Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 34-1:2010 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces | 60.60 | 83.060 |
| ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces | 60.60 | 83.060 |
| ISO 36:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics | 60.60 | 83.060 59.080.40 |
| ISO 37:2011 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties | 60.60 | 83.060 |
| ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD) | 60.60 | 83.060 |
| ISO 132:2011 Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia) | 60.60 | 83.060 |
| ISO 188:2011 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests | 60.60 | 83.060 |
| ISO 247:2006 Rubber -- Determination of ash | 90.93 | 83.060 |
| ISO 248-1:2011 Rubber, raw -- Determination of volatile-matter content -- Part 1: Hot-mill method and oven method | 60.60 | 83.040.10 |
| ISO 248-2:2012 Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit | 60.60 | 83.040.10 |
| ISO/DIS 249 Rubber, raw natural -- Determination of dirt content | 40.20 | 83.040.10 |
| ISO 249:1995 Rubber, raw natural -- Determination of dirt content | 90.92 | 83.040.10 |
| ISO/DIS 289-1 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity | 40.60 | 83.060 |
| ISO 289-1:2005 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity | 90.92 | 83.060 |
| ISO 289-1:2005/Cor 1:2009 | 60.60 | 83.060 |
| ISO 289-2:1994 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 2: Determination of pre-vulcanization characteristics | 90.93 | 83.060 |
| ISO 289-3:1999 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR | 90.93 | 83.060 |
| ISO 289-4:2003 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate | 90.20 | 83.060 |
| ISO 812:2011 Rubber, vulcanized or thermoplastic -- Determination of low-temperature brittleness | 60.60 | 83.060 |
| ISO 813:2010 Rubber, vulcanized or thermoplastic -- Determination of adhesion to a rigid substrate -- 90 degree peel method | 60.60 | 83.060 |
| ISO 814:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to metal -- Two-plate method | 60.60 | 83.060 |
| ISO/DIS 815-1 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures | 40.60 | 83.060 |
| ISO 815-1:2008 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures | 90.92 | 83.060 |
| ISO 815-2:2008 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures | 90.92 | 83.060 |
| ISO/DIS 815-2 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures | 40.60 | 83.060 |
| ISO 1407:2011 Rubber -- Determination of solvent extract | 60.60 | 83.060 |
| ISO 1408:1995 Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods | 90.93 | 83.060 |
| ISO 1409:2006 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of surface tension by the ring method | 90.93 | 83.080.01 83.040.10 |
| ISO 1431-1:2012 Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing | 60.60 | 83.060 |
| ISO 1431-3:2000 Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers | 90.93 | 83.060 |
| ISO 1432:2013 Rubber, vulcanized or thermoplastic -- Determination of low-temperature stiffening (Gehman test) | 60.60 | 83.060 |
| ISO/DIS 1656 Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content | 40.20 | 83.040.10 |
| ISO 1656:1996 Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content | 90.92 | 83.040.10 |
| ISO 1657:1986 Rubber, raw and rubber latex -- Determination of iron content -- 1,10-Phenanthroline photometric method | 90.93 | 83.040.10 |
| ISO 1817:2011 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids | 90.92 | 83.060 |
| ISO/NP 1817 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids | 10.99 | 83.060 |
| ISO 1827:2011 Rubber, vulcanized or thermoplastic -- Determination of shear modulus and adhesion to rigid plates -- Quadruple-shear methods | 60.60 | 83.060 |
| ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic -- Measurement of resistivity | 60.60 | 83.060 |
| ISO 2007:2007 Rubber, unvulcanized -- Determination of plasticity -- Rapid-plastimeter method | 90.93 | 83.060 |
| ISO 2285:2013 Rubber, vulcanized or thermoplastic -- Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load | 60.60 | 83.060 |
| ISO 2453:1991 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method | 90.93 | 83.040.10 |
| ISO 2453:1991/Cor 1:2003 | 60.60 | 83.040.10 |
| ISO 2454:1995 Rubber products -- Determination of zinc content -- EDTA titrimetric method | 90.93 | 83.060 |
| ISO 2781:2008 Rubber, vulcanized or thermoplastic -- Determination of density | 90.93 | 83.060 |
| ISO 2781:2008/Amd 1:2010 Precision data | 60.60 | 83.060 |
| ISO 2782-1:2012 Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods | 90.92 | 83.060 |
| ISO 2782-2:2012 Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 2: Equal-pressure method | 60.60 | 83.060 |
| ISO 2878:2011 Rubber, vulcanized or thermoplastic -- Antistatic and conductive products -- Determination of electrical resistance | 60.60 | 83.060 |
| ISO 2921:2011 Rubber, vulcanized -- Determination of low-temperature retraction (TR test) | 60.60 | 83.060 |
| ISO 2951:2012 Rubber, vulcanized or thermoplastic -- Determination of insulation resistance | 60.60 | 83.060 |
| ISO 3136:1983 Rubber latex -- Styrene-butadiene -- Determination of bound styrene content | 90.93 | 83.040.10 |
| ISO 3384-1:2011 Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 1: Testing at constant temperature | 60.60 | 83.060 |
| ISO 3384-1:2011/Amd 1:2013 Revised calibration schedule | 60.60 | 83.060 |
| ISO 3384-2:2012 Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling | 60.60 | 83.060 |
| ISO 3387:2012 Rubber -- Determination of crystallization effects by hardness measurements | 60.60 | 83.060 |
| ISO 3417:2008 Rubber -- Measurement of vulcanization characteristics with the oscillating disc curemeter | 90.93 | 83.060 |
| ISO 3865:2005 Rubber, vulcanized or thermoplastic -- Methods of test for staining in contact with organic material | 90.20 | 83.060 |
| ISO 3899:2005 Rubber -- Nitrile latex -- Determination of residual acrylonitrile content | 90.20 | 83.040.10 |
| ISO 3900:1995 Rubber -- Nitrile latex -- Determination of bound acrylonitrile content | 90.93 | 83.040.10 |
| ISO 4645:1984 Rubber and rubber products -- Guide to the identification of antidegradants -- Thin layer chromatographic methods | 90.93 | 83.060 |
| ISO 4645:1984/Cor 1:1991 | 60.60 | 83.060 |
| ISO 4647:2010 Rubber, vulcanized -- Determination of static adhesion to textile cord -- H-pull test | 60.60 | 83.060 |
| ISO 4649:2010 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device | 60.60 | 83.060 |
| ISO 4650:2012 Rubber -- Identification -- Infrared spectrometric methods | 60.60 | 83.060 |
| ISO 4655:1985 Rubber -- Reinforced styrene-butadiene latex -- Determination of total bound styrene content | 90.93 | 83.040.10 |
| ISO 4661-2:1987 Rubber, vulcanized -- Preparation of samples and test pieces -- Part 2: Chemical tests | 90.93 | 83.060 |
| ISO 4662:2009 Rubber, vulcanized or thermoplastic -- Determination of rebound resilience | 60.60 | 83.060 |
| ISO 4662:2009/Cor 1:2010 | 60.60 | 83.060 |
| ISO 4664-1:2011 Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 1: General guidance | 60.60 | 83.060 |
| ISO 4664-2:2006 Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 2: Torsion pendulum methods at low frequencies | 90.93 | 83.060 |
| ISO 4665:2006 Rubber, vulcanized or thermoplastic -- Resistance to weathering | 90.93 | 83.060 |
| ISO 4666-1:2010 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 1: Basic principles | 60.60 | 83.060 |
| ISO 4666-2:2008 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 2: Rotary flexometer | 90.93 | 83.060 |
| ISO 4666-3:2010 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 3: Compression flexometer (constant-strain type) | 60.60 | 83.060 |
| ISO 4666-4:2007 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 4: Constant-stress flexometer | 90.93 | 83.060 |
| ISO 5478:2006 Rubber -- Determination of styrene content -- Nitration method | 90.93 | 83.060 |
| ISO 5600:2011 Rubber -- Determination of adhesion to rigid materials using conical shaped parts | 60.60 | 83.060 |
| ISO 5603:2011 Rubber, vulcanized -- Determination of adhesion to wire cord | 60.60 | 83.060 |
| ISO 5893:2002 Rubber and plastics test equipment -- Tensile, flexural and compression types (constant rate of traverse) -- Specification | 90.93 | 83.200 |
| ISO 6101-1:1991 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 1: Determination of zinc content | 90.93 | 83.060 |
| ISO 6101-2:1997 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 2: Determination of lead content | 90.93 | 83.060 |
| ISO/DIS 6101-3 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content | 40.20 | 83.060 |
| ISO 6101-3:1997 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content | 90.92 | 83.060 |
| ISO/DIS 6101-4 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content | 40.20 | 83.060 |
| ISO 6101-4:1997 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content | 90.92 | 83.060 |
| ISO 6101-5:2006 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 5: Determination of iron content | 90.93 | 83.060 |
| ISO 6101-6:2011 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 6: Determination of magnesium content | 60.60 | 83.060 |
| ISO 6133:1998 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength | 90.20 | 83.060 83.080.01 |
| ISO 6179:2010 Rubber, vulcanized or thermoplastic -- Rubber sheets and rubber-coated fabrics -- Determination of transmission rate of volatile liquids (gravimetric technique) | 60.60 | 59.080.40 83.140.10 |
| ISO 6225-1:2006 Rubber, raw, natural -- Determination of castor oil content -- Part 1: Determination of castor oil glyceride content by thin-layer chromatography | 90.93 | 83.040.10 |
| ISO 6225-2:1990 Rubber, raw, natural -- Determination of castor oil content -- Part 2: Determination of total ricinoleic acid content by gas chromatography | 90.93 | 83.040.10 |
| ISO 6235:1995 Rubber, raw -- Determination of block polystyrene content -- Ozonolysis method | 90.93 | 83.040.10 |
| ISO 6502:1999 Rubber -- Guide to the use of curemeters | 90.93 | 83.060 |
| ISO 6505:2005 Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals | 90.20 | 83.060 |
| ISO 6528-1:1992 Rubber -- Determination of total sulfur content -- Part 1: Oxygen combustion flask method | 90.93 | 83.060 |
| ISO 6528-2:1992 Rubber -- Determination of total sulfur content -- Part 2: Sodium peroxide fusion method | 90.93 | 83.060 |
| ISO 6528-3:1988 Rubber -- Determination of total sulfur content -- Part 3: Furnace combustion method | 90.93 | 83.060 |
| ISO/DIS 6914 Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension | 40.60 | 83.060 |
| ISO 6914:2008 Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension | 90.92 | 83.060 |
| ISO 6943:2011 Rubber, vulcanized -- Determination of tension fatigue | 60.60 | 83.060 |
| ISO 7267-1:2008 Rubber-covered rollers -- Determination of apparent hardness -- Part 1: IRHD method | 90.93 | 83.140.99 |
| ISO 7267-2:2008 Rubber-covered rollers -- Determination of apparent hardness -- Part 2: Shore-type durometer method | 90.93 | 83.140.99 |
| ISO 7267-3:2011 Rubber-covered rollers -- Determination of apparent hardness -- Part 3: Pusey and Jones method | 60.60 | 83.140.99 |
| ISO 7269:1995 Rubber -- Determination of free sulfur | 90.93 | 83.060 |
| ISO 7269:1995/Cor 1:2002 | 60.60 | 83.060 |
| ISO 7270-1:2003 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends) | 90.20 | 83.060 |
| ISO 7270-1:2003/Amd 1:2010 | 60.60 | 83.060 |
| ISO 7270-2:2012 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene/butadiene/isoprene ratio | 60.60 | 83.060 |
| ISO 7323:2006 Rubber, raw and unvulcanized compounded -- Determination of plasticity number and recovery number -- Parallel-plate method | 90.93 | 83.060 83.040.10 |
| ISO 7619-1:2010 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) | 60.60 | 83.060 |
| ISO 7619-2:2010 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 2: IRHD pocket meter method | 60.60 | 83.060 |
| ISO 7725:1991 Rubber and rubber products -- Determination of bromine and chlorine content -- Oxygen flask combustion technique | 90.93 | 83.060 |
| ISO 7743:2011 Rubber, vulcanized or thermoplastic -- Determination of compression stress-strain properties | 60.60 | 83.060 |
| ISO 7780:1998 Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods | 90.93 | 83.060 83.040.10 |
| ISO 7781:2008 Styrene-butadiene rubber, raw -- Determination of soap and organic-acid content | 90.93 | 83.040.10 |
| ISO 8013:2012 Rubber, vulcanized -- Determination of creep in compression or shear | 60.60 | 83.060 |
| ISO 8053:1995 Rubber and latex -- Determination of copper content -- Photometric method | 90.93 | 83.060 83.040.10 |
| ISO 9026:2007 Raw rubber or unvulcanized compounds -- Determination of green strength | 90.93 | 83.060 83.040.10 |
| ISO 9028:2006 Rubber -- Dissolution by acid digestion | 90.93 | 83.060 |
| ISO/TR 9272:2005 Rubber and rubber products -- Determination of precision for test method standards | 90.20 | 83.060 83.140.01 |
| ISO 9924-1:2000 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers | 90.93 | 83.060 |
| ISO 9924-2:2000 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 2: Acrylonitrile-butadiene and halobutyl rubbers | 90.93 | 83.060 |
| ISO 9924-2:2000/Amd 1:2012 | 60.60 | 83.060 |
| ISO 9924-3:2009 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction | 60.60 | 83.060 |
| ISO 10398:1998 Rubber -- Identification of accelerators in cured and uncured compounds | 90.93 | 83.060 |
| ISO 10638:2010 Rubber -- Identification of antidegradants by gas chromatography/mass spectrometry | 60.60 | 83.040.20 83.040.10 |
| ISO 11089:2010 Rubber, raw synthetic -- Determination of antidegradants by high-performance liquid chromatography | 60.60 | 83.040.10 |
| ISO 11344:2004 Rubber, raw synthetic -- Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography | 90.92 | 83.040.10 |
| ISO 11344:2004/Cor 1:2008 | 60.60 | 83.040.10 |
| ISO 11345:2006 Rubber -- Assessment of carbon black and carbon black/silica dispersion -- Rapid comparative methods | 90.93 | 83.060 |
| ISO/DIS 11346 Rubber, vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use | 40.20 | 83.060 |
| ISO 11346:2004 Rubber, vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use | 90.92 | 83.060 |
| ISO/TR 12134:2010 Rubber -- Estimation of uncertainty for test methods -- Non-functional parameters | 60.60 | 83.060 |
| ISO 12492:2012 Rubber, raw -- Determination of water content by Karl Fischer method | 60.60 | 83.040.10 |
| ISO 12493:2011 Rubber, vulcanized -- Determination of stress in tension upon heating | 60.60 | 83.060 |
| ISO 12965:2000 Butadiene rubber -- Determination of microstructure by infra-red spectrometry | 90.93 | 83.060 |
| ISO 12965:2000/Cor 1:2006 | 60.60 | 83.060 |
| ISO 13145:2012 Rubber -- Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer | 60.60 | 83.060 |
| ISO 13226:2011 Rubber -- Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers | 60.60 | 83.060 |
| ISO 14309:2011 Rubber, vulcanized or thermoplastic -- Determination of volume and/or surface resistivity | 60.60 | 83.060 |
| ISO 14558:2000 Rubber -- Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy | 90.93 | 83.060 |
| ISO 15113:2005 Rubber -- Determination of frictional properties | 90.20 | 83.060 |
| ISO 15671:2000 Rubber and rubber additives -- Determination of total sulfur content using an automatic analyser | 90.93 | 83.060 |
| ISO 15672:2000 Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser | 90.93 | 83.060 |
| ISO 16564:2004 Rubber, raw natural -- Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) | 90.93 | 83.040.10 |
| ISO 16564:2004/Amd 1:2006 | 60.60 | 83.040.10 |
| ISO 16565:2013 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers | 60.60 | 83.060 |
| ISO 17052:2007 Rubber, raw -- Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography -- Thermal desorption (dynamic headspace) method | 90.93 | 83.040.10 |
| ISO/DIS 17257 Rubber -- Identification of polymers -- Pyrolytic gas-chromatographic method using mass-spectrometric detection | 40.60 | 83.060 |
| ISO 17564:2008 Raw hydrogenated nitrile rubber (HNBR) -- Determination of residual unsaturation by iodine value | 90.93 | 83.060 |
| ISO/PRF TS 17796 Rubber -- Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylene oxide) type sorbent using thermodesorption and gas chromatographic method with mass spectrometric detection | 50.20 | 83.060 |
| ISO 18517:2005 Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide | 90.20 | 83.060 |
| ISO/NP 18766 Rubber, vulcanized or thermoplastic -- Low temperature testing -- General introduction and guide | 10.99 | |
| ISO 18898:2012 Rubber -- Calibration and verification of hardness testers | 60.60 | 83.060 |
| ISO 18899:2004 Rubber -- Guide to the calibration of test equipment | 90.92 | 83.060 |
| ISO/FDIS 18899 Rubber -- Guide to the calibration of test equipment | 50.20 | 83.060 |
| ISO 19003:2006 Rubber and rubber products -- Guidance on the application of statistics to physical testing | 90.93 | 83.060 |
| ISO 19004:2004 Rubber and rubber products -- Determination of the sensitivity of test methods | 90.93 | 83.060 |
| ISO 21561:2005 Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR | 90.20 | 83.060 |
| ISO 21561:2005/Amd 1:2010 | 60.60 | 83.060 |
| ISO 22768:2006 Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC) | 90.93 | 83.040.10 83.060 |
| ISO 23233:2009 Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion using a driven, vertical abrasive disc | 60.60 | 83.060 |
| ISO 23337:2007 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using the Improved Lambourn test machine | 90.93 | 83.060 |
| ISO 23529:2010 Rubber -- General procedures for preparing and conditioning test pieces for physical test methods | 60.60 | 83.060 |
| ISO 23794:2010 Rubber, vulcanized or thermoplastic -- Abrasion testing -- Guidance | 90.92 | 83.060 |
| ISO 24453:2008 Rubber -- Acquisition and presentation of comparable single-point data | 90.93 | 83.060 |
| ISO 24454:2008 Rubber -- Acquisition and presentation of comparable multi-point data | 90.60 | 83.060 |
| ISO 24698-1:2008 Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 1: Combustion (Dumas) method | 90.93 | 83.040.10 |
| ISO 24698-2:2008 Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 2: Kjeldahl method | 90.93 | 83.040.10 |
| ISO 27588:2012 Rubber, vulcanized or thermoplastic -- Determination of dead-load hardness using the very low rubber hardness (VLRH) scale | 60.60 | 83.060 |
| ISO 27727:2008 Rubber, vulcanized -- Measurement of fatigue crack growth rate | 90.93 | 83.060 |
