovings
90.93 59.100.10ISO/TC 61/SC 13
ISO 9352:2012
Plastics -- Determination of resistance to wear by abrasive wheels
60.60 83.080.01ISO/TC 61/SC 2
ISO 9370:2009
Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method
90.20 83.080.01ISO/TC 61/SC 6
ISO 9396:1997
Plastics -- Phenolic resins -- Determination of the gel time of resols under specific conditions using automatic apparatus
90.93 83.080.10ISO/TC 61/SC 12
ISO 9653:1998
Adhesives -- Test method for shear impact strength of adhesive bonds
90.93 83.180ISO/TC 61/SC 11
ISO 9664:1993
Adhesives -- Test methods for fatigue properties of structural adhesives in tensile shear
90.93 83.180ISO/TC 61/SC 11
ISO 9665:1998
Adhesives -- Animal glues -- Methods of sampling and testing
90.93 83.180ISO/TC 61/SC 11
ISO 9702:1996
Plastics -- Amine epoxide hardeners -- Determination of primary, secondary and tertiary amine group nitrogen content
90.93 83.080.10ISO/TC 61/SC 12
ISO 9771:1995
Plastics -- Phenolic resins -- Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
90.93 83.080.10ISO/TC 61/SC 12
ISO 9772:2012
Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame
60.60 83.100
13.220.40
ISO/TC 61/SC 4
ISO 9773:1998
Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
90.92 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 9773:1998/Amd 1:2003
Specimens
60.60 13.220.40
83.080.01
ISO/TC 61/SC 4
ISO 9774:2004
Thermal insulation for building applications -- Guidelines for selecting properties
90.93 83.100
91.100.60
ISO/TC 61/SC 10
ISO 9782:1993
Plastics -- Reinforced moulding compounds and prepregs -- Determination of apparent volatile-matter content
90.93 83.120ISO/TC 61/SC 13
ISO 9944:1990
Plastics -- Phenolic resins -- Determination of electrical conductivity of resin extracts
90.93 83.080.10ISO/TC 61/SC 12
ISO 9944:1990/Cor 1:1997
60.60 83.080.10ISO/TC 61/SC 12
ISO 9988-1:2004
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 9988-2:2006
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 9994:2005
Lighters -- Safety specification
90.92 97.180ISO/TC 61/SC 4
ISO 9994:2005/Amd 1:2008
Clarification of structural requirements
60.60 97.180ISO/TC 61
ISO 10082:1999
Plastics -- Phenolic resins -- Classification and test methods
90.20 83.080.10ISO/TC 61/SC 12
ISO 10093:1998
Plastics -- Fire tests -- Standard ignition sources
90.92 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 10119:2002
Carbon fibre -- Determination of density
90.93 59.100.20ISO/TC 61/SC 13
ISO 10122:1995
Reinforcement materials -- Tubular braided sleeves -- Basis for a specification
90.92 59.100.01ISO/TC 61/SC 13
ISO 10123:2013
Adhesives -- Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
60.60 83.180ISO/TC 61/SC 11
ISO 10210:2012
Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials
60.60 83.080.01ISO/TC 61/SC 5
ISO 10350-1:2007
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
90.93 83.080.20ISO/TC 61/SC 2
ISO 10350-2:2011
Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics
60.60 83.120ISO/TC 61/SC 2
ISO 10352:2010
Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of mass per unit area
60.60 83.120ISO/TC 61/SC 13
ISO 10354:1992
Adhesives -- Characterization of durability of structural-adhesive-bonded assemblies -- Wedge rupture test
90.93 83.180ISO/TC 61/SC 11
ISO 10363:1992
Hot-melt adhesives -- Determination of thermal stability
90.93 83.180ISO/TC 61/SC 11
ISO 10364:2007
Structural adhesives -- Determination of the pot life (working life) of multi-component adhesives
90.92 83.180ISO/TC 61/SC 11
ISO 10365:1992
Adhesives -- Designation of main failure patterns
90.93 83.180ISO/TC 61/SC 11
ISO 10366-1:2002
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 83.080.20ISO/TC 61/SC 9
ISO 10366-2:2003
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 10371:1993
Reinforcement materials -- Braided tapes -- Basis for a specification
90.93 59.100.01ISO/TC 61/SC 13
ISO 10548:2002
Carbon fibre -- Determination of size content
90.92 59.100.20ISO/TC 61/SC 13
ISO 10548:2002/Cor 1:2008
60.60 59.100.20ISO/TC 61/SC 13
ISO 10618:2004
Carbon fibre -- Determination of tensile properties of resin-impregnated yarn
90.93 59.100.20ISO/TC 61/SC 13
ISO 10640:2011
Plastics -- Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
60.60 83.080.01ISO/TC 61/SC 6
ISO 10724-1:1998
Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 1: General principles and moulding of multipurpose test specimens
90.93 83.080.10ISO/TC 61/SC 12
ISO 10724-2:1998
Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 2: Small plates
90.93 83.080.10ISO/TC 61/SC 12
ISO 10840:2008
Plastics -- Guidance for the use of standard fire tests
90.93 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 10927:2011
Plastics -- Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
60.60 83.080.01ISO/TC 61/SC 5
ISO 10964:1993
Adhesives -- Determination of torque strength of anaerobic adhesives on threaded fasteners
90.93 83.180ISO/TC 61/SC 11
ISO 11003-1:2001
Adhesives -- Determination of shear behaviour of structural adhesives -- Part 1: Torsion test method using butt-bonded hollow cylinders
90.93 83.180ISO/TC 61/SC 11
ISO 11003-2:2001
Adhesives -- Determination of shear behaviour of structural adhesives -- Part 2: Tensile test method using thick adherends
90.93 83.180ISO/TC 61/SC 11
ISO 11248:1993
Plastics -- Thermosetting moulding materials -- Evaluation of short-term performance at elevated temperatures
90.93 83.080.10ISO/TC 61/SC 12
ISO 11337:2010
Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography
60.60 83.080.20ISO/TC 61/SC 5
ISO 11339:2010
Adhesives -- T-peel test for flexible-to-flexible bonded assemblies
60.60 83.180ISO/TC 61/SC 11
ISO 11343:2003
Adhesives -- Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions -- Wedge impact method
90.93 83.180ISO/TC 61/SC 11
ISO 11357-1:2009
Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles
60.60 83.080.01ISO/TC 61/SC 5
ISO 11357-2:2013
Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature and glass transition step height
60.60 83.080.01ISO/TC 61/SC 5
ISO 11357-3:2011
Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization
60.60 83.080.01ISO/TC 61/SC 5
ISO 11357-4:2005
Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity
90.92 83.080.01ISO/TC 61/SC 5
ISO 11357-5:2013
Plastics -- Differential scanning calorimetry (DSC) -- Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
60.60 83.080.01ISO/TC 61/SC 5
ISO 11357-6:2008
Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
90.93 83.080.01ISO/TC 61/SC 5
ISO 11357-7:2002
Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics
90.92 83.080.01ISO/TC 61/SC 5
ISO 11358:1997
Plastics -- Thermogravimetry (TG) of polymers -- General principles
90.92 83.080.01ISO/TC 61/SC 5
ISO 11358-2:2005
Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy
90.92 83.080.01ISO/TC 61/SC 5
ISO 11358-3:2013
Plastics -- Thermogravimetry (TG) of polymers -- Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
60.60 83.080.01ISO/TC 61/SC 5
ISO 11359-1:2014
Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles
60.60 83.080.01ISO/TC 61/SC 5
ISO 11359-2:1999
Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
90.93 83.080.01ISO/TC 61/SC 5
ISO 11359-3:2002
Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature
90.93 83.080.01ISO/TC 61/SC 5
ISO 11401:1993
Plastics -- Phenolic resins -- Separation by liquid chromatography
90.93 83.080.10ISO/TC 61/SC 12
ISO 11402:2004
Phenolic, amino and condensation resins -- Determination of free-formaldehyde content
90.93 83.080.10ISO/TC 61/SC 12
ISO 11403-1:2001
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties
90.92 83.080.01ISO/TC 61/SC 2
ISO 11403-2:2012
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties
60.60 83.080.01ISO/TC 61/SC 2
ISO 11403-3:1999
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties
90.92 83.080.01ISO/TC 61/SC 2
ISO 11409:1993
Plastics -- Phenolic resins -- Determination of heats and temperatures of reaction by differential scanning calorimetry
90.93 83.080.10ISO/TC 61/SC 12
ISO 11443:2014
Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
60.60 83.080.01ISO/TC 61/SC 5
ISO 11468:1997
Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method
90.93 83.080.20ISO/TC 61/SC 9
ISO 11469:2000
Plastics -- Generic identification and marking of plastics products
90.92 83.080.01ISO/TC 61/SC 1
ISO 11501:1995
Plastics -- Film and sheeting -- Determination of dimensional change on heating
90.93 83.140.10ISO/TC 61/SC 11
ISO 11502:1995
Plastics -- Film and sheeting -- Determination of blocking resistance
90.93 83.140.10ISO/TC 61/SC 11
ISO 11542-1:2001
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 11542-2:1998
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 11542-2:1998/Cor 1:2007
60.60 83.080.20ISO/TC 61/SC 9
ISO 11566:1996
Carbon fibre -- Determination of the tensile properties of single-filament specimens
90.93 59.100.20ISO/TC 61/SC 13
ISO 11567:1995
Carbon fibre -- Determination of filament diameter and cross-sectional area
90.93 59.100.20ISO/TC 61/SC 13
ISO 11667:1997
Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of resin, reinforced-fibre and mineral-filler content -- Dissolution methods
90.93 83.120ISO/TC 61/SC 13
ISO 11833-1:2012
Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 1: Sheets of thickness not less than 1 mm
60.60 83.140.10ISO/TC 61/SC 11
ISO 11833-2:1998
Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 2: Sheets of thickness less than 1 mm
90.93 83.140.10ISO/TC 61/SC 11
ISO 11907-1:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 1: Guidance
90.92 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 11907-2:1995
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 2: Static method
90.93 13.220.40
83.080.01
ISO/TC 61/SC 4
ISO 11907-3:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 3: Dynamic decomposition method using a travelling furnace
90.93 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 11907-4:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 4: Dynamic decomposition method using a conical radiant heater
90.93 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 11963:2012
Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics
60.60 83.140.10ISO/TC 61/SC 11
ISO 12000:2000
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods
90.92 83.080.20
83.040.10
ISO/TC 61/SC 9
ISO 12017:1995
Plastics -- Poly(methyl methacrylate) double- and triple-skin sheets -- Test methods
90.93 83.140.10ISO/TC 61/SC 11
ISO 12058-1:1997
Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
90.93 83.080.01ISO/TC 61/SC 5
ISO 12086-1:2006
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 12086-1:2006/Cor 1:2006
60.60 83.080.20ISO/TC 61/SC 9
ISO 12086-2:2006
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 12086-2:2006/Cor 1:2006
60.60 83.080.20ISO/TC 61/SC 9
ISO 12114:1997
Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of cure characteristics
90.93 83.120ISO/TC 61/SC 13
ISO 12115:1997
Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of flowability, maturation and shelf life
90.93 83.120ISO/TC 61/SC 13
ISO 12115:1997/Cor 1:1998
60.60 83.120ISO/TC 61/SC 13
ISO 12418-1:2012
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications
60.60 83.080.20ISO/TC 61/SC 9
ISO 12418-2:2012
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 2: Preparation of test specimens and determination of properties
60.60 83.080.20ISO/TC 61/SC 9
ISO 12815:2013
Fibre-reinforced plastic composites -- Determination of plain-pin bearing strength
60.60 83.120ISO/TC 61/SC 13
ISO 12817:2013
Fibre-reinforced plastic composites -- Determination of open-hole compression strength
60.60 83.120ISO/TC 61/SC 13
ISO 12856-1:2014
Plastics -- Plastic railway sleepers for railway applications (railroad ties) -- Part 1: Material characteristics
60.60 45.080
83.140.99
ISO/TC 61/SC 11
ISO 12992:1995
Plastics -- Vertical flame spread determination for film and sheet
90.92 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 13000-1:2005
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation
90.93 83.140.01ISO/TC 61/SC 9
ISO 13000-2:2005
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties
90.93 83.140.01ISO/TC 61/SC 9
ISO 13002:1998
Carbon fibre -- Designation system for filament yarns
90.93 59.100.20ISO/TC 61/SC 13
ISO 13003:2003
Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions
90.93 83.120ISO/TC 61/SC 13
ISO 13445:2003
Adhesives -- Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
90.93 83.180ISO/TC 61/SC 11
ISO 13468-1:1996
Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single-beam instrument
90.93 83.080.01ISO/TC 61/SC 5
ISO 13468-2:1999
Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument
90.93 83.080.01ISO/TC 61/SC 5
ISO 13586:2000
Plastics -- Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
90.93 83.080.01ISO/TC 61/SC 2
ISO 13586:2000/Amd 1:2003
Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
60.60 83.080.01ISO/TC 61/SC 2
ISO 13636:2012
Plastics -- Film and sheeting -- Non-oriented poly(ethylene terephthalate) (PET) sheets
60.60 83.140.10ISO/TC 61/SC 11
ISO 13741-1:1998
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 1: Direct liquid injection method
90.93 83.040.10
83.080.01
ISO/TC 61/SC 9
ISO 13741-2:1998
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 2: Headspace method
90.93 83.040.10
83.080.01
ISO/TC 61/SC 9
ISO 13802:1999
Plastics -- Verification of pendulum impact-testing machines -- Charpy, Izod and tensile impact-testing
90.92 83.200ISO/TC 61/SC 2
ISO 13802:1999/Cor 1:2000
60.60 83.200ISO/TC 61/SC 2
ISO/TR 13883:1995
Plastics -- Guide to the writing of test methods
90.93 83.120ISO/TC 61/SC 13
ISO 13894-1:2000
High-pressure decorative laminates -- Composite elements -- Part 1: Test methods
90.93 83.140.20ISO/TC 61/SC 11
ISO 13894-2:2005
High-pressure decorative laminates -- Composite elements -- Part 2: Specifications for composite elements with wood-based substrates for interior use
90.93 83.140.20ISO/TC 61/SC 11
ISO 13927:2001
Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector
90.92 83.080.01ISO/TC 61/SC 4
ISO 13931:2013
Carbon fibre -- Determination of volume resistivity
60.60 59.100.20ISO/TC 61/SC 13
ISO 13975:2012
Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems -- Method by measurement of biogas production
60.60 83.080.01ISO/TC 61/SC 5
ISO 14125:1998
Fibre-reinforced plastic composites -- Determination of flexural properties
90.93 83.120ISO/TC 61/SC 13
ISO 14125:1998/Amd 1:2011
60.60 83.120ISO/TC 61/SC 13
ISO 14125:1998/Cor 1:2001
60.60 83.120ISO/TC 61/SC 13
ISO 14126:1999
Fibre-reinforced plastic composites -- Determination of compressive properties in the in-plane direction
90.93 83.120ISO/TC 61/SC 13
ISO 14126:1999/Cor 1:2001
60.60 83.120ISO/TC 61/SC 13
ISO 14127:2008
Carbon-fibre-reinforced composites -- Determination of the resin, fibre and void contents
90.93 83.120ISO/TC 61/SC 13
ISO 14129:1997
Fibre-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
90.92 83.120ISO/TC 61/SC 13
ISO 14130:1997
Fibre-reinforced plastic composites -- Determination of apparent interlaminar shear strength by short-beam method
90.92 83.120ISO/TC 61/SC 13
ISO 14130:1997/Cor 1:2003
60.60 83.120ISO/TC 61/SC 13
ISO 14322:2012
Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
60.60 83.080.10ISO/TC 61/SC 12
ISO 14526-1:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 1: Designation system and basis for specifications
90.20 83.080.10ISO/TC 61/SC 12
ISO 14526-2:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.20 83.080.10ISO/TC 61/SC 12
ISO 14526-3:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 3: Requirements for selected moulding compounds
90.20 83.080.10ISO/TC 61/SC 12
ISO 14527-1:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications
90.20 83.080.10ISO/TC 61/SC 12
ISO 14527-2:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.20 83.080.10ISO/TC 61/SC 12
ISO 14527-3:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds
90.20 83.080.10ISO/TC 61/SC 12
ISO 14528-1:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications
90.20 83.080.10ISO/TC 61/SC 12
ISO 14528-2:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.20 83.080.10ISO/TC 61/SC 12
ISO 14528-3:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds
90.20 83.080.10ISO/TC 61/SC 12
ISO 14529-1:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 1: Designation system and basis for specifications
90.20 83.080.10ISO/TC 61/SC 12
ISO 14529-2:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.20 83.080.10ISO/TC 61/SC 12
ISO 14529-3:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 3: Requirements for selected moulding compounds
90.20 83.080.10ISO/TC 61/SC 12
ISO 14530-1:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 1: Designation system and basis for specifications
90.20 83.080.10ISO/TC 61/SC 12
ISO 14530-2:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.20 83.080.10ISO/TC 61/SC 12
ISO 14530-3:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 3: Requirements for selected moulding compounds
90.20 83.080.10ISO/TC 61/SC 12
ISO 14615:1997
Adhesives -- Durability of structural adhesive joints -- Exposure to humidity and temperature under load
90.93 83.180ISO/TC 61/SC 11
ISO 14616:1997
Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress
90.92 83.140.10ISO/TC 61/SC 11
ISO 14631:1999
Extruded sheets of impact-modified polystyrene (PS-I) -- Requirements and test methods
90.20 83.140.10ISO/TC 61/SC 11
ISO 14632:1998
Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods
90.93 83.140.10ISO/TC 61/SC 11
ISO 14663-1:1999
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 14663-2:1999
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 14676:1997
Adhesives -- Evaluation of the effectiveness of surface treatment techniques for aluminium -- Wet-peel test by floating-roller method
90.93 83.180ISO/TC 61/SC 11
ISO 14678:2005
Adhesives -- Determination of resistance to flow (sagging)
90.93 83.180ISO/TC 61/SC 11
ISO 14679:1997
Adhesives -- Measurement of adhesion characteristics by a three-point bending method
90.93 83.180ISO/TC 61/SC 11
ISO 14782:1999
Plastics -- Determination of haze for transparent materials
90.93 83.080.01ISO/TC 61/SC 5
ISO 14782:1999/Cor 1:2005
60.60 83.080.01ISO/TC 61/SC 5
ISO 14848:1998
Plastics -- Unsaturated-polyester resins -- Determination of reactivity at 130 degrees C
90.93 83.080.10ISO/TC 61/SC 12
ISO 14849:1999
Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Indophenol method
90.20 83.080.10ISO/TC 61/SC 12
ISO 14851:1999
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by measuring the oxygen demand in a closed respirometer
90.93 83.080.01ISO/TC 61/SC 5
ISO 14851:1999/Cor 1:2005
60.60 83.080.01ISO/TC 61/SC 5
ISO 14852:1999
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide
90.93 83.080.01ISO/TC 61/SC 5
ISO 14852:1999/Cor 1:2005
60.60 83.080.01ISO/TC 61/SC 5
ISO 14853:2005
Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -- Method by measurement of biogas production
90.93 83.080.01ISO/TC 61/SC 5
ISO 14853:2005/Cor 1:2009
60.60 83.080.01ISO/TC 61/SC 5
ISO 14855-1:2012
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method
60.60 83.080.01ISO/TC 61/SC 5
ISO 14855-2:2007
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
90.93 83.080.01ISO/TC 61/SC 5
ISO 14855-2:2007/Cor 1:2009
60.60 83.080.01ISO/TC 61/SC 5
ISO 14896:2009
Plastics -- Polyurethane raw materials -- Determination of isocyanate content
90.20 83.080.10ISO/TC 61/SC 12
ISO 14896:2006/Amd 1:2007
Acceptable variations in the procedure for method B
60.60 83.080.10ISO/TC 61/SC 12
ISO 14897:2002
Plastics -- Polyols for use in the production of polyurethane -- Determination of water content
90.93 83.080.10ISO/TC 61/SC 12
ISO 14898:1999
Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Determination of acidity
90.20 83.080.10ISO/TC 61/SC 12
ISO 14898:1999/Amd 1:2011
60.60 83.080.10ISO/TC 61/SC 12
ISO 14899:2001
Plastics -- Polyols for use in the production of polyurethane -- Determination of basicity
90.93 83.080.10ISO/TC 61/SC 12
ISO 14900:2001
Plastics -- Polyols for use in the production of polyurethane -- Determination of hydroxyl number
90.93 83.080.10ISO/TC 61/SC 12
ISO 14900:2001/Cor 1:2005
60.60 83.080.10ISO/TC 61/SC 12
ISO 14910-1:2013
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specification
60.60 83.080.20ISO/TC 61/SC 9
ISO 14910-2:2013
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
60.60 83.080.20ISO/TC 61/SC 9
ISO 15013:2007
Plastics -- Extruded sheets of polypropylene (PP) -- Requirements and test methods
90.93 83.140.10ISO/TC 61/SC 11
ISO 15014:2007
Plastics -- Extruded sheets of poly(vinylidene fluoride) (PVDF) -- Requirements and test methods
90.93 83.140.10ISO/TC 61/SC 11
ISO 15015:2011
Plastics -- Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) -- Requirements and test methods
60.60 83.140.10ISO/TC 61/SC 11
ISO 15023-1:2001
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications
90.92 83.080.20ISO/TC 61/SC 9
ISO 15023-2:2003
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 15024:2001
Fibre-reinforced plastic composites -- Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
90.93 83.120ISO/TC 61/SC 13
ISO 15028:2014
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine
60.60 83.080.10ISO/TC 61/SC 12
ISO 15033:2007
Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC
90.93 83.080.01ISO/TC 61/SC 5
ISO 15034:1999
Composites -- Prepregs -- Determination of resin flow
90.20 83.120ISO/TC 61/SC 13
ISO 15038:1999
Plastics -- Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials -- Determination of active-oxygen content
90.20 83.040.30ISO/TC 61/SC 12
ISO 15039:2003
Textile-glass rovings -- Determination of solubility of size
90.92 59.100.10ISO/TC 61/SC 13
ISO 15040:1999
Composites -- Prepregs -- Determination of gel time
90.20 83.120ISO/TC 61/SC 13
ISO 15063:2011
Plastics -- Polyols for use in the production of polyurethanes -- Determination of hydroxyl number by NIR spectroscopy
60.60 83.080.10ISO/TC 61/SC 12
ISO 15064:2010
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of the isomer ratio in toluenediisocyanate
60.60 83.080.10ISO/TC 61/SC 12
ISO 15100:2000
Plastics -- Reinforcement fibres -- Chopped strands -- Determination of bulk density
90.93 59.100.01ISO/TC 61/SC 13
ISO 15103-2:2007
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.93 83.080.20ISO/TC 61/SC 9
ISO 15105-1:2007
Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 1: Differential-pressure methods
90.93 83.140.10ISO/TC 61/SC 11
ISO 15105-2:2003
Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 2: Equal-pressure method
90.93 83.140.10ISO/TC 61/SC 11
ISO 15106-1:2003
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 1: Humidity detection sensor method
90.93 83.140.10ISO/TC 61/SC 11
ISO 15106-2:2003
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 2: Infrared detection sensor method
90.93 83.140.10ISO/TC 61/SC 11
ISO 15106-3:2003
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 3: Electrolytic detection sensor method
90.93 83.140.10ISO/TC 61/SC 11
ISO 15106-4:2008
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 4: Gas-chromatographic detection sensor method
90.93 83.140.10ISO/TC 61/SC 11
ISO 15107:1998
Adhesives -- Determination of cleavage strength of bonded joints
90.93 83.180ISO/TC 61/SC 11
ISO 15108:1998
Adhesives -- Determination of strength of bonded joints using a bending-shear method
90.93 83.180ISO/TC 61/SC 11
ISO 15109:1998
Adhesives -- Determination of the time to rupture of bonded joints under static load
90.93 83.180ISO/TC 61/SC 11
ISO 15166-1:1998
Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part systems
90.93 83.180ISO/TC 61/SC 11
ISO 15166-2:2000
Adhesives -- Methods of preparing bulk specimens -- Part 2: Elevated-temperature-curing one-part systems
90.93 83.180ISO/TC 61/SC 11
ISO 15252-1:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 1: Designation system and basis for specifications
90.20 83.080.10ISO/TC 61/SC 12
ISO 15252-2:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
90.20 83.080.10ISO/TC 61/SC 12
ISO 15252-3:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 3: Requirements for selected moulding compounds
90.20 83.080.10ISO/TC 61/SC 12
ISO 15270:2008
Plastics -- Guidelines for the recovery and recycling of plastics waste
90.93 13.030.50
83.080.01
ISO/TC 61/SC 5
ISO 15310:1999
Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method
90.93 83.120ISO/TC 61/SC 13
ISO 15314:2004
Plastics -- Methods for marine exposure
90.93 83.080.01ISO/TC 61/SC 6
ISO 15373:2001
Plastics -- Polymer dispersions -- Determination of free formaldehyde
90.93 83.080.20ISO/TC 61/SC 9
ISO 15509:2001
Adhesives -- Determination of the bond strength of engineering-plastic joints
90.93 83.180ISO/TC 61/SC 11
ISO 15512:2008
Plastics -- Determination of water content
90.92 83.080.01ISO/TC 61/SC 5
ISO 15527:2010
Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods
60.60 83.140.10ISO/TC 61/SC 11
ISO 15605:2000
Adhesives -- Sampling
90.93 83.180ISO/TC 61/SC 11
ISO 15791-1:2014
Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance
60.60 13.220.40
83.080.01
ISO/TC 61/SC 4
ISO 15850:2014
Plastics -- Determination of tension-tension fatigue crack propagation -- Linear elastic fracture mechanics (LEFM) approach
60.60 83.080.01ISO/TC 61/SC 2
ISO 15985:2004
Plastics -- Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas
90.92 83.080.01ISO/TC 61/SC 5
ISO 15985:2004/Cor 1:2007
60.60 83.080.01ISO/TC 61/SC 5
ISO 15987:2003
Plastics -- Film and sheeting -- Biaxially oriented polyamide (nylon) films
90.93 83.140.10ISO/TC 61/SC 11
ISO 15988:2003
Plastics -- Film and sheeting -- Biaxially oriented poly(ethylene terephthalate) (PET) films
90.93 83.140.10ISO/TC 61/SC 11
ISO 15989:2004
Plastics -- Film and sheeting -- Measurement of water-contact angle of corona-treated films
90.93 83.140.10ISO/TC 61/SC 11
ISO 15989:2004/Cor 1:2007
60.60 83.140.10ISO/TC 61/SC 11
ISO 16012:2004
Plastics -- Determination of linear dimensions of test specimens
90.92 83.080.01ISO/TC 61/SC 2
ISO 16012:2004/Cor 1:2005
60.60 83.080.01ISO/TC 61/SC 2
ISO 16014-1:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
60.60 83.080.01ISO/TC 61/SC 5
ISO 16014-2:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
60.60 83.080.01ISO/TC 61/SC 5
ISO 16014-3:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
60.60 83.080.01ISO/TC 61/SC 5
ISO 16014-4:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
60.60 83.080.01ISO/TC 61/SC 5
ISO 16014-5:2012
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
60.60 83.080.01ISO/TC 61/SC 5
ISO 16152:2005
Plastics -- Determination of xylene-soluble matter in polypropylene
90.93 83.080.01ISO/TC 61/SC 9
ISO 16770:2004
Plastics -- Determination of environmental stress cracking (ESC) of polyethylene -- Full-notch creep test (FNCT)
90.92 83.080.20ISO/TC 61/SC 9
ISO 16790:2005
Plastics -- Determination of drawing characteristics of thermoplastics in the molten state
90.93 83.080.20ISO/TC 61/SC 5
ISO 16869:2008
Plastics -- Assessment of the effectiveness of fungistatic compounds in plastics formulations
90.93 83.080.01ISO/TC 61/SC 6
ISO 16929:2013
Plastics -- Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
60.60 83.080.01ISO/TC 61/SC 5
ISO 17087:2006
Specifications for adhesives used for finger joints in non-structural lumber products
90.20 83.180ISO/TC 61/SC 11
ISO 17088:2012
Specifications for compostable plastics
60.60 83.080.01ISO/TC 61/SC 5
ISO 17178:2013
Adhesives -- Adhesives for bonding parquet to subfloor -- Test methods and minimum requirements
60.60 83.180ISO/TC 61/SC 11
ISO 17194:2007
Structural adhesives -- A standard database of properties
90.93 83.180ISO/TC 61/SC 11
ISO 17212:2012
Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
60.60 83.180ISO/TC 61/SC 11
ISO 17281:2002
Plastics -- Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
90.93 83.080.01ISO/TC 61/SC 2
ISO 17282:2004
Plastics -- Guide to the acquisition and presentation of design data
90.92 83.080.01ISO/TC 61/SC 2
ISO 17422:2002
Plastics -- Environmental aspects -- General guidelines for their inclusion in standards
90.93 13.020.01
83.080.01
ISO/TC 61/SC 5
ISO 17555:2003
Plastics -- Film and sheeting -- Biaxially oriented polypropylene (PP) films
90.93 83.140.10ISO/TC 61/SC 11
ISO 17556:2012
Plastics -- Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
60.60 83.080.01ISO/TC 61/SC 5
ISO 17557:2003
Plastics -- Film and sheeting -- Cast polypropylene (PP) films
90.93 83.140.10ISO/TC 61/SC 11
ISO 17710:2002
Plastics -- Polyols for use in the production of polyurethane -- Determination of degree of unsaturation by microtitration
90.93 83.080.10ISO/TC 61/SC 12
ISO 17744:2004
Plastics -- Determination of specific volume as a function of temperature and pressure (pvT diagram) -- Piston apparatus method
90.93 83.080.01ISO/TC 61/SC 5
ISO 17771:2003
Plastics -- Thermoset moulding compounds -- Determination of the degree of fibre wetting in SMC
90.93 83.120ISO/TC 61/SC 13
ISO 18280:2010
Plastics -- Epoxy resins -- Test methods
60.60 83.080.10ISO/TC 61/SC 12
ISO 18352:2009
Carbon-fibre-reinforced plastics -- Determination of compression-after-impact properties at a specified impact-energy level
60.60 83.120ISO/TC 61/SC 13
ISO 18872:2007
Plastics -- Determination of tensile properties at high strain rates
90.93 83.080.10ISO/TC 61/SC 2
ISO/TR 19032:2006
Plastics -- Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
90.93 83.080.01ISO/TC 61/SC 6
ISO 19212:2006
Adhesives -- Determination of temperature dependence of shear strength
90.20 83.180ISO/TC 61/SC 11
ISO 19252:2008
Plastics -- Determination of scratch properties
90.93 83.080.01ISO/TC 61/SC 2
ISO 19712-1:2008
Plastics -- Decorative solid surfacing materials -- Part 1: Classification and specifications
90.93 83.140.20ISO/TC 61/SC 11
ISO 19712-2:2007
Plastics -- Decorative solid surfacing materials -- Part 2: Determination of properties -- Sheet goods
90.93 83.140.20ISO/TC 61/SC 11
ISO 19712-3:2007
Plastics -- Decorative solid surfacing materials -- Part 3: Determination of properties -- Solid surface shapes
90.93 83.140.20ISO/TC 61/SC 11
ISO 20200:2004
Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
90.92 83.080.01ISO/TC 61/SC 5
ISO 20392:2007
Thermal-insulating materials -- Determination of compressive creep
90.93 83.100ISO/TC 61/SC 10
ISO 20393:2007
Thermal-insulating materials -- Determination of long-term water absorption by diffusion
90.93 83.100ISO/TC 61/SC 10
ISO 20394:2007
Thermal-insulating materials -- Determination of freeze-thaw resistance
90.93 83.100ISO/TC 61/SC 10
ISO 20753:2008
Plastics -- Test specimens
90.93 83.080.01ISO/TC 61/SC 2
ISO 20965:2005
Plastics -- Determination of the transient extensional viscosity of polymer melts
90.93 83.080.01ISO/TC 61/SC 5
ISO 21048:2014
Plastics -- Epoxy resins -- Determination of 1,2-glycol content
60.60 83.080.10ISO/TC 61/SC 12
ISO 21318:2007
Plastics -- Epoxy resins -- Determination of electrical conductivity of aqueous resin extracts
90.93 83.080.10ISO/TC 61/SC 12
ISO 21367:2007
Plastics -- Reaction to fire -- Test method for flame spread and combustion product release from vertically oriented specimens
90.93 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO 21368:2005
Adhesives -- Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
90.93 83.180ISO/TC 61/SC 11
ISO 21509:2006
Plastics and ebonite -- Verification of Shore durometers
90.20 83.080.01ISO/TC 61/SC 2
ISO 21627-1:2009
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine
90.20 83.080.10ISO/TC 61/SC 12
ISO 21627-2:2009
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine
90.20 83.080.10ISO/TC 61/SC 12
ISO 21627-3:2009
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 3: Total chlorine
90.20 83.080.10ISO/TC 61/SC 12
ISO 22007-1:2009
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 1: General principles
90.20 83.080.01ISO/TC 61/SC 5
ISO 22007-2:2008
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method
90.92 83.080.01ISO/TC 61/SC 5
ISO 22007-3:2008
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 3: Temperature wave analysis method
90.93 83.080.01ISO/TC 61/SC 5
ISO 22007-4:2008
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 4: Laser flash method
90.92 83.080.01ISO/TC 61/SC 5
ISO/TR 22007-5:2011
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
60.60 83.080.01ISO/TC 61/SC 5
ISO 22088-1:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 1: General guidance
90.93 83.080.01ISO/TC 61/SC 6
ISO 22088-2:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 2: Constant tensile load method
90.93 83.080.01ISO/TC 61/SC 6
ISO 22088-3:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 3: Bent strip method
90.93 83.080.01ISO/TC 61/SC 6
ISO 22088-4:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 4: Ball or pin impression method
90.93 83.080.01ISO/TC 61/SC 6
ISO 22088-5:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 5: Constant tensile deformation method
90.93 83.080.01ISO/TC 61/SC 6
ISO 22088-6:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 6: Slow strain rate method
90.93 83.080.01ISO/TC 61/SC 6
ISO 22196:2011
Measurement of antibacterial activity on plastics and other non-porous surfaces
60.60 83.080.01ISO/TC 61/SC 6
ISO 22314:2006
Plastics -- Glass-fibre-reinforced products -- Determination of fibre length
90.92 83.120ISO/TC 61/SC 13
ISO 22498:2005
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Particle size determination by mechanical sieving
90.93 83.080.20ISO/TC 61/SC 9
ISO 22702:2003
Utility lighters -- General consumer-safety requirements
90.92 97.180ISO/TC 61/SC 4
ISO 22702:2003/Amd 1:2008
Clarification of requirements and addition of safety symbols
60.60 97.180ISO/TC 61
ISO 23559:2011
Plastics -- Film and sheeting -- Guidance on the testing of thermoplastic films
60.60 83.140.10ISO/TC 61/SC 11
ISO 23560:2008
Woven polypropylene sacks for bulk packaging of foodstuffs
90.92 83.140.99
55.080
ISO/TC 61/SC 11
ISO 24538:2008
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
90.93 83.080.20ISO/TC 61/SC 5
ISO 25137-1:2009
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.20 83.080.20ISO/TC 61/SC 9
ISO 25137-2:2009
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.20 83.080.20ISO/TC 61/SC 9
ISO 25179:2010
Adhesives -- Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
60.60 83.180ISO/TC 61/SC 11
ISO 25217:2009
Adhesives -- Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
90.20 83.180ISO/TC 61/SC 2
ISO 25337:2010
Plastics -- Production quality control -- Statistical method for using single measurements
60.60 83.080.01ISO/TC 61/SC 5
ISO 25761:2014
Plastics -- Polyols for use in the production of polyurethanes -- Determination of basicity (total amine value), expressed as percent nitrogen
60.60 83.080.10ISO/TC 61/SC 12
ISO 25762:2009
Plastics -- Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
90.20 13.220.40
83.080.01
ISO/TC 61/SC 4
ISO 26603:2008
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of total chlorine
90.93 83.080.10ISO/TC 61/SC 12
ISO 26842-1:2013
Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 1: Resistance to delamination in non-severe environments
60.60 83.180ISO/TC 61/SC 11
ISO 26842-2:2013
Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 2: Resistance to delamination in severe environments
60.60 83.180ISO/TC 61/SC 11
ISO 27547-1:2010
Plastics -- Preparation of test specimens of thermoplastic materials using mouldless technologies -- Part 1: General principles, and laser sintering of test specimens
60.60 83.080.20ISO/TC 61/SC 9
ISO 28078-1:2009
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 83.080.20ISO/TC 61/SC 9
ISO 28078-2:2009
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 83.080.20ISO/TC 61/SC 9
ISO 28941-1:2008
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.93 83.080.20ISO/TC 61/SC 9
ISO 29221:2014
Plastics -- Determination of mode I plane-strain crack-arrest toughness
60.60 83.080.01ISO/TC 61/SC 2
ISO 29664:2010
Plastics -- Artificial weathering including acidic deposition
60.60 83.080.01ISO/TC 61/SC 6
ISO 29862:2007
Self adhesive tapes -- Determination of peel adhesion properties
90.93 83.180ISO/TC 61/SC 11
ISO 29863:2007
Self adhesive tapes -- Measurement of static shear adhesion
90.93 83.180ISO/TC 61/SC 11
ISO 29864:2007
Self adhesive tapes -- Measurement of breaking strength and elongation at break
90.93 83.180ISO/TC 61/SC 11
ISO 30021:2013
Plastics -- Burning behaviour -- Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
60.60 83.080.01
13.220.40
ISO/TC 61/SC 4
IEC 60695-11-10:1999
Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods
60.60 83.080.01
13.220.40
ISO/TC 61/SC 4
IEC 60695-11-10:1999/Amd 1:2003
60.60 13.220.40
83.080.01
ISO/TC 61/SC 4
IEC 60695-11-20:1999
Fire hazard testing -- Part 11-20: Test flames -- 500 W flame test methods
60.60 83.080.01
13.220.40
ISO/TC 61/SC 4
IEC 60695-11-20:1999/Amd 1:2003
60.60 13.220.40
83.080.01
ISO/TC 61/SC 4