Home

Standards catalogue

Subscribe to updates

ISO/TC 23  - Tractors and machinery for agriculture and forestry

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 23 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 500-1:2014
Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
60.60 65.060.10ISO/TC 23/SC 4
ISO 500-2:2004
Agricultural tractors -- Rear-mounted power take-off types 1, 2 and 3 -- Part 2: Narrow-track tractors, dimensions for master shield and clearance zone
90.60 65.060.10ISO/TC 23/SC 4
ISO 500-3:2014
Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part 3: Main PTO dimensions and spline dimensions, location of PTO
60.60 65.060.10ISO/TC 23/SC 4
ISO 730:2009
Agricultural wheeled tractors -- Rear-mounted three-point linkage -- Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
90.20 65.060.10ISO/TC 23/SC 4
ISO 789-1:1990
Agricultural tractors -- Test procedures -- Part 1: Power tests for power take-off
90.92 65.060.10ISO/TC 23/SC 2
ISO 789-2:1993
Agricultural tractors -- Test procedures -- Part 2: Rear three-point linkage lifting capacity
90.92 65.060.10ISO/TC 23/SC 2
ISO 789-3:1993
Agricultural tractors -- Test procedures -- Part 3: Turning and clearance diameters
90.92 65.060.10ISO/TC 23/SC 2
ISO 789-4:1986
Agricultural tractors -- Test procedures -- Part 4: Measurement of exhaust smoke
90.93 65.060.10
13.040.50
ISO/TC 23/SC 2
ISO 789-5:1983
Agricultural tractors -- Test procedures -- Part 5: Partial power PTO -- Non-mechanically transmitted power
90.93 65.060.10ISO/TC 23/SC 2
ISO 789-6:1982
Agricultural tractors -- Test procedures -- Part 6: Centre of gravity
90.93 65.060.10ISO/TC 23/SC 2
ISO 789-6:1982/Amd 1:1996
60.60 65.060.10ISO/TC 23/SC 2
ISO 789-7:1991
Agricultural tractors -- Test procedures -- Part 7: Axle power determination
90.93 65.060.10ISO/TC 23/SC 2
ISO 789-8:1991
Agricultural tractors -- Test procedures -- Part 8: Engine air cleaner
90.93 65.060.10ISO/TC 23/SC 2
ISO 789-9:1990
Agricultural tractors -- Test procedures -- Part 9: Power tests for drawbar
90.92 65.060.10ISO/TC 23/SC 2
ISO 789-9:1990/Amd 1:1993
60.60 65.060.10ISO/TC 23/SC 2
ISO/OECD 789-10:2006
Agricultural tractors -- Test procedures -- Part 10: Hydraulic power at tractor/implement interface
90.93 65.060.10ISO/TC 23/SC 2
ISO 789-11:1996
Agricultural tractors -- Test procedures -- Part 11: Steering capability of wheeled tractors
90.93 65.060.10ISO/TC 23/SC 2
ISO 789-12:2000
Agricultural tractors -- Test procedures -- Part 12: Low temperature starting
90.92 65.060.10ISO/TC 23/SC 2
ISO 2057:1981
Agricultural tractors -- Remote control hydraulic cylinders for trailed implements
90.93 65.060.01ISO/TC 23/SC 4
ISO 2332:2009
Agricultural tractors and machinery -- Connection of implements via three-point linkage -- Clearance zone around implement
90.20 65.060.01ISO/TC 23/SC 4
ISO 3463:2006
Tractors for agriculture and forestry -- Roll-over protective structures (ROPS) -- Dynamic test method and acceptance conditions
90.93 65.060.10
65.060.80
ISO/TC 23/SC 2
ISO 3600:1996
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Operator's manuals -- Content and presentation
90.92 65.060.01ISO/TC 23/SC 14
ISO 3767-1:1998
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 1: Common symbols
90.92 65.060.01
01.080.20
ISO/TC 23/SC 14
ISO 3767-1:1998/Amd 1:2008
Additional symbols
60.60 65.060.01
01.080.20
ISO/TC 23/SC 14
ISO 3767-1:1998/Amd 2:2012
Additional symbols concerning the engine emissions system and diesel exhaust fluid
60.60 65.060.01
01.080.20
ISO/TC 23/SC 14
ISO 3767-2:2008
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 2: Symbols for agricultural tractors and machinery
90.92 01.080.20
65.060.01
ISO/TC 23/SC 14
ISO 3767-3:1995
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 3: Symbols for powered lawn and garden equipment
90.92 65.060.70
01.080.20
ISO/TC 23/SC 14
ISO 3767-4:1993
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 4: Symbols for forestry machinery
90.92 65.060.80
01.080.20
ISO/TC 23/SC 14
ISO 3767-4:1993/Amd 1:2000
Additional symbols
60.60 01.080.20
65.060.80
ISO/TC 23/SC 14
ISO 3767-4:1993/Amd 2:2008
Additional symbols
60.60 65.060.80
01.080.20
ISO/TC 23/SC 14
ISO 3767-5:1992
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 5: Symbols for manual portable forestry machinery
90.92 01.080.20
65.060.80
ISO/TC 23/SC 14
ISO 3767-5:1992/Amd 1:2001
Revised and additional symbols
60.60 01.080.20
65.060.80
ISO/TC 23/SC 14
ISO 3776-1:2006
Tractors and machinery for agriculture -- Seat belts -- Part 1: Anchorage location requirements
90.93 65.060.10ISO/TC 23/SC 3
ISO 3776-2:2013
Tractors and machinery for agriculture -- Seat belts -- Part 2: Anchorage strength requirements
60.60 65.060.10ISO/TC 23/SC 2
ISO 3776-3:2009
Tractors and machinery for agriculture -- Seat belts -- Part 3: Requirements for assemblies
90.20 65.060.10ISO/TC 23/SC 2
ISO 3835-1:1976
Equipment for vine cultivation and wine making -- Vocabulary
90.93 65.060.60
01.040.65
ISO/TC 23
ISO 3835-2:1977
Equipment for vine cultivation and wine making -- Vocabulary
90.20 65.060.60
01.040.65
ISO/TC 23
ISO 3835-3:1980
Equipment for vine cultivation and wine making -- Vocabulary
90.93 65.060.60
01.040.65
ISO/TC 23
ISO 3835-4:1981
Equipment for vine cultivation and wine making -- Vocabulary
90.93 65.060.60
01.040.65
ISO/TC 23
ISO 3835-5:1982
Equipment for vine cultivation and wine making -- Vocabulary
90.20 01.040.65
65.060.60
ISO/TC 23
ISO 3918:2007
Milking machine installations -- Vocabulary
90.93 65.040.10
01.040.65
ISO/TC 23
ISO 3965:1990
Agricultural wheeled tractors -- Maximum speeds -- Method of determination
90.93 65.060.10ISO/TC 23/SC 2
ISO 4002-1:1979
Equipment for sowing and planting -- Part 1: Concave disks type D1 -- Dimensions
90.93 65.060.30ISO/TC 23
ISO 4002-2:1977
Equipment for sowing and planting -- Disks -- Part 2: Flat disks type D2 with single bevel -- Dimensions
90.20 65.060.30ISO/TC 23
ISO 4004:1983
Agricultural tractors and machinery -- Track widths
90.93 65.060.01ISO/TC 23/SC 4
ISO 4102:1984
Equipment for crop protection -- Sprayers -- Connection threading
90.93 65.060.40ISO/TC 23/SC 6
ISO 4197:1989
Equipment for working the soil -- Hoe blades -- Fixing dimensions
90.93 65.060.20ISO/TC 23
ISO 4252:2007
Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
90.93 65.060.10ISO/TC 23/SC 4
ISO 4253:1993
Agricultural tractors -- Operator's seating accommodation -- Dimensions
90.93 65.060.10ISO/TC 23/SC 4
ISO 4254-1:2013
Agricultural machinery -- Safety -- Part 1: General requirements
60.60 65.060.01ISO/TC 23/SC 3
ISO 4254-5:2008
Agricultural machinery -- Safety -- Part 5: Power-driven soil-working machines
90.92 65.060.20ISO/TC 23/SC 3
ISO 4254-6:2009
Agricultural machinery -- Safety -- Part 6: Sprayers and liquid fertilizer distributors
90.20 65.060.40ISO/TC 23/SC 6
ISO 4254-7:2008
Agricultural machinery -- Safety -- Part 7: Combine harvesters, forage harvesters and cotton harvesters
90.92 65.060.50ISO/TC 23/SC 7
ISO 4254-8:2009
Agricultural machinery -- Safety -- Part 8: Solid fertilizer distributors
90.92 65.060.25ISO/TC 23/SC 3
ISO 4254-9:2008
Agricultural machinery -- Safety -- Part 9: Seed drills
90.92 65.060.30ISO/TC 23/SC 3
ISO 4254-10:2009
Agricultural machinery -- Safety -- Part 10: Rotary tedders and rakes
60.60 65.060.50ISO/TC 23/SC 7
ISO 4254-11:2010
Agricultural machinery -- Safety -- Part 11: Pick-up balers
90.92 65.060.50ISO/TC 23/SC 7
ISO 4254-12:2012
Agricultural machinery -- Safety -- Part 12: Rotary disc and drum mowers and flail mowers
60.60 65.060.50ISO/TC 23/SC 7
ISO 4254-13:2012
Agricultural machinery -- Safety -- Part 13: Large rotary mowers
60.60 65.060.01ISO/TC 23/SC 7
ISO 5007:2003
Agricultural wheeled tractors -- Operator's seat -- Laboratory measurement of transmitted vibration
90.93 65.060.10
13.160
ISO/TC 23/SC 2
ISO 5008:2002
Agricultural wheeled tractors and field machinery -- Measurement of whole-body vibration of the operator
90.93 65.060.01
13.160
ISO/TC 23/SC 2
ISO 5008:2002/Cor 1:2005
60.60 65.060.01
13.160
ISO/TC 23/SC 2
ISO 5131:1996
Acoustics -- Tractors and machinery for agriculture and forestry -- Measurement of noise at the operator's position -- Survey method
90.92 17.140.20
65.060.01
ISO/TC 23/SC 2
ISO 5395-1:2013
Garden equipment -- Safety requirements for combustion-engine-powered lawnmowers -- Part 1: Terminology and common tests
60.60 65.060.70ISO/TC 23/SC 13
ISO 5395-2:2013
Garden equipment -- Safety requirements for combustion-engine-powered lawnmowers -- Part 2: Pedestrian-controlled lawnmowers
60.60 65.060.70ISO/TC 23/SC 13
ISO 5395-3:2013
Garden equipment -- Safety requirements for combustion-engine-powered lawnmowers -- Part 3: Ride-on lawnmowers with seated operator
60.60 65.060.70ISO/TC 23/SC 13
ISO 5669:1982
Agricultural trailers and trailed equipment -- Braking cylinders -- Specifications
90.20 65.060.01ISO/TC 23
ISO 5670:1984
Agricultural trailers -- Single-acting telescopic tipping cylinders -- 25 MPa (250 bar) series -- Types 1, 2 and 3 -- Interchangeability dimensions
90.93 65.060.10ISO/TC 23/SC 4
ISO 5673-1:2005
Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 1: General manufacturing and safety requirements
90.93 65.060.01ISO/TC 23/SC 4
ISO 5673-2:2005
Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 2: Specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments
90.93 65.060.01ISO/TC 23/SC 4
ISO 5674:2004
Tractors and machinery for agriculture and forestry -- Guards for power take-off (PTO) drive-shafts -- Strength and wear tests and acceptance criteria
90.93 65.060.01ISO/TC 23/SC 2
ISO 5675:2008
Agricultural tractors and machinery -- General purpose quick-action hydraulic couplers
90.93 65.060.10ISO/TC 23/SC 4
ISO 5676:1983
Tractors and machinery for agriculture and forestry -- Hydraulic coupling -- Braking circuit
90.93 65.060.01ISO/TC 23/SC 4
ISO 5678:1993
Agricultural machinery -- Equipment for working the soil -- S-tines: main dimensions and clearance zones
90.20 65.060.20ISO/TC 23
ISO 5679:1979
Equipment for working the soil -- Disks -- Classification, main fixing dimensions and specifications
90.93 65.060.20ISO/TC 23
ISO 5680:1979
Equipment for working soil -- Tines and shovels for cultivators -- Main fixing dimensions
90.93 65.060.20ISO/TC 23
ISO 5681:1992
Equipment for crop protection -- Vocabulary
90.92 65.060.40
01.040.65
ISO/TC 23/SC 6
ISO 5682-1:1996
Equipment for crop protection -- Spraying equipment -- Part 1: Test methods for sprayer nozzles
90.92 65.060.40ISO/TC 23/SC 6
ISO 5682-2:1997
Equipment for crop protection -- Spraying equipment -- Part 2: Test methods for hydraulic sprayers
90.92 65.060.40ISO/TC 23/SC 6
ISO 5682-3:1996
Equipment for crop protection -- Spraying equipment -- Part 3: Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
90.92 65.060.40ISO/TC 23/SC 6
ISO 5687:1999
Equipment for harvesting -- Combine harvesters -- Determination and designation of grain tank capacity and unloading device performance
90.60 65.060.50ISO/TC 23/SC 7
ISO 5690-1:1985
Equipment for distributing fertilizers -- Test methods -- Part 1: Full width fertilizer distributors
90.93 65.060.25ISO/TC 23
ISO 5690-2:1984
Equipment for distributing fertilizers -- Test methods -- Part 2: Fertilizer distributors in lines
90.93 65.060.25ISO/TC 23
ISO 5691:1981
Equipment for planting -- Potato planters -- Method of testing
90.93 65.060.30ISO/TC 23
ISO 5692-1:2004
Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 1: Dimensions for hitch rings of 50/30 mm cross section
90.60 65.060.10ISO/TC 23/SC 4
ISO 5692-2:2002
Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 2: Coupling ring 40 with socket
90.60 65.060.10ISO/TC 23/SC 4
ISO 5692-2:2002/Cor 1:2004
60.60 65.060.10ISO/TC 23/SC 4
ISO 5692-3:2011
Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 3: Swivel hitch rings
60.60 65.060.10ISO/TC 23/SC 4
ISO 5696:1984
Trailed agricultural vehicles -- Brakes and braking devices -- Laboratory test method
90.93 65.060.10ISO/TC 23/SC 2
ISO 5697:1982
Agricultural and forestry vehicles -- Determination of braking performance
90.93 65.060.01ISO/TC 23/SC 2
ISO 5699:1979
Agricultural machines, implements and equipment -- Dimensions for mechanical loading with bulk goods
90.93 65.060.01ISO/TC 23
ISO 5700:2013
Tractors for agriculture and forestry -- Roll-over protective structures -- Static test method and acceptance conditions
60.60 65.060.80
65.060.10
ISO/TC 23/SC 2
ISO 5702:1983
Equipment for harvesting -- Combine harvester component parts -- Equivalent terms
90.60 65.060.50
01.040.65
ISO/TC 23/SC 7
ISO 5703:1979
Equipment for vine cultivation and wine making -- Grape presses -- Methods of test
90.93 65.060.60ISO/TC 23
ISO 5704:1980
Equipment for vine cultivation and wine making -- Grape-harvesting machinery -- Test methods
90.93 65.060.60
65.060.50
ISO/TC 23
ISO 5707:2007
Milking machine installations -- Construction and performance
90.93 65.040.10ISO/TC 23
ISO 5708:1983
Refrigerated bulk milk tanks
90.93 65.040.10ISO/TC 23
ISO 5710:1980
Equipment for internal farm work and husbandry -- Continuous manure scraper conveyors for stalls
90.93 65.040.10ISO/TC 23
ISO 5711:1995
Tractors and machinery for agriculture and forestry -- Wheel-to-hub fixing dimensions
90.93 65.060.01ISO/TC 23/SC 4
ISO 5713:1990
Equipment for working the soil -- Fixing bolts for soil working elements
90.93 65.060.20ISO/TC 23
ISO 5715:1983
Equipment for harvesting -- Dimensional compatibility of forage harvesting machinery
90.60 65.060.50ISO/TC 23/SC 7
ISO 5718:2013
Harvesting equipment -- Blades for agricultural rotary mowers -- Requirements
60.60 65.060.50ISO/TC 23/SC 7
ISO 5721:1989
Tractors for agriculture -- Operator's field of vision
90.92 65.060.10ISO/TC 23/SC 4
ISO 5721-1:2013
Agricultural tractors -- Requirements, test procedures and acceptance criteria for the operator's field of vision -- Part 1: Field of vision to the front
60.60 65.060.10ISO/TC 23/SC 4
ISO 5721-2:2014
Agricultural tractors-- Requirements, test procedures and acceptance criteria for the operator's field of vision -- Part 2: Field of vision to the side and to the rear
60.60 65.060.10ISO/TC 23/SC 4
ISO 6489-1:2001
Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 1: Dimensions of hitch-hooks
90.93 65.060.10ISO/TC 23/SC 4
ISO 6489-2:2002
Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 2: Specifications for clevis coupling 40
90.60 65.060.10ISO/TC 23/SC 4
ISO 6489-3:2004
Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 3: Tractor drawbar
90.60 65.060.10ISO/TC 23/SC 4
ISO 6489-4:2004
Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 4: Dimensions of piton-type coupling
90.60 65.060.01
65.060.10
ISO/TC 23/SC 4
ISO 6489-5:2011
Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 5: Specifications for non-swivel clevis couplings
60.60 65.060.10ISO/TC 23/SC 4
ISO 6531:2008
Machinery for forestry -- Portable chain-saws -- Vocabulary
90.93 65.060.80
01.040.65
ISO/TC 23/SC 17
ISO 6533:2012
Forestry machinery -- Portable chain-saw front hand-guard -- Dimensions and clearances
60.60 65.060.80ISO/TC 23/SC 17
ISO 6534:2007
Forestry machinery -- Portable chain-saw hand-guards -- Mechanical strength
90.93 65.060.80ISO/TC 23/SC 17
ISO 6534:2007/Amd 1:2012
60.60 65.060.80ISO/TC 23/SC 17
ISO 6535:2008
Portable chain-saws -- Chain brake performance
90.92 65.060.80ISO/TC 23/SC 17
ISO 6686:1995
Equipment for crop protection -- Antidrip devices -- Determination of performance
90.93 65.060.40ISO/TC 23/SC 6
ISO 6689-1:1997
Equipment for harvesting -- Combines and functional components -- Part 1: Vocabulary
90.60 65.060.50
01.040.65
ISO/TC 23/SC 7
ISO 6689-2:1997
Equipment for harvesting -- Combines and functional components -- Part 2: Assessment of characteristics and performance defined in vocabulary
90.60 65.060.50ISO/TC 23/SC 7
ISO 6690:2007
Milking machine installations -- Mechanical tests
90.93 65.040.10ISO/TC 23
ISO 6720:1989
Agricultural machinery -- Equipment for sowing, planting, distributing fertilizers and spraying -- Recommended working widths
90.93 65.060.30
65.060.25
65.060.40
ISO/TC 23
ISO 6814:2009
Machinery for forestry -- Mobile and self-propelled machinery -- Terms, definitions and classification
90.93 65.060.80
01.040.65
ISO/TC 23/SC 15
ISO 6880:1983
Machinery for agriculture -- Trailed units of shallow tillage equipment -- Main dimensions and attachment points
90.93 65.060.20ISO/TC 23
ISO 7072:1993
Tractors and machinery for agriculture and forestry -- Linch pins and spring pins -- Dimensions and requirements
90.93 65.060.01ISO/TC 23/SC 4
ISO 7112:2008
Machinery for forestry -- Portable brush-cutters and grass-trimmers -- Vocabulary
90.93 65.060.80
01.040.65
ISO/TC 23/SC 17
ISO 7113:1999
Portable hand-held forestry machines -- Cutting attachments for brush cutters -- Single-piece metal blades
90.20 65.060.80ISO/TC 23/SC 17
ISO 7216:1992
Acoustics -- Agricultural and forestry wheeled tractors and self-propelled machines -- Measurement of noise emitted when in motion
90.92 17.140.20
65.060.01
ISO/TC 23/SC 2
ISO 7224:1983
Equipment for vine cultivation and wine making -- Mash pumps -- Methods of test
90.93 65.060.60ISO/TC 23
ISO 7256-1:1984
Sowing equipment -- Test methods -- Part 1: Single seed drills (precision drills)
90.93 65.060.30ISO/TC 23
ISO 7256-2:1984
Sowing equipment -- Test methods -- Part 2: Seed drills for sowing in lines
90.93 65.060.30ISO/TC 23
ISO 7293:1997
Forestry machinery -- Portable chain saws -- Engine performance and fuel consumption
90.93 65.060.80ISO/TC 23/SC 17
ISO 7714:2008
Agricultural irrigation equipment -- Volumetric valves -- General requirements and test methods
90.60 65.060.35ISO/TC 23/SC 18
ISO 7749-1:1995
Agricultural irrigation equipment -- Rotating sprinklers -- Part 1: Design and operational requirements
90.60 65.060.35ISO/TC 23/SC 18
ISO 7914:2002
Forestry machinery -- Portable chain-saws -- Minimum handle clearance and sizes
90.93 65.060.80ISO/TC 23/SC 17
ISO 7914:2002/Amd 1:2012
60.60 65.060.80ISO/TC 23/SC 17
ISO 7915:1991
Forestry machinery -- Portable chain-saws -- Determination of handle strength
90.93 65.060.80ISO/TC 23/SC 17
ISO 7918:1995
Forestry machinery -- Portable brush-cutters and grass-trimmers -- Cutting attachment guard dimensions
90.93 65.060.80ISO/TC 23/SC 17
ISO 8016:1985
Machinery for agriculture -- Wheels with integral hub
90.93 65.060.01ISO/TC 23
ISO 8026:2009
Agricultural irrigation equipment -- Sprayers -- General requirements and test methods
60.60 65.060.35ISO/TC 23/SC 18
ISO/TR 8059:1986
Irrigation equipment -- Automatic irrigation systems -- Hydraulic control
60.60 65.060.35ISO/TC 23/SC 18
ISO 8082-1:2009
Self-propelled machinery for forestry -- Laboratory tests and performance requirements for roll-over protective structures -- Part 1: General machines
90.93 65.060.80ISO/TC 23/SC 15
ISO 8082-2:2011
Self-propelled machinery for forestry -- Laboratory tests and performance requirements for roll-over protective structures -- Part 2: Machines having a rotating platform with a cab and boom on the platform
60.60 65.060.80ISO/TC 23/SC 15
ISO 8083:2006
Machinery for forestry -- Falling-object protective structures (FOPS) -- Laboratory tests and performance requirements
90.93 65.060.80ISO/TC 23/SC 15
ISO 8084:2003
Machinery for forestry -- Operator protective structures -- Laboratory tests and performance requirements
90.93 65.060.80ISO/TC 23/SC 15
ISO 8088:1994
Equipment for olive cultivation and olive oil production -- Vocabulary
90.93 65.040.20
01.040.65
65.060.70
ISO/TC 23
ISO 8169:1984
Equipment for crop protection -- Sprayers -- Connecting dimensions for nozzles and manometers
90.93 65.060.40ISO/TC 23/SC 6
ISO 8210:1989
Equipment for harvesting -- Combine harvesters -- Test procedure
90.60 65.060.50ISO/TC 23/SC 7
ISO 8224-1:2003
Traveller irrigation machines -- Part 1: Operational characteristics and laboratory and field test methods
90.20 65.060.35ISO/TC 23/SC 18
ISO 8224-1:2003/Amd 1:2011
60.60 65.060.35ISO/TC 23/SC 18
ISO 8224-2:1991
Traveller irrigation machines -- Part 2: Softwall hose and couplings -- Test methods
90.93 65.060.35ISO/TC 23/SC 18
ISO 8334:2007
Forestry machinery -- Portable chain-saws -- Determination of balance and maximum holding moment
90.93 65.060.80ISO/TC 23/SC 17
ISO 8380:1993
Forestry machinery -- Portable brush-cutters and grass-trimmers -- Cutting attachment guard strength
90.20 65.060.80ISO/TC 23/SC 17
ISO 8437:1989
Snowthrowers -- Safety requirements and test procedures
90.92 43.160ISO/TC 23/SC 13
ISO 8437:1989/Amd 1:1997
60.60 43.160ISO/TC 23/SC 13
ISO 8524:1986
Equipment for distributing granulated pesticides or herbicides -- Test method
90.93 65.060.40ISO/TC 23/SC 6
ISO 8759-1:1998
Agricultural wheeled tractors -- Front-mounted equipment -- Part 1: Power take-off and three- point linkage
90.93 65.060.10ISO/TC 23/SC 4
ISO 8759-2:1998
Agricultural wheeled tractors -- Front-mounted equipment -- Part 2: Stationary equipment connection
90.93 65.060.10ISO/TC 23/SC 4
ISO 8893:1997
Forestry machinery -- Portable brush-cutters and grass-trimmers -- Engine performance and fuel consumption
90.93 65.060.80ISO/TC 23/SC 17
ISO 8909-1:1994
Forage harvesters -- Part 1: Vocabulary
90.60 65.060.50
01.040.65
ISO/TC 23/SC 7
ISO 8909-2:1994
Forage harvesters -- Part 2: Specification of characteristics and performance
90.60 65.060.50ISO/TC 23/SC 7
ISO 8909-3:1994
Forage harvesters -- Part 3: Test methods
90.60 65.060.50ISO/TC 23/SC 7
ISO 8910:1993
Machinery and equipment for working the soil -- Mouldboard plough working elements -- Vocabulary
90.20 65.060.20
01.040.65
ISO/TC 23
ISO 8912:1986
Equipment for working the soil -- Roller sections -- Coupling and section width
90.20 65.060.20ISO/TC 23
ISO 8935:1990
Tractors for agriculture and forestry -- Mountings and apertures for external equipment controls
90.93 65.060.10ISO/TC 23/SC 4
ISO 8945:1989
Equipment for working the soil -- Rotary cultivator blades -- Fixing dimensions
90.93 65.060.20ISO/TC 23
ISO 8947:1993
Agricultural machinery -- Equipment for working the soil -- S-tines: test method
90.20 65.060.20ISO/TC 23
ISO 9191:1991
Lawn and garden ride-on (riding) tractors -- Three-point hitch
95.92 65.060.70ISO/TC 23/SC 13
ISO 9192:1991
Lawn and garden ride-on (riding) tractors -- One-point tubular sleeve hitch
95.92 65.060.70ISO/TC 23/SC 13
ISO 9261:2004
Agricultural irrigation equipment -- Emitters and emitting pipe -- Specification and test methods
90.60 65.060.35ISO/TC 23/SC 18
ISO 9357:1990
Equipment for crop protection -- Agricultural sprayers -- Tank nominal volume and filling hole diameter
90.93 65.060.40ISO/TC 23/SC 6
ISO 9467:1993
Forestry machinery -- Portable chain-saws and brush-cutters -- Exhaust system-caused fire risk
90.93 65.060.80ISO/TC 23/SC 17
ISO 9518:1998
Forestry machinery -- Portable chain-saws -- Kickback test
90.92 65.060.80ISO/TC 23/SC 17
ISO 9635-1:2006
Agricultural irrigation equipment -- Irrigation valves -- Part 1: General requirements
90.92 65.060.35ISO/TC 23/SC 18
ISO 9635-2:2006
Agricultural irrigation equipment -- Irrigation valves -- Part 2: Isolating valves
90.92 65.060.35ISO/TC 23/SC 18
ISO 9635-3:2006
Agricultural irrigation equipment -- Irrigation valves -- Part 3: Check valves
90.92 65.060.35ISO/TC 23/SC 18
ISO 9635-4:2006
Agricultural irrigation equipment -- Irrigation valves -- Part 4: Air valves
90.92 65.060.35ISO/TC 23/SC 18
ISO 9635-5:2006
Agricultural irrigation equipment -- Irrigation valves -- Part 5: Control valves
90.92 65.060.35ISO/TC 23/SC 18
ISO 9644:2008
Agricultural irrigation equipment -- Pressure losses in irrigation valves -- Test method
90.60 65.060.35ISO/TC 23/SC 18
ISO 9898:2000
Equipment for crop protection -- Test methods for air-assisted sprayers for bush and tree crops
90.93 65.060.40ISO/TC 23/SC 6
ISO 9911:2006
Agricultural irrigation equipment -- Manually operated small plastics valves
90.93 65.060.35ISO/TC 23/SC 18
ISO 9912-1:2004
Agricultural irrigation equipment -- Filters for micro-irrigation -- Part 1: Terms, definitions and classification
90.93 65.060.35ISO/TC 23/SC 18
ISO 9912-2:2013
Agricultural irrigation equipment -- Filters for microirrigation -- Part 2: Strainer-type filters and disc filters
60.60 65.060.35ISO/TC 23/SC 18
ISO 9912-3:2013
Agricultural irrigation equipment -- Filters for microirrigation -- Part 3: Automatic flushing strainer-type filters and disc filters
60.60 65.060.35ISO/TC 23/SC 18
ISO 10448:1994
Agricultural tractors -- Hydraulic pressure for implements
90.93 65.060.01ISO/TC 23/SC 4
ISO 10517:2009
Powered hand-held hedge trimmers -- Safety
60.60 65.060.70ISO/TC 23/SC 13
ISO 10517:2009/Amd 1:2013
60.60 65.060.70ISO/TC 23/SC 13
ISO 10522:1993
Agricultural irrigation equipment -- Direct-acting pressure-regulating valves
90.60 65.060.35ISO/TC 23/SC 18
ISO 10625:2005
Equipment for crop protection -- Sprayer nozzles -- Colour coding for identification
90.93 01.070
65.060.40
ISO/TC 23/SC 6
ISO 10626:1991
Equipment for crop protection -- Sprayers -- Connecting dimensions for nozzles with bayonet fixing
90.93 65.060.40ISO/TC 23/SC 6
ISO 10627-1:1992
Agricultural sprayers -- Data sheet -- Part 1: Typical layout
90.93 65.060.40ISO/TC 23/SC 6
ISO 10627-2:1996
Hydraulic agricultural sprayers -- Data sheets -- Part 2: Technical specifications related to components
90.93 65.060.40ISO/TC 23/SC 6
ISO 10726:1992
Portable chain saws -- Chain catcher -- Dimensions and mechanical strength
90.93 65.060.80ISO/TC 23/SC 17
ISO 10975:2009
Tractors and machinery for agriculture -- Auto-guidance systems for operator-controlled tractors and self-propelled machines -- Safety requirements
60.60 65.060.01ISO/TC 23/SC 3
ISO 10988:2011
Equipment for crop protection -- Knapsack motorized air-assisted sprayers -- Test methods and performance limits
60.60 65.060.40ISO/TC 23/SC 6
ISO 10998:2008
Agricultural tractors -- Requirements for steering
90.93 65.060.10ISO/TC 23/SC 4
ISO 10998:2008/Amd 1:2014
60.60 65.060.10ISO/TC 23/SC 4
ISO 11001-1:1993
Agricultural wheeled tractors and implements -- Three-point hitch couplers -- Part 1: U-frame coupler
90.92 65.060.01ISO/TC 23/SC 4
ISO 11001-2:1993
Agricultural wheeled tractors and implements -- Three-point hitch couplers -- Part 2: A-frame coupler
90.93 65.060.01ISO/TC 23/SC 4
ISO 11001-3:2009
Agricultural wheeled tractors and implements -- Three-point hitch couplers -- Part 3: Link coupler
90.20 65.060.01ISO/TC 23/SC 4
ISO 11001-4:1994
Agricultural wheeled tractors and implements -- Three-point hitch couplers -- Part 4: Bar coupler
90.93 65.060.01ISO/TC 23/SC 4
ISO 11169:1993
Machinery for forestry -- Wheeled special machines -- Vocabulary, performance test methods and criteria for brake systems
90.93 65.060.80ISO/TC 23/SC 15
ISO/TS 11356:2011
Crop protection equipment -- Traceability -- Spray parameter recording
90.20 65.060.40ISO/TC 23/SC 6
ISO 11448:1997
Powered shredders and chippers -- Definitions, safety requirements and test procedures
90.93 65.060.70ISO/TC 23/SC 13
ISO 11449:1994
Walk-behind powered rotary tillers -- Definitions, safety requirements and test procedures
90.93 65.060.70ISO/TC 23/SC 13
ISO 11450:1999
Equipment for harvesting and conservation -- Round balers -- Terminology and commercial specifications
90.60 65.060.50
01.040.65
ISO/TC 23/SC 7
ISO 11471:1995
Agricultural tractors and machinery -- Coding of remote hydraulic power services and controls
90.93 65.060.10ISO/TC 23/SC 4
ISO 11512:1995
Machinery for forestry -- Tracked special machines -- Performance criteria for brake systems
90.93 65.060.80ISO/TC 23/SC 15
ISO 11520-1:1997
Agricultural grain driers -- Determination of drying performance -- Part 1: General
90.20 65.040.20ISO/TC 23/SC 7
ISO 11520-2:2001
Agricultural grain driers -- Determination of drying performance -- Part 2: Additional procedures and crop-specific requirements
90.60 65.040.20ISO/TC 23/SC 7
ISO 11545:2009
Agricultural irrigation equipment -- Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles -- Determination of uniformity of water distribution
60.60 65.060.35ISO/TC 23/SC 18
ISO 11678:1996
Agricultural irrigation equipment -- Aluminium irrigation tubes
90.93 65.060.35ISO/TC 23/SC 18
ISO 11680-1:2011
Machinery for forestry -- Safety requirements and testing for pole-mounted powered pruners -- Part 1: Machines fitted with an integral combustion engine
60.60 65.060.80ISO/TC 23/SC 17
ISO 11680-2:2011
Machinery for forestry -- Safety requirements and testing for pole-mounted powered pruners -- Part 2: Machines for use with back-pack power source
60.60 65.060.80ISO/TC 23/SC 17
ISO 11681-1:2011
Machinery for forestry -- Portable chain-saw safety requirements and testing -- Part 1: Chain-saws for forest service
60.60 65.060.80ISO/TC 23/SC 17
ISO 11681-2:2011
Machinery for forestry -- Portable chain-saw safety requirements and testing -- Part 2: Chain-saws for tree service
60.60 65.060.80ISO/TC 23/SC 17
ISO 11684:1995
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles
90.60 65.060.01
01.080.20
ISO/TC 23/SC 14
ISO 11738:2000
Agricultural irrigation equipment -- Control heads
90.93 65.060.35ISO/TC 23/SC 18
ISO 11783-1:2007
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 1: General standard for mobile data communication
90.92 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-2:2012
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 2: Physical layer
60.60 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-2:2012/Cor 1:2012
60.60 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 11783-3:2007
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 3: Data link layer
90.92 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 11783-4:2011
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 4: Network layer
60.60 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-5:2011
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 5: Network management
60.60 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-6:2010
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 6: Virtual terminal
90.92 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-7:2009
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 7: Implement messages application layer
90.92 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-8:2006
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 8: Power train messages
90.93 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-9:2012
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 9: Tractor ECU
60.60 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 11783-10:2009
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 10: Task controller and management information system data interchange
90.92 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-11:2011
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 11: Mobile data element dictionary
60.60 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-12:2009
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 12: Diagnostics services
90.92 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11783-13:2011
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 13: File server
60.60 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 11783-14:2013
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 14: Sequence control
60.60 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 11784:1996
Radio frequency identification of animals -- Code structure
90.93 65.040.99ISO/TC 23/SC 19
ISO 11784:1996/Amd 1:2004
60.60 65.040.99ISO/TC 23/SC 19
ISO 11784:1996/Amd 2:2010
Indication of an advanced transponder
60.60 65.040.99ISO/TC 23/SC 19
ISO 11785:1996
Radio frequency identification of animals -- Technical concept
90.93 65.040.99ISO/TC 23/SC 19
ISO 11785:1996/Cor 1:2008
60.60 65.040.99ISO/TC 23/SC 19
ISO 11786:1995
Agricultural tractors and machinery -- Tractor-mounted sensor interface -- Specifications
90.93 65.060.99ISO/TC 23/SC 19
ISO 11787:1995
Machinery for agriculture and forestry -- Data interchange between management computer and process computers -- Data interchange syntax
90.93 65.060.99ISO/TC 23/SC 19
ISO 11788-1:1997
Electronic data interchange between information systems in agriculture -- Agricultural data element dictionary -- Part 1: General description
90.93 35.240.99
65.020.01
ISO/TC 23/SC 19
ISO 11788-2:2000
Electronic data interchange between information systems in agriculture -- Agricultural data element dictionary -- Part 2: Dairy farming
90.93 65.020.01
35.240.99
ISO/TC 23/SC 19
ISO 11788-3:2000
Electronic data interchange between information systems in agriculture -- Agricultural data element dictionary -- Part 3: Pig farming
90.93 65.020.01
35.240.99
ISO/TC 23/SC 19
ISO 11789:1999
Powered edgers with rigid cutting means -- Definitions, safety requirements and test procedures
90.93 65.060.70ISO/TC 23/SC 13
ISO 11806-1:2011
Agricultural and forestry machinery -- Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers -- Part 1: Machines fitted with an integral combustion engine
60.60 65.060.80ISO/TC 23/SC 17
ISO 11806-2:2011
Agricultural and forestry machinery -- Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers -- Part 2: Machines for use with back-pack power unit
60.60 65.060.80ISO/TC 23/SC 17
ISO 11837:2011
Machinery for forestry -- Saw chain shot guarding systems -- Test method and performance criteria
60.60 65.060.80ISO/TC 23/SC 15
ISO 11839:2010
Machinery for forestry -- Glazing and panel materials used in operator enclosures for protection against thrown sawteeth -- Test method and performance criteria
60.60 65.060.80ISO/TC 23/SC 15
ISO 11839:2010/Cor 1:2012
60.60 65.060.80ISO/TC 23/SC 15
ISO 11850:2011
Machinery for forestry -- General safety requirements
60.60 65.060.80ISO/TC 23/SC 15
ISO 12003-1:2008
Agricultural and forestry tractors -- Roll-over protective structures on narrow-track wheeled tractors -- Part 1: Front-mounted ROPS
90.93 65.060.10ISO/TC 23/SC 2
ISO 12003-2:2008
Agricultural and forestry tractors -- Roll-over protective structures on narrow-track wheeled tractors -- Part 2: Rear-mounted ROPS
90.93 65.060.10ISO/TC 23/SC 2
ISO 12140:2013
Agricultural machinery -- Agricultural trailers and trailed equipment -- Drawbar jacks
60.60 65.060.01ISO/TC 23/SC 3
ISO 12188-1:2010
Tractors and machinery for agriculture and forestry -- Test procedures for positioning and guidance systems in agriculture -- Part 1: Dynamic testing of satellite-based positioning devices
60.60 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 12188-2:2012
Tractors and machinery for agriculture and forestry -- Test procedures for positioning and guidance systems in agriculture -- Part 2: Testing of satellite-based auto-guidance systems during straight and level travel
60.60 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 12368:2001
Agricultural vehicles -- Mechanical hook-type connections on towing vehicles -- Test methods and requirements
90.93 65.060.10ISO/TC 23/SC 2
ISO/TR 12369:1994/Amd 1:1999
60.60 65.060.01ISO/TC 23/SC 4
ISO 12374:1995
Agricultural irrigation -- Wiring and equipment for electrically driven or controlled irrigation machines
90.60 65.060.35ISO/TC 23/SC 18
ISO 12809:2011
Crop protection equipment -- Reciprocating positive displacement pumps and centrifugal pumps -- Test methods
60.60 65.060.40ISO/TC 23/SC 6
ISO 12934:2013
Tractors and machinery for agriculture and forestry -- Basic types -- Vocabulary
60.60 65.060.01ISO/TC 23/SC 2
ISO 13440:1996
Equipment for crop protection -- Agricultural sprayers -- Determination of the volume of total residual
90.93 65.060.40ISO/TC 23/SC 6
ISO 13441-1:1997
Air-assisted agricultural sprayers -- Data sheets -- Part 1: Typical layout
90.93 65.060.40ISO/TC 23/SC 6
ISO 13441-2:1997
Air-assisted agricultural sprayers -- Data sheets -- Part 2: Technical specifications related to components
90.93 65.060.40ISO/TC 23/SC 6
ISO 13457:2008
Agricultural irrigation equipment -- Water-driven chemical injector pumps
90.60 65.060.35ISO/TC 23/SC 18
ISO 13460:1998
Agricultural irrigation equipment -- Plastics saddles for polyethylene pressure pipes
90.92 65.060.35ISO/TC 23/SC 18
ISO 13693-1:2013
Irrigation equipment -- Safety devices for chemigation -- Part 1: Small plastics valves for chemigation
60.60 65.060.35ISO/TC 23/SC 18
ISO 13772:2009
Forestry machinery -- Portable chain-saws -- Non-manually actuated chain brake performance
90.20 65.060.80ISO/TC 23/SC 17
ISO 13860:2000
Machinery for forestry -- Forwarders -- Terms, definitions and commercial specifications
90.92 65.060.80
01.040.65
ISO/TC 23/SC 15
ISO 13861:2000
Machinery for forestry -- Wheeled skidders -- Terms, definitions and commercial specifications
90.93 65.060.80
01.040.65
ISO/TC 23/SC 15
ISO 13862:2000
Machinery for forestry -- Feller-bunchers -- Terms, definitions and commercial specifications
90.93 65.060.80
01.040.65
ISO/TC 23/SC 15
ISO 14131:2005
Agricultural sprayers -- Boom steadiness -- Test methods
90.93 65.060.40ISO/TC 23/SC 6
ISO 14223-1:2011
Radiofrequency identification of animals -- Advanced transponders -- Part 1: Air interface
60.60 65.020.30
35.240.99
ISO/TC 23/SC 19
ISO 14223-2:2010
Radiofrequency identification of animals -- Advanced transponders -- Part 2: Code and command structure
60.60 65.020.30
35.240.99
ISO/TC 23/SC 19
ISO 14269-1:1997
Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 1: Vocabulary
90.93 65.060.01ISO/TC 23/SC 2
ISO 14269-2:1997
Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 2: Heating, ventilation and air-conditioning test method and performance
90.93 65.060.01ISO/TC 23/SC 2
ISO 14269-3:1997
Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 3: Determination of effect of solar heating
90.93 65.060.01ISO/TC 23/SC 2
ISO 14269-4:1997
Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 4: Air filter element test method
90.93 65.060.01ISO/TC 23/SC 2
ISO 14269-5:1997
Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 5: Pressurization system test method
90.93 65.060.01ISO/TC 23/SC 2
ISO 14710:1996
Equipment for crop protection -- Air-assisted sprayers -- Dimensions of nozzle swivel nuts
90.93 65.060.40ISO/TC 23/SC 6
ISO 14982:1998
Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and acceptance criteria
90.92 33.100.01
65.060.01
ISO/TC 23/SC 2
ISO 15003:2006
Agricultural engineering -- Electrical and electronic equipment -- Testing resistance to environmental conditions
90.93 65.060.99ISO/TC 23/SC 19
ISO 15077:2008
Tractors and self-propelled machinery for agriculture -- Operator controls -- Actuating forces, displacement, location and method of operation
90.60 65.060.01ISO/TC 23/SC 3
ISO/TS 15079:2001
Powered lawn, garden and horticultural equipment -- Operator controls -- Guidance on actuating forces, displacement, location and methods of operation
90.60 65.060.70ISO/TC 23/SC 13
ISO 15081:2011
Agricultural equipment -- Graphical symbols for pressurized irrigation systems
60.60 65.060.35
01.080.30
ISO/TC 23/SC 18
ISO/TR 15155:2005
Test facilities for agricultural irrigation equipment
90.92 65.060.35ISO/TC 23/SC 18
ISO/TR 15155-2:2012
Agricultural irrigation equipment -- Test facilities for agricultural irrigation equipment -- Part 2: Test facility operating manual
60.60 65.060.35ISO/TC 23/SC 18
ISO 15873:2002
Irrigation equipment -- Differential pressure Venturi-type liquid additive injectors
90.60 65.060.35ISO/TC 23/SC 18
ISO 15886-1:2012
Agricultural irrigation equipment -- Sprinklers -- Part 1: Definition of terms and classification
60.60 65.060.35ISO/TC 23/SC 18
ISO 15886-3:2012
Agricultural irrigation equipment -- Sprinklers -- Part 3: Characterization of distribution and test methods
60.60 65.060.35ISO/TC 23/SC 18
ISO 16119-1:2013
Agricultural and forestry machinery -- Environmental requirements for sprayers -- Part 1: General
60.60 65.060.40ISO/TC 23/SC 6
ISO 16119-2:2013
Agricultural and forestry machinery -- Environmental requirements for sprayers -- Part 2: Horizontal boom sprayers
60.60 65.060.40ISO/TC 23/SC 6
ISO 16119-3:2013
Agricultural and forestry machinery -- Environmental requirements for sprayers -- Part 3: Sprayers for bush and tree crops
60.60 65.060.40ISO/TC 23/SC 6
ISO 16149:2006
Agricultural irrigation equipment -- PVC above-ground low-pressure pipe for surface irrigation -- Specifications and test methods
90.93 65.060.35ISO/TC 23/SC 18
ISO 16154:2005
Tractors and machinery for agriculture and forestry -- Installation of lighting, light signalling and marking devices for travel on public roadways
90.93 65.060.10
43.040.30
ISO/TC 23/SC 4
ISO 16231-1:2013
Self-propelled agricultural machinery -- Assessment of stability -- Part 1: Principles
60.60 65.060.01ISO/TC 23/SC 3
ISO 16236:2013
Crop protection equipment -- Test method for the determination of drainable volume and its concentration
60.60 65.060.40ISO/TC 23/SC 6
ISO 16438:2012
Agricultural irrigation equipment -- Thermoplastic collapsible hoses for irrigation -- Specifications and test methods
60.60 65.060.35ISO/TC 23/SC 18
ISO 17080:2005
Manually portable agricultural and forestry machines and powered lawn and garden equipment -- Design principles for single-panel product safety labels
90.20 65.060.80
01.080.20
ISO/TC 23/SC 14
ISO 17101-1:2012
Agricultural machinery -- Thrown-object test and acceptance criteria -- Part 1: Rotary mowers
60.60 65.060.01
65.060.50
65.060.70
ISO/TC 23/SC 7
ISO 17101-2:2012
Agricultural machinery -- Thrown-object test and acceptance criteria -- Part 2: Flail mowers
60.60 65.060.01
65.060.50
65.060.70
ISO/TC 23/SC 7
ISO 17103:2009
Agricultural machinery -- Rotary disc mowers, rotary drum mowers and flail mowers -- Test methods and acceptance criteria for protective skirts
60.60 65.060.01
65.060.50
65.060.70
ISO/TC 23/SC 7
ISO 17314:2008
Manually portable forest machinery -- Recyclability and recoverability -- Calculation method
90.93 65.060.80ISO/TC 23/SC 17
ISO 17532:2007
Stationary equipment for agriculture -- Data communications network for livestock farming
90.93 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 17567:2005
Agricultural and forestry tractors and implements -- Hydraulic power beyond
90.93 65.060.10ISO/TC 23/SC 4
ISO 17591:2002
Machinery for forestry -- Knuckleboom log loaders -- Identification terminology, classification and component nomenclature
90.93 65.060.80ISO/TC 23/SC 15
ISO 17612:2004
Tractors and machinery for agriculture and forestry -- Auxiliary-power-transmission connector for the operator station
90.60 65.060.10ISO/TC 23/SC 4
ISO 17900:2002
Agricultural trailers -- Balanced and semi-mounted trailers -- Determination of payload, vertical static load and axle load
90.60 65.060.10ISO/TC 23/SC 4
ISO 19472:2006
Machinery for forestry -- Winches -- Dimensions, performance and safety
90.93 65.060.80ISO/TC 23/SC 15
ISO 19472:2006/Cor 1:2006
60.60 65.060.80ISO/TC 23/SC 15
ISO 19732:2007
Equipment for crop protection -- Sprayer filters -- Colour coding for identification
90.93 65.060.40ISO/TC 23/SC 6
ISO 19932-1:2013
Equipment for crop protection -- Knapsack sprayers -- Part 1: Safety and environmental requirements
60.60 65.060.40ISO/TC 23/SC 6
ISO 19932-2:2013
Equipment for crop protection -- Knapsack sprayers -- Part 2: Test methods
60.60 65.060.40ISO/TC 23/SC 6
ISO 20019:2001
Agricultural vehicles -- Mechanical connections on towed vehicles -- Dimensions for hitch rings
90.93 65.060.10ISO/TC 23/SC 4
ISO 20019:2001/Cor 1:2004
60.60 65.060.10ISO/TC 23/SC 4
ISO 20966:2007
Automatic milking installations -- Requirements and testing
90.93 65.040.10ISO/TC 23
ISO 21244:2008
Agricultural equipment -- Mechanical connections between towed and towing vehicles -- Implement hitch rings and attachment to tractor drawbars
90.93 65.060.10ISO/TC 23/SC 4
ISO 21278-1:2008
Equipment for crop protection -- Induction hoppers -- Part 1: Test methods
90.93 65.060.40ISO/TC 23/SC 6
ISO 21278-2:2008
Equipment for crop protection -- Induction hoppers -- Part 2: General requirements and performance limits
90.93 65.060.40ISO/TC 23/SC 6
ISO 21299:2009
Powered ride-on turf care equipment -- Roll-over protective structures (ROPS) -- Test procedures and acceptance criteria
90.20 65.060.70ISO/TC 23/SC 13
ISO 21628:2008
Gardening machinery -- Powered material-collecting systems -- Safety
90.93 65.060.70ISO/TC 23/SC 13
ISO 22368-1:2004
Crop protection equipment -- Test methods for the evaluation of cleaning systems -- Part 1: Internal cleaning of complete sprayers
90.93 65.060.40ISO/TC 23/SC 6
ISO 22368-2:2004
Crop protection equipment -- Test methods for the evaluation of cleaning systems -- Part 2: External cleaning of sprayers
90.93 65.060.40ISO/TC 23/SC 6
ISO 22368-3:2004
Crop protection equipment -- Test methods for the evaluation of cleaning systems -- Part 3: Internal cleaning of tank
90.93 65.060.40ISO/TC 23/SC 6
ISO 22369-1:2006
Crop protection equipment -- Drift classification of spraying equipment -- Part 1: Classes
90.20 65.060.40ISO/TC 23/SC 6
ISO 22369-2:2010
Crop protection equipment -- Drift classification of spraying equipment -- Part 2: Classification of field crop sprayers by field measurements
90.20 65.060.40ISO/TC 23/SC 6
ISO 22522:2007
Crop protection equipment -- Field measurement of spray distribution in tree and bush crops
90.93 65.060.40ISO/TC 23/SC 6
ISO 22763:2006
Equipment for crop protection -- Sprayers -- Demonstration track for field crop sprayers
90.20 65.060.40ISO/TC 23/SC 6
ISO 22856:2008
Equipment for crop protection -- Methods for the laboratory measurement of spray drift -- Wind tunnels
90.93 65.060.40ISO/TC 23/SC 6
ISO 22866:2005
Equipment for crop protection -- Methods for field measurement of spray drift
90.93 65.060.40ISO/TC 23/SC 6
ISO 22867:2011
Forestry and gardening machinery -- Vibration test code for portable hand-held machines with internal combustion engine -- Vibration at the handles
60.60 13.160
65.060.80
ISO/TC 23/SC 17
ISO 22868:2011
Forestry and gardening machinery -- Noise test code for portable hand-held machines with internal combustion engine -- Engineering method (Grade 2 accuracy)
60.60 13.140
65.060.80
17.140.20
ISO/TC 23/SC 17
ISO 23205:2006
Agricultural tractors -- Instructional seat
90.92 65.060.10ISO/TC 23/SC 4
ISO 23206:2005
Agricultural wheeled tractors and attachments -- Front loaders -- Carriages for attachments
90.93 65.060.10ISO/TC 23/SC 4
ISO 23206:2005/Cor 1:2007
60.60 65.060.10ISO/TC 23/SC 4
ISO 24347:2005
Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Dimensions of ball-type coupling device (80 mm)
90.93 65.060.10ISO/TC 23/SC 4
ISO 24631-1:2009
Radiofrequency identification of animals -- Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)
90.92 65.040.99ISO/TC 23/SC 19
ISO 24631-2:2009
Radiofrequency identification of animals -- Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785
90.92 65.040.99ISO/TC 23/SC 19
ISO 24631-3:2009
Radiofrequency identification of animals -- Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785
90.92 65.040.99ISO/TC 23/SC 19
ISO 24631-4:2009
Radiofrequency identification of animals -- Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785
90.92 65.040.99ISO/TC 23/SC 19
ISO 24631-6:2011
Radiofrequency identification of animals -- Part 6: Representation of animal identification information (visual display/data transfer)
60.60 65.040.99ISO/TC 23/SC 19
ISO 24631-7:2012
Radiofrequency identification of animals -- Part 7: Synchronization of ISO 11785 identification systems
60.60 65.040.99ISO/TC 23/SC 19
ISO 25119-1:2010
Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 1: General principles for design and development
60.60 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 25119-2:2010
Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 2: Concept phase
60.60 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 25119-3:2010
Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 3: Series development, hardware and software
60.60 65.060.01
35.240.99
ISO/TC 23/SC 19
ISO 25119-4:2010
Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 4: Production, operation, modification and supporting processes
60.60 35.240.99
65.060.01
ISO/TC 23/SC 19
ISO 26322-1:2008
Tractors for agriculture and forestry -- Safety -- Part 1: Standard tractors
90.93 65.060.10ISO/TC 23/SC 4
ISO 26322-2:2010
Tractors for agriculture and forestry -- Safety -- Part 2: Narrow-track and small tractors
60.60 65.060.10ISO/TC 23/SC 4
ISO 26402:2008
Agricultural vehicles -- Steering systems for agricultural trailers -- Interface for articulated steering device of semi-mounted trailers
90.93 65.060.10ISO/TC 23/SC 4
ISO 27850:2013
Tractors for agriculture and forestry -- Falling object protective structures -- Test procedures and performance requirements
60.60 65.060.10ISO/TC 23/SC 2
ISO 28139:2009
Agricultural and forestry machinery -- Knapsack combustion-engine-driven mistblowers -- Safety requirements
90.20 65.060.40ISO/TC 23/SC 6
ISO/TS 28923:2012
Agricultural machinery -- Guards for moving parts of power transmission -- Guard opening with tool
60.60 65.060.01ISO/TC 23/SC 3
ISO/TS 28924:2007
Agricultural machinery - Guards for moving parts of power transmission - Guard opening without tool
90.60 65.060.01ISO/TC 23/SC 3