Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 276:2002 Binders for paints and varnishes -- Linseed stand oil -- Requirements and methods of test | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 277:2002 Binders for paints and varnishes -- Raw tung oil -- Requirements and methods of test | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 1513:2010 Paints and varnishes -- Examination and preparation of test samples | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 1514:2004 Paints and varnishes -- Standard panels for testing | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 1518-1:2011 Paints and varnishes -- Determination of scratch resistance -- Part 1: Constant-loading method | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 1518-2:2011 Paints and varnishes -- Determination of scratch resistance -- Part 2: Variable-loading method | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 1519:2011 Paints and varnishes -- Bend test (cylindrical mandrel) | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 1520:2006 Paints and varnishes -- Cupping test | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 1522:2006 Paints and varnishes -- Pendulum damping test | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 1524:2013 Paints, varnishes and printing inks -- Determination of fineness of grind | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2409:2013 Paints and varnishes -- Cross-cut test | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2431:2011 Paints and varnishes -- Determination of flow time by use of flow cups | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2808:2007 Paints and varnishes -- Determination of film thickness | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2810:2004 Paints and varnishes -- Natural weathering of coatings -- Exposure and assessment | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2811-1:2011 Paints and varnishes -- Determination of density -- Part 1: Pyknometer method | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2811-2:2011 Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2811-3:2011 Paints and varnishes -- Determination of density -- Part 3: Oscillation method | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2811-4:2011 Paints and varnishes -- Determination of density -- Part 4: Pressure cup method | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2812-1:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 1: Immersion in liquids other than water | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2812-2:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2812-3:2012 Paints and varnishes -- Determination of resistance to liquids -- Part 3: Method using an absorbent medium | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2812-4:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 4: Spotting methods | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2812-5:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 5: Temperature-gradient oven method | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2813:1994 Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2813:1994/Cor 1:1997 | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2814:1973 Paints and varnishes -- Comparison of contrast ratio (hiding power) of paints of the same type and colour | 90.99 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2815:2003 Paints and varnishes -- Buchholz indentation test | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2884-1:1999 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 2884-2:2003 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 2: Disc or ball viscometer operated at a specified speed | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 3231:1993 Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 3233-1:2013 Paints and varnishes -- Determination of the percentage volume of non-volatile matter -- Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 3248:1998 Paints and varnishes -- Determination of the effect of heat | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 3251:2008 Paints, varnishes and plastics -- Determination of non-volatile-matter content | 90.93 | 83.080.01 87.040 87.060.20 | ISO/TC 35/SC 10 |
| ISO 3270:1984 Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing | 90.60 | 87.060.01 87.040 | ISO/TC 35/SC 9 |
| ISO 3668:1998 Paints and varnishes -- Visual comparison of the colour of paints | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 3681:1996 Binders for paints and varnishes -- Determination of saponification value -- Titrimetric method | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 4618:2006 Paints and varnishes -- Terms and definitions | 90.92 | 87.040 01.040.87 | ISO/TC 35 |
| ISO 4619:1998 Driers for paints and varnishes | 90.60 | 87.060.99 | ISO/TC 35 |
| ISO 4623-1:2000 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 1: Steel substrates | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4623-2:2003 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 2: Aluminium substrates | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4623-2:2003/Cor 1:2005 | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4624:2002 Paints and varnishes -- Pull-off test for adhesion | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4625-1:2004 Binders for paints and varnishes -- Determination of softening point -- Part 1: Ring-and-ball method | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 4625-2:2004 Binders for paints and varnishes -- Determination of softening point -- Part 2: Cup-and-ball method | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 4626:1980 Volatile organic liquids -- Determination of boiling range of organic solvents used as raw materials | 90.93 | 87.060.30 | ISO/TC 35 |
| ISO 4628-1:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 1: General introduction and designation system | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4628-2:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 2: Assessment of degree of blistering | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4628-3:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 3: Assessment of degree of rusting | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4628-4:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4628-5:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 5: Assessment of degree of flaking | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4628-6:2011 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 6: Assessment of degree of chalking by tape method | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4628-7:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 7: Assessment of degree of chalking by velvet method | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4628-8:2012 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4628-10:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 10: Assessment of degree of filiform corrosion | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 4629:1996 Binders for paints and varnishes -- Determination of hydroxyl value -- Titrimetric method | 90.60 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 4630-1:2004 Clear liquids -- Estimation of colour by the Gardner colour scale -- Part 1: Visual method | 90.92 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 4630-2:2004 Clear liquids -- Estimation of colour by the Gardner colour scale -- Part 2: Spectrophotometric method | 90.92 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 6270-1:1998 Paints and varnishes -- Determination of resistance to humidity -- Part 1: Continuous condensation | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 6270-2:2005 Paints and varnishes -- Determination of resistance to humidity -- Part 2: Procedure for exposing test specimens in condensation-water atmospheres | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 6271-1:2004 Clear liquids -- Estimation of colour by the platinum-cobalt scale -- Part 1: Visual method | 90.92 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 6271-2:2004 Clear liquids -- Estimation of colour by the platinum-cobalt scale -- Part 2: Spectrophotometric method | 90.92 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 6272-1:2011 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 6272-2:2011 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 6504-1:1983 Paints and varnishes -- Determination of hiding power -- Part 1: Kubelka-Munk method for white and light-coloured paints | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 6504-3:2006 Paints and varnishes -- Determination of hiding power -- Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 6744-1:1999 Binders for paints and varnishes -- Alkyd resins -- Part 1: General methods of test | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 6744-2:1999 Binders for paints and varnishes -- Alkyd resins -- Part 2: Determination of phthalic anhydride content | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 6744-3:1999 Binders for paints and varnishes -- Alkyd resins -- Part 3: Determination of unsaponifiable matter content | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 6744-4:1999 Binders for paints and varnishes -- Alkyd resins -- Part 4: Determination of fatty acid content | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 6860:2006 Paints and varnishes -- Bend test (conical mandrel) | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 7142:2007 Binders for paints and varnishes -- Epoxy resins -- General methods of test | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 7143:2007 Binders for paints and varnishes -- Methods of test for characterizing water-based binders | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 7724-1:1984 Paints and varnishes -- Colorimetry -- Part 1: Principles | 90.99 | 87.040 | ISO/TC 35/SC 9 |
| ISO 7724-2:1984 Paints and varnishes -- Colorimetry -- Part 2: Colour measurement | 90.99 | 87.040 | ISO/TC 35/SC 9 |
| ISO 7724-3:1984 Paints and varnishes -- Colorimetry -- Part 3: Calculation of colour differences | 90.99 | 87.040 | ISO/TC 35/SC 9 |
| ISO 7783:2011 Paints and varnishes -- Determination of water-vapour transmission properties -- Cup method | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 7784-1:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Rotating abrasive-paper-covered wheel method | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 7784-2:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Rotating abrasive rubber wheel method | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 7784-3:2000 Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Reciprocating test panel method | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-1:1992 Coating powders -- Part 1: Determination of particle size distribution by sieving | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-2:1992 Coating powders -- Part 2: Determination of density by gas comparison pyknometer (referee method) | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-3:1992 Coating powders -- Part 3: Determination of density by liquid displacement pyknometer | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-4:1992 Coating powders -- Part 4: Calculation of lower explosion limit | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-4:1992/Cor 1:1993 | 90.99 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-5:1992 Coating powders -- Part 5: Determination of flow properties of a powder/air mixture | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-6:1992 Coating powders -- Part 6: Determination of gel time of thermosetting coating powders at a given temperature | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-6:1992/Amd 1:1998 | 90.99 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-7:1992 Coating powders -- Part 7: Determination of loss of mass on stoving | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-8:1994 Coating powders -- Part 8: Assessment of the storage stability of thermosetting powders | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-9:1992 Coating powders -- Part 9: Sampling | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-10:1998 Coating powders -- Part 10: Determination of deposition efficiency | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-11:1997 Coating powders -- Part 11: Inclined-plane flow test | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-12:1998 Coating powders -- Part 12: Determination of compatibility | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-13:2001 Coating powders -- Part 13: Particle size analysis by laser diffraction | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8130-14:2004 Coating powders -- Part 14: Terminology | 95.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds, edges and other areas with surface imperfections | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8501-4:2006 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces | 90.92 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8502-3:1992 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) | 90.92 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8502-4:1993 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 4: Guidance on the estimation of the probability of condensation prior to paint application | 90.92 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8502-5:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 11: Field method for the turbidimetric determination of water-soluble sulfate | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8502-12:2003 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 12: Field method for the titrimetric determination of water-soluble ferrous ions | 90.92 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Focusing microscope procedure | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Stylus instrument procedure | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8503-5:2003 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 5: Replica tape method for the determination of the surface profile | 90.92 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 3: Hand- and power-tool cleaning | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 8623:1997 Tall-oil fatty acids for paints and varnishes -- Specifications and test methods | 90.92 | 87.060.99 | ISO/TC 35 |
| ISO 9038:2002 Test for sustained combustibility of liquids | 90.92 | 87.040 13.220.40 | ISO/TC 35/SC 9 |
| ISO 9117-1:2009 Paints and varnishes -- Drying tests -- Part 1: Determination of through-dry state and through-dry time | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 9117-2:2010 Paints and varnishes -- Drying tests -- Part 2: Pressure test for stackability | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 9117-3:2010 Paints and varnishes -- Drying tests -- Part 3: Surface-drying test using ballotini | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 9117-4:2012 Paints and varnishes -- Drying tests -- Part 4: Test using a mechanical recorder | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 9117-5:2012 Paints and varnishes -- Drying tests -- Part 5: Modified Bandow-Wolff test | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 9117-6:2012 Paints and varnishes -- Drying tests -- Part 6: Print-free test | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 9514:2005 Paints and varnishes -- Determination of the pot life of multicomponent coating systems -- Preparation and conditioning of samples and guidelines for testing | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 10283:2007 Binders for paints and varnishes -- Determination of monomeric diisocyanates in isocyanate resins | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 10890:2010 Paints and varnishes -- Modelling of biocide release rate from antifouling paints by mass-balance calculation | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11124-4:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11125-2:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11125-3:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11125-4:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11125-5:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11125-6:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-1:1993/Cor 1:1997 | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-1:1993/Cor 2:1997 | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-5:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-6:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-7:1995 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-7:1995/Cor 1:1999 | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-8:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand | 90.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite | 90.93 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet | 90.92 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11127-4:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide test | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides | 60.60 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 11341:2004 Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 11503:1995 Paints and varnishes -- Determination of resistance to humidity (intermittent condensation) | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 11507:2007 Paints and varnishes -- Exposure of coatings to artificial weathering -- Exposure to fluorescent UV lamps and water | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 11668:1997 Binders for paints and varnishes -- Chlorinated polymerization resins -- General methods of test | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 11890-1:2007 Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method | 90.93 | 87.040 | ISO/TC 35 |
| ISO 11890-2:2013 Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gas-chromatographic method | 60.60 | 87.040 | ISO/TC 35 |
| ISO 11908:1996 Binders for paints and varnishes -- Amino resins -- General methods of test | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 11909:2007 Binders for paints and varnishes -- Polyisocyanate resins -- General methods of test | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 11997-1:2005 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 11997-2:2000 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 2: Wet (salt fog)/dry/humidity/UV light | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 11998:2006 Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 12013-1:2012 Paints and varnishes -- Determination of curing characteristics using a free damped oscillation method -- Part 1: Start temperature of the curing reaction | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 12013-2:2012 Paints and varnishes -- Determination of curing characteristics using a free damped oscillation method -- Part 2: Glass transition temperature | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 12137:2011 Paints and varnishes -- Determination of mar resistance | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 12944-1:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction | 90.60 | 87.020 | ISO/TC 35/SC 14 |
| ISO 12944-2:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments | 90.60 | 87.020 | ISO/TC 35/SC 14 |
| ISO 12944-3:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 3: Design considerations | 90.60 | 87.020 | ISO/TC 35/SC 14 |
| ISO 12944-4:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation | 90.60 | 25.220.10 | ISO/TC 35/SC 14 |
| ISO 12944-5:2007 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems | 90.92 | 87.020 | ISO/TC 35/SC 14 |
| ISO 12944-6:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 6: Laboratory performance test methods | 90.92 | 87.020 | ISO/TC 35/SC 14 |
| ISO 12944-7:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 7: Execution and supervision of paint work | 90.60 | 87.020 | ISO/TC 35/SC 14 |
| ISO 12944-8:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 8: Development of specifications for new work and maintenance | 90.60 | 87.020 | ISO/TC 35/SC 14 |
| ISO 13076:2012 Paints and varnishes -- Lighting and procedure for visual assessments of coatings | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 13129:2012 Paints and varnishes -- Electrochemical measurement of the protection provided to steel by paint coatings -- Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 13632:2012 Binders for paints and varnishes -- Rosin -- Sampling and sample preparation for colour measurement | 60.60 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 13803:2000 Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 13885-1:2008 Binders for paints and varnishes -- Gel permeation chromatography (GPC) -- Part 1: Tetrahydrofuran (THF) as eluent | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 14446:1999 Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions | 90.93 | 83.080.20 87.060.20 | ISO/TC 35/SC 10 |
| ISO 14680-1:2000 Paints and varnishes -- Determination of pigment content -- Part 1: Centrifuge method | 90.93 | 87.060.10 | ISO/TC 35/SC 9 |
| ISO 14680-2:2000 Paints and varnishes -- Determination of pigment content -- Part 2: Ashing method | 90.93 | 87.060.10 | ISO/TC 35/SC 9 |
| ISO 14680-3:2000 Paints and varnishes -- Determination of pigment content -- Part 3: Filtration method | 90.93 | 87.060.10 | ISO/TC 35/SC 9 |
| ISO 15091:2012 Paints and varnishes -- Determination of electrical conductivity and resistance | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15110:2013 Paints and varnishes -- Artificial weathering including acidic deposition | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15181-1:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15181-2:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15181-3:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15181-4:2008 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15181-5:2008 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15181-6:2012 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15184:2012 Paints and varnishes -- Determination of film hardness by pencil test | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15234:1999 Paints and varnishes -- Testing of formaldehyde-emitting coatings and melamine foams -- Determination of the steady-state concentration of formaldehyde in a small test chamber | 90.93 | 87.040 | ISO/TC 35/SC 10 |
| ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination | 90.92 | 25.220.10 | ISO/TC 35/SC 12 |
| ISO 15528:2000 Paints, varnishes and raw materials for paints and varnishes -- Sampling | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15710:2002 Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15711:2003 Paints and varnishes -- Determination of resistance to cathodic disbonding of coatings exposed to sea water | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 15715:2003 Binders for paints and varnishes -- Determination of turbidity | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 15741:2001 Paints and varnishes -- Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases | 90.92 | 87.020 | ISO/TC 35/SC 14 |
| ISO 15880:2000 Paints, varnishes and binders -- Determination of MEQ value of water-based coating materials and binders | 90.93 | 87.060.20 | ISO/TC 35/SC 10 |
| ISO 16053:2010 Paints and varnishes -- Coating materials and coating systems for exterior wood -- Natural weathering test | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 16276-1:2007 Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 1: Pull-off testing | 90.93 | 87.020 | ISO/TC 35/SC 14 |
| ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 2: Cross-cut testing and X-cut testing | 90.93 | 87.020 | ISO/TC 35/SC 14 |
| ISO 16482-1:2013 Binders for paints and varnishes -- Determination of the non-volatile-matter content of aqueous rosin-resin dispersions -- Part 1: Oven method | 60.60 | 87.040 87.060.20 | ISO/TC 35/SC 10 |
| ISO 16482-2:2013 Binders for paints and varnishes -- Determination of the non-volatile-matter content of aqueous rosin-resin dispersions -- Part 2: Microwave method | 60.60 | 87.040 87.060.20 | ISO/TC 35/SC 10 |
| ISO 16773-1:2007 Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 1: Terms and definitions | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 16773-2:2007 Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 2: Collection of data | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 16773-3:2009 Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 3: Processing and analysis of data from dummy cells | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 16773-4:2009 Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 4: Examples of spectra of polymer-coated specimens | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 16805:2003 Binders for paints and varnishes -- Determination of glass transition temperature | 90.93 | 87.040 87.060.20 | ISO/TC 35/SC 10 |
| ISO 16862:2003 Paints and varnishes -- Evaluation of sag resistance | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 17132:2007 Paints and varnishes -- T-bend test | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 17872:2007 Paints and varnishes -- Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 17895:2005 Paints and varnishes -- Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) | 90.93 | 87.040 | ISO/TC 35 |
| ISO 19334:2010 Binders for paints and varnishes -- Gum rosin -- Gas-chromatographic analysis | 60.60 | 87.060.20 87.040 | ISO/TC 35/SC 10 |
| ISO 19840:2012 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces | 60.60 | 87.020 | ISO/TC 35/SC 14 |
| ISO 20340:2009 Paints and varnishes -- Performance requirements for protective paint systems for offshore and related structures | 90.93 | 87.040 | ISO/TC 35/SC 14 |
| ISO 20566:2013 Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory-scale car-wash | 60.60 | 43.020 87.040 | ISO/TC 35/SC 9 |
| ISO 20567-1:2005 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 1: Multi-impact testing | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 20567-2:2005 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 2: Single-impact test with a guided impact body | 90.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 20567-3:2012 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 3: Single-impact test with a free-flying impact body | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 21227-1:2003 Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 1: General guidance | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 21227-2:2006 Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 2: Evaluation procedure for multi-impact stone-chipping test | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 21227-3:2007 Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 3: Evaluation of delamination and corrosion around a scribe | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 21227-4:2008 Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 4: Evaluation of filiform corrosion | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 23811:2009 Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate | 90.92 | 87.040 | ISO/TC 35/SC 9 |
| ISO 28199-1:2009 Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 1: Relevant vocabulary and preparation of test panels | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 28199-1:2009/Cor 1:2009 | 60.60 | 87.040 | ISO/TC 35/SC 9 |
| ISO 28199-2:2009 Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 28199-3:2009 Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power | 90.93 | 87.040 | ISO/TC 35/SC 9 |
| ISO 29601:2011 Paints and varnishes -- Corrosion protection by protective paint systems -- Assessment of porosity in a dry film | 60.60 | 87.020 | ISO/TC 35/SC 14 |
