Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 6751:2011 Tools for moulding -- Ejector pins with cylindrical head | 60.60 | 25.120.30 |
| ISO 6752:2008 Tools for pressing -- Round punches with 60 degrees conical head and straight shank | 90.93 | 25.120.10 |
| ISO 6753-1:2005 Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools | 90.93 | 25.120.10 |
| ISO 6753-2:1998 Tools for pressing and moulding -- Machined plates -- Part 2: Machined plates for moulds | 90.93 | 25.120.30 |
| ISO 8017:2007 Tools for moulding -- Guide pillars, straight and shouldered, and locating guide pillars, shouldered | 90.93 | 25.120.30 |
| ISO 8018:2007 Tools for moulding -- Guide bushes, headed, and locating guide bushes, headed | 90.93 | 25.120.30 |
| ISO 8020:2002 Tools for pressing -- Punches with cylindrical head and straight or reduced shank | 90.93 | 25.120.10 |
| ISO/DIS 8404 Tools for moulding -- Angle pins | 40.60 | 25.120.30 |
| ISO 8404:2003 Tools for moulding -- Angle pins | 90.92 | 25.120.30 |
| ISO/DIS 8405 Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes | 40.60 | 25.120.30 |
| ISO 8405:1998 Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes | 90.92 | 25.120.30 |
| ISO 8406:2008 Tools for moulding -- Mould bases -- Round locating elements and spacers | 90.93 | 25.120.30 |
| ISO 8693:2011 Tools for moulding -- Flat ejector pins | 60.60 | 25.120.30 |
| ISO 8694:2011 Tools for moulding -- Shouldered ejector pins | 60.60 | 25.120.30 |
| ISO 8695:2010 Tools for pressing -- Punches -- Nomenclature and terminology | 60.60 | 25.120.10 01.040.25 |
| ISO 8977:2003 Tools for pressing -- Matrixes | 90.93 | 25.120.10 |
| ISO 9181:2007 Tools for pressing -- Round punches with 60 degrees conical head and reduced shank | 90.93 | 25.120.10 |
| ISO/DIS 9182-1 Tools for pressing -- Guide pillars -- Part 1: Types | 40.99 | 25.120.10 |
| ISO/DIS 9182-2 Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars | 40.99 | 25.120.10 |
| ISO/DIS 9182-3 Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars | 40.99 | 25.120.10 |
| ISO/DIS 9182-4 Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush | 40.99 | 25.120.10 |
| ISO/DIS 9182-5 Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange | 40.99 | 25.120.10 |
| ISO 9183-1:2008 Tools for pressing -- Wear plates for press dies -- Part 1: Type A | 90.93 | 25.120.10 |
| ISO 9183-2:2011 Tools for pressing -- Wear plates for press dies -- Part 2: Type B | 60.60 | 25.120.10 |
| ISO/DIS 9448-1 Tools for pressing -- Guide bushes -- Part 1: Forms | 40.99 | 25.120.10 |
| ISO/DIS 9448-2 Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1 | 40.99 | 25.120.10 |
| ISO/DIS 9448-3 Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1 | 40.99 | 25.120.10 |
| ISO/DIS 9448-4 Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1 | 40.99 | 25.120.10 |
| ISO/DIS 9448-5 Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1 | 40.99 | 25.120.10 |
| ISO/DIS 9448-6 Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1 | 40.99 | 25.120.10 |
| ISO/DIS 9448-7 Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1 | 40.99 | 25.120.10 |
| ISO/DIS 9448-8 Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1 | 40.99 | 25.120.10 |
| ISO/DIS 9448-9 Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2 | 40.99 | 25.120.10 |
| ISO/DIS 9448-10 Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2 | 40.99 | 25.120.10 |
| ISO/DIS 9448-11 Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2 | 40.99 | 25.120.10 |
| ISO 9449:2007 Tools for moulding -- Centring sleeves | 90.93 | 25.120.30 |
| ISO 10069-1:2008 Tools for pressing -- Elastomer pressure springs -- Part 1: General specification | 90.93 | 25.120.10 |
| ISO 10069-2:2008 Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories | 90.93 | 25.120.10 |
| ISO 10071-1:2008 Tools for pressing -- Ball-lock punches -- Part 1: Ball-lock punches for light duty | 90.93 | 25.120.10 |
| ISO 10071-2:2005 Tools for pressing -- Ball-lock punches -- Part 2: Ball-lock punches for heavy duty | 90.93 | 25.120.10 |
| ISO 10072:2004 Tools for moulding -- Sprue bushes -- Dimensions | 90.93 | 25.120.30 |
| ISO 10073:2008 Tools for moulding -- Support pillars | 90.93 | 25.120.30 |
| ISO 10242-1:2011 Tools for pressing -- Punch holder shanks -- Part 1: Type A | 60.60 | 25.120.10 |
| ISO 10242-2:2008 Tools for pressing -- Punch holder shanks -- Part 2: Type C | 90.93 | 25.120.10 |
| ISO 10242-3:2008 Tools for pressing -- Punch holder shanks -- Part 3: Type D | 90.93 | 25.120.10 |
| ISO 10243:2010 Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding | 60.60 | 25.120.10 01.070 |
| ISO 10243:2010/Amd 1:2011 | 60.60 | 25.120.10 01.070 |
| ISO 10907-1:2008 Tools for moulding -- Locating rings -- Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) | 90.93 | 25.120.30 |
| ISO 10907-2:2007 Tools for moulding -- Locating rings -- Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D) | 90.93 | 25.120.30 |
| ISO 11415:1997 Tools for pressing -- Die sets | 90.92 | 25.120.10 |
| ISO 11900-1:2007 Tools for pressing -- Ball-lock punch retainers -- Part 1: Types A and B, rectangular and square for light duty | 90.93 | 25.120.10 |
| ISO 11900-2:2008 Tools for pressing -- Ball-lock punch retainers -- Part 2: Types C and D, reduced for light duty | 90.93 | 25.120.10 |
| ISO 11900-3:2004 Tools for pressing -- Ball-lock punch retainers -- Part 3: Type E, reduced for heavy duty | 90.93 | 25.120.10 |
| ISO 11901-1:2003 Tools for pressing -- Gas springs -- Part 1: General specifications | 90.93 | 25.120.10 |
| ISO 11901-2:2004 Tools for pressing -- Gas springs -- Part 2: Specification of accessories | 90.93 | 25.120.10 |
| ISO/DIS 11901-3 Tools for pressing -- Gas springs -- Part 3: Gas spring with increased spring force and compact build height | 40.00 | 25.120.10 |
| ISO/DIS 11901-4 Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring force and same build height | 40.00 | 25.120.10 |
| ISO 11903:2008 Tools for pressing -- Guide pillar mountings | 90.93 | 25.120.10 |
| ISO 12165:2000 Tools for moulding -- Components of compression and injection moulds and diecasting dies -- Terms and symbols | 90.93 | 01.040.25 25.120.30 |
| ISO 15600:2000 Tools for moulding -- Thermal insulating sheets for injection moulds | 90.93 | 25.120.30 |
| ISO 16366:2008 Tools for pressing -- L-shaped guides | 90.93 | 25.120.10 |
| ISO 16367:2008 Tools for pressing -- Guide plates -- U- and V-blocks | 90.93 | 25.120.10 |
| ISO 16915:2003 Tools for moulding -- Sprue pullers | 90.93 | 25.120.30 |
| ISO 16916:2004 Tools for moulding -- Tool specification sheet for injection moulds | 90.93 | 25.120.30 |
| ISO 18084:2011 Press tools for tablets -- Punches and dies | 60.60 | 25.120.10 |
| ISO 23480:2013 Tools for pressing -- Sliding plates | 60.60 | 25.120.10 |
| ISO 23481:2008 Tools for pressing -- Cam driver plates | 90.92 | 25.120.10 |
| ISO/DIS 23481 Tools for pressing -- Cam driver plates | 40.60 | 25.120.10 |
| ISO 24233:2008 Tools for moulding -- Tool specification sheet for diecasting dies | 90.93 | 25.120.30 |
| ISO 28238:2010 Compression and injection moulds -- Components for gating systems | 60.60 | 01.040.25 25.120.30 |
