Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 235:1980 Parallel shank jobber and stub series drills and Morse taper shank drills | 90.60 | 25.100.30 |
| ISO 235:1980/Cor 1:1996 | 60.60 | 25.100.30 |
| ISO 236-1:1976 Hand reamers | 90.93 | 25.100.30 |
| ISO 236-2:2013 Reamers -- Part 2: Long fluted machine reamers with Morse taper shanks | 60.60 | 25.100.30 |
| ISO 238:1974 Reduction sleeves and extension sockets for tools with Morse taper shanks | 90.60 | 25.060.20 |
| ISO 240:1994 Milling cutters -- Interchangeability dimensions for cutter arbors or cutter mandrels | 90.92 | 25.100.20 |
| ISO/DIS 240 Milling cutters -- Interchangeability dimensions for cutter arbors or cutter mandrels | 40.99 | 25.100.20 |
| ISO 494:2009 Cylindrical shank twist drills -- Long series | 60.60 | 25.100.30 |
| ISO 521:2011 Machine chucking reamers with cylindrical shanks and Morse taper shanks | 60.60 | 25.100.30 |
| ISO 522:1975 Special tolerances for reamers | 90.20 | 25.100.30 |
| ISO 529:1993 Short machine taps and hand taps | 90.93 | 25.100.50 |
| ISO 839-1:2006 Milling machine arbors with 7/24 tapers -- Part 1: Dimensions and designation | 90.93 | 25.060.20 |
| ISO 839-2:1977 Milling machine arbors with 7/24 tapers -- Part 2: Accessories | 90.60 | 25.060.20 |
| ISO 866:1975 Centre drills for centre holes without protecting chamfers -- Type A | 90.60 | 25.100.30 |
| ISO 1641-1:2003 End mills and slot drills -- Part 1: Milling cutters with cylindrical shanks | 90.93 | 25.100.20 |
| ISO 1641-2:2011 End mills and slot drills -- Part 2: Dimensions and designation of milling cutters with Morse taper shanks | 60.60 | 25.100.20 |
| ISO 1641-3:2011 End mills and slot drills -- Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks | 60.60 | 25.100.20 |
| ISO 2238:2011 Machine bridge reamers | 60.60 | 25.100.30 |
| ISO 2250:2009 Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks | 60.60 | 25.100.30 |
| ISO 2283:2000 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in -- Reduced shank taps | 90.93 | 25.100.50 |
| ISO 2284:1987 Hand taps for parallel and taper pipe threads -- General dimensions and marking | 90.93 | 25.100.50 |
| ISO 2296:2011 Metal slitting saws with fine and coarse teeth -- Metric series | 60.60 | 25.100.40 |
| ISO 2306:1972 Drills for use prior to tapping screw threads | 90.93 | 25.100.30 |
| ISO 2402:1972 Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers | 90.93 | 25.100.30 |
| ISO 2540:1973 Centre drills for centre holes with protecting chamfer -- Type B | 90.60 | 25.100.30 |
| ISO 2541:1972 Centre drills for centre holes with radius form -- Type R | 90.60 | 25.100.30 |
| ISO 2568:1988 Hand- and machine-operated circular screwing dies and hand-operated die stocks | 90.93 | 25.100.50 |
| ISO 2584:1972 Cylindrical cutters with plain bore and key drive -- Metric series | 90.60 | 25.100.20 |
| ISO 2585:1972 Slotting cutters with plain bore and key drive -- Metric series | 90.93 | 25.100.20 |
| ISO 2586:1985 Shell end mills with plain bore and tenon drive -- Metric series | 90.93 | 25.100.20 |
| ISO 2587:1972 Side and face milling cutters with plain bore and key drive -- Metric series | 90.93 | 25.100.20 |
| ISO 2780:2006 Milling cutters with tenon drive -- Interchangeability dimensions for cutter arbors -- Metric series | 90.93 | 25.100.20 |
| ISO 2857:1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches -- Manufacturing tolerances on the threaded portion | 90.93 | 25.100.50 |
| ISO 2857:1973/Cor 1:1990 | 60.60 | 25.100.50 |
| ISO 2857:1973/Amd 1:1984 | 60.60 | 25.100.50 |
| ISO 2857:1973/Amd 2:1986 | 60.60 | 25.100.50 |
| ISO 2940-1:1974 Milling cutters mounted on centring arbors having a 7/24 taper -- Fitting dimensions -- Centring arbors | 90.93 | 25.100.20 |
| ISO 2940-2:1974 Milling cutters mounted on centring arbors having a 7/24 taper -- Inserted tooth cutters | 90.93 | 25.100.20 |
| ISO 3291:1995 Extra-long Morse taper shank twist drills | 90.60 | 25.100.30 |
| ISO 3292:1995 Extra-long parallel shank twist drills | 90.60 | 25.100.30 |
| ISO 3293:1975 Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive | 90.20 | 25.100.30 |
| ISO 3294:1975 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive | 90.20 | 25.100.30 |
| ISO 3314:1975 Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive | 90.93 | 25.100.30 |
| ISO 3337:2000 T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole | 90.93 | 25.100.20 |
| ISO 3338-1:1996 Cylindrical shanks for milling cutters -- Part 1: Dimensional characteristics of plain cylindrical shanks | 90.60 | 25.100.20 |
| ISO/FDIS 3338-2 Cylindrical shanks for milling cutters -- Part 2: Dimensional characteristics of flatted cylindrical shanks | 50.20 | 25.100.20 |
| ISO 3338-2:2007 Cylindrical shanks for milling cutters -- Part 2: Dimensional characteristics of flatted cylindrical shanks | 90.92 | 25.100.20 |
| ISO 3338-3:1996 Cylindrical shanks for milling cutters -- Part 3: Dimensional characteristics of threaded shanks | 90.60 | 25.100.20 |
| ISO 3438:2013 Subland twist drills for holes prior to tapping screw threads | 60.60 | 25.100.30 |
| ISO 3465:1975 Hand taper pin reamers | 90.93 | 25.100.30 |
| ISO 3466:1975 Machine taper pin reamers with parallel shanks | 90.93 | 25.100.30 |
| ISO 3467:1975 Machine taper pin reamers with Morse taper shanks | 90.93 | 25.100.30 |
| ISO 3855:1977 Milling cutters -- Nomenclature | 90.93 | 25.100.20 01.040.25 |
| ISO 3855:1977/Cor 1:1996 | 60.60 | 25.100.20 01.040.25 |
| ISO 3859:2000 Inverse dovetail cutters and dovetail cutters with cylindrical shanks | 90.93 | 25.100.20 |
| ISO 3860:2011 Bore cutters with key drive -- Form milling cutters with constant profile | 60.60 | 25.100.20 |
| ISO 3936:1993 Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions | 90.93 | 25.060.20 |
| ISO 3937-1:2008 Cutter arbors with tenon drive -- Part 1: Dimensions of Morse taper | 90.60 | 25.060.20 |
| ISO 3937-2:2008 Cutter arbors with tenon drive -- Part 2: Dimensions of 7/24 taper | 90.60 | 25.060.20 |
| ISO 3937-3:2008 Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface | 90.60 | 25.060.20 |
| ISO/NP 3940 Tapered die-sinking cutters with parallel shanks | 10.99 | 25.100.20 |
| ISO 3940:1977 Tapered die-sinking cutters with parallel shanks | 90.92 | 25.100.20 |
| ISO 4202:1978 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks | 90.60 | 25.060.20 |
| ISO 4203:1978 Parallel shank tools -- Driving tenons and sockets -- Dimensions | 90.60 | 25.100.01 |
| ISO 4204:1977 Countersinks, 90 degrees, with Morse taper shanks and detachable pilots | 90.60 | 25.100.30 |
| ISO 4205:1991 Countersinks, 90 degrees, with parallel shanks and solid pilots | 90.60 | 25.100.30 |
| ISO 4206:1991 Counterbores with parallel shanks and solid pilots | 90.60 | 25.100.30 |
| ISO 4207:1977 Counterbores with Morse taper shanks and detachable pilots | 90.60 | 25.060.20 |
| ISO 4208:1977 Detachable pilots for use with counterbores and 90 degrees countersinks -- Dimensions | 90.60 | 25.100.30 |
| ISO 4230:1987 Hand- and machine-operated circular screwing dies for taper pipe threads -- R series | 90.93 | 25.100.50 |
| ISO 4231:1987 Hand- and machine-operated circular screwing dies for parallel pipe threads - G series | 90.93 | 25.100.50 |
| ISO 4248:1978 Jig bushes -- Definitions and nomenclature | 90.60 | 25.060.20 01.040.25 |
| ISO 5413:1993 Machine tools -- Positive drive of Morse tapers | 90.93 | 25.060.20 |
| ISO 5414-1:2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 1: Dimensions of the driving system of tool shanks | 90.60 | 25.060.20 |
| ISO 5414-2:2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 2: Connecting dimensions of chucks and designation | 90.60 | 25.060.20 |
| ISO 5415:2007 Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw | 90.93 | 25.060.20 |
| ISO 5419:1982 Twist drills -- Terms, definitions and types | 90.93 | 25.100.30 01.040.25 |
| ISO 5419:1982/Cor 1:1996 | 60.60 | 25.100.30 01.040.25 |
| ISO 5420:1983 Reamers -- Terms, definitions and types | 90.93 | 25.100.30 01.040.25 |
| ISO 5468:2006 Rotary and rotary impact masonry drill bits with hardmetal tips -- Dimensions | 90.93 | 25.100.30 |
| ISO 5967:1981 Taps and thread cutting -- Nomenclature of the main types and terminology | 90.93 | 01.040.25 25.100.50 |
| ISO 5968:1981 Circular screwing dies -- Terminology | 90.93 | 25.100.50 01.040.25 |
| ISO 5969:1979 Ground thread taps for pipe threads G series and Rp series -- Tolerances on the threaded portion | 90.93 | 25.100.50 |
| ISO 5969:1979/Cor 1:1991 | 60.60 | 25.100.50 |
| ISO 6108:1978 Double equal angle cutters with plain bore and key drive | 90.93 | 25.100.20 |
| ISO 7079:1981 Core drills with parallel shanks and with Morse taper shanks | 90.60 | 25.100.30 |
| ISO 7226:1988 Hexagonal dienuts | 90.93 | 25.100.50 |
| ISO/DIS 8051 Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess | 40.99 | 25.100.50 |
| ISO 8051:1999 Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess | 90.92 | 25.100.50 |
| ISO 8830:1991 High-speed steel machine taps with ground threads -- Technical specifications | 90.60 | 25.100.50 |
| ISO 10643:2009 Dimensions of accessories for cutter arbors with parallel key and tenon drive | 60.60 | 25.100.01 |
| ISO/FDIS 10649-1 Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions | 50.20 | 25.060.20 |
| ISO 10649-1:2010 Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions | 90.92 | 25.060.20 |
| ISO 10649-2:2010 Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface | 90.92 | 25.060.20 |
| ISO/FDIS 10649-2 Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface | 50.20 | 25.060.20 |
| ISO 10649-3:2010 Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers | 90.92 | 25.060.20 |
| ISO/FDIS 10649-3 Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer | 50.20 | 25.060.20 |
| ISO/FDIS 10649-4 Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer | 50.20 | 25.060.20 |
| ISO 10649-4:2010 Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers | 90.92 | 25.060.20 |
| ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive -- Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface | 60.60 | 25.060.20 |
| ISO 10649-6:2012 Cutter arbors with parallel key and tenon drive -- Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system | 60.60 | 25.060.20 |
| ISO 10898:1992 Spot drills | 90.20 | 25.100.30 |
| ISO 10899:1996 High-speed steel two-flute twist drills -- Technical specifications | 90.60 | 25.100.30 |
| ISO 12197:1996 Woodruff keaseat cutters -- Dimensions | 90.60 | 25.100.20 |
