Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 2697:1999 Diesel engines -- Fuel nozzles -- Size "S" | 90.93 | 43.060.40 |
| ISO 2698:2013 Diesel engines -- Clamp-mounted fuel injectors, types 7 and 28 | 60.60 | 43.060.40 |
| ISO 2699:1994 Diesel engines -- Flange-mounted fuel injectors, size "S" -- Types 2, 3, 4, 5 and 6 | 90.93 | 43.060.40 |
| ISO 2974:2013 Diesel engines -- 60 degree female cones for high-pressure fuel injection components | 60.60 | 43.060.40 |
| ISO 3539:1975 Road vehicles -- Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11 | 90.93 | 43.060.40 |
| ISO 4008-1:1980 Road vehicles -- Fuel injection pump testing -- Part 1: Dynamic conditions | 90.93 | 43.060.40 |
| ISO 4008-2:1983 Road vehicles -- Fuel injection pump testing -- Part 2: Static conditions | 90.93 | 43.060.40 |
| ISO 4008-3:1987 Road vehicles -- Fuel injection pump testing -- Part 3: Application and test procedures | 90.92 | 43.060.40 |
| ISO 4008-3:1987/Amd 1:2002 | 60.60 | 43.060.40 |
| ISO 4010:1998 Diesel engines -- Calibrating nozzle, delay pintle type | 90.93 | 43.180 |
| ISO 4020:2001 Road vehicles -- Fuel filters for diesel engines -- Test methods | 90.93 | 43.060.40 |
| ISO 4093:1999 Diesel engines -- Fuel injection pumps -- High-pressure pipes for testing | 90.93 | 43.060.40 |
| ISO 4113:2010 Road vehicles -- Calibration fluids for diesel injection equipment | 60.60 | 43.180 |
| ISO 5011:2000 Inlet air cleaning equipment for internal combustion engines and compressors -- Performance testing | 90.60 | 43.060.20 |
| ISO 6415:2005 Internal combustion engines -- Spin-on filters for lubricating oil -- Dimensions | 90.20 | 43.060.30 |
| ISO 6519:2004 Diesel engines -- Fuel injection pumps -- Tapers for shaft ends and hubs | 90.92 | 43.060.40 |
| ISO 7026:1997 Diesel engines -- Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" | 90.20 | 43.060.40 |
| ISO 7030:1987 Road vehicles -- Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 | 90.93 | 43.060.40 |
| ISO 7299-1:2007 Diesel engines -- End-mounting flanges for pumps -- Part 1: Fuel injection pumps | 90.93 | 43.060.40 |
| ISO 7299-2:2009 Diesel engines -- End-mounting flanges for pumps -- Part 2: High-pressure supply pumps for common rail fuel injection systems | 90.93 | 43.060.40 |
| ISO 7310:1993 Diesel engines -- Heads for spin-on fuel filters with horizontal flange -- Mounting and connecting dimensions | 90.93 | 43.060.40 |
| ISO 7311:1993 Diesel engines -- Heads for fuel filters with vertical flange -- Mounting and connecting dimensions | 90.93 | 43.060.40 |
| ISO 7440-1:1991 Road vehicles -- Fuel injection equipment testing -- Part 1: Calibrating nozzle and holder assemblies | 90.92 | 43.180 43.060.40 |
| ISO 7440-2:1991 Road vehicles -- Fuel injection equipment testing -- Part 2: Orifice plate flow-measurement | 90.93 | 43.060.40 |
| ISO 7576:1990 Road vehicles -- Two-stage fuel filters for compression-ignition engines -- Mounting and connecting dimensions | 90.93 | 43.060.40 |
| ISO 7612:2009 Diesel engines -- Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems -- Mounting dimensions | 90.93 | 43.060.40 |
| ISO 7654:1998 Road vehicles -- Spin-on fuel filters for diesel engines -- Mounting and connecting dimensions | 90.93 | 43.060.40 |
| ISO 7747:1983 Road vehicles -- Filter elements for full flow oil filters -- Dimensions | 90.93 | 43.060.30 |
| ISO 7750-1:1992 Commercial vehicles -- Dimensions of air filter elements -- Part 1: Types A and B | 90.93 | 43.060.20 |
| ISO 7750-2:1984 Road vehicles -- Air filter elements for commercial vehicles -- Dimensions -- Part 2: Types C and D | 90.93 | 43.060.20 |
| ISO 7876-1:1990 Fuel injection equipment -- Vocabulary -- Part 1: Fuel injection pumps | 90.93 | 43.060.40 01.040.43 |
| ISO 7876-1:1990/Amd 1:1999 | 60.60 | 43.060.40 01.040.43 |
| ISO 7876-2:1991 Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors | 90.93 | 43.060.40 01.040.43 |
| ISO 7876-2:1991/Amd 1:1999 | 60.60 | 43.060.40 01.040.43 |
| ISO 7876-3:1993 Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors | 90.93 | 43.060.40 01.040.43 |
| ISO 7876-4:2004 Fuel injection equipment -- Vocabulary -- Part 4: High-pressure pipes and end-connections | 90.60 | 01.040.43 43.060.40 |
| ISO 7876-5:2004 Fuel injection equipment -- Vocabulary -- Part 5: Common rail fuel injection system | 90.60 | 43.060.40 01.040.43 |
| ISO 7879:1997 Diesel engines -- Cradle-mounted in-line fuel injection pumps -- Mounting dimensions | 90.20 | 43.060.40 |
| ISO 8356:1984 Road vehicles -- Diesel engines -- Screw-in injector, type 22 | 90.93 | 43.060.40 |
| ISO 8535-1:2011 Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 1: Requirements for seamless cold-drawn single-wall tubes | 60.60 | 43.060.40 |
| ISO 8535-2:2003 Compression-ignition engines -- Steel tubes for high-pressure fuel injection pipes -- Part 2: Requirements for composite tubes | 90.20 | 43.060.40 |
| ISO 8984-1:1993 Diesel engines -- Testing of fuel injectors -- Part 1: Hand-lever-operated testing and setting apparatus | 90.93 | 43.180 |
| ISO 8984-2:1993 Diesel engines -- Testing of fuel injectors -- Part 2: Test methods | 90.93 | 43.060.40 |
| ISO 9102:1997 Diesel engines -- Screw-in injection nozzle holders, types 24, 25, 26 and 26.1 | 90.20 | 43.060.40 |
| ISO 9103:1987 Road vehicles -- Compression-ignition engines -- Screw-in injection nozzle holder, type 23 | 90.93 | 43.060.40 |
| ISO/TS 11155-1:2001 Road vehicles -- Air filters for passenger compartments -- Part 1: Test for particulate filtration | 60.60 | 43.040.60 |
| ISO 11155-2:2009 Road vehicles -- Air filters for passenger compartments -- Part 2: Test for gaseous filtration | 90.93 | 43.040.60 |
| ISO 11841-1:2000 Road vehicles and internal combustion engines -- Filter vocabulary -- Part 1: Definitions of filters and filter components | 90.93 | 43.060.20 43.060.40 43.060.30 01.040.43 |
| ISO 11841-2:2000 Road vehicles and internal combustion engines -- Filter vocabulary -- Part 2: Definitions of characteristics of filters and their components | 90.93 | 01.040.43 43.060.20 43.060.40 43.060.30 |
| ISO/CD 12103-1 Road vehicles -- Test dust for filter evaluation -- Part 1: Arizona test dust | 30.00 | 43.060.40 43.060.20 |
| ISO 12103-1:1997 Road vehicles -- Test dust for filter evaluation -- Part 1: Arizona test dust | 90.92 | 43.060.40 43.060.20 |
| ISO 12103-2:1997 Road vehicles -- Test dust for filter evaluation -- Part 2: Aluminium oxide test dust | 90.20 | 43.060.40 43.060.20 |
| ISO 12156-1:2006 Diesel fuel -- Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -- Part 1: Test method | 90.93 | 75.160.20 |
| ISO 12156-2:2007 Diesel fuel -- Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -- Part 2: Limit | 90.93 | 75.160.20 |
| ISO 12251:2011 Diesel engines -- Clamp mounted CR fuel injectors -- Mounting dimensions | 60.60 | 43.060.40 |
| ISO 12345:2013 Diesel engines -- Cleanliness assessment of fuel injection equipment | 60.60 | 43.060.40 |
| ISO 13296:2012 Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions | 60.60 | 43.060.40 |
| ISO 13555-1:2003 Diesel engines -- Procedure for checking the dynamic timing of diesel fuel injection equipment -- Part 1: Preconditioning | 90.20 | 43.060.40 |
| ISO 13555-2:2003 Diesel engines -- Procedure for checking the dynamic timing of diesel fuel injection equipment -- Part 2: Test method | 90.20 | 43.060.40 |
| ISO 13555-3:2004 Diesel engines -- Procedure for checking the dynamic timing of diesel fuel injection equipment -- Part 3: Validation of timing measurement devices | 95.20 | 43.060.40 |
| ISO 13948-1:2000 Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 1: Threaded connections | 90.92 | 43.060.40 |
| ISO/NP 13948-1 Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 1: Threaded connections | 10.99 | 43.060.40 |
| ISO 13948-2:2012 Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 2: Non-threaded (push-on) connections | 60.60 | 43.060.40 |
| ISO 14681:1998 Diesel engines -- Fuel injection pump testing -- Calibrating fuel injectors | 90.93 | 43.060.40 |
| ISO/CD 16332 Road vehicles -- Water separation efficiency of fuel filter systems for diesel engine application | 30.60 | 43.060.40 |
| ISO/TS 16332:2006 Diesel engines -- Fuel filters -- Method for evaluating fuel/water separation efficiency | 90.93 | 43.060.40 |
| ISO/CD 18418-1 Gasoline engines -- Medium pressure liquid fuel supply connections -- Part 1: 60° female cone connectors | 30.99 | 43.060.40 |
| ISO/CD 18418-2 Gasoline engines -- Medium pressure liquid fuel supply connections -- Part 2: Pipe assemblies | 30.99 | 43.060.40 |
| ISO 19438:2003 Diesel fuel and petrol filters for internal combustion engines -- Filtration efficiency using particle counting and contaminant retention capacity | 90.93 | 43.060.40 |
| ISO/TS 19713-1:2010 Road vehicles -- Inlet air cleaning equipment for internal combustion engines and compressors -- Part 1: Fractional efficiency testing with fine particles (0,3 µm to 5 µm optical diameter) | 60.60 | 43.060.20 |
| ISO/TS 19713-2:2010 Road vehicles -- Inlet air cleaning equipment for internal combustion engines and compressors -- Part 2: Fractional efficiency testing with coarse particles (5 µm to 40 µm optical diameter) | 60.60 | 43.060.20 |
