Home

Standards catalogue

Subscribe to updates

ISO/TC 61  - Plastics

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 61 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO/CD 294-1
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens
30.60 83.080.20ISO/TC 61/SC 9
ISO/CD 294-5
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
30.99 83.080.20ISO/TC 61/SC 9
ISO 472:2013/NP Amd 1
10.99 83.080.01
01.040.83
ISO/TC 61/SC 1
ISO/NP 877-1
Plastics -- Methods of exposure to solar radiation -- Part 1: General guidance
10.99 83.080.01ISO/TC 61/SC 6
ISO/NP 877-2
Plastics -- Methods of exposure to solar radiation -- Part 2: Direct weathering and exposure behind window glass
10.99 83.080.01ISO/TC 61/SC 6
ISO/NP 877-3
Plastics -- Methods of exposure to solar radiation -- Part 3: Intensified weathering using concentrated solar radiation
10.99 83.080.01ISO/TC 61/SC 6
ISO 899-1:2003/FDAmd 1
50.20 83.080.01ISO/TC 61/SC 2
ISO 899-2:2003/FDAmd 1
50.00 83.080.01ISO/TC 61/SC 2
ISO 1043-1:2011/CD Amd 1
30.99 83.080.01ISO/TC 61/SC 1
ISO/CD 1043-3
Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers
30.60 83.040.30
83.080.01
ISO/TC 61/SC 1
ISO 1043-4:1998/CD Amd 1
30.99 83.080.01
83.040.30
ISO/TC 61/SC 1
ISO/DIS 1922
Rigid cellular plastics -- Determination of shear strength
40.93 83.100ISO/TC 61/SC 10
ISO 2078:1993/DAmd 1
40.99 59.100.10ISO/TC 61/SC 13
ISO 2797:1986/NP Amd 1
10.99 59.100.10ISO/TC 61/SC 13
ISO 3616:2001/NP Amd 1
10.99 59.100.10ISO/TC 61/SC 13
ISO/CD 4582
Plastics -- Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
30.99 83.080.01ISO/TC 61/SC 6
ISO/CD 4586-1
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 1: General information
30.99 83.140.20ISO/TC 61/SC 11
ISO/CD 4586-2
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 2: Determination of properties
30.99 83.140.20ISO/TC 61/SC 11
ISO/CD 4586-3
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
30.99 83.140.20ISO/TC 61/SC 11
ISO/CD 4586-4
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
30.99 83.140.20ISO/TC 61/SC 11
ISO/CD 4586-5
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
30.99 83.140.20ISO/TC 61/SC 11
ISO/CD 4586-6
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
30.99 83.140.20ISO/TC 61/SC 11
ISO/CD 4586-7
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 7: Classification and specifications for design laminates
30.99 83.140.20ISO/TC 61/SC 11
ISO/CD 4586-8
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 8: Classification and specifications for alternative core laminates
30.99 83.140.20ISO/TC 61/SC 11
ISO/NP 4589-1
Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance
10.99ISO/TC 61/SC 4
ISO/NP 4589-2
Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
10.99ISO/TC 61/SC 4
ISO/NP 4589-3
Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
10.99ISO/TC 61/SC 4
ISO/DIS 4590
Rigid cellular plastics -- Determination of the volume percentage of open cells and of closed cells
40.99 83.100ISO/TC 61/SC 10
ISO/DIS 4892-1
Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance
40.60 83.080.01ISO/TC 61/SC 6
ISO/DIS 4892-3
Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
40.99 83.080.01ISO/TC 61/SC 6
ISO 5025:1997/NP Amd 1
10.99 59.100.10ISO/TC 61/SC 13
ISO/NP 5659-2
Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
10.99 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO/DIS 6237
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by tensile loading
40.99 83.180ISO/TC 61/SC 11
ISO/DIS 6383-1
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1: Trouser tear method
40.99 83.140.10ISO/TC 61/SC 11
ISO/DIS 6721-10
Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
40.20 83.080.01ISO/TC 61/SC 5
ISO/DIS 7214
Cellular plastics -- Polyethylene -- Methods of test
40.99 83.100ISO/TC 61/SC 10
ISO/NP 9370
Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method
10.99 83.080.01ISO/TC 61/SC 6
ISO/DIS 9773
Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
40.93 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO/NP 9994
Lighters -- Safety specification
10.99 97.180ISO/TC 61/SC 4
ISO/NP 10093
Plastics -- Fire tests -- Standard ignition sources
10.99 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO/DIS 10364.2
Structural adhesives -- Determination of the pot life (working life) of multi-component adhesives
40.60 83.180ISO/TC 61/SC 11
ISO/DIS 11357-7
Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics
40.99 83.080.01ISO/TC 61/SC 5
ISO/CD 11469
Plastics -- Generic identification and marking of plastics products
30.60 83.080.01ISO/TC 61/SC 1
ISO/NP 12992
Plastics -- Vertical flame spread determination for film and sheet
10.99 83.080.01
13.220.40
ISO/TC 61/SC 4
ISO/DIS 13802
Plastics -- Verification of pendulum impact-testing machines -- Charpy, Izod and tensile impact-testing
40.99 83.200ISO/TC 61/SC 2
ISO/FDIS 13927
Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector
50.00 83.080.01ISO/TC 61/SC 4
ISO/NP 14853
Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -- Method by measurement of biogas production
10.99 83.080.01ISO/TC 61/SC 5
ISO/CD 15023-1
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications
30.60 83.080.20ISO/TC 61/SC 9
ISO 15039:2003/DAmd 1
40.99 59.100.10ISO/TC 61/SC 13
ISO/DIS 15106-5
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 5: Presssure sensor method
40.60 83.140.10ISO/TC 61/SC 11
ISO/DIS 15106-6
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 6: Atmospheric pressure ionization mass spectrometer method
40.60 83.140.10ISO/TC 61/SC 11
ISO/DIS 15106-7
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 7: Calcium corrosion method
40.60 83.140.10ISO/TC 61/SC 11
ISO/CD TS 15791-2
Plastics -- Development and use of intermediate-scale fire tests for products
30.00 13.220.40
83.080.01
ISO/TC 61/SC 4
ISO/FDIS 16012
Plastics -- Determination of linear dimensions of test specimens
50.00 83.080.01ISO/TC 61/SC 2
ISO/FDIS 16396-1
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system, marking of products and basis for specifications
50.20 83.080.20ISO/TC 61/SC 9
ISO/CD 16396-2
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
30.00 83.080.20ISO/TC 61/SC 9
ISO/DIS 16616
Test methods for Natural Fiber-reinforced Plastic Composite (NFC) Deck Boards
40.60 83.140.99ISO/TC 61/SC 11
ISO/DIS 16620-1
Plastics -- Biobased content -- Part 1: General principles
40.99 83.080.01ISO/TC 61/SC 5
ISO/DIS 16620-2
Plastics -- Biobased content -- Part 2: Determination of biobased carbon content
40.99 83.080.01ISO/TC 61/SC 5
ISO/DIS 16620-3
Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
40.60 83.080.01ISO/TC 61/SC 5
ISO/CD 16620-4
Plastics -- Biobased content -- Part 4: Determination of the total biobased mass content
30.60 83.080.01ISO/TC 61/SC 5
ISO/NP 16620-5
Plastics -- Biobased content -- Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
10.99ISO/TC 61/SC 5
ISO/CD 17282
Plastics -- Guide to the acquisition and presentation of design data
30.99 83.080.01ISO/TC 61/SC 2
ISO/DIS 17855-2
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 83.080.20ISO/TC 61/SC 9
ISO/CD 17880
Plastics -- Self-supporting metal-faced sandwich panels
30.99 83.140.99ISO/TC 61/SC 10
ISO/CD 18188
Plastic straws for food -- Specification
30.60 67.250
83.140.99
ISO/TC 61/SC 11
ISO/CD 18247
Plastics -- Determination of the shear viscosity of polymer melts using screw-type rheometers
30.60 83.080.01ISO/TC 61/SC 5
ISO/DIS 18263-1
Plastics -- Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging -- Part 1: Designation system and basis for specification
40.60 83.080.20ISO/TC 61/SC 9
ISO/DIS 18263-2
Plastics -- Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumenr packaging -- Part 2: Preparation of test specimens and determination of properties
40.60 83.080.20ISO/TC 61/SC 9
ISO/WD 18485
Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
20.20ISO/TC 61/SC 2
ISO/DTR 18486
Plastics -- Calculation of the goodness of fit of the spectral distribution of a solar simulator to a reference solar spectral distribution
30.99 83.080.01ISO/TC 61/SC 6
ISO/CD 18830
Plastics -- Test method for determining aerobic biodegradation of plastic materials sunk at the sea water/sandy sediment interface
30.60 83.080.01ISO/TC 61/SC 5
ISO/AWI TS 19022
Plastics -- Determination acceleration of laboratory weathering
20.00ISO/TC 61/SC 6
ISO/DIS 19062-1
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.60 83.080.20ISO/TC 61/SC 9
ISO/DIS 19063-1
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.60 83.080.20ISO/TC 61/SC 9
ISO/DIS 19064-1
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.60 83.080.20ISO/TC 61/SC 9
ISO 19065-1
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.00 83.080.20ISO/TC 61/SC 9
ISO/FDIS 19069-1
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
50.20 83.080.20ISO/TC 61/SC 9
ISO/DIS 19069-2
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 83.080.20ISO/TC 61/SC 9
ISO/DIS 19095-1
Adhesives -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 1: Guidelines for the approach
40.60 83.180ISO/TC 61/SC 11
ISO/DIS 19095-2
Adhesives -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 2: Test specimens
40.60 83.180ISO/TC 61/SC 11
ISO/DIS 19095-3
Adhesives -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 3: Test methods
40.60 83.180ISO/TC 61/SC 11
ISO/DIS 19095-4
Adhesives -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 4: Environmental condition for durability
40.60 83.180ISO/TC 61/SC 11
ISO/CD 19209
Adhesives - Thermoplastic wood adhesives for non-structural applications -- Classification
30.99 83.180ISO/TC 61/SC 11
ISO/CD 19210
Adhesives -- Thermoplastic wood adhesives for non-structural applications -- Determination of tensile shear strength of lap joints
30.99 83.180ISO/TC 61/SC 11
ISO/WD 19278
Plastics -- Instrumented indentation test for hardness -- Test method
20.20ISO/TC 61/SC 2
ISO/NP 19679
Plastics -- Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface -- Method by analysis of evolved carbon dioxide
10.99ISO/TC 61/SC 5
ISO/NP 19699-1
Plastics -- Superabsorbent resin -- Cross-linked porous so dium polyacrylate for absorbing blood -- Part 1: Test methods
10.99ISO/TC 61/SC 11
ISO/NP 19699-2
Plastics -- Superabsorbent resin -- Cross-linked porous so dium polyacrylate for absorbing blood -- Part 2: General requirements
10.99ISO/TC 61/SC 11
ISO/NP 19721
Plastics -- Abrasion test method for artificial turfs using simultaneous UV exposure and mechanical wear
10.99ISO/TC 61/SC 6
ISO/NP 19821
Wood plastic composite (WPC) deck boards -- Determination of span and load carrying capacity
10.99ISO/TC 61/SC 11
ISO/CD 19927
Fibre-reinforced plastic composites -- Determination of interlaminar strength and modulus by double beamshear test
30.00 83.120ISO/TC 61/SC 13
ISO/NP 19929
Plastics -- Determination of average molecular mass and mixture ratio of poly (ethylene glycol) and its derivatives by MALDI-TOFMS
10.99ISO/TC 61/SC 5
ISO/NP 19935-1
Plastics -- Temperature modulated DSC -- Part 1: General principles
10.99ISO/TC 61/SC 5
ISO/CD 20028-1
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
30.60 83.080.20ISO/TC 61/SC 9
ISO/CD 20028-2
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
30.60 83.080.20ISO/TC 61/SC 9
ISO/CD 20029-1
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specifications
30.60 83.080.20ISO/TC 61/SC 9
ISO/CD 20029-2
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
30.60 83.080.20ISO/TC 61/SC 9
ISO/NP TR 20118
Guide to fire characteristics and fire performance of PVC materials used in building applications
10.99ISO/TC 61/SC 4
ISO/NP 20144
Fibre-reinforced plastic composites -- Standard qualification plan
10.99ISO/TC 61/SC 13
ISO/DIS 20200
Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
40.60 83.080.01ISO/TC 61/SC 5
ISO/DIS 22007-2.2
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method
40.99 83.080.01ISO/TC 61/SC 5
ISO/NP 22007-4
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 4: Laser flash method
10.99 83.080.01ISO/TC 61/SC 5
ISO/NP 22702
Utility lighters -- General consumer-safety requirements
10.99 97.180ISO/TC 61/SC 4
ISO/DIS 23560
Woven polypropylene sacks for bulk packaging of foodstuffs
40.60 83.140.99
55.080
ISO/TC 61/SC 11
ISO/DIS 30012
Carbon-fibre-reinforced plastics -- Determination of the size and aspect ratio of crushed objects
40.99 59.100.20ISO/TC 61/SC 13