Home

Standards catalogue

Subscribe to updates

ISO/TC 29  - Small tools

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 29 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 234-1:1983
Files and rasps -- Part 1: Dimensions
90.93 25.100.60ISO/TC 29
ISO 234-2:1982
Files and rasps -- Part 2: Characteristics of cut
90.93 25.100.60ISO/TC 29
ISO 235:1980
Parallel shank jobber and stub series drills and Morse taper shank drills
90.92 25.100.30ISO/TC 29/SC 9
ISO 235:1980/Cor 1:1996
60.60 25.100.30ISO/TC 29/SC 2
ISO 236-1:1976
Hand reamers
90.93 25.100.30ISO/TC 29/SC 2
ISO 236-2:2013
Reamers -- Part 2: Long fluted machine reamers with Morse taper shanks
60.60 25.100.30ISO/TC 29/SC 9
ISO 237:1975
Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares
90.93 25.100.01ISO/TC 29/SC 2
ISO 238:1974
Reduction sleeves and extension sockets for tools with Morse taper shanks
90.92 25.060.20ISO/TC 29/SC 2
ISO 239:1999
Drill chuck tapers
90.93 25.100.30ISO/TC 29/SC 2
ISO 240:1994
Milling cutters -- Interchangeability dimensions for cutter arbors or cutter mandrels
90.92 25.100.20ISO/TC 29/SC 9
ISO 241:1994
Shanks for turning and planing tools -- Shapes and dimensions of the section
90.93 25.100.10
25.100.25
ISO/TC 29/SC 2
ISO 242:2014
Carbide tips for brazing on turning tools
60.60 25.100.10ISO/TC 29/SC 9
ISO 243:2014
Turning tools with carbide tips -- External tools
60.60 25.100.10ISO/TC 29/SC 9
ISO 296:1991
Machine tools -- Self-holding tapers for tool shanks
90.93 25.060.20ISO/TC 29/SC 2
ISO 297:1988
7/24 tapers for tool shanks for manual changing
90.93 25.060.20ISO/TC 29/SC 2
ISO 494:2009
Cylindrical shank twist drills -- Long series
90.60 25.100.30ISO/TC 29/SC 2
ISO 504:1975
Turning tools with carbide tips -- Designation and marking
90.93 25.100.10ISO/TC 29/SC 9
ISO 513:2012
Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application
60.60 25.100.01ISO/TC 29/SC 9
ISO 514:2014
Turning tools with carbide tips -- Internal tools
60.60 25.100.10ISO/TC 29/SC 9
ISO 521:2011
Machine chucking reamers with cylindrical shanks and Morse taper shanks
60.60 25.100.30ISO/TC 29/SC 2
ISO 522:1975
Special tolerances for reamers
90.93 25.100.30ISO/TC 29/SC 9
ISO 525:2013
Bonded abrasive products -- General requirements
60.60 25.100.70ISO/TC 29/SC 5
ISO 529:1993
Short machine taps and hand taps
90.93 25.100.50ISO/TC 29/SC 9
ISO 603-1:1999
Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical grinding between centres
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-1:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-2:1999
Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centreless external cylindrical grinding
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-2:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-3:1999
Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical grinding
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-3:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-4:1999
Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface grinding/peripheral grinding
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-4:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-5:1999
Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for surface grinding/face grinding
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-5:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-6:1999
Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-6:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-7:1999
Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-7:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-8:1999
Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and fettling/snagging
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-8:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-9:1999
Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-9:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-10:1999
Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-10:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-11:1999
Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks
90.20 25.100.70ISO/TC 29/SC 5
ISO 603-11:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-12:1999
Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-12:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-13:1999
Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-13:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-14:1999
Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-14:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-15:1999
Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-15:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-16:1999
Bonded abrasive produtcs -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools
90.93 25.100.70ISO/TC 29/SC 5
ISO 603-16:1999/Cor 1:1999
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-17:2014
Bonded abrasive products -- Dimensions -- Part 17: Spindle mounted wheels (ISO type 52)
60.60 25.100.70ISO/TC 29/SC 5
ISO 603-18:2013
Bonded abrasive products -- Dimensions -- Part 18: Grinding wheels for flat glass edge grinding machines
60.60 25.100.70ISO/TC 29/SC 5
ISO 691:2005
Assembly tools for screws and nuts -- Wrench and socket openings -- Tolerances for general use
90.60 25.140.30ISO/TC 29/SC 10
ISO 839-1:2006
Milling machine arbors with 7/24 tapers -- Part 1: Dimensions and designation
90.93 25.060.20ISO/TC 29/SC 2
ISO 839-2:1977
Milling machine arbors with 7/24 tapers -- Part 2: Accessories
90.93 25.060.20ISO/TC 29/SC 2
ISO 866:1975
Centre drills for centre holes without protecting chamfers -- Type A
90.92 25.100.30ISO/TC 29/SC 9
ISO 883:2013
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions
60.60 25.100.01ISO/TC 29/SC 9
ISO 1080:1975
Machine tools -- Morse taper shanks -- Cotter slots with taper keys
90.93 25.060.20ISO/TC 29/SC 2
ISO 1085:1999
Assembly tools for screws and nuts -- Double-ended wrenches -- Size pairing
90.60 25.140.30ISO/TC 29/SC 10
ISO 1173:2001
Assembly tools for screws and nuts -- Drive ends for hand- and machine-operated screwdriver bits and connecting parts -- Dimensions, torque testing
90.93 25.140.30ISO/TC 29/SC 10
ISO 1174-1:2011
Assembly tools for screws and nuts -- Driving squares -- Part 1: Driving squares for hand socket tools
60.60 25.140.30ISO/TC 29/SC 10
ISO 1174-2:1996
Assembly tools for screws and nuts -- Driving squares -- Part 2: Driving squares for power socket tools
90.60 25.140.01ISO/TC 29/SC 10
ISO 1180:1983
Shanks for pneumatic tools and fitting dimensions of chuck bushings
90.93 25.140.10ISO/TC 29
ISO 1180:1983/Add 1:1985
90.93 25.140.10ISO/TC 29
ISO 1641-1:2003
End mills and slot drills -- Part 1: Milling cutters with cylindrical shanks
90.92 25.100.20ISO/TC 29/SC 9
ISO 1641-2:2011
End mills and slot drills -- Part 2: Dimensions and designation of milling cutters with Morse taper shanks
60.60 25.100.20ISO/TC 29/SC 2
ISO 1641-3:2011
End mills and slot drills -- Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
60.60 25.100.20ISO/TC 29/SC 2
ISO 1651:1974
Tube drawing mandrels
90.93 25.120.20ISO/TC 29
ISO 1651:1974/Amd 1:1982
60.60 25.120.20ISO/TC 29
ISO 1684:1975
Wire, bar and tube drawing dies -- Specifications
90.93 25.120.20ISO/TC 29
ISO 1684:1975/Amd 2:1982
60.60 25.120.20ISO/TC 29
ISO 1703:2005
Assembly tools for screws and nuts -- Designation and nomenclature
90.60 25.140.01
01.040.25
ISO/TC 29/SC 10
ISO 1711-1:2007
Assembly tools for screws and nuts -- Technical specifications -- Part 1: Hand-operated wrenches and sockets
90.92 25.140.01ISO/TC 29/SC 10
ISO 1711-2:2005
Assembly tools for screws and nuts -- Technical specifications -- Part 2: Machine-operated sockets ("impact")
90.92 25.140.01ISO/TC 29/SC 10
ISO 1832:2012
Indexable inserts for cutting tools -- Designation
60.60 25.100.01ISO/TC 29/SC 9
ISO 2236:1991
Assembly tools for screws and nuts -- Forged and tubular socket wrenches -- Maximum outside head dimensions
90.93 25.140.30ISO/TC 29/SC 10
ISO 2238:2011
Machine bridge reamers
60.60 25.100.30ISO/TC 29/SC 2
ISO 2250:2009
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
90.60 25.100.30ISO/TC 29/SC 2
ISO 2283:2000
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in -- Reduced shank taps
90.93 25.100.50ISO/TC 29/SC 9
ISO 2284:1987
Hand taps for parallel and taper pipe threads -- General dimensions and marking
90.93 25.100.50ISO/TC 29/SC 9
ISO 2296:2011
Metal slitting saws with fine and coarse teeth -- Metric series
60.60 25.100.40ISO/TC 29/SC 2
ISO 2306:1972
Drills for use prior to tapping screw threads
90.93 25.100.30ISO/TC 29/SC 9
ISO 2336-1:1996
Hacksaw blades -- Part 1: Dimensions for hand blades
90.93 25.100.40ISO/TC 29
ISO 2336-2:2006
Hacksaw blades -- Part 2: Dimensions for machine blades
90.93 25.100.40ISO/TC 29/SC 9
ISO 2351-1:2007
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 1: Screwdriver bits for slotted head screws
90.93 25.140.01ISO/TC 29/SC 10
ISO 2351-2:2002
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 2: Screwdriver bits for cross-recessed head screws
90.93 25.140.01ISO/TC 29/SC 10
ISO 2351-3:2014
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 3: Screwdriver bits for hexagon socket screws
60.60 25.140.01ISO/TC 29/SC 10
ISO 2380-1:2004
Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 1: Tips for hand- and machine-operated screwdrivers
90.93 25.140.01ISO/TC 29/SC 10
ISO 2380-2:2004
Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
90.93 25.140.01ISO/TC 29/SC 10
ISO 2402:1972
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
90.93 25.100.30ISO/TC 29/SC 9
ISO 2421:2003
Coated abrasives -- Cylindrical sleeves
90.93 25.100.70ISO/TC 29/SC 5
ISO 2540:1973
Centre drills for centre holes with protecting chamfer -- Type B
90.92 25.100.30ISO/TC 29/SC 9
ISO 2541:1972
Centre drills for centre holes with radius form -- Type R
90.92 25.100.30ISO/TC 29/SC 9
ISO 2568:1988
Hand- and machine-operated circular screwing dies and hand-operated die stocks
90.93 25.100.50ISO/TC 29/SC 9
ISO 2584:1972
Cylindrical cutters with plain bore and key drive -- Metric series
90.92 25.100.20ISO/TC 29/SC 9
ISO 2585:1972
Slotting cutters with plain bore and key drive -- Metric series
90.93 25.100.20ISO/TC 29/SC 9
ISO 2586:1985
Shell end mills with plain bore and tenon drive -- Metric series
90.93 25.100.20ISO/TC 29/SC 9
ISO 2587:1972
Side and face milling cutters with plain bore and key drive -- Metric series
90.93 25.100.20ISO/TC 29/SC 9
ISO 2725-1:2007
Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated sockets
90.92 25.140.30ISO/TC 29/SC 10
ISO 2725-2:2007
Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact")
90.92 25.140.01ISO/TC 29/SC 10
ISO 2725-3:2001
Assembly tools for screws and nuts -- Square drive sockets -- Part 3: Machine-operated sockets ("non-impact") -- Dimensions
90.92 25.140.01ISO/TC 29/SC 10
ISO 2726:1995
Woodworking tools -- Metal-bodied bench planes, plane cutters and cap irons
90.93 79.120.20ISO/TC 29/SC 10
ISO 2729:1995
Woodworking tools -- Chisels and gouges
90.93 79.120.20ISO/TC 29
ISO 2730:1973
Woodworking tools -- Wooden bodied planes
90.93 79.120.20ISO/TC 29
ISO 2780:2006
Milling cutters with tenon drive -- Interchangeability dimensions for cutter arbors -- Metric series
90.93 25.100.20ISO/TC 29/SC 9
ISO 2804:1996
Wire, bar or tube drawing dies -- As-sintered pellets of hardmetal (carbide) -- Dimensions
90.93 25.120.20ISO/TC 29
ISO 2857:1973
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches -- Manufacturing tolerances on the threaded portion
90.93 25.100.50ISO/TC 29/SC 9
ISO 2857:1973/Amd 1:1984
60.60 25.100.50ISO/TC 29/SC 2
ISO 2857:1973/Cor 1:1990
60.60 25.100.50ISO/TC 29/SC 2
ISO 2857:1973/Amd 2:1986
60.60 25.100.50ISO/TC 29/SC 2
ISO 2924:1973
Solid and segmental circular saws for cold cutting of metals -- Interchangeability dimensions of the drive -- Saw diameter range 224 to 2 240 mm
90.93 25.100.40ISO/TC 29/SC 9
ISO 2935:1974
Circular saw blades for woodworking -- Dimensions
90.93 79.120.20ISO/TC 29/SC 9
ISO 2936:2014
Assembly tools for screws and nuts -- Hexagon socket screw keys
60.60 25.140.30ISO/TC 29/SC 10
ISO 2940-1:1974
Milling cutters mounted on centring arbors having a 7/24 taper -- Fitting dimensions -- Centring arbors
90.93 25.100.20ISO/TC 29/SC 2
ISO 2940-2:1974
Milling cutters mounted on centring arbors having a 7/24 taper -- Inserted tooth cutters
90.93 25.100.20ISO/TC 29/SC 2
ISO 2976:2005
Coated abrasives -- Abrasive belts -- Selection of width/length combinations
90.60 25.100.70ISO/TC 29/SC 5
ISO 3002-1:1982
Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting tools -- General terms, reference systems, tool and working angles, chip breakers
90.93 25.100.01
01.060
ISO/TC 29
ISO 3002-1:1982/Amd 1:1992
60.60 25.100.01
01.060
ISO/TC 29
ISO 3002-2:1982
Basic quantities in cutting and grinding -- Part 2: Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles
90.20 01.060
25.100.01
ISO/TC 29
ISO 3002-3:1984
Basic quantities in cutting and grinding -- Part 3: Geometric and kinematic quantities in cutting
90.20 01.060
25.100.01
ISO/TC 29
ISO 3002-4:1984
Basic quantities in cutting and grinding -- Part 4: Forces, energy, power
90.93 25.100.01
01.060
ISO/TC 29
ISO 3002-5:1989
Basic quantities in cutting and grinding -- Part 5: Basic terminology for grinding processes using grinding wheels
90.93 25.100.01
01.060
01.040.25
ISO/TC 29
ISO 3286:1976
Single point cutting tools -- Corner radii
90.20 25.100.01ISO/TC 29/SC 9
ISO 3291:1995
Extra-long Morse taper shank twist drills
90.92 25.100.30ISO/TC 29/SC 9
ISO 3292:1995
Extra-long parallel shank twist drills
90.92 25.100.30ISO/TC 29/SC 9
ISO 3293:1975
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
90.92 25.100.30ISO/TC 29/SC 9
ISO 3294:1975
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
90.92 25.100.30ISO/TC 29/SC 9
ISO 3295:1975
Narrow bandsaw blades for woodworking -- Dimensions
90.93 79.120.20ISO/TC 29/SC 9
ISO 3314:1975
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
90.93 25.100.30ISO/TC 29/SC 9
ISO 3315:2011
Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and tests
60.60 25.140.30ISO/TC 29/SC 10
ISO 3316:2012
Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and tests
60.60 25.140.30ISO/TC 29/SC 10
ISO 3317:2009
Assembly tools for screws and nuts -- Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
90.92 25.140.30ISO/TC 29/SC 10
ISO 3318:2009
Assembly tools for screws and nuts -- Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches -- Maximum widths of heads
90.60 25.140.30ISO/TC 29/SC 10
ISO 3337:2000
T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
90.93 25.100.20ISO/TC 29/SC 9
ISO 3338-1:1996
Cylindrical shanks for milling cutters -- Part 1: Dimensional characteristics of plain cylindrical shanks
90.92 25.100.20ISO/TC 29/SC 9
ISO 3338-2:2013
Cylindrical shanks for milling cutters -- Part 2: Dimensional characteristics of flatted cylindrical shanks
60.60 25.100.20ISO/TC 29/SC 2
ISO 3338-3:1996
Cylindrical shanks for milling cutters -- Part 3: Dimensional characteristics of threaded shanks
90.92 25.100.20ISO/TC 29/SC 2
ISO 3364:2011
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions
60.60 25.100.01ISO/TC 29/SC 9
ISO 3365:1985
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions
90.20 25.100.01ISO/TC 29/SC 9
ISO 3366:1999
Coated abrasives -- Abrasive rolls
90.20 25.100.70ISO/TC 29/SC 5
ISO 3438:2013
Subland twist drills for holes prior to tapping screw threads
60.60 25.100.30ISO/TC 29/SC 2
ISO 3465:1975
Hand taper pin reamers
90.93 25.100.30ISO/TC 29/SC 9
ISO 3466:1975
Machine taper pin reamers with parallel shanks
90.60 25.100.30ISO/TC 29/SC 9
ISO 3467:1975
Machine taper pin reamers with Morse taper shanks
90.60 25.100.30ISO/TC 29/SC 9
ISO 3685:1993
Tool-life testing with single-point turning tools
90.93 25.100.10ISO/TC 29/SC 9
ISO 3855:1977
Milling cutters -- Nomenclature
90.93 25.100.20
01.040.25
ISO/TC 29/SC 9
ISO 3855:1977/Cor 1:1996
60.60 25.100.20
01.040.25
ISO/TC 29/SC 2
ISO 3859:2000
Inverse dovetail cutters and dovetail cutters with cylindrical shanks
90.93 25.100.20ISO/TC 29/SC 9
ISO 3860:2011
Bore cutters with key drive -- Form milling cutters with constant profile
60.60 25.100.20ISO/TC 29/SC 2
ISO 3919:2005
Coated abrasives -- Flap wheels with shaft
90.20 25.100.70ISO/TC 29/SC 5
ISO 3936:1993
Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions
90.93 25.060.20ISO/TC 29/SC 2
ISO 3937-1:2008
Cutter arbors with tenon drive -- Part 1: Dimensions of Morse taper
90.93 25.060.20ISO/TC 29/SC 2
ISO 3937-2:2008
Cutter arbors with tenon drive -- Part 2: Dimensions of 7/24 taper
90.93 25.060.20ISO/TC 29/SC 2
ISO 3937-3:2008
Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface
90.93 25.060.20ISO/TC 29/SC 2
ISO 3940:1977
Tapered die-sinking cutters with parallel shanks
90.93 25.100.20ISO/TC 29/SC 9
ISO 4202:1978
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
90.92 25.060.20ISO/TC 29/SC 2
ISO 4203:1978
Parallel shank tools -- Driving tenons and sockets -- Dimensions
90.93 25.100.01ISO/TC 29/SC 2
ISO 4204:1977
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots
90.92 25.100.30ISO/TC 29/SC 9
ISO 4205:1991
Countersinks, 90 degrees, with parallel shanks and solid pilots
90.92 25.100.30ISO/TC 29/SC 9
ISO 4206:1991
Counterbores with parallel shanks and solid pilots
90.92 25.100.30ISO/TC 29/SC 9
ISO 4207:1977
Counterbores with Morse taper shanks and detachable pilots
90.92 25.060.20ISO/TC 29/SC 9
ISO 4208:1977
Detachable pilots for use with counterbores and 90 degrees countersinks -- Dimensions
90.93 25.100.30ISO/TC 29/SC 9
ISO 4228:1986
Spanners and wrenches -- Spline drive ends for power socket wrenches
90.93 25.140.01ISO/TC 29/SC 10
ISO 4229:2009
Assembly tools for screws and nuts -- Single-head engineer's wrenches for lower torque applications -- Maximum outside dimensions of heads and test torques
90.60 25.140.30ISO/TC 29/SC 10
ISO 4230:1987
Hand- and machine-operated circular screwing dies for taper pipe threads -- R series
90.93 25.100.50ISO/TC 29/SC 9
ISO 4231:1987
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
90.93 25.100.50ISO/TC 29/SC 9
ISO 4248:1978
Jig bushes -- Definitions and nomenclature
90.93 25.060.20
01.040.25
ISO/TC 29/SC 2
ISO 4875-1:2006
Metal-cutting band saw blades -- Part 1: Vocabulary
90.93 25.100.40
01.040.25
ISO/TC 29/SC 9
ISO 4875-2:2006
Metal-cutting band saw blades -- Part 2: Characteristics and dimensions
90.93 25.100.40ISO/TC 29
ISO 5396:1977
Hardmetal heading dies -- Terminology
90.93 25.100.50
01.040.25
ISO/TC 29/SC 9
ISO 5407:1981
As-sintered hardmetal pellets used in heading dies -- Dimensions and tolerances
90.93 25.100.50ISO/TC 29/SC 9
ISO 5413:1993
Machine tools -- Positive drive of Morse tapers
90.93 25.060.20ISO/TC 29/SC 2
ISO 5414-1:2002
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 1: Dimensions of the driving system of tool shanks
90.93 25.060.20ISO/TC 29/SC 2
ISO 5414-2:2002
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 2: Connecting dimensions of chucks and designation
90.93 25.060.20ISO/TC 29/SC 2
ISO 5415:2007
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
90.93 25.060.20ISO/TC 29/SC 2
ISO 5419:1982
Twist drills -- Terms, definitions and types
90.93 25.100.30
01.040.25
ISO/TC 29/SC 9
ISO 5419:1982/Cor 1:1996
60.60 25.100.30
01.040.25
ISO/TC 29/SC 2
ISO 5420:1983
Reamers -- Terms, definitions and types
90.93 25.100.30
01.040.25
ISO/TC 29/SC 9
ISO 5421:1977
Ground high speed steel tool bits
90.93 25.100.10ISO/TC 29/SC 9
ISO 5429:2012
Coated abrasives -- Flap wheels with incorporated flanges or separate flanges
60.60 25.100.70ISO/TC 29/SC 5
ISO 5468:2006
Rotary and rotary impact masonry drill bits with hardmetal tips -- Dimensions
90.93 25.100.30ISO/TC 29/SC 9
ISO 5608:2012
Turning and copying tool holders and cartridges for indexable inserts -- Designation
60.60 25.100.10ISO/TC 29/SC 9
ISO 5609-1:2012
Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 1: Designation, styles, dimensions and calculation for corrections
60.60 25.100.10ISO/TC 29/SC 9
ISO 5609-2:2012
Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 2: Style F
60.60 25.100.10ISO/TC 29/SC 9
ISO 5609-3:2012
Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 3: Style K
60.60 25.100.10ISO/TC 29/SC 9
ISO 5609-4:2012
Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 4: Style L
60.60 25.100.10ISO/TC 29/SC 9
ISO 5609-5:2012
Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 5: Style U
60.60 25.100.10ISO/TC 29/SC 9
ISO 5609-6:2012
Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 6: Style Q
60.60 25.100.10ISO/TC 29/SC 9
ISO 5610-1:2014
Tool holders with rectangular shank for indexable inserts -- Part 1: General survey, correlation and determination of dimensions
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-2:2014
Tool holders with rectangular shank for indexable inserts -- Part 2: Style A
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-3:2014
Tool holders with rectangular shank for indexable inserts -- Part 3: Style B
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-4:2014
Tool holders with rectangular shank for indexable inserts -- Part 4: Style D
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-5:2014
Tool holders with rectangular shank for indexable inserts -- Part 5: Style F
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-6:2014
Tool holders with rectangular shank for indexable inserts -- Part 6: Style G
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-7:2014
Tool holders with rectangular shank for indexable inserts -- Part 7: Style J
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-8:2014
Tool holders with rectangular shank for indexable inserts -- Part 8: Style K
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-9:2014
Tool holders with rectangular shank for indexable inserts -- Part 9: Style L
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-10:2014
Tool holders with rectangular shank for indexable inserts -- Part 10: Style N
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-11:2014
Tool holders with rectangular shank for indexable inserts -- Part 11: Style R
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-12:2014
Tool holders with rectangular shank for indexable inserts -- Part 12: Style S
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-13:2014
Tool holders with rectangular shank for indexable inserts -- Part 13: Style T
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-14:2014
Tool holders with rectangular shank for indexable inserts -- Part 14: Style H
60.60 25.100.01ISO/TC 29/SC 9
ISO 5610-15:2014
Tool holders with rectangular shank for indexable inserts -- Part 15: Style V
60.60 25.100.01ISO/TC 29/SC 9
ISO 5611:1995
Cartridges, type A, for indexable inserts -- Dimensions
90.92 25.100.01ISO/TC 29/SC 9
ISO 5742:2004
Pliers and nippers -- Nomenclature
90.93 01.040.25
25.140.30
ISO/TC 29/SC 10
ISO 5743:2004
Pliers and nippers -- General technical requirements
90.93 25.140.30ISO/TC 29/SC 10
ISO 5744:2004
Pliers and nippers -- Methods of test
90.93 25.140.30ISO/TC 29/SC 10
ISO 5745:2004
Pliers and nippers -- Pliers for gripping and manipulating -- Dimensions and test values
90.93 25.140.30ISO/TC 29/SC 10
ISO 5746:2004
Pliers and nippers -- Engineer's and "Lineman's" pliers -- Dimensions and test values
90.93 25.140.30ISO/TC 29/SC 10
ISO 5747:1995
Pliers and nippers -- Lever assisted side cutting pliers, end and diagonal cutting nippers -- Dimensions and test values
90.93 25.140.30ISO/TC 29/SC 10
ISO 5748:2004
Pliers and nippers -- End cutting nippers -- Dimensions and test values
90.93 25.140.30ISO/TC 29/SC 10
ISO 5749:2004
Pliers and nippers -- Diagonal cutting nippers -- Dimensions and test values
90.93 25.140.30ISO/TC 29/SC 10
ISO 5967:1981
Taps and thread cutting -- Nomenclature of the main types and terminology
90.93 01.040.25
25.100.50
ISO/TC 29/SC 9
ISO 5968:1981
Circular screwing dies -- Terminology
90.93 25.100.50
01.040.25
ISO/TC 29/SC 9
ISO 5969:1979
Ground thread taps for pipe threads G series and Rp series -- Tolerances on the threaded portion
90.93 25.100.50ISO/TC 29/SC 9
ISO 5969:1979/Cor 1:1991
60.60 25.100.50ISO/TC 29/SC 2
ISO 6103:2005
Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static testing
90.92 25.100.70ISO/TC 29/SC 5
ISO 6104:2005
Superabrasive products -- Rotating grinding tools with diamond or cubic boron nitride -- General survey, designation and multilingual nomenclature
90.93 25.100.70ISO/TC 29/SC 5
ISO 6106:2013
Abrasive products -- Checking the grain size of superabrasives
60.60 25.100.70ISO/TC 29/SC 5
ISO 6108:1978
Double equal angle cutters with plain bore and key drive
90.93 25.100.20ISO/TC 29/SC 9
ISO 6262-1:2013
End mills with indexable inserts -- Part 1: End mills with flatted cylindrical shank
60.60 25.100.20ISO/TC 29/SC 9
ISO 6262-2:2013
End mills with indexable inserts -- Part 2: End mills with Morse taper shank
60.60 25.100.20ISO/TC 29/SC 9
ISO 6344-1:1998
Coated abrasives -- Grain size analysis -- Part 1: Grain size distribution test
90.60 25.100.70ISO/TC 29/SC 5
ISO 6344-2:1998
Coated abrasives -- Grain size analysis -- Part 2: Determination of grain size distribution of macrogrits P12 to P220
90.60 25.100.70ISO/TC 29/SC 5
ISO 6344-3:2013
Coated abrasives -- Grain size analysis -- Part 3: Determination of grain size distribution of microgrits P240 to P2500
60.60 25.100.70ISO/TC 29/SC 5
ISO 6462:2011
Face and shoulder milling cutters with indexable inserts -- Dimensions
60.60 25.100.20ISO/TC 29/SC 9
ISO 6751:2011
Tools for moulding -- Ejector pins with cylindrical head
60.60 25.120.30ISO/TC 29/SC 8
ISO 6752:2008
Tools for pressing -- Round punches with 60 degrees conical head and straight shank
90.93 25.120.10ISO/TC 29/SC 8
ISO 6753-1:2005
Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools
90.93 25.120.10ISO/TC 29/SC 8
ISO 6753-2:1998
Tools for pressing and moulding -- Machined plates -- Part 2: Machined plates for moulds
90.93 25.120.30ISO/TC 29/SC 8
ISO 6787:2001
Assembly tools for screws and nuts -- Adjustable wrenches
90.93 25.140.30ISO/TC 29/SC 10
ISO 6788:1997
Assembly tools for screws and nuts -- Four-way socket wrenches -- Dimensions and torque test
90.93 25.140.30ISO/TC 29/SC 10
ISO 6789:2003
Assembly tools for screws and nuts -- Hand torque tools -- Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
90.92 25.140.30ISO/TC 29/SC 10
ISO 6986:2013
Side and face milling (slotting) cutters with indexable inserts -- Dimensions
60.60 25.100.20ISO/TC 29/SC 9
ISO 6987:2012
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions
60.60 25.100.01ISO/TC 29/SC 9
ISO 7079:1981
Core drills with parallel shanks and with Morse taper shanks
90.92 25.100.30ISO/TC 29/SC 9
ISO 7226:1988
Hexagonal dienuts
90.93 25.100.50ISO/TC 29/SC 9
ISO 7294:1983
Saw teeth for woodworking saws -- Profile shape -- Terminology and designation
90.93 01.040.79
79.120.20
ISO/TC 29/SC 9
ISO 7388-1:2007
Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
90.93 25.060.20ISO/TC 29/SC 9
ISO 7388-2:2007
Tool shanks with 7/24 taper for automatic tool changers -- Part 2: Dimensions and designation of shanks of forms J, JD and JF
90.93 25.060.20ISO/TC 29/SC 9
ISO 7388-3:2013
Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
60.60 25.060.20ISO/TC 29
ISO 7738:2001
Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of heads
90.92 25.140.30ISO/TC 29/SC 10
ISO 7755-1:2013
Hardmetal burrs -- Part 1: General specifications
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-2:2013
Hardmetal burrs -- Part 2: Cylindrical burrs (style A)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-3:2013
Hardmetal burrs -- Part 3: Cylindrical round- (ball-) nose burrs (style C)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-4:2013
Hardmetal burrs -- Part 4: Spherical burrs (style D)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-5:2013
Hardmetal burrs -- Part 5: Oval burrs (style E)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-6:2013
Hardmetal burrs -- Part 6: Arch round- (ball-) nose burrs (style F)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-7:2013
Hardmetal burrs -- Part 7: Arch pointed-nose burrs (style G)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-8:2013
Hardmetal burrs -- Part 8: Flame burrs (style H)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-9:2013
Hardmetal burrs -- Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-10:2013
Hardmetal burrs -- Part 10: Conical round- (ball-) nose burrs (style L)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-11:2013
Hardmetal burrs -- Part 11: Conical pointed-nose burrs (style M)
60.60 25.100.20ISO/TC 29/SC 9
ISO 7755-12:2013
Hardmetal burrs -- Part 12: Inverted cone burrs (style N)
60.60 25.100.20ISO/TC 29/SC 9
ISO 8017:2007
Tools for moulding -- Guide pillars, straight and shouldered, and locating guide pillars, shouldered
90.93 25.120.30ISO/TC 29/SC 8
ISO 8018:2007
Tools for moulding -- Guide bushes, headed, and locating guide bushes, headed
90.93 25.120.30ISO/TC 29/SC 8
ISO 8020:2002
Tools for pressing -- Punches with cylindrical head and straight or reduced shank
90.93 25.120.10ISO/TC 29/SC 8
ISO 8051:1999
Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess
90.92 25.100.50ISO/TC 29/SC 9
ISO 8404:2013
Tools for moulding -- Angle pins
60.60 25.120.30ISO/TC 29/SC 8
ISO 8405:2013
Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes
60.60 25.120.30ISO/TC 29/SC 8
ISO 8406:2008
Tools for moulding -- Mould bases -- Round locating elements and spacers
90.93 25.120.30ISO/TC 29/SC 8
ISO 8486-1:1996
Bonded abrasives -- Determination and designation of grain size distribution -- Part 1: Macrogrits F4 to F220
90.93 25.100.70ISO/TC 29/SC 5
ISO 8486-2:2007
Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits F230 to F2000
90.93 25.100.70ISO/TC 29/SC 5
ISO 8688-1:1989
Tool life testing in milling -- Part 1: Face milling
90.93 25.100.20ISO/TC 29/SC 9
ISO 8688-2:1989
Tool life testing in milling -- Part 2: End milling
90.93 25.100.20ISO/TC 29/SC 9
ISO 8693:2011
Tools for moulding -- Flat ejector pins
60.60 25.120.30ISO/TC 29/SC 8
ISO 8694:2011
Tools for moulding -- Shouldered ejector pins
60.60 25.120.30ISO/TC 29/SC 8
ISO 8695:2010
Tools for pressing -- Punches -- Nomenclature and terminology
60.60 25.120.10
01.040.25
ISO/TC 29/SC 8
ISO 8764-1:2004
Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 1: Driver tips
90.93 25.140.30ISO/TC 29/SC 10
ISO 8764-2:2004
Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
90.93 25.140.30ISO/TC 29/SC 10
ISO 8830:1991
High-speed steel machine taps with ground threads -- Technical specifications
90.93 25.100.50ISO/TC 29/SC 9
ISO 8976:2004
Pliers and nippers -- Multiple slip joint pliers -- Dimensions and test values
90.93 25.140.30ISO/TC 29/SC 10
ISO 8977:2003
Tools for pressing -- Matrixes
90.93 25.120.10ISO/TC 29/SC 8
ISO 8979:2004
Pliers and nippers for electronics -- Nomenclature
90.93 25.140.30
01.040.25
ISO/TC 29/SC 10
ISO 9136-1:2004
Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits
90.93 25.100.70ISO/TC 29/SC 5
ISO 9136-2:1999
Abrasive grains -- Determination of bulk density -- Part 2: Microgrits
90.93 25.100.70ISO/TC 29/SC 5
ISO 9138:1993
Abrasive grains -- Sampling and splitting
90.92 25.100.70ISO/TC 29/SC 5
ISO 9181:2007
Tools for pressing -- Round punches with 60 degrees conical head and reduced shank
90.93 25.120.10ISO/TC 29/SC 8
ISO 9182-1:2013
Tools for pressing -- Guide pillars -- Part 1: Types
60.60 25.120.10ISO/TC 29/SC 8
ISO 9182-2:2013
Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars
60.60 25.120.10ISO/TC 29/SC 8
ISO 9182-3:2013
Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
60.60 25.120.10ISO/TC 29/SC 8
ISO 9182-4:2013
Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
60.60 25.120.10ISO/TC 29/SC 8
ISO 9182-5:2013
Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
60.60 25.120.10ISO/TC 29/SC 8
ISO 9183-1:2008
Tools for pressing -- Wear plates for press dies -- Part 1: Type A
90.93 25.120.10ISO/TC 29/SC 8
ISO 9183-2:2011
Tools for pressing -- Wear plates for press dies -- Part 2: Type B
60.60 25.120.10ISO/TC 29/SC 8
ISO 9242:1988
Pliers and nippers -- Construction worker's pincers -- Dimensions and test values
90.60 25.140.30ISO/TC 29/SC 10
ISO 9243:1988
Pliers and nippers -- Carpenter's pincers -- Dimensions and test values
90.60 25.140.30ISO/TC 29/SC 10
ISO 9270-1:2010
7/24 taper spindle noses for automatic tool changers -- Part 1: Dimensions and designation of spindle noses of forms S and SF
60.60 25.060.20ISO/TC 29/SC 2
ISO 9270-2:2010
7/24 taper spindle noses for automatic tool changers -- Part 2: Dimensions and designation of spindle noses of forms J and JF
60.60 25.060.20ISO/TC 29/SC 2
ISO 9284:2013
Abrasive grains -- Test-sieving machines
60.60 19.120
25.100.70
ISO/TC 29/SC 5
ISO 9285:1997
Abrasive grains and crude -- Chemical analysis of fused aluminium oxide
90.93 25.100.70ISO/TC 29/SC 5
ISO 9286:1997
Abrasive grains and crude -- Chemical analysis of silicon carbide
90.93 25.100.70ISO/TC 29/SC 5
ISO 9343:2004
Pliers and nippers -- Slip joint pliers -- Dimensions and test values
90.93 25.140.30ISO/TC 29/SC 10
ISO 9361-1:2014
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1: Dimensions of inserts without fixing hole
60.60 25.100.01ISO/TC 29/SC 9
ISO 9361-2:2011
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2: Dimensions of inserts with cylindrical fixing hole
60.60 25.100.01ISO/TC 29/SC 9
ISO 9448-1:2013
Tools for pressing -- Guide bushes -- Part 1: Forms
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-2:2013
Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-3:2013
Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-4:2013
Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-5:2013
Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-6:2013
Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-7:2013
Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-8:2013
Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-9:2013
Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-10:2013
Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2
60.60 25.120.10ISO/TC 29/SC 8
ISO 9448-11:2013
Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2
60.60 25.120.10ISO/TC 29/SC 8
ISO 9449:2007
Tools for moulding -- Centring sleeves
90.93 25.120.30ISO/TC 29/SC 8
ISO 9524:1993
Machine tools -- Front faces of spindle holders for machining centres -- Functional dimensions
90.93 25.040.10ISO/TC 29/SC 2
ISO 9654:2004
Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippers
90.93 25.140.30ISO/TC 29/SC 10
ISO 9655:2004
Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulating
90.93 25.140.30ISO/TC 29/SC 10
ISO 9656:2004
Pliers and nippers for electronics -- Test methods
90.93 25.140.30ISO/TC 29/SC 10
ISO 9657:2004
Pliers and nippers for electronics -- General technical requirements
90.93 25.140.30ISO/TC 29/SC 10
ISO 9766:2012
Drills with indexable inserts -- Cylindrical shanks with a parallel flat
60.60 25.100.30ISO/TC 29/SC 9
ISO 10069-1:2008
Tools for pressing -- Elastomer pressure springs -- Part 1: General specification
90.93 25.120.10ISO/TC 29/SC 8
ISO 10069-2:2008
Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories
90.93 25.120.10ISO/TC 29/SC 8
ISO 10071-1:2008
Tools for pressing -- Ball-lock punches -- Part 1: Ball-lock punches for light duty
90.93 25.120.10ISO/TC 29/SC 8
ISO 10071-2:2005
Tools for pressing -- Ball-lock punches -- Part 2: Ball-lock punches for heavy duty
90.93 25.120.10ISO/TC 29/SC 8
ISO 10072:2004
Tools for moulding -- Sprue bushes -- Dimensions
90.93 25.120.30ISO/TC 29/SC 8
ISO 10073:2008
Tools for moulding -- Support pillars
90.93 25.120.30ISO/TC 29/SC 8
ISO 10102:2001
Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Length of wrenches and thickness of the heads
90.93 25.140.30ISO/TC 29/SC 10
ISO 10103:2001
Assembly tools for screws and nuts -- Double-headed, flat and offset, box wrenches -- Length of wrenches and thickness of the heads
90.93 25.140.30ISO/TC 29/SC 10
ISO 10104:2001
Assembly tools for screws and nuts -- Double-headed, deep offset and modified offset, box wrenches -- Length of wrenches and thickness of the heads
90.93 25.140.30ISO/TC 29/SC 10
ISO 10145-1:1993
End mills with brazed helical hardmetal tips -- Part 1: Dimensions of end mills with parallel shank
90.20 25.100.20ISO/TC 29/SC 9
ISO 10145-2:1993
End mills with brazed helical hardmetal tips -- Part 2: Dimensions of end mills with 7/24 taper shank
90.20 25.100.20ISO/TC 29/SC 9
ISO 10242-1:2011
Tools for pressing -- Punch holder shanks -- Part 1: Type A
60.60 25.120.10ISO/TC 29/SC 8
ISO 10242-2:2008
Tools for pressing -- Punch holder shanks -- Part 2: Type C
90.93 25.120.10ISO/TC 29/SC 8
ISO 10242-3:2008
Tools for pressing -- Punch holder shanks -- Part 3: Type D
90.93 25.120.10ISO/TC 29/SC 8
ISO 10243:2010
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
60.60 25.120.10
01.070
ISO/TC 29/SC 8
ISO 10243:2010/Amd 1:2011
60.60 25.120.10
01.070
ISO/TC 29/SC 8
ISO 10643:2009
Dimensions of accessories for cutter arbors with parallel key and tenon drive
90.20 25.100.01ISO/TC 29/SC 2
ISO 10649-1:2013
Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions
60.60 25.060.20ISO/TC 29/SC 2
ISO 10649-2:2013
Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
60.60 25.060.20ISO/TC 29/SC 2
ISO 10649-3:2013
Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
60.60 25.060.20ISO/TC 29/SC 2
ISO 10649-4:2013
Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
60.60 25.060.20ISO/TC 29/SC 2
ISO 10649-5:2012
Cutter arbors with parallel key and tenon drive -- Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
60.60 25.060.20ISO/TC 29/SC 2
ISO 10649-6:2012
Cutter arbors with parallel key and tenon drive -- Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
60.60 25.060.20ISO/TC 29/SC 2
ISO 10887:1999
Key type three-jaw drill chucks -- Specification
90.93 25.100.30ISO/TC 29/SC 2
ISO 10888:1999
Keyless type three-jaw drill chucks -- Specification
90.93 25.100.30ISO/TC 29/SC 2
ISO 10889-1:2004
Tool holders with cylindrical shank -- Part 1: Cylindrical shank, location bore -- Technical delivery conditions
90.60 25.060.20ISO/TC 29/SC 2
ISO 10889-2:2004
Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special designs
90.60 25.060.20ISO/TC 29/SC 2
ISO 10889-3:2004
Tool holders with cylindrical shank -- Part 3: Type B with rectangular radial seat
90.60 25.060.20ISO/TC 29/SC 2
ISO 10889-4:2004
Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat
90.60 25.060.20ISO/TC 29/SC 2
ISO 10889-5:1997
Tool holders with cylindrical shank -- Part 5: Type D with more than one rectangular seat
90.92 25.060.20ISO/TC 29/SC 2
ISO 10889-6:2004
Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat
90.60 25.060.20ISO/TC 29/SC 2
ISO 10889-7:2004
Tool holders with cylindrical shank -- Part 7: Type F with taper seat
90.60 25.060.20ISO/TC 29/SC 2
ISO 10889-8:1997
Tool holders with cylindrical shank -- Part 8: Type Z, accessories
90.60 25.060.20ISO/TC 29/SC 2
ISO 10897:1996
Collets for tool holders with taper ratio 1:10 -- Collets, hoders,nuts
90.92 25.060.20ISO/TC 29/SC 2
ISO 10898:1992
Spot drills
90.92 25.100.30ISO/TC 29/SC 9
ISO 10899:1996
High-speed steel two-flute twist drills -- Technical specifications
90.93 25.100.30ISO/TC 29/SC 9
ISO 10907-1:2008
Tools for moulding -- Locating rings -- Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
90.93 25.120.30ISO/TC 29/SC 8
ISO 10907-2:2007
Tools for moulding -- Locating rings -- Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
90.93 25.120.30ISO/TC 29/SC 8
ISO 10910:1995
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
90.93 25.100.01ISO/TC 29/SC 9
ISO 10911:2010
Solid hardmetal end mills with cylindrical shank -- Dimensions
60.60 25.100.20ISO/TC 29/SC 9
ISO 10914:1996
Assembly tools for screws and nuts -- Sockets and wrenches for spline drive
90.93 25.140.01ISO/TC 29/SC 10
ISO 11054:2006
Cutting tools -- Designation of high-speed steel groups
90.93 25.100.01
77.140.35
ISO/TC 29
ISO 11168:1995
Socket wrenches for spark- and glow-plugs
90.93 25.140.01ISO/TC 29/SC 10
ISO 11415:1997
Tools for pressing -- Die sets
90.93 25.120.10ISO/TC 29/SC 8
ISO 11529:2013
Milling cutters -- Designation -- Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
60.60 25.100.20ISO/TC 29/SC 9
ISO 11900-1:2007
Tools for pressing -- Ball-lock punch retainers -- Part 1: Types A and B, rectangular and square for light duty
90.93 25.120.10ISO/TC 29/SC 8
ISO 11900-2:2008
Tools for pressing -- Ball-lock punch retainers -- Part 2: Types C and D, reduced for light duty
90.93 25.120.10ISO/TC 29/SC 8
ISO 11900-3:2004
Tools for pressing -- Ball-lock punch retainers -- Part 3: Type E, reduced for heavy duty
90.93 25.120.10ISO/TC 29/SC 8
ISO 11901-1:2003
Tools for pressing -- Gas springs -- Part 1: General specifications
90.93 25.120.10ISO/TC 29/SC 8
ISO 11901-2:2004
Tools for pressing -- Gas springs -- Part 2: Specification of accessories
90.60 25.120.10ISO/TC 29/SC 8
ISO 11901-3:2014
Tools for pressing -- Gas springs -- Part 3: Gas spring with increased spring force and compact built height
60.60 25.120.10ISO/TC 29/SC 8
ISO 11901-4:2014
Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring force and same built height
60.60 25.120.10ISO/TC 29/SC 8
ISO 11903:2008
Tools for pressing -- Guide pillar mountings
90.93 25.120.10ISO/TC 29/SC 8
ISO 12164-1:2001
Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions
90.93 25.060.20ISO/TC 29/SC 2
ISO 12164-2:2001
Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions
90.93 25.060.20ISO/TC 29/SC 2
ISO 12164-3:2008
Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools
90.92 25.060.20ISO/TC 29/SC 2
ISO 12164-4:2008
Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools
90.92 25.060.20ISO/TC 29/SC 2
ISO 12165:2000
Tools for moulding -- Components of compression and injection moulds and diecasting dies -- Terms and symbols
90.93 01.040.25
25.120.30
ISO/TC 29/SC 8
ISO 12197:1996
Woodruff keaseat cutters -- Dimensions
90.92 25.100.20ISO/TC 29/SC 9
ISO 13399-1:2006
Cutting tool data representation and exchange -- Part 1: Overview, fundamental principles and general information model
90.93 35.240.50
25.100.01
ISO/TC 29
ISO 13399-1:2006/Cor 1:2008
60.60 25.100.01
35.240.50
ISO/TC 29
ISO 13399-1:2006/Amd 1:2010
60.60 25.100.01
35.240.50
ISO/TC 29
ISO 13399-1:2006/Cor 2:2011
60.60 25.100.01
35.240.50
ISO/TC 29
ISO/TS 13399-2:2014
Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-2:2005/Cor 1:2011
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-3:2014
Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-3:2007/Cor 1:2011
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-4:2014
Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive items
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-4:2007/Cor 1:2011
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-5:2014
Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-5:2007/Cor 1:2011
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-50:2013
Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-50:2007/Cor 1:2011
60.60 35.240.50
25.100.01
ISO/TC 29
ISO/TS 13399-60:2014
Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems
60.60 25.100.01
35.240.50
ISO/TC 29
ISO/TS 13399-80:2014
Cutting tool data representation and exchange -- Part 80: Creation and exchange of 3D models -- Overview and principles
60.60 25.100.01
35.240.50
ISO/TC 29
ISO/TS 13399-100:2008
Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods for reference dictionaries
90.92 25.100.01
35.240.50
ISO/TC 29
ISO/TS 13399-100:2008/Cor 1:2011
60.60 25.100.01
35.240.50
ISO/TC 29
ISO/TS 13399-150:2008
Cutting tool data representation and exchange -- Part 150: Usage guidelines
90.93 25.100.01
35.240.50
ISO/TC 29
ISO/TS 13399-201:2014
Cutting tool data representation and exchange -- Part 201: Creation and exchange of 3D models -- Regular inserts
60.60 25.100.01
35.240.50
ISO/TC 29
ISO/TS 13399-301:2013
Cutting tool data representation and exchange -- Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
60.60 25.100.01
35.240.50
ISO/TC 29
ISO/TS 13399-302:2013
Cutting tool data representation and exchange -- Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
60.60 25.100.01
35.240.50
ISO/TC 29
ISO 13942:2000
Bonded abrasive products -- Limit deviations and run-out tolerances
90.92 25.100.70ISO/TC 29/SC 5
ISO 15488:2003
Collets with 8 degree setting angle for tool shanks -- Collets, nuts and fitting dimensions
90.60 25.060.20ISO/TC 29/SC 2
ISO 15600:2000
Tools for moulding -- Thermal insulating sheets for injection moulds
90.93 25.120.30ISO/TC 29/SC 8
ISO 15601:2000
Hammers -- Technical specifications concerning steel hammer heads -- Test procedures
90.93 25.140.30ISO/TC 29/SC 10
ISO 15635:2001
Coated abrasives -- Flap discs
90.93 25.100.70ISO/TC 29/SC 5
ISO 15636:2003
Back-up pads for vulcanized fibre discs
90.60 25.100.70ISO/TC 29/SC 5
ISO 15637-1:2002
Holding fixtures of cylindrical abrasive sleeves -- Part 1: Holding fixtures with shank for hand-held grinding machines
90.93 25.100.70ISO/TC 29/SC 5
ISO 15637-2:2002
Holding fixtures of cylindrical abrasive sleeves -- Part 2: Holding fixtures for stationary machines
90.93 25.100.70ISO/TC 29/SC 5
ISO 15641:2001
Milling cutters for high speed machining -- Safety requirements
90.93 25.100.20ISO/TC 29/SC 9
ISO 15917:2012
Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
60.60 25.100.20ISO/TC 29/SC 9
ISO 16057:2002
Coated abrasives -- Vulcanized fibre discs
90.93 25.100.70ISO/TC 29/SC 5
ISO 16366:2008
Tools for pressing -- L-shaped guides
90.93 25.120.10ISO/TC 29/SC 8
ISO 16367:2008
Tools for pressing -- Guide plates -- U- and V-blocks
90.93 25.120.10ISO/TC 29/SC 8
ISO 16462:2014
Cubic boron nitride inserts, tipped or solid -- Dimensions, types
60.60 25.100.01ISO/TC 29/SC 9
ISO 16463:2014
Polycristalline diamond inserts, tipped -- Dimensions, types
60.60 25.100.01ISO/TC 29/SC 9
ISO 16915:2003
Tools for moulding -- Sprue pullers
90.93 25.120.30ISO/TC 29/SC 8
ISO 16916:2004
Tools for moulding -- Tool specification sheet for injection moulds
90.60 25.120.30ISO/TC 29/SC 8
ISO 18084:2011
Press tools for tablets -- Punches and dies
60.60 25.120.10ISO/TC 29/SC 8
ISO 21537-1:2004
Clamping flanges for superabrasive cutting-off wheels -- Part 1: Natural stone
90.93 25.100.70ISO/TC 29/SC 5
ISO 21537-2:2004
Clamping flanges for superabrasive cutting-off wheels -- Part 2: Building and construction
90.93 25.100.70ISO/TC 29/SC 5
ISO 21538:2004
Blanks for superabrasive cutting-off wheels -- Mounting and fixing bores -- Building construction and civil engineering
90.60 25.100.70ISO/TC 29/SC 5
ISO 21948:2001
Coated abrasives -- Plain sheets
90.93 25.100.70ISO/TC 29/SC 5
ISO 21949:2001
Coated abrasives -- Plain sheets with holes for dust extraction
90.93 25.100.70ISO/TC 29/SC 5
ISO 21950:2001
Coated abrasives -- Plain discs
90.93 25.100.70ISO/TC 29/SC 5
ISO 21951:2001
Coated abrasives -- Plain discs with holes for dust extraction
90.93 25.100.70ISO/TC 29/SC 5
ISO 22037:2007
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions
90.93 25.100.20ISO/TC 29/SC 9
ISO 22917:2004
Superabrasives -- Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
90.92 25.100.70ISO/TC 29/SC 5
ISO 23480:2013
Tools for pressing -- Sliding plates
60.60 25.120.10ISO/TC 29/SC 8
ISO 23481:2013
Tools for pressing -- Cam driver plates
60.60 25.120.10ISO/TC 29/SC 8
ISO 24233:2008
Tools for moulding -- Tool specification sheet for diecasting dies
90.93 25.120.30ISO/TC 29/SC 8
ISO/TR 24857:2006
Synthetic industrial diamond grit products -- Single-particle compressive failure strength -- "DiaTest-SI" system
90.93 25.100.70ISO/TC 29/SC 5
ISO 26622-1:2008
Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks
90.92 25.060.20ISO/TC 29/SC 2
ISO 26622-2:2008
Modular taper interface with ball track system -- Part 2: Dimensions and designation of receivers
90.93 25.060.20ISO/TC 29/SC 2
ISO 26623-1:2014
Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks
60.60 25.060.20ISO/TC 29
ISO 26623-2:2014
Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers
60.60 25.060.20ISO/TC 29
ISO 28238:2010
Compression and injection moulds -- Components for gating systems
60.60 01.040.25
25.120.30
ISO/TC 29/SC 8