Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO/DIS 124 Latex, rubber -- Determination of total solids content | 40.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/DIS 249 Rubber, raw natural -- Determination of dirt content | 40.20 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO/DIS 289-1 Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity | 40.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO/DIS 815-1 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures | 40.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO/DIS 815-2 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures | 40.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO/DIS 976 Rubber and plastics -- Polymer dispersions and rubber latices -- Determination of pH | 40.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/CD 1434 Natural rubber in bales -- Amount of bale coating -- Determination | 30.99 | 83.060 | ISO/TC 45/SC 3 |
| ISO/PRF 1629 Rubber and latices -- Nomenclature | 50.20 | 83.060 83.040.10 01.040.83 | ISO/TC 45 |
| ISO/DIS 1656 Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content | 40.20 | 83.040.10 | ISO/TC 45/SC 2 |
| ISO/NP 1817 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids | 10.99 | 83.060 | ISO/TC 45/SC 2 |
| ISO/DIS 1823 Rubber hose assemblies for oil suction and discharge service -- Specification | 40.20 | 75.200 83.140.40 | ISO/TC 45/SC 1 |
| ISO/DIS 2000 Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR) | 40.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/CD 2005 Rubber latex, natural, concentrate -- Determination of sludge content | 30.99 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/DIS 2322 Styrene-butadiene rubber (SBR) -- Emulsion- and solution-polymerized types -- Evaluation procedures | 40.20 | 83.060 | ISO/TC 45/SC 3 |
| ISO/DIS 2393 Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures | 40.20 | 83.060 | ISO/TC 45/SC 3 |
| ISO 2440:1997/NP Amd 2 | 10.99 | 83.100 | ISO/TC 45/SC 4 |
| ISO/DIS 2476 Butadiene rubber (BR) -- Solution-polymerized types -- Evaluation procedures | 40.20 | 83.060 | ISO/TC 45/SC 3 |
| ISO/DIS 2929 Rubber hoses and hose assemblies for bulk fuel delivery by truck -- Specification | 40.99 | 75.200 83.140.40 | ISO/TC 45/SC 1 |
| ISO/DIS 3302-1 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances | 40.20 | 83.140.01 | ISO/TC 45/SC 4 |
| ISO/DIS 3385.2 Flexible cellular polymeric materials -- Determination of fatigue by constant-load pounding | 40.20 | 83.100 | ISO/TC 45/SC 4 |
| ISO/DIS 3994 Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification | 40.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO/CD 4097 Rubber, ethylene-propylene-diene (EPDM) -- Evaluation procedure | 30.20 | 83.060 | ISO/TC 45/SC 3 |
| ISO/CD 5772 Rubber hoses and hose assemblies for measured fuel dispensing -- Specification | 30.99 | 75.200 83.140.40 | ISO/TC 45/SC 1 |
| ISO/PRF 5892 Rubber building gaskets -- Materials for preformed solid vulcanized structural gaskets -- Specification | 50.20 | 83.140.50 91.100.50 | ISO/TC 45/SC 4 |
| ISO/FDIS 5999 Flexible cellular polymeric materials -- Polyurethane foam for load-bearing applications excluding carpet underlay -- Specification | 50.20 | 83.100 | ISO/TC 45/SC 4 |
| ISO/DIS 6101-3 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content | 40.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO/DIS 6101-4 Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content | 40.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO/DIS 6806 Rubber hoses and hose assemblies for use in oil burners -- Specification | 40.99 | 83.140.40 27.060.10 | ISO/TC 45/SC 1 |
| ISO/DIS 6808 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids -- Specification | 40.60 | 83.140.40 75.200 | ISO/TC 45/SC 1 |
| ISO/DIS 6914 Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension | 40.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO/DIS 8029 Plastics hose -- General-purpose collapsible water hose, textile-reinforced -- Specification | 40.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO/DIS 8030 Rubber and plastics hoses -- Method of test for flammability | 40.20 | 23.040.70 13.220.40 | ISO/TC 45/SC 1 |
| ISO/DIS 8330 Rubber and plastics hoses and hose assemblies -- Vocabulary | 40.60 | 23.040.70 01.040.23 | ISO/TC 45/SC 1 |
| ISO/DIS 8331 Rubber and plastics hoses and hose assemblies -- Guidelines for selection, storage, use and maintenance | 40.60 | 23.040.70 | ISO/TC 45/SC 1 |
| ISO/DIS 10282 Single-use sterile rubber surgical gloves -- Specification | 40.99 | 83.140.99 11.140 | ISO/TC 45/SC 4 |
| ISO/DIS 11346 Rubber, vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use | 40.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO/DIS 11619 Polyurethane tubing for use primarily in pneumatic installations -- Dimensions and specification | 40.60 | 23.040.20 | ISO/TC 45/SC 1 |
| ISO/NP 13363 Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification | 10.99 | 83.140.40 47.080 | ISO/TC 45/SC 1 |
| ISO/DIS 14285.2 Rubber and plastics gloves for food services -- Limits for extractable substances | 40.60 | 67.250 83.140.99 | ISO/TC 45/SC 4 |
| ISO/DTS 16095 Reclaimed rubber derived from products containing mainly natural rubber -- Evaluation procedure | 30.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/DTS 16096 Reclaimed isobutene-isoprene (IIR) rubber -- Evaluation procedure | 30.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/DTS 16097 Vulcanized crumb rubber -- Evaluation procedures | 30.60 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/DIS 16301 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools -- Specification | 40.60 | 83.140.40 23.040.70 | ISO/TC 45/SC 1 |
| ISO/DIS 17257 Rubber -- Identification of polymers -- Pyrolytic gas-chromatographic method using mass-spectrometric detection | 40.60 | 83.060 | ISO/TC 45/SC 2 |
| ISO/FDIS 17278 Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR) | 50.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/CD 17324 Rubber hoses for automotive turbochargers -- Specification | 30.60 | 43.040.01 83.140.40 | ISO/TC 45/SC 1 |
| ISO/DIS 17403 Rubber -- Determination of magnesium content of field and concentrated natural rubber latex by titration (cyanide-free method) | 40.20 | 83.040.10 | ISO/TC 45/SC 3 |
| ISO/NP 17717 Meteorological balloon -- Specification | 10.99 | ISO/TC 45/SC 4 | |
| ISO/PRF TS 17796 Rubber -- Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylene oxide) type sorbent using thermodesorption and gas chromatographic method with mass spectrometric detection | 50.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO/NP 18766 Rubber, vulcanized or thermoplastic -- Low temperature testing -- General introduction and guide | 10.99 | ISO/TC 45/SC 2 | |
| ISO/FDIS 18899 Rubber -- Guide to the calibration of test equipment | 50.20 | 83.060 | ISO/TC 45/SC 2 |
| ISO/AWI TS 22762-4 Elastomeric seismic-protection isolators -- Part 4: Guidance on the application of ISO 22762-3 | 20.00 | 83.140.99 91.120.25 | ISO/TC 45/SC 4 |
| ISO/DIS 27126 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals -- Specification | 40.60 | 83.140.40 | ISO/TC 45/SC 1 |
| ISO/DIS 27127 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas -- Specification | 40.60 | 75.200 83.140.40 | ISO/TC 45/SC 1 |
