Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 337:1981 Road vehicles -- 50 semi-trailer fifth wheel coupling pin -- Basic and mounting/interchangeability dimensions | 90.92 | 43.040.70 |
| ISO 337:1981/Cor 1:1990 | 60.60 | 43.040.70 |
| ISO 1102:2001 Commercial road vehicles -- 50 mm drawbar eye -- Interchangeability | 90.60 | 43.040.70 |
| ISO 1726-1:2000/Cor 1:2007 | 60.60 | 43.040.70 |
| ISO 1726-1:2000 Road vehicles -- Mechanical coupling between tractors and semi-trailers -- Part 1: Interchangeability between tractors and semi-trailers for general cargo | 90.60 | 43.040.70 |
| ISO 1726-2:2007 Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers | 90.60 | 43.040.70 |
| ISO 1726-3:2010 Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 3: Requirements for semi-trailer contact area to fifth wheel | 60.60 | 43.040.70 |
| ISO 3584:2001 Road vehicles -- Drawbar couplings -- Interchangeability | 90.60 | 43.040.70 |
| ISO 3842:2006 Road vehicles -- Fifth wheels -- Interchangeability | 90.60 | 43.040.70 |
| ISO 4009:2000 Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers | 90.60 | 43.040.10 |
| ISO 4086:2001 Road vehicles -- 90 semi-trailer fifth wheel kingpin -- Interchangeability | 90.60 | 43.040.70 |
| ISO 7646:1986 Commercial vehicles and buses -- Gearbox flanges -- Type A | 90.92 | 43.040.50 |
| ISO 7647:1986 Commercial vehicles and buses -- Gearbox flanges -- Type S | 90.60 | 43.040.50 |
| ISO 7648:1987 Flywheel housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances | 90.60 | 43.060.10 |
| ISO 7649:1991 Clutch housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances | 90.60 | 43.040.50 |
| ISO 7650:1987 Commercial vehicles and buses -- Mounting dimensions for starter motors of types 1, 2, 3 and 4 | 90.92 | 43.060.50 |
| ISO 7650:1987/Amd 1:2001 | 60.60 | 43.060.50 |
| ISO 7651:1991 Commercial vehicles and buses -- Mounting dimensions for alternators of types 1, 2 and 3 | 90.60 | 43.060.50 |
| ISO 7652:1983/Amd 1:1992 | 60.60 | 43.060.20 |
| ISO 7653:1985 Road vehicles -- Commercial vehicles -- Couplings between power take-offs (PTO) and ancillary driven units | 90.92 | 43.040.50 |
| ISO 7707:1986 Commercial road vehicles -- Connections for rear-mounted power take-offs (PTO) | 90.60 | 43.040.50 |
| ISO 7803:1987 Commercial road vehicles -- Steering ball joints | 90.60 | 43.040.50 |
| ISO 7804:1985 Commercial road vehicles -- Side openings for truck power take-offs | 90.60 | 43.040.50 |
| ISO 8035:1991 Commercial road vehicles and buses over 3,5 t -- Front towing attachments | 90.60 | 43.040.70 |
| ISO 8123:1991 Road vehicles -- Diametral pitch starter motor pinions | 90.60 | 43.060.50 |
| ISO 8667:1992 Commercial vehicles and buses -- Cross-tooth gearbox flanges, type T | 90.60 | 43.040.50 |
| ISO 8716:2001 Road vehicles -- Fifth wheel kingpins -- Strength test | 90.60 | 43.040.70 |
| ISO 8717:2000 Commercial road vehicles -- Fifth wheel couplings -- Strength tests | 90.60 | 43.040.70 |
| ISO 8718:2001 Road vehicles -- Drawbar couplings and eyes for hinged drawbars -- Strength tests | 90.60 | 43.040.70 |
| ISO 8755:2001 Commercial road vehicles -- 40 mm drawbar eye -- Interchangeability | 90.60 | 43.040.70 |
| ISO 9457-1:1991 Road vehicles -- Metric starter motor pinions -- Part 1: Currently used pinions | 90.60 | 43.060.50 |
| ISO 9457-2:1994 Road vehicles -- Metric starter motor pinions -- Part 2: Pinions with 20 degree pressure angle | 90.60 | 43.060.50 |
| ISO 11055:1996 Flywheels for reciprocating internal combustion engines -- Installation dimensions for clutches | 90.60 | 43.060.10 |
| ISO 11406:2001 Commercial road vehicles -- Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers -- Interchangeability | 90.60 | 43.040.70 |
| ISO 11406:2001/Cor 1:2005 | 60.60 | 43.040.70 |
| ISO 11407:2004 Commercial road vehicles -- Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers -- Interchangeability | 90.60 | 43.040.70 |
| ISO 12357-1:1999/Cor 1:2007 | 60.60 | 43.040.70 |
| ISO 12357-1:1999 Commercial road vehicles -- Drawbar couplings and eyes for rigid drawbars -- Part 1: Strength tests for general cargo centre-axle trailers | 90.60 | 43.040.70 |
| ISO 12357-2:2007 Commercial road vehicles -- Drawbar couplings and eyes for rigid drawbars -- Part 2: Strength tests for special applications | 90.60 | 43.040.70 |
| ISO 12667:1993 Commercial vehicles and buses -- Cross-tooth propeller shaft flanges, type T | 90.60 | 43.040.50 |
| ISO 13044-1:2012 Road vehicles -- 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations -- Part 1: General requirements and definitions | 60.60 | 43.040.70 |
| ISO 13044-2 Road vehicles -- Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations -- Part 2: 50 mm fifth wheel couplings -- Electrical and pneumatic interface | 60.00 | 43.040.70 |
| ISO 18868 Commercial road vehicles -- Coupling equipment between vehicles in multiple vehicle combinations -- Strength requirements | 60.00 | 43.040.70 |
| ISO/TS 20825:2003 Road vehicles -- Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes -- Wear limits for in-use mechanical couplings | 90.60 | 43.040.70 |
| ISO/PAS 21308-1:2007 Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 1: General principles | 90.60 | 43.080.01 |
| ISO 21308-2:2006 Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 2: Dimensional bodywork exchange parameters | 90.60 | 43.080.01 |
| ISO 21308-3:2007 Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 3: General, mass and administrative exchange parameters | 90.60 | 43.080.01 |
| ISO/TS 21308-4:2007 Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 4: Mapping to STEP application protocol 239 | 90.60 | 43.080.01 |
| ISO/PRF 21308-5 Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) -- Part 5: Coding of loader crane bodywork | 50.00 | 43.080.01 |
