Home

Standards catalogue

Subscribe to updates

ISO/TC 29  - Small tools

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 29 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 494
Cylindrical shank twist drills -- Long series
60.00 25.100.30ISO/TC 29/SC 9
ISO 529
Short machine taps and hand taps
60.00 25.100.50ISO/TC 29/SC 9
ISO/DIS 1703
Assembly tools for screws and nuts -- Nomenclature
40.00 01.040.25
25.140.01
ISO/TC 29/SC 10
ISO 1832
Indexable inserts for cutting tools -- Designation
60.00 25.100.01ISO/TC 29/SC 9
ISO 2284
Hand taps for parallel and taper pipe threads -- General dimensions and marking
60.00 25.100.50ISO/TC 29/SC 9
ISO/PRF 2725-1
Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated sockets
50.20 25.140.30ISO/TC 29/SC 10
ISO/PRF 2725-2
Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact")
50.20 25.140.01ISO/TC 29/SC 10
ISO/PRF 2725-3
Assembly tools for screws and nuts -- Square drive sockets -- Part 3: Machine-operated sockets ("non-impact")
50.20 25.140.01ISO/TC 29/SC 10
ISO/FDIS 3364
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions
50.00 25.100.01ISO/TC 29/SC 9
ISO 4229
Assembly tools for screws and nuts -- Single-head engineer's wrenches for lower torque applications -- Maximum outside dimensions of heads and test torques
60.00 25.140.30ISO/TC 29/SC 10
ISO 5468
Rotary and rotary impact masonry drill bits with hardmetal tips -- Dimensions
60.00 25.100.30ISO/TC 29/SC 9
ISO/CD 6787
Assembly tools for screws and nuts -- Adjustable wrenches
30.60 25.140.30ISO/TC 29/SC 10
ISO 6789-1
Assembly tools for screws and nuts -- Hand torque tools -- Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
60.00 25.140.30ISO/TC 29/SC 10
ISO 6789-2
Assembly tools for screws and nuts -- Hand torque tools -- Part 2: Requirements for calibration and determination of measurement uncertainty
60.00 25.140.30ISO/TC 29/SC 10
ISO/CD 10102
Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Length of wrenches and thickness of the heads
30.60 25.140.30ISO/TC 29/SC 10
ISO/CD 10103
Assembly tools for screws and nuts -- Double-headed, flat and offset, box wrenches -- Length of wrenches and thickness of the heads
30.60 25.140.30ISO/TC 29/SC 10
ISO/CD 10104
Assembly tools for screws and nuts -- Double-headed, deep offset and modified offset, box wrenches -- Length of wrenches and thickness of the heads
30.60 25.140.30ISO/TC 29/SC 10
ISO/NP 10243
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
10.99 25.120.10
01.070
ISO/TC 29/SC 8
ISO/DIS 10911
Solid hardmetal end mills with cylindrical shank -- Dimensions
40.60 25.100.20ISO/TC 29/SC 9
ISO/PRF TS 13399-80
Cutting tool data representation and exchange -- Part 80: Creation and exchange of 3D models -- Overview and principles
50.00 25.100.01
35.240.50
ISO/TC 29
ISO/CD TS 13399-306
Cutting tool data representation and exchange -- Part 306: Creation and exchange of 3D models -- Drills and countersinking tools for indexable inserts
30.00 25.100.01
35.240.50
ISO/TC 29
ISO/AWI TS 13399-313
Cutting tool data representation and exchange -- Part 313: Creation and exchange of 3D models -- Burrs
20.00ISO/TC 29
ISO/AWI TS 13399-314
Cutting tool data representation and exchange -- Part 314: Creation and exchange of 3D models - Cartridges for indexable inserts
20.00ISO/TC 29
ISO/DTS 13399-315
Cutting tool data representation and exchange -- Part 315: Creation and exchange of 3D models - Modelling of machine operated feed out tools
30.99 25.100.01
35.240.50
ISO/TC 29
ISO/CD TS 13399-403
Cutting tool data representation and exchange -- Part 403: Creation and exchange of 3D models -- Modelling of driven tool units
30.00 25.100.01
35.240.50
ISO/TC 29
ISO/CD TS 13399-406
Cutting tool data representation and exchange -- Part 406: Creation and exchange of 3D models -- Modelling of connection interface
30.00 25.100.01
35.240.50
ISO/TC 29
ISO/NP 13942
Bonded abrasive products -- Limit deviations and run-out tolerances
10.99 25.100.70ISO/TC 29/SC 5
ISO/DIS 15488
Collets with 8 degree setting angle for tool shanks -- Collets, nuts and fitting dimensions
40.99 25.060.20ISO/TC 29/SC 2
ISO/FDIS 16084
Balancing of rotating tools and tool systems
50.00 21.120.40
25.100.01
ISO/TC 29
ISO/CD 20928
Tools for pressing -- Spring plungers with helical compression steel spring or nitrogen gas spring
30.00 25.120.10ISO/TC 29/SC 8
ISO/CD 20929
Tools for pressing -- Heel guidings in large stamping and forming dies
30.00 25.120.10ISO/TC 29/SC 8
ISO/NP 21982
Assembly tools for screws and nuts -- Ratcheting wrench
10.99ISO/TC 29/SC 10
ISO/PRF 26622-1
Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks
50.20 25.060.20ISO/TC 29