Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 34-1:2010 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 35:2004 Natural rubber latex concentrate -- Determination of mechanical stability | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 35:2004/Amd 1:2006 Precision data | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 36:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics | 60.60 | 83.060 59.080.40 | ISO/TC 45/SC 2 |
| ISO 37:2011 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD) | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 123:2001 Rubber latex -- Sampling | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 124:2011 Latex, rubber -- Determination of total solids content | 90.92 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 125:2011 Natural rubber latex concentrate -- Determination of alkalinity | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 126:2005 Natural rubber latex concentrate -- Determination of dry rubber content | 90.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 127:2012 Rubber, natural latex concentrate -- Determination of KOH number | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 132:2011 Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia) | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 188:2011 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 247:2006 Rubber -- Determination of ash | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 248-1:2011 Rubber, raw -- Determination of volatile-matter content -- Part 1: Hot-mill method and oven method | 60.60 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 248-2:2012 Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit | 60.60 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 249:1995 Rubber, raw natural -- Determination of dirt content | 90.92 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 289-1:2005 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 289-1:2005/Cor 1:2009 | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 289-2:1994 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 2: Determination of pre-vulcanization characteristics | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 289-3:1999 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 289-4:2003 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate | 90.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO 498:1992 Natural rubber latex concentrate -- Preparation of dry films | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 506:1992 Rubber latex, natural, concentrate -- Determination of volatile fatty acid number | 90.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 705:1994 Rubber latex -- Determination of density between 5 degrees C and 40 degrees C | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 706:2004 Rubber latex -- Determination of coagulum content (sieve residue) | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 812:2011 Rubber, vulcanized or thermoplastic -- Determination of low-temperature brittleness | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 813:2010 Rubber, vulcanized or thermoplastic -- Determination of adhesion to a rigid substrate -- 90 degree peel method | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 814:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to metal -- Two-plate method | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 815-1:2008 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 815-2:2008 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 976:1996 Rubber and plastics -- Polymer dispersions and rubber latices -- Determination of pH | 90.92 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 976:1996/Amd 1:2006 Precision data | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 1124:1988 Rubber compounding ingredients -- Carbon black shipment sampling procedures | 90.20 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1125:1999 Rubber compounding ingredients -- Carbon black -- Determination of ash | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1125:1999/Amd 1:2011 Insertion of additional item in test report | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1126:2006 Rubber compounding ingredients -- Carbon black -- Determination of loss on heating | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1138:2007 Rubber compounding ingredients -- Carbon black -- Determination of sulfur content | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1138:2007/Amd 1:2012 Clarification of digestion temperature in Subclause 3.4.5 | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1304:2006 Rubber compounding ingredients -- Carbon black -- Determination of iodine adsorption number | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1306:1995 Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of pour density | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1307:2006 Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 1382:2012 Rubber -- Vocabulary | 60.60 | 83.060 01.040.83 | ISO/TC 45 |
| ISO 1401:1999 Rubber hoses for agricultural spraying | 90.93 | 65.060.25 83.140.40 65.060.40 | ISO/TC 45/SC 1 |
| ISO 1402:2009 Rubber and plastics hoses and hose assemblies -- Hydrostatic testing | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 1403:2005 Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification | 90.20 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 1407:2011 Rubber -- Determination of solvent extract | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 1408:1995 Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 1409:2006 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of surface tension by the ring method | 90.93 | 83.080.01 83.040.10 | ISO/TC 45/SC 2 |
| ISO 1419:1995 Rubber- or plastics-coated fabrics -- Accelerated-ageing tests | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 1420:2001 Rubber- or plastics-coated fabrics -- Determination of resistance to penetration by water | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 1421:1998 Rubber- or plastics-coated fabrics -- Determination of tensile strength and elongation at break | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 1431-1:2012 Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 1431-3:2000 Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 1432:2013 Rubber, vulcanized or thermoplastic -- Determination of low-temperature stiffening (Gehman test) | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 1434:1995 Natural rubber in bales -- Amount of bale coating -- Determination | 90.92 | 83.060 | ISO/TC 45/SC 3 |
| ISO 1435:1996 Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of fines content | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1436:2009 Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification | 60.60 | 83.140.40 23.100.40 | ISO/TC 45/SC 1 |
| ISO 1436:2009/Cor 1:2010 | 60.60 | 83.140.40 23.100.40 | ISO/TC 45/SC 1 |
| ISO 1437:2007 Rubber compounding ingredients -- Carbon black -- Determination of sieve residue | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 1629:1995 Rubber and latices -- Nomenclature | 90.92 | 83.060 83.040.10 01.040.83 | ISO/TC 45 |
| ISO 1629:1995/Amd 1:2007 | 60.60 | 83.060 83.040.10 01.040.83 | ISO/TC 45 |
| ISO 1629:1995/Amd 1:2007/Cor 1:2009 | 60.60 | 83.060 83.040.10 01.040.83 | ISO/TC 45 |
| ISO 1652:2011 Rubber latex -- Determination of apparent viscosity by the Brookfield test method | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 1656:1996 Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content | 90.92 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 1657:1986 Rubber, raw and rubber latex -- Determination of iron content -- 1,10-Phenanthroline photometric method | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 1658:2009 Natural rubber (NR) -- Evaluation procedure | 60.60 | 83.060 | ISO/TC 45/SC 3 |
| ISO 1795:2007 Rubber, raw natural and raw synthetic -- Sampling and further preparative procedures | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 1798:2008 Flexible cellular polymeric materials -- Determination of tensile strength and elongation at break | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 1802:1992 Natural rubber latex concentrate -- Determination of boric acid content | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 1817:2011 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 1823-1:1997 Rubber hoses and hose assemblies -- Part 1: On-shore oil suction and discharge -- Specification | 90.92 | 83.140.40 75.200 | ISO/TC 45/SC 1 |
| ISO 1823-2:1997 Rubber hoses and hose assemblies -- Part 2: Ship/dockside discharge -- Specification | 90.92 | 83.140.40 75.200 | ISO/TC 45/SC 1 |
| ISO 1825:2010 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling -- Specification | 60.60 | 83.140.40 49.100 | ISO/TC 45/SC 1 |
| ISO 1827:2011 Rubber, vulcanized or thermoplastic -- Determination of shear modulus and adhesion to rigid plates -- Quadruple-shear methods | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic -- Measurement of resistivity | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 1856:2000 Flexible cellular polymeric materials -- Determination of compression set | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 1856:2000/Amd 1:2007 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 2000:2003 Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR) | 90.92 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2004:2010 Natural rubber latex concentrate -- Centrifuged or creamed, ammonia-preserved types -- Specifications | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2005:1992 Rubber latex, natural, concentrate -- Determination of sludge content | 90.92 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2005:1992/Amd 1:2006 Precision data | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2006-1:2009 Rubber latex, synthetic -- Determination of mechanical stability -- Part 1: High-speed method | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2006-2:2009 Rubber latex, synthetic -- Determination of mechanical stability -- Part 2: Moderate-speed method under load | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2007:2007 Rubber, unvulcanized -- Determination of plasticity -- Rapid-plastimeter method | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2027:1990 Natural rubber latex concentrate, evaporated, preserved -- Specification | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2028:1999 Synthetic rubber latex -- Preparation of dry polymer | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2230:2002 Rubber products -- Guidelines for storage | 90.93 | 83.060 | ISO/TC 45/SC 4 |
| ISO 2231:1989 Rubber- or plastics-coated fabrics -- Standard atmospheres for conditioning and testing | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2285:2013 Rubber, vulcanized or thermoplastic -- Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2286-1:1998 Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 1: Methods for determination of length, width and net mass | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2286-2:1998 Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2286-3:1998 Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 3: Method for determination of thickness | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2302:2005 Isobutene-isoprene rubber (IIR) -- Evaluation procedures | 90.20 | 83.060 | ISO/TC 45/SC 3 |
| ISO 2303:2011 Isoprene rubber (IR) -- Non-oil-extended, solution-polymerized types -- Evaluation procedures | 60.60 | 83.060 | ISO/TC 45/SC 3 |
| ISO 2321:2006 Rubber threads -- Methods of test | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 2322:2009 Styrene-butadiene rubber (SBR) -- Emulsion- and solution-polymerized types -- Evaluation procedures | 90.92 | 83.060 | ISO/TC 45/SC 3 |
| ISO 2393:2008 Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures | 90.92 | 83.060 | ISO/TC 45/SC 3 |
| ISO 2398:2006 Rubber hoses, textile-reinforced, for compressed air -- Specification | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 2411:2000 Rubber- or plastics-coated fabrics -- Determination of coating adhesion | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 2439:2008 Flexible cellular polymeric materials -- Determination of hardness (indentation technique) | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 2440:1997 Flexible and rigid cellular polymeric materials -- Accelerated ageing tests | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 2440:1997/Amd 1:2010 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 2453:1991 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 2453:1991/Cor 1:2003 | 60.60 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 2454:1995 Rubber products -- Determination of zinc content -- EDTA titrimetric method | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2475:2011 Chloroprene rubber (CR) -- General-purpose types -- Evaluation procedure | 60.60 | 83.060 | ISO/TC 45/SC 3 |
| ISO 2476:2009 Butadiene rubber (BR) -- Solution-polymerized types -- Evaluation procedures | 90.92 | 83.060 | ISO/TC 45/SC 3 |
| ISO 2781:2008 Rubber, vulcanized or thermoplastic -- Determination of density | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2781:2008/Amd 1:2010 Precision data | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2782-1:2012 Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2782-2:2012 Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 2: Equal-pressure method | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2878:2011 Rubber, vulcanized or thermoplastic -- Antistatic and conductive products -- Determination of electrical resistance | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2921:2011 Rubber, vulcanized -- Determination of low-temperature retraction (TR test) | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification | 90.20 | 83.140.40 75.200 | ISO/TC 45/SC 1 |
| ISO 2929:2002 Rubber hoses and hose assemblies for bulk fuel delivery by truck -- Specification | 90.92 | 83.140.40 75.200 | ISO/TC 45/SC 1 |
| ISO 2930:2009 Rubber, raw natural -- Determination of plasticity retention index (PRI) | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 2951:2012 Rubber, vulcanized or thermoplastic -- Determination of insulation resistance | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 3011:1997 Rubber- or plastics-coated fabrics -- Determination of resistance to ozone cracking under static conditions | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 3136:1983 Rubber latex -- Styrene-butadiene -- Determination of bound styrene content | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 3257:1992 Rubber compounding ingredients -- Carbon black -- Method of evaluation in styrene-butadiene rubbers | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 3302-1:1996 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances | 90.92 | 83.140.01 | ISO/TC 45/SC 4 |
| ISO 3302-1:1996/Amd 1:2001 Classification system for flash | 60.60 | 83.140.01 | ISO/TC 45/SC 4 |
| ISO 3302-2:2008 Rubber -- Tolerances for products -- Part 2: Geometrical tolerances | 90.93 | 83.140.01 | ISO/TC 45/SC 4 |
| ISO 3303-1:2012 Rubber- or plastics-coated fabrics -- Determination of bursting strength -- Part 1: Steel-ball method | 60.60 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 3303-2:2012 Rubber- or plastics-coated fabrics -- Determination of bursting strength -- Part 2: Hydraulic method | 60.60 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 3384-1:2011 Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 1: Testing at constant temperature | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 3384-1:2011/Amd 1:2013 Revised calibration schedule | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 3384-2:2012 Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 3385:1989 Flexible cellular polymeric materials -- Determination of fatigue by constant-load pounding | 90.92 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3386-1:1986 Polymeric materials, cellular flexible -- Determination of stress-strain characteristics in compression -- Part 1: Low-density materials | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3386-1:1986/Amd 1:2010 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3386-2:1997 Flexible cellular polymeric materials -- Determination of stress-strain characteristics in compression -- Part 2: High-density materials | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3386-2:1997/Amd 1:2010 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 3387:2012 Rubber -- Determination of crystallization effects by hardness measurements | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 3417:2008 Rubber -- Measurement of vulcanization characteristics with the oscillating disc curemeter | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 3582:2000 Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame | 90.93 | 83.100 13.220.40 | ISO/TC 45/SC 4 |
| ISO 3582:2000/Amd 1:2007 | 60.60 | 83.100 13.220.40 | ISO/TC 45/SC 4 |
| ISO 3858:2008 Rubber compounding ingredients -- Carbon black -- Determination of light transmittance of toluene extract | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 3861:2005 Rubber hoses for sand and grit blasting -- Specification | 90.20 | 25.220.10 83.140.40 | ISO/TC 45/SC 1 |
| ISO 3862:2009 Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids -- Specification | 60.60 | 23.100.40 83.140.40 | ISO/TC 45/SC 1 |
| ISO 3865:2005 Rubber, vulcanized or thermoplastic -- Methods of test for staining in contact with organic material | 90.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO 3899:2005 Rubber -- Nitrile latex -- Determination of residual acrylonitrile content | 90.20 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 3900:1995 Rubber -- Nitrile latex -- Determination of bound acrylonitrile content | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 3934:2002 Rubber, vulcanized and thermoplastic -- Preformed gaskets used in buildings -- Classification, specifications and test methods | 90.93 | 83.140.50 91.100.50 | ISO/TC 45/SC 4 |
| ISO 3949:2009 Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications -- Specification | 60.60 | 83.140.40 23.100.40 | ISO/TC 45/SC 1 |
| ISO 3994:2007 Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification | 90.92 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 4023:2009 Rubber hoses and hose assemblies for steam -- Test methods | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 4079:2009 Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids -- Specification | 60.60 | 83.140.40 23.100.40 | ISO/TC 45/SC 1 |
| ISO 4080:2009 Rubber and plastics hoses and hose assemblies -- Determination of permeability to gas | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 4081:2010 Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification | 60.60 | 43.040.01 83.140.40 | ISO/TC 45/SC 1 |
| ISO 4097:2007 Rubber, ethylene-propylene-diene (EPDM) -- Evaluation procedure | 90.92 | 83.060 | ISO/TC 45/SC 3 |
| ISO 4633:2002 Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials | 90.92 | 83.140.50 91.140.60 91.140.80 | ISO/TC 45/SC 4 |
| ISO 4635:2011 Rubber, vulcanized -- Preformed joint seals for use between concrete paving sections of highways -- Specification | 60.60 | 83.140.50 91.100.50 | ISO/TC 45/SC 4 |
| ISO 4637:1979 Rubber-coated fabrics -- Determination of rubber-to-fabric adhesion -- Direct tension method | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 4638:1984 Polymeric materials, cellular flexible -- Determination of air flow permeability | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 4641:2010 Rubber hoses and hose assemblies for water suction and discharge -- Specification | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 4642-1:2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems | 60.60 | 83.140.40 13.220.10 | ISO/TC 45/SC 1 |
| ISO 4642-2:2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles | 60.60 | 13.220.10 83.140.40 | ISO/TC 45/SC 1 |
| ISO 4645:1984 Rubber and rubber products -- Guide to the identification of antidegradants -- Thin layer chromatographic methods | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4645:1984/Cor 1:1991 | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4646:1989 Rubber- or plastics-coated fabrics -- Low-temperature impact test | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 4647:2010 Rubber, vulcanized -- Determination of static adhesion to textile cord -- H-pull test | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4649:2010 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4650:2012 Rubber -- Identification -- Infrared spectrometric methods | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4651:1988 Cellular rubbers and plastics -- Determination of dynamic cushioning performance | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 4651:1988/Amd 1:2006 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 4652:2012 Rubber compounding ingredients -- Carbon black -- Determination of specific surface area by nitrogen adsorption methods -- Single-point procedures | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 4655:1985 Rubber -- Reinforced styrene-butadiene latex -- Determination of total bound styrene content | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 4656:2012 Rubber compounding ingredients -- Carbon black -- Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) -- Evaluation procedure | 90.93 | 83.060 | ISO/TC 45/SC 3 |
| ISO 4658:1999/Amd 1:2004 | 60.60 | 83.060 | ISO/TC 45/SC 3 |
| ISO 4659:2003 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) -- Evaluation procedure | 90.20 | 83.060 | ISO/TC 45/SC 3 |
| ISO 4660:2011 Rubber, raw natural -- Colour index test | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 4661-2:1987 Rubber, vulcanized -- Preparation of samples and test pieces -- Part 2: Chemical tests | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4662:2009 Rubber, vulcanized or thermoplastic -- Determination of rebound resilience | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4662:2009/Cor 1:2010 | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4664-1:2011 Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 1: General guidance | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4664-2:2006 Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 2: Torsion pendulum methods at low frequencies | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4665:2006 Rubber, vulcanized or thermoplastic -- Resistance to weathering | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4666-1:2010 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 1: Basic principles | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4666-2:2008 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 2: Rotary flexometer | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4666-3:2010 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 3: Compression flexometer (constant-strain type) | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4666-4:2007 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 4: Constant-stress flexometer | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 4671:2007 Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies | 90.93 | 83.140.40 23.040.70 | ISO/TC 45/SC 1 |
| ISO 4671:2007/Amd 1:2011 Clarification of position at which outside diameter is measured | 60.60 | 83.140.40 23.040.70 | ISO/TC 45/SC 1 |
| ISO 4674-1:2003 Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 4674-2:1998 Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 2: Ballistic pendulum method | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 4675:1990 Rubber- or plastics-coated fabrics -- Low-temperature bend test | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5435:2008 Rubber compounding ingredients -- Carbon black -- Determination of tinting strength | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 5470-1:1999 Rubber- or plastics-coated fabrics -- Determination of abrasion resistance -- Part 1: Taber abrader | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5470-2:2003 Rubber- or plastics-coated fabrics -- Determination of abrasion resistance -- Part 2: Martindale abrader | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5473:1997 Rubber- or plastics-coated fabrics -- Determination of crush resistance | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5478:2006 Rubber -- Determination of styrene content -- Nitration method | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 5600:2011 Rubber -- Determination of adhesion to rigid materials using conical shaped parts | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 5603:2011 Rubber, vulcanized -- Determination of adhesion to wire cord | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia -- Specification | 90.93 | 83.140.40 71.120.99 | ISO/TC 45/SC 1 |
| ISO 5772:1998 Rubber hoses and hose assemblies for measured fuel dispensing -- Specification | 90.92 | 75.200 83.140.40 | ISO/TC 45/SC 1 |
| ISO 5774:2006 Plastics hoses -- Textile-reinforced types for compressed-air applications -- Specification | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 5794-1:2010 Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 1: Non-rubber tests | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 5794-2:1998 Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 2: Evaluation procedures in styrene-butadiene rubber | 90.20 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 5794-3:2011 Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 5796:2000 Rubber compounding ingredients -- Natural calcium carbonate -- Test methods | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 5892:1981 Rubber building gaskets -- Materials for preformed solid vulcanized structural gaskets -- Specification | 90.92 | 83.140.50 91.100.50 | ISO/TC 45/SC 4 |
| ISO 5893:2002 Rubber and plastics test equipment -- Tensile, flexural and compression types (constant rate of traverse) -- Specification | 90.93 | 83.200 | ISO/TC 45/SC 2 |
| ISO 5978:1990 Rubber- or plastics-coated fabrics -- Determination of blocking resistance | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5979:1982 Rubber or plastics coated fabrics -- Determination of flexibility -- Flat loop method | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5981:2007 Rubber- or plastics-coated fabrics -- Determination of resistance to combined shear flexing and rubbing | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 5999:2007 Flexible cellular polymeric materials -- Polyurethane foam for load-bearing applications excluding carpet underlay -- Specification | 90.92 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6072:2011 Rubber -- Compatibility between hydraulic fluids and standard elastomeric materials | 60.60 | 23.100.01 83.140.01 | ISO/TC 45/SC 4 |
| ISO 6101-1:1991 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 1: Determination of zinc content | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6101-2:1997 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 2: Determination of lead content | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6101-3:1997 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6101-4:1997 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6101-5:2006 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 5: Determination of iron content | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6101-6:2011 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 6: Determination of magnesium content | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6123-1:1982 Rubber or plastics covered rollers -- Specifications -- Part 1: Requirements for hardness | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 6123-2:1988 Rubber- or plastics-covered rollers -- Specifications -- Part 2: Surface characteristics | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 6123-3:1985 Rubber- or plastics-covered rollers -- Specifications -- Part 3: Dimensional tolerances | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 6133:1998 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength | 90.20 | 83.060 83.080.01 | ISO/TC 45/SC 2 |
| ISO 6134:2005 Rubber hoses and hose assemblies for saturated steam -- Specification | 90.20 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 6179:2010 Rubber, vulcanized or thermoplastic -- Rubber sheets and rubber-coated fabrics -- Determination of transmission rate of volatile liquids (gravimetric technique) | 60.60 | 59.080.40 83.140.10 | ISO/TC 45/SC 2 |
| ISO 6209:2009 Rubber compounding ingredients -- Carbon black -- Determination of solvent-extractable material | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications -- Specification | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 6225-1:2006 Rubber, raw, natural -- Determination of castor oil content -- Part 1: Determination of castor oil glyceride content by thin-layer chromatography | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 6225-2:1990 Rubber, raw, natural -- Determination of castor oil content -- Part 2: Determination of total ricinoleic acid content by gas chromatography | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 6235:1995 Rubber, raw -- Determination of block polystyrene content -- Ozonolysis method | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 6446:1994 Rubber products -- Bridge bearings -- Specification for rubber materials | 90.93 | 83.140.99 93.040 | ISO/TC 45/SC 4 |
| ISO 6447:1983 Rubber seals -- Joint rings used for gas supply pipes and fittings -- Specification for material | 90.93 | 83.140.50 75.200 91.140.40 | ISO/TC 45/SC 4 |
| ISO 6448:1985 Rubber seals -- Joint rings used for petroleum product supply pipes and fittings -- Specification for material | 90.93 | 75.200 83.140.50 | ISO/TC 45/SC 4 |
| ISO 6450:2005 Rubber- or plastics-coated fabrics -- Determination of resistance to liquids | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 6451:1982 Plastics coated fabrics -- Polyvinyl chloride coatings -- Rapid method for checking fusion | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 6452:2007 Rubber- or plastics-coated fabrics -- Determination of fogging characteristics of trim materials in the interior of automobiles | 90.93 | 59.080.40 43.040.60 | ISO/TC 45/SC 4 |
| ISO 6453:1985 Polymeric materials, cellular flexible -- Polyvinylchloride foam sheeting -- Specification | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6472:2010 Rubber compounding ingredients -- Symbols and abbreviated terms | 60.60 | 01.040.83 83.040.20 | ISO/TC 45 |
| ISO 6502:1999 Rubber -- Guide to the use of curemeters | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6505:2005 Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals | 90.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6528-1:1992 Rubber -- Determination of total sulfur content -- Part 1: Oxygen combustion flask method | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6528-2:1992 Rubber -- Determination of total sulfur content -- Part 2: Sodium peroxide fusion method | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6528-3:1988 Rubber -- Determination of total sulfur content -- Part 3: Furnace combustion method | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6801:1983 Rubber or plastics hoses -- Determination of volumetric expansion | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 6801:1983/Amd 1:2011 Deletion of alcohol as pressurizing fluid | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 6802:2005 Rubber and plastics hoses and hose assemblies with wire reinforcements -- Hydraulic impulse test with flexing | 90.20 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 6803:2008 Rubber or plastics hoses and hose assemblies -- Hydraulic-pressure impulse test without flexing | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 6804:2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers -- Specification | 60.60 | 97.060 97.040.40 83.140.40 | ISO/TC 45/SC 1 |
| ISO 6805:1994 Rubber hoses and hose assemblies for underground mining -- Wire-reinforced hydraulic types for coal mining -- Specification | 90.93 | 73.100.30 83.140.40 | ISO/TC 45/SC 1 |
| ISO 6806:1992 Rubber hoses and hose assemblies for use in oil burners -- Specification | 90.92 | 27.060.10 83.140.40 | ISO/TC 45/SC 1 |
| ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications -- Specification | 90.20 | 75.180.10 83.140.40 | ISO/TC 45/SC 1 |
| ISO 6808:1999 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids -- Specification | 90.92 | 75.200 83.140.40 | ISO/TC 45/SC 1 |
| ISO 6914:2008 Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 6915:1991 Flexible cellular polymeric materials -- Polyurethane foam for laminate use -- Specification | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6916-1:1995 Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 1: Sheeting | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6916-1:1995/Amd 1:2007 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6916-1:1995/Cor 1:2002 Sheeting | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6916-2:2001 Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 2: Mouldings and extrusions | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 6943:2011 Rubber, vulcanized -- Determination of tension fatigue | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7229:1997 Rubber- or plastics-coated fabrics -- Measurement of gas permeability | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 7231:2010 Polymeric materials, cellular, flexible -- Determination of air flow value at constant pressure-drop | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 7233:2006 Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 7267-1:2008 Rubber-covered rollers -- Determination of apparent hardness -- Part 1: IRHD method | 90.93 | 83.140.99 | ISO/TC 45/SC 2 |
| ISO 7267-2:2008 Rubber-covered rollers -- Determination of apparent hardness -- Part 2: Shore-type durometer method | 90.93 | 83.140.99 | ISO/TC 45/SC 2 |
| ISO 7267-3:2011 Rubber-covered rollers -- Determination of apparent hardness -- Part 3: Pusey and Jones method | 60.60 | 83.140.99 | ISO/TC 45/SC 2 |
| ISO 7269:1995 Rubber -- Determination of free sulfur | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7269:1995/Cor 1:2002 | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7270-1:2003 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends) | 90.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7270-1:2003/Amd 1:2010 | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7270-2:2012 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene/butadiene/isoprene ratio | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7323:2006 Rubber, raw and unvulcanized compounded -- Determination of plasticity number and recovery number -- Parallel-plate method | 90.93 | 83.060 83.040.10 | ISO/TC 45/SC 2 |
| ISO 7326:2006 Rubber and plastics hoses -- Assessment of ozone resistance under static conditions | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 7617-1:2001 Plastics-coated fabrics for upholstery -- Part 1: Specification for PVC-coated knitted fabrics | 90.93 | 59.080.40 97.140 | ISO/TC 45/SC 4 |
| ISO 7617-2:2003 Plastics-coated fabrics for upholstery -- Part 2: Specification for PVC-coated woven fabrics | 90.20 | 59.080.40 97.140 | ISO/TC 45/SC 4 |
| ISO 7617-3:1988 Plastics-coated fabrics for upholstery -- Part 3: Specification for polyurethane-coated woven fabrics | 90.20 | 59.080.40 97.140 | ISO/TC 45/SC 4 |
| ISO 7619-1:2010 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7619-2:2010 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 2: IRHD pocket meter method | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO/TR 7620:2005 Rubber materials -- Chemical resistance | 90.20 | 83.060 | ISO/TC 45/SC 4 |
| ISO/TR 7621:1982 Rubber or plastics covered rollers -- Enquiries and orders -- Recommendations for technical information to be supplied by purchaser | 90.93 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 7662:1988 Rubber and plastics hoses -- Determination of abrasion of lining | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 7663:2005 Halogenated isobutene-isoprene rubber (BIIR and CIIR) -- Evaluation procedures | 90.20 | 83.060 | ISO/TC 45/SC 3 |
| ISO 7664:2000 Rubber, raw natural and raw synthetic -- General guidance on storage | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 7725:1991 Rubber and rubber products -- Determination of bromine and chlorine content -- Oxygen flask combustion technique | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7743:2011 Rubber, vulcanized or thermoplastic -- Determination of compression stress-strain properties | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 7751:1991 Rubber and plastics hoses and hose assemblies -- Ratios of proof and burst pressure to maximum working pressure | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 7751:1991/Amd 1:2011 Replacement of "design working pressure" by "maximum working pressure" throughout text | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 7780:1998 Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods | 90.93 | 83.060 83.040.10 | ISO/TC 45/SC 2 |
| ISO 7781:2008 Styrene-butadiene rubber, raw -- Determination of soap and organic-acid content | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 7854:1995 Rubber- or plastics-coated fabrics -- Determination of resistance to damage by flexing | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 8013:2012 Rubber, vulcanized -- Determination of creep in compression or shear | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 8028:1999 Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification | 90.93 | 83.140.40 87.100 | ISO/TC 45/SC 1 |
| ISO 8029:2007 Plastics hose -- General-purpose collapsible water hose, textile-reinforced -- Specification | 90.92 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 8030:1995 Rubber and plastics hoses -- Method of test for flammability | 90.92 | 23.040.70 13.220.40 | ISO/TC 45/SC 1 |
| ISO 8031:2009 Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance and conductivity | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 8032:1997 Rubber and plastics hose assemblies -- Flexing combined with hydraulic impulse test (half-omega test) | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 8033:2006 Rubber and plastics hoses -- Determination of adhesion between components | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 8053:1995 Rubber and latex -- Determination of copper content -- Photometric method | 90.93 | 83.060 83.040.10 | ISO/TC 45/SC 2 |
| ISO 8066-2:2001 Rubber and plastics hoses and hose assemblies for automotive air conditioning -- Specification -- Part 2: Refrigerant 134a | 90.93 | 43.040.60 83.140.40 | ISO/TC 45/SC 1 |
| ISO 8067:2008 Flexible cellular polymeric materials -- Determination of tear strength | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 8095:1990 PVC-coated fabrics for tarpaulins -- Specification | 90.93 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 8096:2005 Rubber- or plastics-coated fabrics for water-resistant clothing -- Specification | 90.20 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 8096:2005/Cor 1:2005 | 60.60 | 59.080.40 | ISO/TC 45/SC 4 |
| ISO 8307:2007 Flexible cellular polymeric materials -- Determination of resilience by ball rebound | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 8308:2006 Rubber and plastics hoses and tubing -- Determination of transmission of liquids through hose and tubing walls | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 8312:1999 Rubber compounding ingredients -- Stearic acid -- Definition and test methods | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 8330:2007 Rubber and plastics hoses and hose assemblies -- Vocabulary | 90.92 | 23.040.70 01.040.23 | ISO/TC 45/SC 1 |
| ISO 8331:2007 Rubber and plastics hoses and hose assemblies -- Guidelines for selection, storage, use and maintenance | 90.92 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 8332:2011 Rubber compounding ingredients -- Sulfur -- Methods of test | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO/TR 8354:1987 Rubber hoses and hose assemblies for underground mining -- Textile-reinforced air and water type | 90.93 | 83.140.40 73.100.30 | ISO/TC 45/SC 1 |
| ISO 8511:2011 Rubber compounding ingredients -- Carbon black -- Determination of pellet size distribution | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO/TR 8517:1988 Rubber- or plastics-covered rollers -- Glossary | 90.93 | 83.140.99 01.040.83 | ISO/TC 45/SC 4 |
| ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles -- Specification | 60.60 | 83.140.40 43.060.40 | ISO/TC 45/SC 1 |
| ISO 8942:2010 Rubber compounding ingredients -- Carbon black -- Determination of individual pellet crushing strength | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 9026:2007 Raw rubber or unvulcanized compounds -- Determination of green strength | 90.93 | 83.060 83.040.10 | ISO/TC 45/SC 2 |
| ISO 9028:2006 Rubber -- Dissolution by acid digestion | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 9252:1989 Synthetic rubber latex -- Microbiological examination | 90.93 | 83.040.10 07.100.99 | ISO/TC 45/SC 3 |
| ISO/TR 9272:2005 Rubber and rubber products -- Determination of precision for test method standards | 90.20 | 83.060 83.140.01 | ISO/TC 45/SC 2 |
| ISO 9298:1995 Rubber compounding ingredients -- Zinc oxide -- Test methods | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 9631:2003 Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 degrees C -- Specification for the material | 90.20 | 83.140.50 | ISO/TC 45/SC 4 |
| ISO 9691:1992 Rubber -- Recommendations for the workmanship of pipe joint rings -- Description and classification of imperfections | 90.20 | 23.040.80 | ISO/TC 45/SC 4 |
| ISO 9924-1:2000 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 9924-2:2000 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 2: Acrylonitrile-butadiene and halobutyl rubbers | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 9924-2:2000/Amd 1:2012 | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 9924-3:2009 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 10066:1991 Flexible cellular polymeric materials -- Determination of creep in compression | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 10282:2002 Single-use sterile rubber surgical gloves -- Specification | 90.92 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO 10282:2002/Cor 1:2005 | 60.60 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO 10398:1998 Rubber -- Identification of accelerators in cured and uncured compounds | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 10619-1:2011 Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperature | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 10619-2:2011 Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 2: Bending tests at sub-ambient temperatures | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 10619-3:2011 Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 10638:2010 Rubber -- Identification of antidegradants by gas chromatography/mass spectrometry | 60.60 | 83.040.20 83.040.10 | ISO/TC 45/SC 2 |
| ISO 10960:1994 Rubber and plastics hoses -- Assessment of ozone resistance under dynamic conditions | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 11089:2010 Rubber, raw synthetic -- Determination of antidegradants by high-performance liquid chromatography | 60.60 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 11193-1:2008 Single-use medical examination gloves -- Part 1: Specification for gloves made from rubber latex or rubber solution | 90.92 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO 11193-1:2008/Amd 1:2012 | 60.60 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO 11193-2:2006 Single-use medical examination gloves -- Part 2: Specification for gloves made from poly(vinyl chloride) | 90.93 | 11.140 83.140.99 | ISO/TC 45/SC 4 |
| ISO 11234:1995 Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of dust content | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 11235:1999 Rubber compounding ingredients -- Sulfenamide accelerators -- Test methods | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 11236:2000 Rubber compounding ingredients -- p-Phenylenediamine (PPD) antidegradants -- Test methods | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 11236:2000/Cor 1:2006 | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 11237:2010 Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification | 60.60 | 83.140.40 23.100.40 | ISO/TC 45/SC 1 |
| ISO/TR 11340:1994 Rubber and rubber products -- Hydraulic hose assemblies -- External leakage classification for hydraulic systems | 90.93 | 23.100.40 83.140.40 | ISO/TC 45/SC 1 |
| ISO 11344:2004 Rubber, raw synthetic -- Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography | 90.92 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 11344:2004/Cor 1:2008 | 60.60 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 11345:2006 Rubber -- Assessment of carbon black and carbon black/silica dispersion -- Rapid comparative methods | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 11346:2004 Rubber, vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 11424:1996 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines -- Specification | 90.93 | 27.020 83.140.30 83.140.40 | ISO/TC 45/SC 1 |
| ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems -- Specification | 90.92 | 83.140.40 43.040.50 | ISO/TC 45/SC 1 |
| ISO 11752:2000 Flexible cellular polymeric materials -- Moulded and extruded sponge or expanded cellular rubber products -- Compressibility test on finished parts | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 11752:2000/Amd 1:2006 | 60.60 | 83.100 | ISO/TC 45/SC 4 |
| ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification | 90.20 | 75.200 83.140.40 | ISO/TC 45/SC 1 |
| ISO 11852:2011 Rubber -- Determination of magnesium content of field and concentrated natural rubber latex by titration | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/TR 12134:2010 Rubber -- Estimation of uncertainty for test methods -- Non-functional parameters | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 12243:2003 Medical gloves made from natural rubber latex -- Determination of water-extractable protein using the modified Lowry method | 90.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 12243:2003/Amd 1:2012 | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 12492:2012 Rubber, raw -- Determination of water content by Karl Fischer method | 60.60 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 12493:2011 Rubber, vulcanized -- Determination of stress in tension upon heating | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 12965:2000 Butadiene rubber -- Determination of microstructure by infra-red spectrometry | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 12965:2000/Cor 1:2006 | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 13145:2012 Rubber -- Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 13226:2011 Rubber -- Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 13362:2000 Flexible cellular polymeric materials -- Determination of compression set under humid conditions | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 13363:2004 Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification | 90.92 | 83.140.40 47.080 | ISO/TC 45/SC 1 |
| ISO 13363:2004/Cor 1:2008 | 60.60 | 83.140.40 47.080 | ISO/TC 45/SC 1 |
| ISO 13507:2012 Rubber compounds, raw rubbers and compounding materials -- Short terms for properties reported in certificates of analysis | 60.60 | 83.060 | ISO/TC 45 |
| ISO 13773:1997 Rubber -- Polychloroprene latex -- Determination of alkalinity | 90.93 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 13774:1998 Rubber and plastics hoses for fuels for internal-combustion engines -- Method of test for flammability | 90.20 | 27.020 13.220.40 83.140.40 | ISO/TC 45/SC 1 |
| ISO 13775-1:2000 Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications | 90.20 | 83.140.30 83.140.40 43.040.01 | ISO/TC 45/SC 1 |
| ISO 13775-2:2000 Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications | 90.92 | 43.060.40 83.140.30 83.140.40 | ISO/TC 45/SC 1 |
| ISO 14309:2011 Rubber, vulcanized or thermoplastic -- Determination of volume and/or surface resistivity | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 14557:2002 Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies | 90.92 | 13.220.10 83.140.40 | ISO/TC 45/SC 1 |
| ISO 14557:2002/Amd 1:2007 | 60.60 | 83.140.40 13.220.10 | ISO/TC 45/SC 1 |
| ISO 14558:2000 Rubber -- Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 14932:2012 Rubber compounding ingredients -- Organic vulcanizing agents -- Determination of organic peroxide content | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 15113:2005 Rubber -- Determination of frictional properties | 90.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO 15671:2000 Rubber and rubber additives -- Determination of total sulfur content using an automatic analyser | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 15672:2000 Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 15825:2004 Rubber compounding ingredients -- Carbon black -- Determination of aggregate size distribution by disc centrifuge photosedimentometry | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 15825:2004/Cor 1:2006 | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 16010:2005 Elastomeric seals -- Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids | 90.20 | 83.140.50 | ISO/TC 45/SC 4 |
| ISO/TR 16098:2012 Reclaimed rubbers and reclaimed crumb rubbers -- Evaluation of dispersion in rubber mixes | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO/TS 16176:2011 Rubber compounding ingredients -- Carbon black -- Determination of the aggregate-size distribution at ultimate dispersion | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO/TR 16314:2010 Rubber -- Measurement of the aromaticity of oil in reclaimed rubbers | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 16564:2004 Rubber, raw natural -- Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 16564:2004/Amd 1:2006 | 60.60 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 16565:2013 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 17052:2007 Rubber, raw -- Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography -- Thermal desorption (dynamic headspace) method | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 17564:2008 Raw hydrogenated nitrile rubber (HNBR) -- Determination of residual unsaturation by iodine value | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies -- Guide for use by purchasers, assemblers, installers and operating personnel | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 18064:2003 Thermoplastic elastomers -- Nomenclature and abbreviated terms | 90.20 | 83.080.20 01.040.83 | ISO/TC 45 |
| ISO 18517:2005 Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide | 90.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO 18752:2012 Rubber hoses and hose assemblies -- Wire- or textile-reinforced single-pressure types for hydraulic applications -- Specification | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 18852:2012 Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 18898:2012 Rubber -- Calibration and verification of hardness testers | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 18899:2004 Rubber -- Guide to the calibration of test equipment | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 19003:2006 Rubber and rubber products -- Guidance on the application of statistics to physical testing | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 19004:2004 Rubber and rubber products -- Determination of the sensitivity of test methods | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 1: Diesel fuels | 90.20 | 27.020 83.140.40 | ISO/TC 45/SC 1 |
| ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 2: Gasoline fuels | 90.20 | 83.140.40 27.020 | ISO/TC 45/SC 1 |
| ISO 20299-1:2006 Film for wrapping rubber bales -- Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) | 90.93 | 83.040.01 | ISO/TC 45/SC 3 |
| ISO 20299-1:2006/Cor 1:2008 | 60.60 | 83.040.01 | ISO/TC 45/SC 3 |
| ISO 20299-2:2006 Film for wrapping rubber bales -- Part 2: Natural rubber | 90.93 | 83.040.01 | ISO/TC 45/SC 3 |
| ISO 20299-3:2008 Film for wrapping rubber bales -- Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM) | 90.93 | 83.040.01 | ISO/TC 45/SC 3 |
| ISO 21171:2006 Medical gloves -- Determination of removable surface powder | 90.93 | 11.140 | ISO/TC 45/SC 3 |
| ISO 21461:2012 Rubber -- Determination of the aromaticity of oil in vulcanized rubber compounds | 60.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO 21561:2005 Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR | 90.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO 21561:2005/Amd 1:2010 | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 21869:2006 Rubber compounding ingredients -- Magnesium oxide -- Methods of test | 90.93 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 21870:2005 Rubber compounding ingredients -- Carbon black -- Determination of high-temperature loss on heating by thermogravimetry | 90.20 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 22762-1:2010 Elastomeric seismic-protection isolators -- Part 1: Test methods | 60.60 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 22762-2:2010 Elastomeric seismic-protection isolators -- Part 2: Applications for bridges -- Specifications | 60.60 | 93.040 83.140.99 | ISO/TC 45/SC 4 |
| ISO 22762-3:2010 Elastomeric seismic-protection isolators -- Part 3: Applications for buildings -- Specifications | 60.60 | 91.120.25 83.140.99 | ISO/TC 45/SC 4 |
| ISO 22768:2006 Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC) | 90.93 | 83.040.10 83.060 | ISO/TC 45/SC 2 |
| ISO 23233:2009 Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion using a driven, vertical abrasive disc | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 23297:2008 Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications -- Specification | 90.93 | 83.140.40 23.100.40 | ISO/TC 45/SC 1 |
| ISO 23337:2007 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using the Improved Lambourn test machine | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 23529:2010 Rubber -- General procedures for preparing and conditioning test pieces for physical test methods | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 23711:2003 Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers | 90.20 | 91.140.60 91.140.80 83.140.50 | ISO/TC 45/SC 4 |
| ISO 23794:2010 Rubber, vulcanized or thermoplastic -- Abrasion testing -- Guidance | 90.92 | 83.060 | ISO/TC 45/SC 2 |
| ISO 24453:2008 Rubber -- Acquisition and presentation of comparable single-point data | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 24454:2008 Rubber -- Acquisition and presentation of comparable multi-point data | 90.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 24698-1:2008 Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 1: Combustion (Dumas) method | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO 24698-2:2008 Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 2: Kjeldahl method | 90.93 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO/TR 24699:2009 Rubber and rubber products -- Environmental aspects -- General guidelines for their inclusion in standards | 60.60 | 83.140.01 | ISO/TC 45 |
| ISO 24999:2008 Flexible cellular polymeric materials -- Determination of fatigue by a constant-strain procedure | 90.93 | 83.100 | ISO/TC 45/SC 4 |
| ISO 25518:2009 Single-use rubber gloves for general applications -- Specification | 60.60 | 83.140.99 | ISO/TC 45/SC 4 |
| ISO 27588:2012 Rubber, vulcanized or thermoplastic -- Determination of dead-load hardness using the very low rubber hardness (VLRH) scale | 60.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO 27727:2008 Rubber, vulcanized -- Measurement of fatigue crack growth rate | 90.93 | 83.060 | ISO/TC 45/SC 2 |
| ISO 28017:2011 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications -- Specification | 60.60 | 83.140.40 | ISO/TC 45/SC 1 |
| ISO 28343:2010 Rubber compounding ingredients -- Process oils -- Determination of glass transition temperature by DSC | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 28641:2010 Rubber compounding ingredients -- Organic chemicals -- General test methods | 60.60 | 83.040.20 | ISO/TC 45/SC 3 |
| ISO 28702:2008 Rubber and plastics hoses and tubing -- Textile-reinforced types -- Sub-ambient temperature crush test | 90.93 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 30013:2011 Rubber and plastics hoses -- Methods of exposure to laboratory light sources -- Determination of changes in colour, appearance and other physical properties | 60.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO 32100:2010 Rubber- or plastics-coated fabrics -- Physical and mechanical tests -- Determination of flex resistance by the flexometer method | 60.60 | 59.080.40 | ISO/TC 45/SC 4 |
