Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO/R 789:1968 Withdrawal of ISO/R 789-1968 | 95.99 | 65.060.10 |
| ISO 789-1:1990 Agricultural tractors -- Test procedures -- Part 1: Power tests for power take-off | 90.93 | 65.060.10 |
| ISO 789-1:1981 Agricultural tractors -- Test procedures -- Part 1: Power tests | 95.99 | 65.060.10 |
| ISO 789-2:1993 Agricultural tractors -- Test procedures -- Part 2: Rear three-point linkage lifting capacity | 90.92 | 65.060.10 |
| ISO 789-2:1983 Agricultural tractors -- Test procedures -- Part 2: Hydraulic power and lifting capacity | 95.99 | 65.060.10 |
| ISO/AWI 789-3 Agricultural tractors -- Test procedures -- Part 3: Turning and clearance diameters | 20.00 | 65.060.10 |
| ISO 789-3:1993 Agricultural tractors -- Test procedures -- Part 3: Turning and clearance diameters | 90.92 | 65.060.10 |
| ISO 789-3:1982 Agricultural tractors -- Test procedures -- Part 3: Turning and clearance diameters | 95.99 | 65.060.10 |
| ISO 789-4:1982 Agricultural tractors -- Test procedures -- Part 4: Measurement of exhaust smoke | 95.99 | 65.060.10 |
| ISO 789-4:1986 Agricultural tractors -- Test procedures -- Part 4: Measurement of exhaust smoke | 90.93 | 65.060.10 13.040.50 |
| ISO 789-5:1983 Agricultural tractors -- Test procedures -- Part 5: Partial power PTO -- Non-mechanically transmitted power | 90.93 | 65.060.10 |
| ISO 789-6:1982 Agricultural tractors -- Test procedures -- Part 6: Centre of gravity | 90.93 | 65.060.10 |
| ISO 789-6:1982/Amd 1:1996 | 60.60 | 65.060.10 |
| ISO 789-7:1991 Agricultural tractors -- Test procedures -- Part 7: Axle power determination | 90.93 | 65.060.10 |
| ISO 789-8:1991 Agricultural tractors -- Test procedures -- Part 8: Engine air cleaner | 90.93 | 65.060.10 |
| ISO 789-9:1990 Agricultural tractors -- Test procedures -- Part 9: Power tests for drawbar | 90.92 | 65.060.10 |
| ISO 789-9:1990/Amd 1:1993 | 60.60 | 65.060.10 |
| ISO 789-10:1996 Agricultural tractors -- Test procedures -- Part 10: Hydraulic power at tractor/implement interface | 95.99 | 65.060.10 |
| ISO/OECD 789-10:2006 Agricultural tractors -- Test procedures -- Part 10: Hydraulic power at tractor/implement interface | 90.93 | 65.060.10 |
| ISO 789-11:1996 Agricultural tractors -- Test procedures -- Part 11: Steering capability of wheeled tractors | 90.93 | 65.060.10 |
| ISO 789-12:2000 Agricultural tractors -- Test procedures -- Part 12: Low temperature starting | 90.92 | 65.060.10 |
| ISO 2288:1979 Agricultural tractors and machines -- Engine test code (bench test) -- Net power | 95.99 | 65.060.01 |
| ISO 2288:1997 Agricultural tractors and machines -- Engine test code -- Net power | 95.99 | 65.060.01 |
| ISO 2288:1989 Agricultural tractors and machines -- Engine test code (bench test) -- Net power | 95.99 | 65.060.01 |
| ISO 2288:1979/Amd 1:1983 | 95.99 | 65.060.01 |
| ISO 3463:2006 Tractors for agriculture and forestry -- Roll-over protective structures (ROPS) -- Dynamic test method and acceptance conditions | 90.93 | 65.060.10 65.060.80 |
| ISO 3737:1976 Agricultural tractors and self-propelled machines -- Test method for enclosure pressurization systems | 95.99 | 65.060.01 |
| ISO 3776-2:2013 Tractors and machinery for agriculture -- Seat belts -- Part 2: Anchorage strength requirements | 60.60 | 65.060.10 |
| ISO 3776-2:2007 Tractors and machinery for agriculture -- Seat belts -- Part 2: Anchorage strength requirements | 95.99 | 65.060.10 |
| ISO 3776-3:2009 Tractors and machinery for agriculture -- Seat belts -- Part 3: Requirements for assemblies | 60.60 | 65.060.10 |
| ISO 3965:1990 Agricultural wheeled tractors -- Maximum speeds -- Method of determination | 90.93 | 65.060.10 |
| ISO 3965:1977 Agricultural wheeled tractors -- Determination of maximum travel speed | 95.99 | 65.060.10 |
| ISO 5007:1990 Agricultural wheeled tractors -- Operator's seat -- Laboratory measurement of transmitted vibration | 95.99 | 65.060.10 13.160 |
| ISO 5007:2003 Agricultural wheeled tractors -- Operator's seat -- Laboratory measurement of transmitted vibration | 90.93 | 65.060.10 13.160 |
| ISO 5008:1979 Agricultural wheeled tractors and field machinery -- Measurement of whole-body vibration of the operator | 95.99 | 65.060.01 13.160 |
| ISO 5008:2002 Agricultural wheeled tractors and field machinery -- Measurement of whole-body vibration of the operator | 90.93 | 65.060.01 13.160 |
| ISO 5008:2002/Cor 1:2005 | 60.60 | 65.060.01 13.160 |
| ISO 5131:1996 Acoustics -- Tractors and machinery for agriculture and forestry -- Measurement of noise at the operator's position -- Survey method | 90.93 | 17.140.20 65.060.01 |
| ISO 5674:2004 Tractors and machinery for agriculture and forestry -- Guards for power take-off (PTO) drive-shafts -- Strength and wear tests and acceptance criteria | 90.93 | 65.060.01 |
| ISO 5674:1982 Tractors and machinery for agriculture and forestry -- Guards for power take-off drive shafts -- Test methods | 95.99 | 65.060 |
| ISO 5674-1:1992 Tractors and machinery for agriculture and forestry -- Guards for power take-off (PTO) drive-shafts -- Part 1: Strength test | 95.99 | 65.060.01 |
| ISO 5674-2:1992 Tractors and machinery for agriculture and forestry -- Guards for power take-off (PTO) drive-shafts -- Part 2: Wear test | 95.99 | 65.060.01 |
| ISO 5696:1984 Trailed agricultural vehicles -- Brakes and braking devices -- Laboratory test method | 90.93 | 65.060.10 |
| ISO 5697:1982 Agricultural and forestry vehicles -- Determination of braking performance | 90.93 | 65.060.01 |
| ISO 5700:2013 Tractors for agriculture and forestry -- Roll-over protective structures -- Static test method and acceptance conditions | 60.60 | 65.060.80 65.060.10 |
| ISO 5700:2006 Tractors for agriculture and forestry -- Roll-over protective structures (ROPS) -- Static test method and acceptance conditions | 95.99 | 65.060.10 65.060.80 |
| ISO 6097:1989 Tractors and self-propelled machines for agriculture -- Performance of heating and ventilation systems in closed cabs -- Test method | 95.99 | 65.060.01 |
| ISO 7216:1992 Acoustics -- Agricultural and forestry wheeled tractors and self-propelled machines -- Measurement of noise emitted when in motion | 90.20 | 17.140.20 65.060.01 |
| ISO/TR 8953:1987 Tractors and self-propelled machines for agriculture and forestry-- Test method for performance of air-conditioning system | 95.99 | 65.060.01 |
| ISO 10998:1995 Agricultural wheeled tractors -- Steering requirements | 95.99 | 65.060.10 |
| ISO 12003-1:2008 Agricultural and forestry tractors -- Roll-over protective structures on narrow-track wheeled tractors -- Part 1: Front-mounted ROPS | 90.93 | 65.060.10 |
| ISO 12003-1:2002 Agricultural and forestry tractors -- Narrow-track wheeled tractors -- Part 1: Front-mounted roll-over protective structures | 95.99 | 65.060.10 |
| ISO 12003-2:2002 Agricultural and forestry tractors -- Narrow-track wheeled tractors -- Part 2: Rear-mounted roll-over protective structures | 95.99 | 65.060.10 |
| ISO 12003-2:2008 Agricultural and forestry tractors -- Roll-over protective structures on narrow-track wheeled tractors -- Part 2: Rear-mounted ROPS | 90.93 | 65.060.10 |
| ISO 12368:2001 Agricultural vehicles -- Mechanical hook-type connections on towing vehicles -- Test methods and requirements | 90.93 | 65.060.10 |
| ISO/FDIS 12934 Tractors and machinery for agriculture and forestry -- Basic types -- Vocabulary | 50.00 | 65.060.01 |
| ISO 14269-1:1997 Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 1: Vocabulary | 90.93 | 65.060.01 |
| ISO 14269-2:1997 Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 2: Heating, ventilation and air-conditioning test method and performance | 90.93 | 65.060.01 |
| ISO 14269-3:1997 Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 3: Determination of effect of solar heating | 90.93 | 65.060.01 |
| ISO 14269-4:1997 Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 4: Air filter element test method | 90.93 | 65.060.01 |
| ISO 14269-5:1997 Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 5: Pressurization system test method | 90.93 | 65.060.01 |
| ISO 14982:1998 Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and acceptance criteria | 90.92 | 33.100.01 65.060.01 |
| ISO/WD 14982 Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and acceptance criteria | 20.20 | 33.100.01 65.060.01 |
| ISO 27850:2013 Tractors for agriculture and forestry -- Falling object protective structures -- Test procedures and performance requirements | 60.60 | 65.060.10 |
