Home

Standards catalogue

Subscribe to updates

ISO/TC 35  - Paints and varnishes

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 35 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO/CD 1514
Paints and varnishes -- Standard panels for testing
30.20 87.040ISO/TC 35/SC 9
ISO/FDIS 2813
Paints and varnishes -- Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
50.00 87.040ISO/TC 35/SC 9
ISO 3233-2
Paints and varnishes -- Determination of the percentage volume of non-volatile matter -- Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
60.00 87.040ISO/TC 35/SC 9
ISO/DIS 3233-3
Paints and varnishes -- Determination of the percentage volume of non-volatile matter -- Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
40.60 87.040ISO/TC 35/SC 9
ISO/DIS 3248
Paints and varnishes -- Determination of the effect of heat
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 3668
Paints and varnishes -- Visual comparison of the colour of paints
40.00 87.040ISO/TC 35/SC 9
ISO/FDIS 4618
Paints and varnishes -- Terms and definitions
50.20 01.040.87
87.040
ISO/TC 35
ISO/NP 4623-2
Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 2: Aluminium substrates
10.99 87.040ISO/TC 35/SC 9
ISO/DIS 4624
Paints and varnishes -- Pull-off test for adhesion
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 4628-1
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 1: General introduction and designation system
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 4628-2
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 2: Assessment of degree of blistering
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 4628-3
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 3: Assessment of degree of rusting
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 4628-4
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 4628-5
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 5: Assessment of degree of flaking
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 4628-7
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 7: Assessment of degree of chalking by velvet method
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 4628-10
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 10: Assessment of degree of filiform corrosion
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 4630
Clear liquids -- Estimation of colour by the Gardner colour scale
40.20 87.060.20ISO/TC 35/SC 10
ISO/NP 6270-1
Paints and varnishes -- Determination of resistance to humidity -- Part 1: Continuous condensation
10.99 87.040ISO/TC 35/SC 9
ISO/NP 6270-2
Paints and varnishes -- Determination of resistance to humidity -- Part 2: Procedure for exposing test specimens in condensation-water atmospheres
10.99 87.040ISO/TC 35/SC 9
ISO/DIS 6271
Clear liquids -- Estimation of colour by the platinum-cobalt colour scale
40.20 87.060.20ISO/TC 35/SC 10
ISO/DIS 7784-1
Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Method with abrasive-paper covered wheels and rotating test panel
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 7784-2
Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Method with abrasive rubber wheels and rotating test panel
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 7784-3
Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test panel
40.00 87.040ISO/TC 35/SC 9
ISO/DIS 8502-2
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces
40.60 25.220.10ISO/TC 35/SC 12
ISO/DIS 8502-3
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
40.20 25.220.10ISO/TC 35/SC 12
ISO/DIS 8502-4
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 4: Guidance on the estimation of the probability of condensation prior to paint application
40.20 25.220.10ISO/TC 35/SC 12
ISO/CD 8502-9
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts
30.60 25.220.10ISO/TC 35/SC 12
ISO/DIS 8502-12
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
40.60 25.220.10ISO/TC 35/SC 12
ISO/WD 8503-5
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 5: Replica tape method for the determination of the surface profile
20.20 25.220.10ISO/TC 35/SC 12
ISO/DIS 8623
Tall-oil fatty acids for paints and varnishes -- Test methods and characteristic values
40.20 87.060.99ISO/TC 35/SC 10
ISO/CD 11126-10
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet
30.99 25.220.10ISO/TC 35/SC 12
ISO/NP 11997-1
Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity
10.99 87.040ISO/TC 35/SC 9
ISO/NP 12944-1
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction
10.99 87.020ISO/TC 35/SC 14
ISO/NP 12944-2
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments
10.99 87.020ISO/TC 35/SC 14
ISO/NP 12944-3
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 3: Design considerations
10.99 87.020ISO/TC 35/SC 14
ISO/NP 12944-4
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation
10.99 25.220.10ISO/TC 35/SC 14
ISO/NP 12944-7
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 7: Execution and supervision of paint work
10.99 87.020ISO/TC 35/SC 14
ISO/NP 12944-8
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 8: Development of specifications for new work and maintenance
10.99 87.020ISO/TC 35/SC 14
ISO/FDIS 13803
Paints and varnishes -- Determination of haze on paint films at 20 degrees
50.00 87.040ISO/TC 35/SC 9
ISO/NP TR 15235
Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination
10.99 25.220.10ISO/TC 35/SC 12
ISO/NP 15741
Paints and varnishes -- Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
10.99 87.020ISO/TC 35/SC 14
ISO/DIS 16773-1
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens -- Part 1: Terms and definitions
40.20 87.040ISO/TC 35/SC 9
ISO/DIS 16773-2
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens -- Part 2: Collection of data
40.20 87.040ISO/TC 35/SC 9
ISO/DIS 16773-3
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens -- Part 3: Processing and analysis of data from dummy cells
40.20 87.040ISO/TC 35/SC 9
ISO/DIS 16773-4
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens -- Part 4: Examples of spectra of polymer-coated specimens
40.20 87.040ISO/TC 35/SC 9
ISO/FDIS 17463
Paints and varnishes -- Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
50.20 87.040ISO/TC 35/SC 9
ISO/NP 18741
Binders for paints and varnishes -- Determination of hydroxyl value -- Method using a catalyst
10.99ISO/TC 35/SC 10
ISO/NP 19396-1
Paints and varnishes -- Determination of pH value -- Part 1: pH electrodes with glass membrane
10.99ISO/TC 35/SC 9
ISO/NP 19396-2
Paints and varnishes -- Determination of pH value -- Part 2: pH electrodes with ISFET technology
10.99ISO/TC 35/SC 9
ISO/NP TS 19397
Determination of the film thickness of coatings using an ultrasonic gage
10.99ISO/TC 35/SC 9
ISO/NP TS 19399
Paints and varnishes -- Wedge-cut method for determination of film thickness (scribe and drill method)
10.99ISO/TC 35/SC 9
ISO/NP TR 19402
Paints and varnishes -- Adhesion of coatings
10.99ISO/TC 35/SC 9
ISO/NP 19403-1
Paints and varnishes -- Wettability -- Part 1: Terminology and general principles
10.99ISO/TC 35/SC 9
ISO/NP 19403-2
Paints and varnishes -- Wettability -- Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
10.99ISO/TC 35/SC 9
ISO/NP 19403-3
Paints and varnishes -- Wettability -- Part 3: Determination of the surface tension of liquids using the pendant drop method
10.99ISO/TC 35/SC 9
ISO/NP 19403-4
Paints and varnishes -- Wettability -- Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
10.99ISO/TC 35/SC 9
ISO/NP 19403-5
Paints and varnishes -- Wettability -- Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
10.99ISO/TC 35/SC 9
ISO/NP 19403-6
Paints and varnishes -- Wettability -- Part 6: Measurement of dynamic contact angle
10.99ISO/TC 35/SC 9
ISO/NP 19403-7
Paints and varnishes -- Wettability -- Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)
10.99ISO/TC 35/SC 9
ISO/NP 20340
Paints and varnishes -- Performance requirements for protective paint systems for offshore and related structures
10.99 87.040ISO/TC 35/SC 14
ISO/NP 20567-1
Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 1: Multi-impact testing
10.99 87.040ISO/TC 35/SC 9
ISO/NP 20567-2
Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 2: Single-impact test with a guided impact body
10.99 87.040ISO/TC 35/SC 9