Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 241:1994 Shanks for turning and planing tools -- Shapes and dimensions of the section | 90.93 | 25.100.25 25.100.10 | ISO/TC 29/SC 9 |
| ISO 242:1975 Carbide tips for brazing on turning tools | 90.20 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 243:1975 Turning tools with carbide tips -- External tools | 90.20 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 504:1975 Turning tools with carbide tips -- Designation and marking | 90.93 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 514:1975 Turning tools with carbide tips -- Internal tools | 90.20 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 883:1985 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions | 90.92 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 1832:2012 Indexable inserts for cutting tools -- Designation | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 3286:1976 Single point cutting tools -- Corner radii | 90.93 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 3364:2011 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 3365:1985 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions | 90.93 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5608:2012 Turning and copying tool holders and cartridges for indexable inserts -- Designation | 60.60 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 5609-1:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 1: Designation, styles, dimensions and calculation for corrections | 60.60 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 5609-2:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 2: Style F | 60.60 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 5609-3:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 3: Style K | 60.60 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 5609-4:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 4: Style L | 60.60 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 5609-5:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 5: Style U | 60.60 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 5609-6:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 6: Style Q | 60.60 | 25.100.10 | ISO/TC 29/SC 9 |
| ISO 5610-1:2010 Tool holders with rectangular shank for indexable inserts -- Part 1: General survey, correlation and determination of dimensions | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-2:2010 Tool holders with rectangular shank for indexable inserts -- Part 2: Style A | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-3:2010 Tool holders with rectangular shank for indexable inserts -- Part 3: Style B | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-4:2010 Tool holders with rectangular shank for indexable inserts -- Part 4: Style D | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-5:2010 Tool holders with rectangular shank for indexable inserts -- Part 5: Style F | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-6:2010 Tool holders with rectangular shank for indexable inserts -- Part 6: Style G | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-7:2010 Tool holders with rectangular shank for indexable inserts -- Part 7: Style J | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-8:2010 Tool holders with rectangular shank for indexable inserts -- Part 8: Style K | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-9:2010 Tool holders with rectangular shank for indexable inserts -- Part 9: Style L | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-10:2010 Tool holders with rectangular shank for indexable inserts -- Part 10: Style N | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-11:2010 Tool holders with rectangular shank for indexable inserts -- Part 11: Style R | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-12:2010 Tool holders with rectangular shank for indexable inserts -- Part 12: Style S | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-13:2010 Tool holders with rectangular shank for indexable inserts -- Part 13: Style T | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-14:2010 Tool holders with rectangular shank for indexable inserts -- Part 14: Style H | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5610-15:2010 Tool holders with rectangular shank for indexable inserts -- Part 15: Style V | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 5611:1995 Cartridges, type A, for indexable inserts -- Dimensions | 90.93 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 6262-1:1982 End mills with indexable inserts -- Part 1: End mills with flatted parallel shank | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 6262-2:1982 End mills with indexable inserts -- Part 2: End mills with Morse taper shank | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 6462:2011 Face and shoulder milling cutters with indexable inserts -- Dimensions | 60.60 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 6986:1983 Side and face milling (slotting) cutters with indexable inserts -- Dimensions | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 6987:2012 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 7755-1:1984 Hardmetal burrs -- Part 1: General specifications | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-2:1984 Hardmetal burrs -- Part 2: Cylindrical burrs (style A) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-3:1984 Hardmetal burrs -- Part 3: Cylindrical round- (ball-) nose burrs (style C) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-4:1984 Hardmetal burrs -- Part 4: Spherical burrs (style D) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-5:1984 Hardmetal burrs -- Part 5: Oval burrs (style E) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-6:1984 Hardmetal burrs -- Part 6: Arch round- (ball-) nose burrs (style F) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-7:1984 Hardmetal burrs -- Part 7: Arch pointed-nose burrs (style G) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-8:1984 Hardmetal burrs -- Part 8: Flame burrs (style H) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-9:1984 Hardmetal burrs -- Part 9: 60 degrees and 90 degrees cone burrs (styles J and K) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-10:1984 Hardmetal burrs -- Part 10: Conical round- (ball-) nose burrs (style L) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-11:1984 Hardmetal burrs -- Part 11: Conical pointed-nose burrs (style M) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 7755-12:1984 Hardmetal burrs -- Part 12: Inverted cone burrs (style N) | 90.92 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 9361-1:1991 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1: Dimensions of inserts without fixing hole | 90.20 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 9361-2:2011 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2: Dimensions of inserts with cylindrical fixing hole | 60.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 9766:2012 Drills with indexable inserts -- Cylindrical shanks with a parallel flat | 60.60 | 25.100.30 | ISO/TC 29/SC 9 |
| ISO 10145-1:1993 End mills with brazed helical hardmetal tips -- Part 1: Dimensions of end mills with parallel shank | 90.93 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 10145-2:1993 End mills with brazed helical hardmetal tips -- Part 2: Dimensions of end mills with 7/24 taper shank | 90.93 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 10910:1995 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers | 90.93 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 10911:2010 Solid hardmetal end mills with cylindrical shank -- Dimensions | 60.60 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 11529:2013 Milling cutters -- Designation -- Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges | 60.60 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 15917:2012 Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials | 60.60 | 25.100.20 | ISO/TC 29/SC 9 |
| ISO 16462:2004 Cubic boron nitride inserts, tipped or solid -- Dimensions, types | 90.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 16463:2004 Polycristalline diamond inserts, tipped -- Dimensions, types | 90.60 | 25.100.01 | ISO/TC 29/SC 9 |
| ISO 22037:2007 Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions | 90.93 | 25.100.20 | ISO/TC 29/SC 9 |
