Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 32:1977 Gas cylinders for medical use -- Marking for identification of content | 90.93 | 11.040.10 01.070 | ISO/TC 58/SC 4 |
| ISO 407:2004 Small medical gas cylinders -- Pin-index yoke-type valve connections | 90.20 | 11.040.10 | ISO/TC 58/SC 2 |
| ISO 3500:2005 Gas cylinders -- Seamless steel CO2 cylinders for fixed fire-fighting installations on ships | 90.93 | 13.220.10 47.020.99 23.020.30 | ISO/TC 58/SC 3 |
| ISO 3500:2005/Amd 1:2010 | 60.60 | 23.020.30 47.020.99 13.220.10 | ISO/TC 58/SC 3 |
| ISO 3807-1:2000 Cylinders for acetylene -- Basic requirements -- Part 1: Cylinders without fusible plugs | 90.92 | 23.020.30 | ISO/TC 58 |
| ISO 3807-2:2000 Cylinders for acetylene -- Basic requirements -- Part 2: Cylinders with fusible plugs | 90.92 | 23.020.30 | ISO/TC 58 |
| ISO 4706:2008 Gas cylinders -- Refillable welded steel cylinders -- Test pressure 60 bar and below | 90.93 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 5145:2004 Cylinder valve outlets for gases and gas mixtures -- Selection and dimensioning | 90.92 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 5145:2004/Amd 1:2006 Cylinder valve outlets for gases for medical use | 60.60 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 5145:2004/Amd 2:2008 | 60.60 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 6406:2005 Gas cylinders -- Seamless steel gas cylinders -- Periodic inspection and testing | 90.92 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 7225:2005 Gas cylinders -- Precautionary labels | 90.93 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 7225:2005/Amd 1:2012 | 60.60 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO/TR 7470:1988 Valve outlets for gas cylinders -- List of provisions which are either standardized or in use | 60.60 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 7866:2012 Gas cylinders -- Refillable seamless aluminium alloy gas cylinders -- Design, construction and testing | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 9809-1:2010 Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 9809-2:2010 Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 9809-3:2010 Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 3: Normalized steel cylinders | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 10156:2010 Gases and gas mixtures -- Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets | 60.60 | 71.100.20 23.020.30 | ISO/TC 58/SC 2 |
| ISO 10156:2010/Cor 1:2010 | 60.60 | 71.100.20 23.020.30 | ISO/TC 58/SC 2 |
| ISO 10286:2007 Gas cylinders -- Terminology | 90.92 | 23.020.30 01.040.23 | ISO/TC 58 |
| ISO 10297:2006 Transportable gas cylinders -- Cylinder valves -- Specification and type testing | 90.92 | 23.020.30 23.060.40 | ISO/TC 58/SC 2 |
| ISO 10298:2010 Determination of toxicity of a gas or gas mixture | 60.60 | 71.100.20 | ISO/TC 58/SC 2 |
| ISO 10460:2005 Gas cylinders -- Welded carbon-steel gas cylinders -- Periodic inspection and testing | 90.93 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 10461:2005 Gas cylinders -- Seamless aluminium-alloy gas cylinders -- Periodic inspection and testing | 90.92 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 10461:2005/Amd 1:2006 | 60.60 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 10462:2005 Gas cylinders -- Transportable cylinders for dissolved acetylene -- Periodic inspection and maintenance | 90.92 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 10464:2004 Gas cylinders -- Refillable welded steel cylinders for liquefied petroleum gas (LPG) -- Periodic inspection and testing | 90.93 | 23.020.30 75.200 | ISO/TC 58/SC 4 |
| ISO 10691:2004 Gas cylinders -- Refillable welded steel cylinders for liquified petroleum gas (LPG) -- Procedures for checking before, during and after filling | 90.93 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 10692-1:2001 Gas cylinders -- Gas cylinder valve connections for use in the micro-electronics industry -- Part 1: Outlet connections | 90.93 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 10692-2:2001 Gas cylinders -- Gas cylinder valve connections for use in the micro-electronics industry -- Part 2: Specification and type testing for valve to cylinder connections | 90.93 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 10961:2010 Gas cylinders -- Cylinder bundles -- Design, manufacture, testing and inspection | 60.60 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 11114-1:2012 Gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 1: Metallic materials | 60.60 | 23.020.30 | ISO/TC 58 |
| ISO 11114-2:2013 Gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 2: Non-metallic materials | 60.60 | 23.020.30 | ISO/TC 58 |
| ISO 11114-3:2010 Gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere | 60.60 | 23.020.30 | ISO/TC 58 |
| ISO 11114-4:2005 Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement | 90.93 | 23.020.30 | ISO/TC 58 |
| ISO 11117:2008 Gas cylinders -- Valve protection caps and valve guards -- Design, construction and tests | 90.93 | 11.040.10 23.020.30 | ISO/TC 58/SC 2 |
| ISO 11117:2008/Cor 1:2009 | 60.60 | 23.020.30 11.040.10 | ISO/TC 58/SC 2 |
| ISO 11118:1999 Gas cylinders -- Non-refillable metallic gas cylinders -- Specification and test methods | 90.92 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 11119-1:2012 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 11119-2:2012 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 11119-3:2013 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 11120:1999 Gas cylinders -- Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l -- Design construction and testing | 90.92 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 11363-1:2010 Gas cylinders -- 17E and 25E taper threads for connection of valves to gas cylinders -- Part 1: Specifications | 60.60 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 11363-1:2010/Cor 2:2012 | 60.60 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 11363-2:2010 Gas cylinders -- 17E and 25E taper threads for connection of valves to gas cylinders -- Part 2: Inspection gauges | 60.60 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO/TR 11364:2012 Gas cylinders -- Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system | 60.60 | 23.020.30 | ISO/TC 58 |
| ISO 11372:2011 Gas cylinders -- Acetylene cylinders -- Filling conditions and filling inspection | 60.60 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 11439:2000 Gas cylinders -- High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles | 90.92 | 43.060.40 | ISO/TC 58/SC 3 |
| ISO 11513:2011 Gas cylinders -- Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) -- Design, construction, testing, use and periodic inspection | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 11621:1997 Gas cylinders -- Procedures for change of gas service | 90.20 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 11623:2002 Transportable gas cylinders -- Periodic inspection and testing of composite gas cylinders | 90.92 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 11625:2007 Gas cylinders -- Safe handling | 90.93 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 11755:2005 Gas cylinders -- Cylinder bundles for compressed and liquefied gases (excluding acetylene) -- Inspection at time of filling | 90.93 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 12209-1:2000 Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 1: Yoke type connections | 90.92 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 12209-2:2000 Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 2: Threaded connections | 90.92 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 12209-3:2000 Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 3: Adaptor for 230 bar valves | 90.92 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO/TR 12391-1:2001 Gas cylinders -- Refillable seamless steel -- Performance tests -- Part 1: Philosophy, background and conclusions | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO/TR 12391-2:2002 Gas cylinders -- Refillable seamless steel -- Performance tests -- Part 2: Fracture performance tests -- Monotonic burst tests | 90.93 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO/TR 12391-3:2002 Gas cylinders -- Refillable seamless steel -- Performance tests -- Part 3: Fracture performance tests -- Cyclical burst tests | 90.93 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO/TR 12391-4:2002 Gas cylinders -- Refillable seamless steel -- Performance tests -- Part 4: Flawed-cylinder cycle test | 90.93 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO/TR 13086-1:2011 Gas cylinders - Guidance for design of composite cylinders -- Part 1: Stress rupture of fibres and burst ratios related to test pressure | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 13088:2011 Gas cylinders -- Acetylene cylinder bundles -- Filling conditions and filling inspection | 60.60 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 13338:1995 Determination of tissue corrosiveness of a gas or gas mixture | 90.93 | 71.100.20 | ISO/TC 58/SC 2 |
| ISO 13340:2001 Transportable gas cylinders -- Cylinders valves for non-refillable cylinders -- Specification and prototype testing | 90.93 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 13341:2010 Gas cylinders -- Fitting of valves to gas cylinders | 60.60 | 23.020.30 | ISO/TC 58 |
| ISO/TR 13763:1994/Cor 1:1996 | 60.60 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 13769:2007 Gas cylinders -- Stamp marking | 90.93 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 13770:1997 Aluminium alloy gas cylinders -- Operational requirements for avoidance of neck and shoulder cracks | 90.20 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 14245:2006 Gas cylinders -- Specifications and testing of LPG cylinder valves -- Self-closing | 90.93 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 14246:2001 Transportable gas cylinders -- Gas cylinder valves -- Manufacturing tests and inspections | 90.92 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO/TR 14600:2000 Gas cylinders -- International quality conformance system -- Basic rules | 60.60 | 23.020.30 | ISO/TC 58 |
| ISO 15245-1:2001 Gas cylinders -- Parallel threads for connection of valves to gas cylinders -- Part 1: Specification | 90.20 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 15245-2:2001 Gas cylinders -- Parallel threads for connection of valves to gas cylinders -- Part 2: Gauge inspection | 90.93 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 15995:2006 Gas cylinders -- Specifications and testing of LPG cylinder valves -- Manually operated | 90.93 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 15996:2005 Gas cylinders -- Residual pressure valves -- General requirements and type testing | 90.93 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 15996:2005/Amd 1:2007 | 60.60 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 16148:2006 Gas cylinders -- Refillable seamless steel gas cylinders -- Acoustic emission testing (AT) for periodic inspection | 90.92 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 18172-1:2007 Gas cylinders -- Refillable welded stainless steel cylinders -- Part 1: Test pressure 6 MPa and below | 90.93 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 18172-2:2007 Gas cylinders -- Refillable welded stainless steel cylinders -- Part 2: Test pressure greater than 6 MPa | 90.93 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 19078:2013 Gas cylinders -- Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles | 60.60 | 43.060.40 23.020.30 | ISO/TC 58/SC 4 |
| ISO 20703:2006 Gas cylinders -- Refillable welded aluminium-alloy cylinders -- Design, construction and testing | 90.93 | 23.020.30 | ISO/TC 58/SC 3 |
| ISO 21007-1:2005 Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 1: Reference architecture and terminology | 90.93 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 21007-2:2013 Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 2: Numbering schemes for radio frequency identification | 90.92 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 22434:2006 Transportable gas cylinders -- Inspection and maintenance of cylinder valves | 90.93 | 23.020.30 23.060.01 | ISO/TC 58/SC 2 |
| ISO 22435:2007 Gas cylinders -- Cylinder valves with integrated pressure regulators -- Specification and type testing | 90.92 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO 22435:2007/Amd 1:2012 | 60.60 | 23.020.30 | ISO/TC 58/SC 2 |
| ISO/TR 22694:2008 Gas cylinders -- Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing | 60.60 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 22991:2004 Gas cylinders -- Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) -- Design and construction | 90.93 | 75.200 23.020.30 | ISO/TC 58/SC 3 |
| ISO 24431:2006 Gas cylinders -- Cylinders for compressed and liquefied gases (excluding acetylene) -- Inspection at time of filling | 90.92 | 23.020.30 | ISO/TC 58/SC 4 |
| ISO 25760:2009 Gas cylinders -- Operational procedures for the safe removal of valves from gas cylinders | 60.60 | 23.020.30 | ISO/TC 58/SC 4 |
