Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 1419:1995 Rubber- or plastics-coated fabrics -- Accelerated-ageing tests | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 1420:2001 Rubber- or plastics-coated fabrics -- Determination of resistance to penetration by water | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 1421:1998 Rubber- or plastics-coated fabrics -- Determination of tensile strength and elongation at break | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 1798:2008 Flexible cellular polymeric materials -- Determination of tensile strength and elongation at break | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 1856:2000 Flexible cellular polymeric materials -- Determination of compression set | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 1856:2000/Amd 1:2007 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 2230:2002 Rubber products -- Guidelines for storage | 90.93 | 83.060 | ISO/TC 45/SC 4 |
| ISO 2231:1989 Rubber- or plastics-coated fabrics -- Standard atmospheres for conditioning and testing | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2286-1:1998 Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 1: Methods for determination of length, width and net mass | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2286-2:1998 Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2286-3:1998 Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 3: Method for determination of thickness | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2321:2006 Rubber threads -- Methods of test | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 2411:2000 Rubber- or plastics-coated fabrics -- Determination of coating adhesion | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2439:2008 Flexible cellular polymeric materials -- Determination of hardness (indentation technique) | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 2440:1997 Flexible and rigid cellular polymeric materials -- Accelerated ageing tests | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 2440:1997/Amd 1:2010 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3011:1997 Rubber- or plastics-coated fabrics -- Determination of resistance to ozone cracking under static conditions | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 3302-1:1996 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances | 90.92 | 83.140.01 | ISO/TC 45/SC 4 |
| ISO 3302-1:1996/Amd 1:2001 Classification system for flash | 60.60 | 83.140.01 | ISO/TC 45/SC 4 |
| ISO 3302-2:2008 Rubber -- Tolerances for products -- Part 2: Geometrical tolerances | 90.93 | 83.140.01 | ISO/TC 45/SC 4 |
| ISO 3303-1:2012 Rubber- or plastics-coated fabrics -- Determination of bursting strength -- Part 1: Steel-ball method | 60.60 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 3303-2:2012 Rubber- or plastics-coated fabrics -- Determination of bursting strength -- Part 2: Hydraulic method | 60.60 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 3385:1989 Flexible cellular polymeric materials -- Determination of fatigue by constant-load pounding | 90.92 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3386-1:1986 Polymeric materials, cellular flexible -- Determination of stress-strain characteristics in compression -- Part 1: Low-density materials | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3386-1:1986/Amd 1:2010 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3386-2:1997 Flexible cellular polymeric materials -- Determination of stress-strain characteristics in compression -- Part 2: High-density materials | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3386-2:1997/Amd 1:2010 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3582:2000 Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame | 90.93 | 83.100 13.220.40 | ISO/TC 45/SC 4 |
| ISO 3582:2000/Amd 1:2007 | 60.60 | 83.100 13.220.40 | ISO/TC 45/SC 4 |
| ISO 3934:2002 Rubber, vulcanized and thermoplastic -- Preformed gaskets used in buildings -- Classification, specifications and test methods | 90.93 | 83.140.50 91.100.50 | ISO/TC 45/SC 4 |
| ISO 4633:2002 Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials | 90.92 | 83.140.50 91.140.60 91.140.80 | ISO/TC 45/SC 4 |
| ISO 4635:2011 Rubber, vulcanized -- Preformed joint seals for use between concrete paving sections of highways -- Specification | 60.60 | 83.140.50 91.100.50 | ISO/TC 45/SC 4 |
| ISO 4637:1979 Rubber-coated fabrics -- Determination of rubber-to-fabric adhesion -- Direct tension method | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 4638:1984 Polymeric materials, cellular flexible -- Determination of air flow permeability | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 4646:1989 Rubber- or plastics-coated fabrics -- Low-temperature impact test | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 4651:1988 Cellular rubbers and plastics -- Determination of dynamic cushioning performance | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 4651:1988/Amd 1:2006 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 4674-1:2003 Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 4674-2:1998 Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 2: Ballistic pendulum method | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 4675:1990 Rubber- or plastics-coated fabrics -- Low-temperature bend test | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5470-1:1999 Rubber- or plastics-coated fabrics -- Determination of abrasion resistance -- Part 1: Taber abrader | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5470-2:2003 Rubber- or plastics-coated fabrics -- Determination of abrasion resistance -- Part 2: Martindale abrader | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5473:1997 Rubber- or plastics-coated fabrics -- Determination of crush resistance | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5892:1981 Rubber building gaskets -- Materials for preformed solid vulcanized structural gaskets -- Specification | 90.92 | 83.140.50 91.100.50 | ISO/TC 45/SC 4 |
| ISO 5978:1990 Rubber- or plastics-coated fabrics -- Determination of blocking resistance | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5979:1982 Rubber or plastics coated fabrics -- Determination of flexibility -- Flat loop method | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5981:2007 Rubber- or plastics-coated fabrics -- Determination of resistance to combined shear flexing and rubbing | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5999:2007 Flexible cellular polymeric materials -- Polyurethane foam for load-bearing applications excluding carpet underlay -- Specification | 90.92 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6072:2011 Rubber -- Compatibility between hydraulic fluids and standard elastomeric materials | 60.60 | 23.100.01 83.140.01 | ISO/TC 45/SC 4 |
| ISO 6123-1:1982 Rubber or plastics covered rollers -- Specifications -- Part 1: Requirements for hardness | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 6123-2:1988 Rubber- or plastics-covered rollers -- Specifications -- Part 2: Surface characteristics | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 6123-3:1985 Rubber- or plastics-covered rollers -- Specifications -- Part 3: Dimensional tolerances | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 6446:1994 Rubber products -- Bridge bearings -- Specification for rubber materials | 90.93 | 83.140.99 93.040 | ISO/TC 45/SC 4 |
| ISO 6447:1983 Rubber seals -- Joint rings used for gas supply pipes and fittings -- Specification for material | 90.93 | 83.140.50 75.200 91.140.40 | ISO/TC 45/SC 4 |
| ISO 6448:1985 Rubber seals -- Joint rings used for petroleum product supply pipes and fittings -- Specification for material | 90.93 | 75.200 83.140.50 | ISO/TC 45/SC 4 |
| ISO 6450:2005 Rubber- or plastics-coated fabrics -- Determination of resistance to liquids | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 6451:1982 Plastics coated fabrics -- Polyvinyl chloride coatings -- Rapid method for checking fusion | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 6452:2007 Rubber- or plastics-coated fabrics -- Determination of fogging characteristics of trim materials in the interior of automobiles | 90.93 | 59.080.40 43.040.60 | ISO/TC 45/SC 4 |
| ISO 6453:1985 Polymeric materials, cellular flexible -- Polyvinylchloride foam sheeting -- Specification | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6915:1991 Flexible cellular polymeric materials -- Polyurethane foam for laminate use -- Specification | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6916-1:1995 Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 1: Sheeting | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6916-1:1995/Cor 1:2002 Sheeting | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6916-1:1995/Amd 1:2007 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6916-2:2001 Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 2: Mouldings and extrusions | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 7229:1997 Rubber- or plastics-coated fabrics -- Measurement of gas permeability | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 7231:2010 Polymeric materials, cellular, flexible -- Determination of air flow value at constant pressure-drop | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 7617-1:2001 Plastics-coated fabrics for upholstery -- Part 1: Specification for PVC-coated knitted fabrics | 90.93 | 59.080.40 97.140 | ISO/TC 45/SC 4 |
| ISO 7617-2:2003 Plastics-coated fabrics for upholstery -- Part 2: Specification for PVC-coated woven fabrics | 90.20 | 59.080.40 97.140 | ISO/TC 45/SC 4 |
| ISO 7617-3:1988 Plastics-coated fabrics for upholstery -- Part 3: Specification for polyurethane-coated woven fabrics | 90.20 | 59.080.40 97.140 | ISO/TC 45/SC 4 |
| ISO/TR 7620:2005 Rubber materials -- Chemical resistance | 90.20 | 83.060 | ISO/TC 45/SC 4 |
| ISO/TR 7621:1982 Rubber or plastics covered rollers -- Enquiries and orders -- Recommendations for technical information to be supplied by purchaser | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 7854:1995 Rubber- or plastics-coated fabrics -- Determination of resistance to damage by flexing | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 8067:2008 Flexible cellular polymeric materials -- Determination of tear strength | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 8095:1990 PVC-coated fabrics for tarpaulins -- Specification | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 8096:2005 Rubber- or plastics-coated fabrics for water-resistant clothing -- Specification | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 8096:2005/Cor 1:2005 | 60.60 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 8307:2007 Flexible cellular polymeric materials -- Determination of resilience by ball rebound | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO/TR 8517:1988 Rubber- or plastics-covered rollers -- Glossary | 90.93 | 83.140.99 01.040.83 | ISO/TC 45/SC 4 |
| ISO 9631:2003 Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 degrees C -- Specification for the material | 90.20 | 83.140.50 | ISO/TC 45/SC 4 |
| ISO 9691:1992 Rubber -- Recommendations for the workmanship of pipe joint rings -- Description and classification of imperfections | 90.20 | 23.040.80 | ISO/TC 45/SC 4 |
| ISO 10066:1991 Flexible cellular polymeric materials -- Determination of creep in compression | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 10282:2002 Single-use sterile rubber surgical gloves -- Specification | 90.92 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO 10282:2002/Cor 1:2005 | 60.60 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO 11193-1:2008 Single-use medical examination gloves -- Part 1: Specification for gloves made from rubber latex or rubber solution | 90.92 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO 11193-1:2008/Amd 1:2012 | 60.60 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO 11193-2:2006 Single-use medical examination gloves -- Part 2: Specification for gloves made from poly(vinyl chloride) | 90.93 | 11.140 83.140.99 | ISO/TC 45/SC 4 |
| ISO 11752:2000 Flexible cellular polymeric materials -- Moulded and extruded sponge or expanded cellular rubber products -- Compressibility test on finished parts | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 11752:2000/Amd 1:2006 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 13362:2000 Flexible cellular polymeric materials -- Determination of compression set under humid conditions | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 16010:2005 Elastomeric seals -- Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids | 90.20 | 83.140.50 | ISO/TC 45/SC 4 |
| ISO 22762-1:2010 Elastomeric seismic-protection isolators -- Part 1: Test methods | 60.60 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 22762-2:2010 Elastomeric seismic-protection isolators -- Part 2: Applications for bridges -- Specifications | 60.60 | 93.040 83.140.99 | ISO/TC 45/SC 4 |
| ISO 22762-3:2010 Elastomeric seismic-protection isolators -- Part 3: Applications for buildings -- Specifications | 60.60 | 91.120.25 83.140.99 | ISO/TC 45/SC 4 |
| ISO 23711:2003 Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers | 90.20 | 91.140.60 91.140.80 83.140.50 | ISO/TC 45/SC 4 |
| ISO 24999:2008 Flexible cellular polymeric materials -- Determination of fatigue by a constant-strain procedure | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 25518:2009 Single-use rubber gloves for general applications -- Specification | 60.60 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 32100:2010 Rubber- or plastics-coated fabrics -- Physical and mechanical tests -- Determination of flex resistance by the flexometer method | 60.60 | 59.080.40 | ISO/TC 45/SC 4 |
