Home

Standards catalogue

Subscribe to updates

ISO/TC 22  - Road vehicles

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 22 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 337:1981
Road vehicles -- 50 semi-trailer fifth wheel coupling pin -- Basic and mounting/interchangeability dimensions
90.20 43.040.70ISO/TC 22/SC 15
ISO 337:1981/Cor 1:1990
60.60 43.040.70ISO/TC 22/SC 15
ISO 611:2003
Road vehicles -- Braking of automotive vehicles and their trailers -- Vocabulary
90.60 01.040.43
43.040.40
ISO/TC 22/SC 2
ISO 612:1978
Road vehicles -- Dimensions of motor vehicles and towed vehicles -- Terms and definitions
90.93 43.020
01.040.43
ISO/TC 22
ISO 1102:2001
Commercial road vehicles -- 50 mm drawbar eye -- Interchangeability
90.60 43.040.70ISO/TC 22/SC 15
ISO 1103:2007
Road vehicles -- Coupling balls for caravans and light trailers -- Dimensions
90.93 43.040.70ISO/TC 22/SC 4
ISO 1176:1990
Road vehicles -- Masses -- Vocabulary and codes
90.93 43.020
01.040.43
ISO/TC 22
ISO 1185:2003
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
90.20 43.040.10ISO/TC 22/SC 3
ISO 1585:1992
Road vehicles -- Engine test code -- Net power
90.93 43.060.01ISO/TC 22/SC 5
ISO 1724:2003
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
90.20 43.040.10ISO/TC 22/SC 3
ISO 1726-1:2000/Cor 1:2007
60.60 43.040.70ISO/TC 22/SC 15
ISO 1726-1:2000
Road vehicles -- Mechanical coupling between tractors and semi-trailers -- Part 1: Interchangeability between tractors and semi-trailers for general cargo
90.60 43.040.70ISO/TC 22/SC 15
ISO 1726-2:2007
Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers
90.60 43.040.70ISO/TC 22/SC 15
ISO 1726-3:2010
Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 3: Requirements for semi-trailer contact area to fifth wheel
60.60 43.040.70ISO/TC 22/SC 15
ISO 1728:2006
Road vehicles -- Pneumatic braking connections between motor vehicles and towed vehicles -- Interchangeability
90.60 43.040.40ISO/TC 22/SC 2
ISO 2416:1992
Passenger cars -- Mass distribution
90.60 43.100ISO/TC 22
ISO 2534:1998
Road vehicles -- Engine test code -- Gross power
90.60 43.060.01ISO/TC 22/SC 5
ISO 2575:2010
Road vehicles -- Symbols for controls, indicators and tell-tales
60.60 43.040.30
01.080.20
ISO/TC 22/SC 13
ISO 2575:2010/Amd 1:2011
60.60 43.040.30
01.080.20
ISO/TC 22/SC 13
ISO 2575:2010/Amd 3:2014
60.60 43.040.30
01.080.20
ISO/TC 22/SC 13
ISO 2697:1999
Diesel engines -- Fuel nozzles -- Size "S"
90.60 43.060.40ISO/TC 22/SC 7
ISO 2698:2013
Diesel engines -- Clamp-mounted fuel injectors, types 7 and 28
60.60 43.060.40ISO/TC 22/SC 7
ISO 2699:1994
Diesel engines -- Flange-mounted fuel injectors, size "S" -- Types 2, 3, 4, 5 and 6
90.93 43.060.40ISO/TC 22/SC 7
ISO 2958:1973
Road vehicles -- Exterior protection for passenger cars
90.93 43.040.80ISO/TC 22
ISO 2974:2013
Diesel engines -- 60 degree female cones for high-pressure fuel injection components
60.60 43.060.40ISO/TC 22/SC 7
ISO 3006:2005
Road vehicles -- Passenger car wheels for road use -- Test methods
90.92 43.040.50ISO/TC 22/SC 19
ISO 3208:1974
Road vehicles -- Evaluation of protrusions inside passenger cars
90.93 43.040.60
43.040.80
ISO/TC 22
ISO 3409:1975
Passenger cars -- Lateral spacing of foot controls
90.93 43.040.30ISO/TC 22/SC 13
ISO 3412:1992
Road vehicles -- Screened and waterproof spark-plugs and their connections -- Types 1A and 1B
90.93 43.060.50ISO/TC 22/SC 1
ISO 3468:2014
Passenger cars -- Windscreen defrosting and demisting systems -- Test method
60.60 43.040.65ISO/TC 22/SC 17
ISO 3469:1989
Passenger cars -- Windscreen washing systems -- Test methods
90.93 43.040.65ISO/TC 22/SC 17
ISO 3469:1989/Amd 1:2006
60.60 43.040.65ISO/TC 22/SC 17
ISO 3536:1999
Road vehicles -- Safety glazing materials -- Vocabulary
90.93 01.040.43
01.040.81
81.040.30
43.040.65
ISO/TC 22/SC 11
ISO 3537:1999
Road vehicles -- Safety glazing materials -- Mechanical tests
90.92 43.040.65
81.040.30
ISO/TC 22/SC 11
ISO 3538:1997
Road vehicles -- Safety glazing materials -- Test methods for optical properties
90.93 81.040.30
43.040.65
ISO/TC 22/SC 11
ISO 3539:1975
Road vehicles -- Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11
90.93 43.060.40ISO/TC 22/SC 7
ISO 3553-1:1987
Road vehicles -- High-tension connections for ignition coils and distributors -- Part 1: Socket-type
90.93 43.060.50ISO/TC 22/SC 1
ISO 3553-2:1997
Road vehicles -- High-tension connectors for ignition coils and distributors -- Part 2: Plug-types
90.93 43.060.50ISO/TC 22/SC 1
ISO 3560:2013
Road vehicles -- Frontal fixed barrier or pole impact test procedure
60.60 43.020ISO/TC 22/SC 10
ISO 3583:1984
Road vehicles -- Pressure test connection for compressed-air pneumatic braking equipment
90.60 43.040.40ISO/TC 22/SC 2
ISO 3584:2001
Road vehicles -- Drawbar couplings -- Interchangeability
90.60 43.040.70ISO/TC 22/SC 15
ISO 3731:2003
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage
90.20 43.040.10ISO/TC 22/SC 3
ISO 3732:2003
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage
90.20 43.040.10ISO/TC 22/SC 3
ISO 3779:2009
Road vehicles -- Vehicle identification number (VIN) -- Content and structure
90.60 43.020ISO/TC 22
ISO 3780:2009
Road vehicles -- World manufacturer identifier (WMI) code
90.60 43.020ISO/TC 22
ISO 3780:2009/Cor 1:2010
60.60 43.020ISO/TC 22
ISO 3784:1976
Road vehicles -- Measurement of impact velocity in collision tests
90.93 43.020ISO/TC 22/SC 12
ISO 3795:1989
Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
90.93 13.220.40
65.060.01
43.020
ISO/TC 22
ISO 3803:1984
Road vehicles -- Hydraulic pressure test connection for braking equipment
90.93 43.040.40ISO/TC 22/SC 2
ISO 3808:2002
Road vehicles -- Unscreened high-voltage ignition cables -- General specifications, test methods and requirements
90.93 43.060.50ISO/TC 22/SC 1
ISO 3832:2002
Passenger cars -- Luggage compartments -- Method of measuring reference volume
90.93 43.040.60ISO/TC 22
ISO 3833:1977
Road vehicles -- Types -- Terms and definitions
90.93 43.020
01.040.43
ISO/TC 22
ISO 3842:2006
Road vehicles -- Fifth wheels -- Interchangeability
90.60 43.040.70ISO/TC 22/SC 15
ISO 3853:1994
Road vehicles -- Towing vehicle coupling device to tow caravans or light trailers -- Mechanical strength test
90.93 43.040.70ISO/TC 22/SC 4
ISO 3871:2000
Road vehicles -- Labelling of containers for petroleum-based or non-petroleum-based brake fluid
90.93 75.120
43.040.40
ISO/TC 22/SC 2
ISO 3888-1:1999
Passenger cars -- Test track for a severe lane-change manoeuvre -- Part 1: Double lane-change
90.60 43.100
43.180
ISO/TC 22/SC 9
ISO 3888-2:2011
Passenger cars -- Test track for a severe lane-change manoeuvre -- Part 2: Obstacle avoidance
60.60 43.100
43.180
ISO/TC 22/SC 9
ISO 3894:2005
Road vehicles -- Wheels/rims for commercial vehicles -- Test methods
90.92 43.040.50ISO/TC 22/SC 19
ISO 3895:1986
Road vehicles -- Screened and waterproof spark-plug and its connection -- Type 2
90.93 43.060.50ISO/TC 22/SC 1
ISO 3896:1986
Road vehicles -- Screened and waterproof spark-plug and its connection -- Type 3
90.93 43.060.50ISO/TC 22/SC 1
ISO 3911:2004
Wheels and rims for pneumatic tyres -- Vocabulary, designation and marking
90.93 43.040.50
01.040.43
ISO/TC 22/SC 19
ISO 3917:1999
Road vehicles -- Safety glazing materials -- Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
90.92 43.040.65
81.040.30
ISO/TC 22/SC 11
ISO 3929:2003
Road vehicles -- Measurement methods for exhaust gas emissions during inspection or maintenance
90.93 43.060.20
13.040.50
ISO/TC 22/SC 5
ISO/PAS 3930:2009
Instruments for measuring vehicle exhaust emissions -- Metrological and technical requirements; Metrological control and performance tests
60.60 13.040.50
43.180
ISO/TC 22/SC 5
ISO 3958:1996
Passenger cars -- Driver hand-control reach
90.93 43.040.30ISO/TC 22/SC 13
ISO 3984:2004
Road vehicles -- Rear moving barrier impact test procedure
90.93 43.100ISO/TC 22/SC 10
ISO 3996:1995
Road vehicles -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
90.20 43.040.40
83.140.40
ISO/TC 22/SC 2
ISO 4008-1:1980
Road vehicles -- Fuel injection pump testing -- Part 1: Dynamic conditions
90.93 43.060.40ISO/TC 22/SC 7
ISO 4008-2:1983
Road vehicles -- Fuel injection pump testing -- Part 2: Static conditions
90.93 43.060.40ISO/TC 22/SC 7
ISO 4008-3:1987
Road vehicles -- Fuel injection pump testing -- Part 3: Application and test procedures
90.20 43.060.40ISO/TC 22/SC 7
ISO 4008-3:1987/Amd 1:2002
60.60 43.060.40ISO/TC 22/SC 7
ISO 4009:2000
Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers
90.60 43.040.10ISO/TC 22/SC 15
ISO 4010:1998
Diesel engines -- Calibrating nozzle, delay pintle type
90.60 43.180ISO/TC 22/SC 7
ISO 4020:2001
Road vehicles -- Fuel filters for diesel engines -- Test methods
90.93 43.060.40ISO/TC 22/SC 7
ISO 4024:1992
Road vehicles -- Ignition coils -- Low-tension cable connections
90.93 43.060.50ISO/TC 22/SC 1
ISO 4030:1983
Road vehicles -- Vehicle identification number (VIN) -- Location and attachment
90.60 43.020ISO/TC 22
ISO 4038:1996
Road vehicles -- Hydraulic braking systems -- Simple flare pipes, tapped holes, male fittings and hose end fittings
90.60 43.040.40
83.140.40
ISO/TC 22/SC 2
ISO 4039-1:1998
Road vehicles -- Pneumatic braking systems -- Part 1: Pipes, male fittings and tapped holes with facial sealing surface
90.60 43.040.40ISO/TC 22/SC 2
ISO 4039-2:1998
Road vehicles -- Pneumatic braking systems -- Part 2: Pipes, male fittings and holes with conical sealing surface
90.60 43.040.40ISO/TC 22/SC 2
ISO 4040:2009
Road vehicles -- Location of hand controls, indicators and tell-tales in motor vehicles
90.93 43.040.30ISO/TC 22/SC 13
ISO 4082:1981
Road vehicles -- Motor vehicles -- Flasher units
90.93 43.040.20ISO/TC 22/SC 8
ISO 4086:2001
Road vehicles -- 90 semi-trailer fifth wheel kingpin -- Interchangeability
90.60 43.040.70ISO/TC 22/SC 15
ISO 4091:2003
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Definitions, tests and requirements
90.20 43.040.10ISO/TC 22/SC 3
ISO 4093:1999
Diesel engines -- Fuel injection pumps -- High-pressure pipes for testing
90.60 43.060.40ISO/TC 22/SC 7
ISO 4100:1980
Road vehicles -- World parts manufacturer identifier (WPMI) code
90.93 43.020ISO/TC 22
ISO 4106:2012
Motorcycles -- Engine test code -- Net power
60.60 43.140ISO/TC 22/SC 22
ISO 4107:2010
Commercial vehicles -- Wheel-hub attachment dimensions
60.60 43.040.50ISO/TC 22/SC 19
ISO 4113:2010
Road vehicles -- Calibration fluids for diesel injection equipment
60.60 43.180ISO/TC 22/SC 7
ISO 4129:2012
Road vehicles -- Mopeds -- Symbols for controls, indicators and tell-tales
60.60 43.140
01.080.20
ISO/TC 22/SC 23
ISO 4130:1978
Road vehicles -- Three-dimensional reference system and fiducial marks -- Definitions
90.60 43.020
01.040.43
ISO/TC 22
ISO 4131:1979
Road vehicles -- Dimensional codes for passenger cars
90.93 43.100ISO/TC 22
ISO 4138:2012
Passenger cars -- Steady-state circular driving behaviour -- Open-loop test methods
60.60 43.100ISO/TC 22/SC 9
ISO 4141-1:2005
Road vehicles -- Multi-core connecting cables -- Part 1: Test methods and requirements for basic performance sheathed cables
90.20 43.040.10ISO/TC 22/SC 3
ISO 4141-2:2006
Road vehicles -- Multi-core connecting cables -- Part 2: Test methods and requirements for high performance sheathed cables
90.20 43.040.10ISO/TC 22/SC 3
ISO 4141-3:2006
Road vehicles -- Multi-core connecting cables -- Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
90.20 43.040.10ISO/TC 22/SC 3
ISO 4141-4:2009
Road vehicles -- Multi-core connecting cables -- Part 4: Test methods and requirements for coiled cable assemblies
90.93 43.040.10ISO/TC 22/SC 3
ISO 4148:2004
Road vehicles -- Special warning lamps -- Dimensions
90.60 43.040.20ISO/TC 22/SC 8
ISO 4151:1987
Road vehicles -- Mopeds -- Type, location and functions of controls
90.93 43.140ISO/TC 22/SC 23
ISO 4164:2012
Mopeds -- Engine test code -- Net power
60.60 43.140ISO/TC 22/SC 23
ISO 4165:2001
Road vehicles -- Electrical connections -- Double-pole connection
90.93 43.040.10ISO/TC 22/SC 3
ISO 4513:2010
Road vehicles -- Visibility -- Method for establishment of eyellipses for driver's eye location
60.60 43.020ISO/TC 22/SC 17
ISO 4925:2005
Road vehicles -- Specification of non-petroleum-base brake fluids for hydraulic systems
90.93 43.040.40
75.120
ISO/TC 22/SC 2
ISO 4926:2006
Road vehicles -- Hydraulic braking systems -- Non-petroleum-base reference fluids
90.60 75.120
43.040.40
ISO/TC 22/SC 2
ISO 4927:2005
Road vehicles -- Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 4928:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 4929:1978
Road vehicles -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
90.93 43.040.40ISO/TC 22/SC 2
ISO 4930:2006
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
90.60 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 5011:2014
Inlet air cleaning equipment for internal combustion engines and compressors -- Performance testing
60.60 43.060.20ISO/TC 22/SC 7
ISO 5422:1982
Road vehicles -- Anchorages for towing ropes, cables or bars
90.93 43.040.70ISO/TC 22
ISO 5740:1982
Road vehicles -- Rear view mirrors -- Test method for determining reflectance
90.93 43.040.65ISO/TC 22/SC 17
ISO 5898:1997
Passenger cars -- Rear-window defrosting system -- Test method
90.93 43.040.65ISO/TC 22/SC 17
ISO 6117:2005
Road vehicles -- Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
90.60 43.040.40
83.140.50
ISO/TC 22/SC 2
ISO 6118:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
90.60 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 6119:2006
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 6120:1995
Road vehicles -- Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
90.93 43.040.40
83.140.40
ISO/TC 22/SC 2
ISO 6255:1997
Passenger cars -- Rear-window washing and wiping systems -- Test methods
90.93 43.040.65ISO/TC 22/SC 17
ISO 6310:2009
Road vehicles -- Brake linings -- Compressive strain test methods
90.60 43.040.40ISO/TC 22/SC 2
ISO 6311:1980
Road vehicles -- Brake linings -- Internal shear strength of lining material -- Test procedure
90.20 43.040.40ISO/TC 22/SC 2
ISO 6312:2010
Road vehicles -- Brake linings -- Shear test procedure for disc brake pad and drum brake shoe assemblies
60.60 43.040.40ISO/TC 22/SC 2
ISO 6313:1980
Road vehicles -- Brake linings -- Effects of heat on dimensions and form of disc brake pads -- Test procedure
90.20 43.040.40ISO/TC 22/SC 2
ISO 6314:1980
Road vehicles -- Brake linings -- Resistance to water, saline solution, oil and brake fluid -- Test procedure
90.20 43.040.40ISO/TC 22/SC 2
ISO 6315:1980
Road vehicles -- Brake linings -- Seizure to ferrous mating surface due to corrosion -- Test procedure
90.20 43.040.40ISO/TC 22/SC 2
ISO 6415:2005
Internal combustion engines -- Spin-on filters for lubricating oil -- Dimensions
90.93 43.060.30ISO/TC 22/SC 7
ISO 6460-1:2007
Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 1: General test requirements
90.93 13.040.50
43.140
ISO/TC 22/SC 22
ISO 6460-2:2007
Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 2: Test cycles and specific test conditions
90.93 13.040.50
43.140
ISO/TC 22/SC 22
ISO 6460-3:2007
Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 3: Fuel consumption measurement at a constant speed
90.93 13.040.50
43.140
ISO/TC 22/SC 22
ISO 6469-1:2009
Electrically propelled road vehicles -- Safety specifications -- Part 1: On-board rechargeable energy storage system (RESS)
90.20 43.120ISO/TC 22/SC 21
ISO 6469-2:2009
Electrically propelled road vehicles -- Safety specifications -- Part 2: Vehicle operational safety means and protection against failures
90.20 43.120ISO/TC 22/SC 21
ISO 6469-3:2011
Electrically propelled road vehicles -- Safety specifications -- Part 3: Protection of persons against electric shock
60.60 43.120ISO/TC 22/SC 21
ISO 6487:2012
Road vehicles -- Measurement techniques in impact tests -- Instrumentation
90.92 43.020ISO/TC 22/SC 12
ISO 6518-1:2002
Road vehicles -- Ignition systems -- Part 1: Vocabulary
90.93 01.040.43
43.060.50
ISO/TC 22/SC 1
ISO 6518-2:1995
Road vehicles -- Ignition systems -- Part 2: Electrical performance and function test methods
90.93 43.060.50ISO/TC 22/SC 1
ISO 6518-2:1995/Cor 1:1997
60.60 43.060.50ISO/TC 22/SC 1
ISO 6519:2004
Diesel engines -- Fuel injection pumps -- Tapers for shaft ends and hubs
90.92 43.060.40ISO/TC 22/SC 7
ISO 6546:2006
Road vehicles -- Collection of accident data for evaluation of occupant restraint performance
90.60 43.020ISO/TC 22/SC 12
ISO 6550-1:1994
Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 1: M14 x 1,25 glow-plugs
90.93 43.060.50ISO/TC 22/SC 1
ISO 6550-2:1994
Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 2: M12 x 1,25 glow-plugs
90.93 43.060.50ISO/TC 22/SC 1
ISO 6550-3:2009
Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 3: M10 glow-plugs
90.92 43.060.50ISO/TC 22/SC 1
ISO 6550-3:2013
Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 3: M10 glow-plugs
60.60 43.060.50ISO/TC 22/SC 1
ISO 6550-4:2009
Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 4: M8 x 1 glow-plugs
90.92 43.060.50ISO/TC 22/SC 1
ISO 6550-4:2014
Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 4: M8 x 1 glow-plugs
60.60 43.060.50ISO/TC 22/SC 1
ISO 6597:2005
Road vehicles -- Hydraulic braking systems, including those with electronic control functions, for motor vehicles -- Test procedures
90.60 43.040.40ISO/TC 22/SC 2
ISO 6621-1:2007
Internal combustion engines -- Piston rings -- Part 1: Vocabulary
90.93 43.060.10
01.040.43
ISO/TC 22
ISO 6621-2:2003
Internal combustion engines -- Piston rings -- Part 2: Inspection measuring principles
90.93 43.060.10ISO/TC 22
ISO 6621-3:2000
Internal combustion engines -- Piston rings -- Part 3: Material specifications
90.93 43.060.10ISO/TC 22
ISO 6621-4:2003
Internal combustion engines -- Piston rings -- Part 4: General specifications
90.92 43.060.10ISO/TC 22
ISO 6621-5:2013
Internal combustion engines -- Piston rings -- Part 5: Quality requirements
60.60 43.060.10ISO/TC 22
ISO 6622-1:2003
Internal combustion engines -- Piston rings -- Part 1: Rectangular rings made of cast iron
90.93 27.020ISO/TC 22
ISO 6622-2:2013
Internal combustion engines -- Piston rings -- Part 2: Rectangular rings made of steel
60.60 43.060.10ISO/TC 22
ISO 6623:2013
Internal combustion engines -- Piston rings -- Scraper rings made of cast iron
60.60 43.060.10ISO/TC 22
ISO 6624-1:2001
Internal combustion engines -- Piston rings -- Part 1: Keystone rings made of cast iron
90.93 43.060.10ISO/TC 22
ISO 6624-2:2003
Internal combustion engines -- Piston rings -- Part 2: Half keystone rings made of cast iron
90.92 43.060.10ISO/TC 22
ISO 6624-3:2001
Internal combustion engines -- Piston rings -- Part 3: Keystone rings made of steel
90.93 43.060.10ISO/TC 22
ISO 6624-4:2003
Internal combustion engines -- Piston rings -- Part 4: Half keystone rings made of steel
90.92 43.060.10ISO/TC 22
ISO 6625:1986
Internal combustion engines -- Piston rings -- Oil control rings
90.93 43.060.10ISO/TC 22
ISO 6626:1989
Internal combustion engines -- Piston rings -- Coil-spring-loaded oil control rings
90.20 43.060.10ISO/TC 22
ISO 6626-2:2013
Internal combustion engines -- Piston rings -- Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron
60.60 43.060.10ISO/TC 22
ISO 6626-3:2008
Internal combustion engines -- Piston rings -- Part 3: Coil-spring-loaded oil control rings made of steel
90.93 43.060.10ISO/TC 22
ISO 6627:2011
Internal combustion engines -- Piston rings -- Expander/segment oil-control rings
60.60 43.060.10ISO/TC 22
ISO 6722-1:2011
Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, test methods and requirements for copper conductor cables
60.60 43.040.10ISO/TC 22/SC 3
ISO 6722-1:2011/Cor 1:2012
60.60 43.040.10ISO/TC 22/SC 3
ISO 6722-2:2013
Road vehicles -- 60 V and 600 V single-core cables -- Part 2: Dimensions, test methods and requirements for aluminium conductor cables
60.60 43.040.10ISO/TC 22/SC 3
ISO 6725:1981
Road vehicles -- Dimensions of two-wheeled mopeds and motorcycles -- Terms and definitions
90.60 43.140
01.040.43
ISO/TC 22/SC 22
ISO 6726:1988
Mopeds and motorcycles with two wheels -- Masses -- Vocabulary
90.60 43.140
01.040.43
ISO/TC 22/SC 22
ISO 6727:2012
Road vehicles -- Motorcycles -- Symbols for controls, indicators and tell-tales
60.60 43.140
01.080.20
ISO/TC 22/SC 22
ISO 6786:1980
Road vehicles -- Air braking systems -- Identification of connections on units
90.60 43.040.40ISO/TC 22/SC 2
ISO 6797:1982
Road vehicles -- Motor vehicles -- Production conformity requirements for flasher units
90.93 43.040.20ISO/TC 22/SC 8
ISO 6813:1998
Road vehicles -- Collision classification -- Terminology
90.93 43.020
01.040.43
ISO/TC 22/SC 12
ISO 6855-1:2012
Mopeds -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 1: General test requirements
60.60 43.140
13.040.50
ISO/TC 22/SC 23
ISO 6855-2:2012
Mopeds -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 2: Test cycles and specific test conditions
60.60 43.140
13.040.50
ISO/TC 22/SC 23
ISO 6855-3:2012
Mopeds -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 3: Fuel consumption measurement at a constant speed
60.60 43.140
13.040.50
ISO/TC 22/SC 23
ISO 6856:2005
Road vehicles -- Unscreened high-voltage ignition cable assemblies -- Test methods and general requirements
90.93 43.060.50ISO/TC 22/SC 1
ISO 6969:2004
Road vehicles -- Sound signalling devices -- Tests after mounting on vehicle
90.93 43.040.20ISO/TC 22/SC 3
ISO 7026:1997
Diesel engines -- Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B"
90.93 43.060.40ISO/TC 22/SC 7
ISO 7030:1987
Road vehicles -- Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19
90.93 43.060.40ISO/TC 22/SC 7
ISO 7116:2011
Mopeds -- Measurement method for determining maximum speed
60.60 43.140ISO/TC 22/SC 23
ISO 7117:2010
Motorcycles -- Measurement method for determining maximum speed
60.60 43.140ISO/TC 22/SC 22
ISO 7141:2005
Road vehicles -- Light alloy wheels -- Impact test
90.93 43.040.50ISO/TC 22/SC 19
ISO 7237:1993
Caravans -- Masses and dimensions -- Vocabulary
90.20 43.100
01.040.43
ISO/TC 22/SC 4
ISO 7237:1993/Amd 1:2001
60.60 43.100
01.040.43
ISO/TC 22
ISO 7299-1:2007
Diesel engines -- End-mounting flanges for pumps -- Part 1: Fuel injection pumps
90.93 43.060.40ISO/TC 22/SC 7
ISO 7299-2:2009
Diesel engines -- End-mounting flanges for pumps -- Part 2: High-pressure supply pumps for common rail fuel injection systems
90.93 43.060.40ISO/TC 22/SC 7
ISO 7308:1987
Road vehicles -- Petroleum-based brake-fluid for stored-energy hydraulic brakes
90.93 43.040.40
75.120
ISO/TC 22/SC 2
ISO 7309:1985
Road vehicles -- Hydraulic braking systems -- ISO reference petroleum base fluid
90.93 75.120
43.040.40
ISO/TC 22/SC 2
ISO 7310:1993
Diesel engines -- Heads for spin-on fuel filters with horizontal flange -- Mounting and connecting dimensions
90.60 43.060.40ISO/TC 22/SC 7
ISO 7311:1993
Diesel engines -- Heads for fuel filters with vertical flange -- Mounting and connecting dimensions
90.60 43.060.40ISO/TC 22/SC 7
ISO 7375-1:1986
Road vehicles -- Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles -- Part 1: Dimensions
90.60 43.040.40ISO/TC 22/SC 2
ISO 7375-2:1998
Road vehicles -- Coiled tube assemblies for air brake connection between towing and towed vehicles -- Part 2: Performance requirements
90.60 43.040.40ISO/TC 22/SC 2
ISO 7397-1:1993
Passenger cars -- Verification of driver's direct field of view -- Part 1: Vehicle positioning for static measurement
90.93 43.100ISO/TC 22/SC 17
ISO 7397-2:1993
Passenger cars -- Verification of driver's direct field of view -- Part 2: Test method
90.93 43.100ISO/TC 22/SC 17
ISO 7398:1990
Motorcycles -- Direct current flasher units
90.93 43.140ISO/TC 22/SC 22
ISO 7399:1990
Motorcycles -- Alternating current flasher units
90.93 43.140ISO/TC 22/SC 22
ISO 7400:1990
Mopeds -- Alternating current flasher units
90.93 43.140ISO/TC 22/SC 23
ISO 7401:2011
Road vehicles -- Lateral transient response test methods -- Open-loop test methods
60.60 43.020ISO/TC 22/SC 9
ISO 7440-1:1991
Road vehicles -- Fuel injection equipment testing -- Part 1: Calibrating nozzle and holder assemblies
90.93 43.180
43.060.40
ISO/TC 22/SC 7
ISO 7440-2:1991
Road vehicles -- Fuel injection equipment testing -- Part 2: Orifice plate flow-measurement
90.93 43.060.40ISO/TC 22/SC 7
ISO 7575:1993
Commercial road vehicles -- Flat attachment wheel fixing nuts
90.93 43.040.50ISO/TC 22/SC 19
ISO 7576:1990
Road vehicles -- Two-stage fuel filters for compression-ignition engines -- Mounting and connecting dimensions
90.93 43.060.40ISO/TC 22/SC 7
ISO 7578:2008
Road vehicles -- Sheath-type glow-plugs -- General requirements and test methods
90.93 43.060.50ISO/TC 22/SC 1
ISO 7588-1:1998
Road vehicles -- Electrical/electronic switching devices -- Part 1: Relays and flashers
90.20 43.040.10
43.040.20
ISO/TC 22/SC 3
ISO 7588-2:1998
Road vehicles -- Electrical/electronic switching devices -- Part 2: Electronic devices
90.20 43.040.20
43.040.10
ISO/TC 22/SC 3
ISO 7588-3:1998
Road vehicles -- Electrical/electronic switching devices -- Part 3: Microrelays
90.20 43.040.10ISO/TC 22/SC 3
ISO 7591:1982
Road vehicles -- Retro-reflective registration plates for motor vehicles and trailers -- Specification
90.93 43.040.20ISO/TC 22/SC 8
ISO 7612:2009
Diesel engines -- Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems -- Mounting dimensions
90.93 43.060.40ISO/TC 22/SC 7
ISO 7628:2010
Road vehicles -- Thermoplastics tubing for air braking systems
60.60 43.040.40
83.140.30
ISO/TC 22/SC 2
ISO 7629:1987
Road vehicles -- Brake linings -- Disc brake pads -- Evaluation of surface and material flaws after testing
90.93 43.040.40ISO/TC 22/SC 2
ISO 7630:1985
Road vehicles -- Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 7631:1985
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 7632:1985
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 7633:1985
Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93 83.140.50
43.040.40
ISO/TC 22/SC 2
ISO 7634:2007
Road vehicles -- Compressed air braking systems for towed vehicles including those with electronic braking control functions -- Test procedures
90.93 43.040.40ISO/TC 22/SC 2
ISO 7635:2006
Road vehicles -- Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions -- Test procedures
90.60 43.040.40ISO/TC 22/SC 2
ISO 7637-1:2002
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations
90.92 01.040.43
43.040.10
ISO/TC 22/SC 3
ISO 7637-1:2002/Amd 1:2008
60.60 01.040.43
43.040.10
ISO/TC 22/SC 3
ISO 7637-2:2011
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only
60.60 43.040.10ISO/TC 22/SC 3
ISO 7637-3:2007
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
90.92 43.040.10ISO/TC 22/SC 3
ISO 7638-1:2003
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage
90.20 43.040.10
43.040.40
ISO/TC 22/SC 3
ISO 7638-2:2003
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage
90.20 43.040.10
43.040.40
ISO/TC 22/SC 3
ISO 7639:1985
Road vehicles -- Diagnostic systems -- Graphical symbols
90.93 01.080.20
43.180
ISO/TC 22/SC 3
ISO 7641:2012
Road vehicles -- Trailers up to 3,5 t -- Calculation of the mechanical strength of steel drawbars
60.60 43.040.70ISO/TC 22/SC 4
ISO 7642:1991
Caravans and light trailers -- Trailers of categories 01 and 02 with overrun brakes -- Inertia bench test methods for brakes
90.93 43.040.40ISO/TC 22/SC 4
ISO 7643:1991
Caravans and light trailers -- Trailers of categories 01 and 02 with overrun brakes -- Linear bench test methods for brake controls
90.93 43.040.40ISO/TC 22/SC 4
ISO 7646:1986
Commercial vehicles and buses -- Gearbox flanges -- Type A
90.20 43.040.50ISO/TC 22/SC 15
ISO 7647:1986
Commercial vehicles and buses -- Gearbox flanges -- Type S
90.60 43.040.50ISO/TC 22/SC 15
ISO 7648:1987
Flywheel housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances
90.60 43.060.10ISO/TC 22/SC 15
ISO 7649:1991
Clutch housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances
90.60 43.040.50ISO/TC 22/SC 15
ISO 7650:1987
Commercial vehicles and buses -- Mounting dimensions for starter motors of types 1, 2, 3 and 4
90.20 43.060.50ISO/TC 22/SC 15
ISO 7650:1987/Amd 1:2001
60.60 43.060.50ISO/TC 22/SC 15
ISO 7651:1991
Commercial vehicles and buses -- Mounting dimensions for alternators of types 1, 2 and 3
90.60 43.060.50ISO/TC 22/SC 15
ISO 7652:1983/Amd 1:1992
60.60 43.060.20ISO/TC 22/SC 15
ISO 7653:1985
Road vehicles -- Commercial vehicles -- Couplings between power take-offs (PTO) and ancillary driven units
90.93 43.040.50ISO/TC 22/SC 15
ISO 7654:1998
Road vehicles -- Spin-on fuel filters for diesel engines -- Mounting and connecting dimensions
90.60 43.060.40ISO/TC 22/SC 7
ISO 7656:1993
Commercial road vehicles -- Dimensional codes
90.60 43.080.01ISO/TC 22
ISO 7707:1986
Commercial road vehicles -- Connections for rear-mounted power take-offs (PTO)
90.60 43.040.50ISO/TC 22/SC 15
ISO 7736:1984
Road vehicles -- Car radio for front installation -- Installation space including connections
90.60 43.040.15ISO/TC 22
ISO 7747:1983
Road vehicles -- Filter elements for full flow oil filters -- Dimensions
90.20 43.060.30ISO/TC 22/SC 7
ISO 7750-1:1992
Commercial vehicles -- Dimensions of air filter elements -- Part 1: Types A and B
90.93 43.060.20ISO/TC 22/SC 7
ISO 7750-2:1984
Road vehicles -- Air filter elements for commercial vehicles -- Dimensions -- Part 2: Types C and D
90.93 43.060.20ISO/TC 22/SC 7
ISO 7803:1987
Commercial road vehicles -- Steering ball joints
90.60 43.040.50ISO/TC 22/SC 15
ISO 7804:1985
Commercial road vehicles -- Side openings for truck power take-offs
90.60 43.040.50ISO/TC 22/SC 15
ISO/TR 7861:2003
Road vehicles -- Injury risk curves for evaluation of occupant protection in frontal impact
60.60 43.020ISO/TC 22/SC 12
ISO 7862:2004
Road vehicles -- Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
90.93 43.040.80ISO/TC 22/SC 10
ISO 7876-1:1990
Fuel injection equipment -- Vocabulary -- Part 1: Fuel injection pumps
90.93 43.060.40
01.040.43
ISO/TC 22/SC 7
ISO 7876-1:1990/Amd 1:1999
60.60 43.060.40
01.040.43
ISO/TC 22/SC 7
ISO 7876-2:1991
Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors
90.60 43.060.40
01.040.43
ISO/TC 22/SC 7
ISO 7876-2:1991/Amd 1:1999
60.60 43.060.40
01.040.43
ISO/TC 22/SC 7
ISO 7876-3:1993
Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors
90.60 43.060.40
01.040.43
ISO/TC 22/SC 7
ISO 7876-4:2004
Fuel injection equipment -- Vocabulary -- Part 4: High-pressure pipes and end-connections
90.93 01.040.43
43.060.40
ISO/TC 22/SC 7
ISO 7876-5:2004
Fuel injection equipment -- Vocabulary -- Part 5: Common rail fuel injection system
90.93 43.060.40
01.040.43
ISO/TC 22/SC 7
ISO 7879:1997
Diesel engines -- Cradle-mounted in-line fuel injection pumps -- Mounting dimensions
90.93 43.060.40ISO/TC 22/SC 7
ISO 7975:2006
Passenger cars -- Braking in a turn -- Open-loop test method
90.60 43.100ISO/TC 22/SC 9
ISO 8035:1991
Commercial road vehicles and buses over 3,5 t -- Front towing attachments
90.60 43.040.70ISO/TC 22/SC 15
ISO 8052:1990
Mopeds -- Direct current flasher units
90.93 43.140ISO/TC 22/SC 23
ISO 8092-1:1996
Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 1: Tabs for single-pole connections -- Dimensions and specific requirements
90.93 43.040.10ISO/TC 22/SC 3
ISO 8092-2:2005
Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions, test methods and general performance requirements
90.20 43.040.10ISO/TC 22/SC 3
ISO 8092-3:1996
Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 3: Tabs for multi-pole connections -- Dimensions and specific requirements
90.60 43.040.10ISO/TC 22/SC 3
ISO 8092-4:1997
Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 4: Pins for single- and multi-pole connections -- Dimensions and specific requirements
90.20 43.040.10ISO/TC 22/SC 3
ISO 8093:1985
Road vehicles -- Diagnostic testing of electronic systems
90.93 43.180ISO/TC 22/SC 3
ISO 8123:1991
Road vehicles -- Diametral pitch starter motor pinions
90.60 43.060.50ISO/TC 22/SC 15
ISO 8349:2002
Road vehicles -- Measurement of road surface friction
90.93 43.020ISO/TC 22/SC 9
ISO 8356:1984
Road vehicles -- Diesel engines -- Screw-in injector, type 22
90.93 43.060.40ISO/TC 22/SC 7
ISO/TR 8357:1996
Road vehicles -- Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicle identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes
60.60 43.020ISO/TC 22
ISO 8535-1:2011
Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 1: Requirements for seamless cold-drawn single-wall tubes
60.60 43.060.40ISO/TC 22/SC 7
ISO 8535-2:2003
Compression-ignition engines -- Steel tubes for high-pressure fuel injection pipes -- Part 2: Requirements for composite tubes
90.93 43.060.40ISO/TC 22/SC 7
ISO 8644:2006
Motorcycles -- Light-alloy wheels -- Test method
90.60 43.140ISO/TC 22/SC 22
ISO 8645:1988
Mopeds -- Light-alloy wheels -- Test method
90.93 43.140ISO/TC 22/SC 23
ISO 8667:1992
Commercial vehicles and buses -- Cross-tooth gearbox flanges, type T
90.60 43.040.50ISO/TC 22/SC 15
ISO 8705:2005
Mopeds -- Measurement method for location of centre of gravity
90.93 43.140ISO/TC 22/SC 23
ISO 8706:1990
Two-wheeled mopeds -- Parking stability of side- and centre-stands
90.93 43.140ISO/TC 22/SC 23
ISO 8709:2010
Mopeds -- Brakes and brake systems -- Tests and measurement methods
60.60 43.140ISO/TC 22/SC 23
ISO 8710:2010
Motorcycles -- Brakes and brake systems -- Tests and measurement methods
60.60 43.140ISO/TC 22/SC 22
ISO/TR 8713:2012
Electrically propelled road vehicles -- Vocabulary
60.60 43.120
01.040.43
ISO/TC 22/SC 21
ISO 8714:2002
Electric road vehicles -- Reference energy consumption and range -- Test procedures for passenger cars and light commercial vehicles
90.93 43.120ISO/TC 22/SC 21
ISO 8715:2001
Electric road vehicles -- Road operating characteristics
90.93 43.120ISO/TC 22/SC 21
ISO 8716:2001
Road vehicles -- Fifth wheel kingpins -- Strength test
90.60 43.040.70ISO/TC 22/SC 15
ISO 8717:2000
Commercial road vehicles -- Fifth wheel couplings -- Strength tests
90.60 43.040.70ISO/TC 22/SC 15
ISO 8718:2001
Road vehicles -- Drawbar couplings and eyes for hinged drawbars -- Strength tests
90.60 43.040.70ISO/TC 22/SC 15
ISO 8720:1991
Passenger cars -- Specifications for mechanical jacks
90.93 43.180ISO/TC 22
ISO 8721:2010
Road vehicles -- Measurement techniques in impact tests -- Optical instrumentation
60.60 43.020ISO/TC 22/SC 12
ISO 8755:2001
Commercial road vehicles -- 40 mm drawbar eye -- Interchangeability
90.60 43.040.70ISO/TC 22/SC 15
ISO 8820-1:2008
Road vehicles -- Fuse-links -- Part 1: Definitions and general test requirements
90.92 43.040.10ISO/TC 22/SC 3
ISO 8820-2:2014
Road vehicles -- Fuse-links -- Part 2: User guidelines
60.60 43.040.10ISO/TC 22/SC 3
ISO 8820-3:2010
Road vehicles -- Fuse-links -- Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
90.92 43.040.10ISO/TC 22/SC 3
ISO 8820-4:2010
Road vehicles -- Fuse-links -- Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
90.92 43.040.10ISO/TC 22/SC 3
ISO 8820-5:2007
Road vehicles -- Fuse-links -- Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
90.92 43.040.10ISO/TC 22/SC 3
ISO 8820-6:2007
Road vehicles -- Fuse-links -- Part 6: Single-bolt fuse-links
90.93 43.040.10ISO/TC 22/SC 3
ISO 8820-7:2007
Road vehicles -- Fuse-links -- Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V
90.93 43.040.10ISO/TC 22/SC 3
ISO 8820-8:2012
Road vehicles -- Fuse-links -- Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V
60.60 43.040.10ISO/TC 22/SC 3
ISO 8820-9:2014
Road vehicles -- Fuse-links -- Part 9: Fuse-links with shortened tabs (Type K)
60.60 43.040.10ISO/TC 22/SC 3
ISO 8853:1989
Safety harnesses for competition drivers -- Requirements and test methods
90.20 97.220.99
43.040.80
ISO/TC 22/SC 12
ISO 8854:2012
Road vehicles -- Alternators with regulators -- Test methods and general requirements
60.60 43.060.50ISO/TC 22/SC 3
ISO 8855:2011
Road vehicles -- Vehicle dynamics and road-holding ability -- Vocabulary
60.60 43.020
01.040.43
ISO/TC 22/SC 9
ISO 8856:2014
Road vehicles -- Electrical performance of starter motors -- Test methods and general requirements
60.60 43.060.50ISO/TC 22/SC 3
ISO 8984-1:1993
Diesel engines -- Testing of fuel injectors -- Part 1: Hand-lever-operated testing and setting apparatus
90.60 43.180ISO/TC 22/SC 7
ISO 8984-2:1993
Diesel engines -- Testing of fuel injectors -- Part 2: Test methods
90.60 43.060.40ISO/TC 22/SC 7
ISO 9021:1988
Motorcycles -- Controls -- Types, positions and functions
90.60 43.140ISO/TC 22/SC 22
ISO 9043:2008
Mopeds -- Measurement method for moments of inertia
90.93 43.140ISO/TC 22/SC 23
ISO 9102:1997
Diesel engines -- Screw-in injection nozzle holders, types 24, 25, 26 and 26.1
90.93 43.060.40ISO/TC 22/SC 7
ISO 9103:1987
Road vehicles -- Compression-ignition engines -- Screw-in injection nozzle holder, type 23
90.93 43.060.40ISO/TC 22/SC 7
ISO 9128:2006
Road vehicles -- Graphical symbols to designate brake fluid types
90.60 01.080.20
75.120
43.040.40
ISO/TC 22/SC 2
ISO 9129:2008
Motorcycles -- Measurement methods for moments of inertia
90.60 43.140ISO/TC 22/SC 22
ISO 9130:2005
Motorcycles -- Measurement method for location of centre of gravity
90.60 43.140ISO/TC 22/SC 22
ISO 9131:1993
Three-wheeled mopeds and motorcycles -- Dimensions -- Vocabulary
90.93 43.140ISO/TC 22/SC 23
ISO 9132:1990
Three-wheeled mopeds and motorcycles -- Masses -- Vocabulary
90.93 43.140ISO/TC 22/SC 23
ISO 9141:1989
Road vehicles -- Diagnostic systems -- Requirements for interchange of digital information
90.93 43.180ISO/TC 22/SC 3
ISO 9141-2:1994
Road vehicles -- Diagnostic systems -- Part 2: CARB requirements for interchange of digital information
90.93 43.180ISO/TC 22/SC 3
ISO 9141-2:1994/Amd 1:1996
60.60 43.180ISO/TC 22/SC 3
ISO 9141-3:1998
Road vehicles -- Diagnostic systems -- Part 3: Verification of the communication between vehicle and OBD II scan tool
90.93 43.180ISO/TC 22/SC 3
ISO 9158:1988
Road vehicles -- Nozzle spouts for unleaded gasoline
90.60 75.200ISO/TC 22
ISO 9159:1988
Road vehicles -- Nozzle spouts for leaded gasoline and diesel fuel
90.60 75.200ISO/TC 22
ISO 9258:1989
Passenger cars -- Wiper systems -- Wiper blade length
90.93 43.040.65ISO/TC 22/SC 17
ISO 9259:1991
Passenger cars -- Windscreen wiper systems -- Wiper arm-to-blade connections
90.93 43.040.65ISO/TC 22/SC 17
ISO 9259:1991/Amd 1:2001
60.60 43.040.65ISO/TC 22/SC 17
ISO/TR 9310:1987
Road vehicles -- Smoke measurement of compression-ignition (diesel) engines -- Survey of short in-service tests
60.60 43.060.20
13.040.50
ISO/TC 22/SC 5
ISO 9367-1:1989
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships -- General requirements -- Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded
90.60 43.040.70ISO/TC 22
ISO 9367-2:1994
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships -- General requirements -- Part 2: Semi-trailers
90.60 43.040.70ISO/TC 22
ISO 9457-1:1991
Road vehicles -- Metric starter motor pinions -- Part 1: Currently used pinions
90.60 43.060.50ISO/TC 22/SC 15
ISO 9457-2:1994
Road vehicles -- Metric starter motor pinions -- Part 2: Pinions with 20 degree pressure angle
90.60 43.060.50ISO/TC 22/SC 15
ISO 9458:1988
Passenger cars -- Starter motor electrical connections
90.93 43.060.50ISO/TC 22/SC 3
ISO 9534:1989
Road vehicles -- Fuel pump electric connections
90.93 43.060.50
43.060.40
ISO/TC 22/SC 3
ISO 9565:1990
Two-wheeled motorcycles -- Parking stability of side- and centre-stands
90.93 43.140ISO/TC 22/SC 22
ISO 9619:1992
Passenger cars -- Windscreen wiping systems -- Test method
90.93 43.040.65ISO/TC 22/SC 17
ISO 9619:1992/Amd 1:2002
60.60 43.040.65ISO/TC 22/SC 17
ISO 9704:1990
Passenger cars -- Wiper systems -- Shaft ends and arm-holes
90.93 43.040.65ISO/TC 22/SC 17
ISO/TR 9790:1999
Road vehicles -- Anthropomorphic side impact dummy -- Lateral impact response requirements to assess the biofidelity of the dummy
60.60 43.180ISO/TC 22/SC 12
ISO 9815:2010
Road vehicles -- Passenger-car and trailer combinations -- Lateral stability test
60.60 43.100ISO/TC 22/SC 9
ISO 9816:2006
Passenger cars -- Power-off reaction of a vehicle in a turn -- Open-loop test method
90.60 43.100ISO/TC 22/SC 9
ISO 9817:1991
Passenger cars -- Engine cooling systems -- Dimensions of pressure caps and their ramp seats on filler necks
90.60 43.060.30ISO/TC 22
ISO 9818:1991
Passenger cars -- Engine cooling systems -- Test methods and marking of pressure caps
90.60 43.060.30ISO/TC 22
ISO/TR 9819:1991
Road vehicles -- Comparison tables of regulations on photometric requirements of light signalling devices
60.60 43.040.20ISO/TC 22/SC 8
ISO 9987:1990
Motorcycles -- Measurement of variation of dipped beam inclination as a function of load
90.93 43.140ISO/TC 22/SC 22
ISO 10054:1998
Internal combustion compression-ignition engines -- Measurement apparatus for smoke from engines operating under steady-state conditions -- Filter-type smokemeter
90.60 43.180
13.040.50
ISO/TC 22/SC 5
ISO/TR 10305-1:2003
Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz
60.60 43.180ISO/TC 22/SC 3
ISO/TR 10305-2:2003
Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
60.60 43.180ISO/TC 22/SC 3
ISO 10355:2004
Mopeds -- Positioning of lighting and light-signalling devices
90.93 43.140ISO/TC 22/SC 23
ISO 10392:2011
Road vehicles -- Determination of centre of gravity
60.60 43.020ISO/TC 22/SC 9
ISO 10455:1992
Road vehicles -- Dry ignition coils using rotating high-voltage distributor
90.93 43.060.50ISO/TC 22/SC 1
ISO 10483-1:2004
Road vehicles -- Intelligent power switches -- Part 1: High-side intelligent power switch
90.93 43.040.10ISO/TC 22/SC 3
ISO 10483-2:1996
Road vehicles -- Intelligent power switches -- Part 2: Low-side intelligent power switch
90.93 43.040.10ISO/TC 22/SC 3
ISO 10486:1992
Passenger cars -- Car radio identification number (CRIN)
90.60 43.040.15ISO/TC 22
ISO 10487-1:1992
Passenger car radio connections -- Part 1: Dimensions and general requirements
90.60 43.040.15ISO/TC 22
ISO 10487-2:1995
Passenger cars -- Connections for car radios -- Part 2: Performance requirements
90.93 43.040.15ISO/TC 22
ISO 10521-1:2006
Road vehicles -- Road load -- Part 1: Determination under reference atmospheric conditions
90.60 43.020ISO/TC 22/SC 5
ISO 10521-2:2006
Road vehicles -- Road load -- Part 2: Reproduction on chassis dynamometer
90.60 43.020ISO/TC 22/SC 5
ISO 10597:2012
Road vehicles -- Flat attachment fixing nuts for commercial vehicles -- Test methods
60.60 43.040.50ISO/TC 22/SC 19
ISO 10599-1:1992
Car radios -- Coaxial aerial connectors -- Part 1: Dimensions
90.60 43.040.15ISO/TC 22
ISO 10599-2:1997
Car radios -- Coaxial aerial connectors -- Part 2: Characteristic values, performance requirements and tests
90.93 43.040.15ISO/TC 22
ISO 10599-2:1997/Cor 1:2005
60.60 43.040.15ISO/TC 22
ISO/TR 10603:1992
Road vehicles -- Legal situation concerning lighting and light-signalling devices
90.93 43.040.20ISO/TC 22/SC 8
ISO 10604:1993
Road vehicles -- Measurement equipment for orientation of headlamp luminous beams
90.60 43.180ISO/TC 22/SC 8
ISO 10605:2008
Road vehicles -- Test methods for electrical disturbances from electrostatic discharge
90.93 43.040.10ISO/TC 22/SC 3
ISO 10605:2008/Cor 1:2010
60.60 43.040.10ISO/TC 22/SC 3
ISO 10605:2008/Amd 1:2014
60.60 43.040.10ISO/TC 22/SC 3
ISO 10681-1:2010
Road vehicles -- Communication on FlexRay -- Part 1: General information and use case definition
60.60 43.040.15ISO/TC 22/SC 3
ISO 10681-2:2010
Road vehicles -- Communication on FlexRay -- Part 2: Communication layer services
60.60 43.040.15ISO/TC 22/SC 3
ISO 10924-1:2009
Road vehicles -- Circuit breakers -- Part 1: Definitions and general test requirements
90.92 43.040.10ISO/TC 22/SC 3
ISO 10924-2:2014
Road vehicles -- Circuit breakers -- Part 2: User's guide
60.60 43.040.10ISO/TC 22/SC 3
ISO 10924-4:2009
Road vehicles -- Circuit breakers -- Part 4: Medium circuit breakers with tabs (Blade type), Form CB15
90.92 43.040.10ISO/TC 22/SC 3
ISO/TR 10982:2013
Road vehicles -- Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags
60.60 43.100ISO/TC 22/SC 10
ISO 10997:1996
Passenger vehicles -- Side impact with deformable moving barrier -- Full scale test
90.93 43.100ISO/TC 22/SC 10
ISO 11012:2009
Heavy commercial vehicles and buses -- Open-loop test methods for the quantification of on-centre handling -- Weave test and transition test
90.93 43.080.01ISO/TC 22/SC 9
ISO 11026:2010
Heavy commercial vehicles and buses -- Test method for roll stability -- Closing-curve test
60.60 43.080.01ISO/TC 22/SC 9
ISO 11055:1996
Flywheels for reciprocating internal combustion engines -- Installation dimensions for clutches
90.60 43.060.10ISO/TC 22/SC 15
ISO 11096:2011
Road vehicles -- Pedestrian protection -- Impact test method for pedestrian thigh, leg and knee
60.60 43.020ISO/TC 22/SC 10
ISO/PAS 11154:2006
Road vehicles -- Roof load carriers
90.93 43.040.60ISO/TC 22/SC 4
ISO/TS 11155-1:2001
Road vehicles -- Air filters for passenger compartments -- Part 1: Test for particulate filtration
60.60 43.040.60ISO/TC 22/SC 7
ISO 11155-2:2009
Road vehicles -- Air filters for passenger compartments -- Part 2: Test for gaseous filtration
90.93 43.040.60ISO/TC 22/SC 7
ISO 11157:2005
Road vehicles -- Brake lining assemblies -- Inertia dynamometer test method
90.60 43.040.40ISO/TC 22/SC 2
ISO 11406:2001
Commercial road vehicles -- Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers -- Interchangeability
90.60 43.040.70ISO/TC 22/SC 15
ISO 11406:2001/Cor 1:2005
60.60 43.040.70ISO/TC 22/SC 15
ISO 11407:2004
Commercial road vehicles -- Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers -- Interchangeability
90.60 43.040.70ISO/TC 22/SC 15
ISO 11446-1:2012
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 1: 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords
60.60 43.040.10ISO/TC 22/SC 3
ISO 11446-2:2012
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords
60.60 43.040.10ISO/TC 22/SC 3
ISO 11451-1:2005
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology
90.92 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11451-1:2005/Amd 1:2008
60.60 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11451-2:2005
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources
90.92 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11451-3:2007
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation
90.92 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11451-4:2013
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
60.60 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11452-1:2005
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology
90.92 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11452-1:2005/Amd 1:2008
60.60 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11452-2:2004
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
90.60 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11452-3:2001
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell
90.92 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11452-4:2011
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Harness excitation methods
60.60 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11452-4:2005/Cor 1:2009
60.60 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11452-5:2002
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline
90.93 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11452-7:2003
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 7: Direct radio frequency (RF) power injection
90.20 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11452-7:2003/Amd 1:2013
60.60 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11452-8:2007
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fields
90.92 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11452-9:2012
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 9: Portable transmitters
60.60 33.100.20
43.040.10
ISO/TC 22/SC 3
ISO 11452-10:2009
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 10: Immunity to conducted disturbances in the extended audio frequency range
90.93 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11452-11:2010
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 11: Reverberation chamber
60.60 43.040.10
33.100.20
ISO/TC 22/SC 3
ISO 11460:2007
Two-wheeled motorcycles -- Positioning of lighting and light-signalling devices
90.93 43.140ISO/TC 22/SC 22
ISO 11486:2006
Motorcycles -- Methods for setting running resistance on a chassis dynamometer
90.60 43.140ISO/TC 22/SC 22
ISO 11486:2006/Amd 1:2012
60.60 43.140ISO/TC 22/SC 22
ISO 11519-1:1994
Road vehicles -- Low-speed serial data communication -- Part 1: General and definitions
90.93 43.040.15ISO/TC 22/SC 3
ISO 11519-3:1994
Road vehicles -- Low-speed serial data communication -- Part 3: Vehicle area network (VAN)
90.93 43.040.15ISO/TC 22/SC 3
ISO 11519-3:1994/Amd 1:1995
60.60 43.040.15ISO/TC 22/SC 3
ISO 11530:1993
Road vehicles -- Hydraulic jacks -- Specifications
90.60 43.180ISO/TC 22
ISO 11555-1:2003
Road vehicles -- Stabilizing devices for caravans and light trailers -- Part 1: Integrated stabilizers
90.93 43.100ISO/TC 22/SC 4
ISO 11565:2006
Road vehicles -- Spark-plugs -- Test methods and requirements
90.93 43.060.50ISO/TC 22/SC 1
ISO 11565:2006/Cor 1:2007
60.60 43.060.50ISO/TC 22/SC 1
ISO 11614:1999
Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
90.60 43.180
13.040.50
ISO/TC 22/SC 5
ISO 11748-1:2001
Road vehicles -- Technical documentation of electrical and electronic systems -- Part 1: Content of exchanged documents
90.93 43.060.50ISO/TC 22/SC 3
ISO 11748-2:2001
Road vehicles -- Technical documentation of electrical and electronic systems -- Part 2: Documentation agreement
90.93 43.060.50ISO/TC 22/SC 3
ISO 11748-3:2002
Road vehicles -- Technical documentation of electrical and electronic systems -- Part 3: Application example
90.93 43.060.50ISO/TC 22/SC 3
ISO 11838:1997
Motorcycle and motorcycle-rider kinematics -- Vocabulary
90.60 43.140
01.040.43
ISO/TC 22/SC 22
ISO 11838:1997/Amd 1:2011
60.60 43.140
01.040.43
ISO/TC 22/SC 22
ISO 11841-1:2000
Road vehicles and internal combustion engines -- Filter vocabulary -- Part 1: Definitions of filters and filter components
90.93 43.060.20
43.060.40
43.060.30
01.040.43
ISO/TC 22/SC 7
ISO 11841-2:2000
Road vehicles and internal combustion engines -- Filter vocabulary -- Part 2: Definitions of characteristics of filters and their components
90.93 01.040.43
43.060.20
43.060.40
43.060.30
ISO/TC 22/SC 7
ISO/TR 11842:1997
Road vehicles -- Comparison of statutory photometric requirements in various countries for lighting devices
60.60 43.040.20ISO/TC 22/SC 8
ISO 11898-1:2003
Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling
90.92 43.040.15ISO/TC 22/SC 3
ISO 11898-1:2003/Cor 1:2006
60.60 43.040.15ISO/TC 22/SC 3
ISO 11898-2:2003
Road vehicles -- Controller area network (CAN) -- Part 2: High-speed medium access unit
90.92 43.040.15ISO/TC 22/SC 3
ISO 11898-3:2006
Road vehicles -- Controller area network (CAN) -- Part 3: Low-speed, fault-tolerant, medium-dependent interface
90.20 43.040.15ISO/TC 22/SC 3
ISO 11898-3:2006/Cor 1:2006
60.60 43.040.15ISO/TC 22/SC 3
ISO 11898-4:2004
Road vehicles -- Controller area network (CAN) -- Part 4: Time-triggered communication
90.93 43.040.15ISO/TC 22/SC 3
ISO 11898-5:2007
Road vehicles -- Controller area network (CAN) -- Part 5: High-speed medium access unit with low-power mode
90.93 43.040.15ISO/TC 22/SC 3
ISO 11898-6:2013
Road vehicles -- Controller area network (CAN) -- Part 6: High-speed medium access unit with selective wake-up functionality
60.60 43.040.15ISO/TC 22/SC 3
ISO/TR 11954:2008
Fuel cell road vehicles -- Maximum speed measurement
60.60 43.120ISO/TC 22/SC 21
ISO/TR 11955:2008
Hybrid-electric road vehicles -- Guidelines for charge balance measurement
60.60 43.120ISO/TC 22/SC 21
ISO 11992-1:2003
Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 1: Physical and data-link layers
90.20 43.040.15ISO/TC 22/SC 3
ISO 11992-2:2014
Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 2: Application layer for brakes and running gear
60.60 43.040.15ISO/TC 22/SC 3
ISO 11992-3:2003
Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 3: Application layer for equipment other than brakes and running gear
90.20 43.040.15ISO/TC 22/SC 3
ISO 11992-3:2003/Amd 1:2008
60.60 43.040.15ISO/TC 22/SC 3
ISO 11992-4:2014
Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 4: Diagnostic communication
60.60 43.040.15ISO/TC 22/SC 3
ISO 12021:2010
Road vehicles -- Sensitivity to lateral wind -- Open-loop test method using wind generator input
60.60 43.020ISO/TC 22/SC 9
ISO 12097-1:2002
Road vehicles -- Airbag components -- Part 1: Vocabulary
90.60 43.040.80ISO/TC 22/SC 12
ISO 12097-2:1996
Road vehicles -- Airbag components -- Part 2: Testing of airbag modules
90.93 43.040.80ISO/TC 22/SC 12
ISO 12097-3:2002
Road vehicles -- Airbag components -- Part 3: Testing of inflator assemblies
90.93 43.040.80ISO/TC 22/SC 12
ISO 12098:2004
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 15-pole connector for vehicles with 24 V nominal supply voltage
90.93 43.040.10ISO/TC 22/SC 3
ISO 12103-1:1997
Road vehicles -- Test dust for filter evaluation -- Part 1: Arizona test dust
90.92 43.060.40
43.060.20
ISO/TC 22/SC 7
ISO 12103-2:1997
Road vehicles -- Test dust for filter evaluation -- Part 2: Aluminium oxide test dust
90.93 43.060.40
43.060.20
ISO/TC 22/SC 7
ISO 12156-1:2006
Diesel fuel -- Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -- Part 1: Test method
90.92 75.160.20ISO/TC 22/SC 7
ISO 12156-2:2007
Diesel fuel -- Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -- Part 2: Limit
90.93 75.160.20ISO/TC 22/SC 7
ISO/PAS 12158:2002
Road vehicles -- Braking systems -- Temperature measuring methods
90.93 43.040.40ISO/TC 22/SC 2
ISO 12161:2006
Road vehicles -- Endurance braking systems of motor vehicles and towed vehicles -- Test procedures
90.60 43.040.40ISO/TC 22/SC 2
ISO/TR 12204:2012
Road vehicles -- Ergonomic aspects of transport information and control systems -- Introduction to integrating safety critical and time critical warning signals
60.60 43.040.15ISO/TC 22/SC 13
ISO 12214:2010
Road vehicles -- Direction-of-motion stereotypes for automotive hand controls
60.60 43.020ISO/TC 22/SC 13
ISO 12251:2011
Diesel engines -- Clamp mounted CR fuel injectors -- Mounting dimensions
60.60 43.060.40ISO/TC 22/SC 7
ISO 12345:2013
Diesel engines -- Cleanliness assessment of fuel injection equipment
60.60 43.060.40ISO/TC 22/SC 7
ISO/TR 12349-1:1999
Road vehicles -- Dummies for restraint system testing -- Part 1: Adult dummies
90.92 43.180ISO/TC 22/SC 12
ISO/TR 12349-2:1999
Road vehicles -- Dummies for restraint system testing -- Part 2: Child dummies
90.92 43.180ISO/TC 22/SC 12
ISO/TR 12350:2013
Road vehicles -- Injury risk curves for the evaluation of occupant protection in side impact tests
60.60 43.020ISO/TC 22/SC 12
ISO/TR 12351:1999
Road vehicles -- Determination of head contact and duration in impact tests
60.60 43.020ISO/TC 22/SC 12
ISO 12353-1:2002
Road vehicles -- Traffic accident analysis -- Part 1: Vocabulary
90.60 01.040.43
43.040.80
ISO/TC 22/SC 12
ISO 12353-2:2003
Road vehicles -- Traffic accident analysis -- Part 2: Guidelines for the use of impact severity measures
90.93 43.040.80ISO/TC 22/SC 12
ISO/TR 12353-3:2013
Road vehicles -- Traffic accident analysis -- Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity
60.60 43.040.80ISO/TC 22/SC 12
ISO 12357-1:1999/Cor 1:2007
60.60 43.040.70ISO/TC 22/SC 15
ISO 12357-1:1999
Commercial road vehicles -- Drawbar couplings and eyes for rigid drawbars -- Part 1: Strength tests for general cargo centre-axle trailers
90.60 43.040.70ISO/TC 22/SC 15
ISO 12357-2:2007
Commercial road vehicles -- Drawbar couplings and eyes for rigid drawbars -- Part 2: Strength tests for special applications
90.60 43.040.70ISO/TC 22/SC 15
ISO 12364:2001
Two-wheeled motorcycles -- Antilock braking systems (ABS) -- Tests and measurement methods
90.93 43.040.40
43.140
ISO/TC 22/SC 22
ISO 12366:2001
Two-wheeled mopeds -- Antilock braking systems (ABS) -- Tests and measurement methods
90.93 43.140ISO/TC 22/SC 23
ISO 12405-1:2011
Electrically propelled road vehicles -- Test specification for lithium-ion traction battery packs and systems -- Part 1: High-power applications
60.60 43.120ISO/TC 22/SC 21
ISO 12405-2:2012
Electrically propelled road vehicles -- Test specification for lithium-ion traction battery packs and systems -- Part 2: High-energy applications
60.60 43.120ISO/TC 22/SC 21
ISO 12405-3:2014
Electrically propelled road vehicles -- Test specification for lithium-ion traction battery packs and systems -- Part 3: Safety performance requirements
60.60 43.120ISO/TC 22/SC 21
ISO 12614-1:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 1: General requirements and definitions
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-2:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 2: Performance and general test methods
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-3:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 3: Check valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-4:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 4: Manual valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-5:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 5: Tank pressure gauge
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-6:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 6: Pressure regulator
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-7:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 7: Pressure relief valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-8:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 8: Excess flow valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-9:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 9: Gas-tight housing and ventilation hose
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-10:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 10: Rigid fuel line in stainless steel
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-11:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 11: Fittings
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-12:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 12: Rigid fuel line in copper and its alloys
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-13:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 13: Tank pressure control regulator
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-14:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 14: Differential pressure fuel content gauge
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-15:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 15: Capacitance fuel content gauge
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-16:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 16: Heat exchanger - vaporizer
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-17:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 17: Natural gas detector
60.60 43.060.40ISO/TC 22/SC 25
ISO 12614-18:2014
Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 18: Gas temperature sensor
60.60 43.060.40ISO/TC 22/SC 25
ISO 12619-1:2014
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components -- Part 1: General requirements and definitions
60.60 43.060.40ISO/TC 22/SC 25
ISO 12619-2:2014
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components -- Part 2: Performance and general test methods
60.60 43.060.40ISO/TC 22/SC 25
ISO 12619-3:2014
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components -- Part 3: Pressure regulator
60.60 43.060.40ISO/TC 22/SC 25
ISO 12667:1993
Commercial vehicles and buses -- Cross-tooth propeller shaft flanges, type T
90.60 43.040.50ISO/TC 22/SC 15
ISO 13043:2011
Road vehicles -- Refrigerant systems used in mobile air conditioning systems (MAC) -- Safety requirements
60.60 43.040.60ISO/TC 22
ISO 13044-1:2012
Road vehicles -- 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations -- Part 1: General requirements and definitions
60.60 43.040.70ISO/TC 22/SC 15
ISO 13044-2:2013
Road vehicles -- Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations -- Part 2: 50 mm fifth wheel couplings -- Electrical and pneumatic interface
60.60 43.040.70ISO/TC 22/SC 15
ISO 13052:2013
Road vehicles -- Trailers up to 3,5 t -- Requirements for jockey wheels and drawbar supports
60.60 43.100ISO/TC 22/SC 4
ISO 13063:2012
Electrically propelled mopeds and motorcycles -- Safety specifications
60.60 43.140ISO/TC 22/SC 23
ISO 13064-1:2012
Battery-electric mopeds and motorcycles -- Performance -- Part 1: Reference energy consumption and range
60.60 43.140ISO/TC 22/SC 23
ISO 13064-2:2012
Battery-electric mopeds and motorcycles -- Performance -- Part 2: Road operating characteristics
60.60 43.140ISO/TC 22/SC 23
ISO 13207-1:2012
Road vehicles -- LED lamp characteristics for bulb compatible failure detection -- Part 1: LED lamps used as direction indicators
60.60 43.040.20
43.040.30
ISO/TC 22/SC 3
ISO 13209-1:2011
Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 1: General information and use cases
60.60 43.020ISO/TC 22/SC 3
ISO 13209-2:2012
Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 2: Core data model specification and requirements
60.60 43.020ISO/TC 22/SC 3
ISO 13209-3:2012
Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 3: Standard extensions and requirements
60.60 43.020ISO/TC 22/SC 3
ISO/TR 13214:1996
Road vehicles -- Child restraint systems -- Compilation of regulations and standards
60.60 43.040.80ISO/TC 22/SC 12
ISO 13215-1:2006
Road vehicles -- Reduction of misuse risk of child restraint systems -- Part 1: Forms for field studies
90.60 43.040.80ISO/TC 22/SC 12
ISO 13215-2:1999
Road vehicles -- Reduction of misuse risk of child restraint systems -- Part 2: Requirements and test procedures for correct installation (panel method)
90.93 43.040.80ISO/TC 22/SC 12
ISO 13215-3:1999
Road vehicles -- Reduction of misuse risk of child restraint systems -- Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA)
90.93 43.040.80ISO/TC 22/SC 12
ISO 13216-1:1999
Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 1: Seat bight anchorages and attachments
90.93 43.040.80ISO/TC 22/SC 12
ISO 13216-1:1999/Amd 1:2006
CRF reduced height specification
60.60 43.040.80ISO/TC 22/SC 12
ISO 13216-1:1999/Amd 3:2006
Specifications for the detection of use of ISOFIX CRS
60.60 43.040.80ISO/TC 22/SC 12
ISO 13216-2:2004
Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 2: Top tether anchorages and attachments
90.93 43.040.80ISO/TC 22/SC 12
ISO 13216-3:2006
Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 3: Classification of child restraint dimensions and space in vehicle
90.60 43.040.80ISO/TC 22/SC 12
ISO 13218:1998
Road vehicles -- Child restraint systems -- Report form for accidents involving child passengers
90.20 43.040.80
43.020
ISO/TC 22/SC 12
ISO/TR 13219:1995
Road vehicles -- Risk of thoracic injury associated with Hybrid III sternal deflection due to shoulder belt loading
60.60 43.040.80ISO/TC 22/SC 12
ISO 13232-1:2005
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 1: Definitions, symbols and general considerations
90.60 43.140ISO/TC 22/SC 22
ISO 13232-1:2005/Amd 1:2012
MATD test helmet, ground impact, and injury costs
60.60 43.140ISO/TC 22/SC 22
ISO 13232-2:2005
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 2: Definition of impact conditions in relation to accident data
90.60 43.140ISO/TC 22/SC 22
ISO 13232-3:2005
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 3: Motorcyclist anthropometric impact dummy
90.60 43.140ISO/TC 22/SC 22
ISO 13232-3:2005/Amd 1:2012
MATD test helmet
60.60 43.140ISO/TC 22/SC 22
ISO 13232-4:2005
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 4: Variables to be measured, instrumentation and measurement procedures
90.60 43.140ISO/TC 22/SC 22
ISO 13232-5:2005
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 5: Injury indices and risk/benefit analysis
90.60 43.140ISO/TC 22/SC 22
ISO 13232-5:2005/Amd 1:2012
Ground impact and injury costs
60.60 43.140ISO/TC 22/SC 22
ISO 13232-6:2005
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 6: Full-scale impact-test procedures
90.60 43.140ISO/TC 22/SC 22
ISO 13232-6:2005/Amd 1:2012
MATD test helmet
60.60 43.140ISO/TC 22/SC 22
ISO 13232-7:2005
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
90.60 43.140ISO/TC 22/SC 22
ISO 13232-7:2005/Amd 1:2012
Ground impact
60.60 43.140ISO/TC 22/SC 22
ISO 13232-8:2005
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 8: Documentation and reports
90.60 43.140ISO/TC 22/SC 22
ISO 13232-8:2005/Amd 1:2012
Ground impact and injury costs
60.60 43.140ISO/TC 22/SC 22
ISO 13296:2012
Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions
60.60 43.060.40ISO/TC 22/SC 7
ISO/TR 13330:2013
Road vehicles -- Calculation processes for the neck injury criteria in rear impact
60.60 43.020ISO/TC 22/SC 12
ISO 13331:1995
Road vehicles -- Filler pipes and openings of motor vehicle fuel tanks -- Vapour recovery system
90.93 43.060.40ISO/TC 22
ISO/PAS 13396:2009
Road vehicles - Sled test method to enable the evaluation of side impact protection of child restraint systems - Essential parameters
90.93 43.040.80ISO/TC 22/SC 12
ISO 13400-1:2011
Road vehicles -- Diagnostic communication over Internet Protocol (DoIP) -- Part 1: General information and use case definition
60.60 43.040.10
43.180
ISO/TC 22/SC 3
ISO 13400-2:2012
Road vehicles - Diagnostic communication over Internet Protocol (DoIP) -- Part 2: Transport protocol and network layer services
60.60 43.040.10
43.180
ISO/TC 22/SC 3
ISO 13400-3:2011
Road vehicles -- Diagnostic communication over Internet Protocol (DoIP) -- Part 3: Wired vehicle interface based on IEEE 802.3
60.60 43.180
43.040.10
ISO/TC 22/SC 3
ISO 13476:1997
Road vehicles -- Ignition coils -- Electrical characteristics and test methods
90.93 43.060.50ISO/TC 22/SC 1
ISO 13476:1997/Cor 1:1999
60.60 43.060.50ISO/TC 22/SC 1
ISO 13486-1:1999
Road vehicles -- Hydraulic braking systems -- Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
90.60 43.040.40ISO/TC 22/SC 2
ISO/TR 13487:1997
Braking of road vehicles -- Considerations on the definition of mean fully developed deceleration
60.60 43.040.40ISO/TC 22/SC 2
ISO/TS 13499:2014
Road vehicles -- Multimedia data exchange format for impact tests
60.60 43.020ISO/TC 22/SC 12
ISO 13556:1998
Road vehicles -- Localization of exhaust system leaks and equipment specifications
90.60 43.060.20ISO/TC 22/SC 5
ISO 13674-1:2010
Road vehicles -- Test method for the quantification of on-centre handling -- Part 1: Weave test
60.60 43.020ISO/TC 22/SC 9
ISO 13674-2:2006
Road vehicles -- Test method for the quantification of on-centre handling -- Part 2: Transition test
90.92 43.020ISO/TC 22/SC 9
ISO 13837:2008
Road vehicles -- Safety glazing materials -- Method for the determination of solar transmittance
90.93 81.040.30
43.040.60
ISO/TC 22/SC 11
ISO 13948-1:2000
Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 1: Threaded connections
90.92 43.060.40ISO/TC 22/SC 7
ISO 13948-2:2012
Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 2: Non-threaded (push-on) connections
60.60 43.060.40ISO/TC 22/SC 7
ISO 13988:2008
Passenger vehicle wheels -- Clip balance weight and rim flange nomenclature, test procedures and performance requirements
90.93 43.040.50ISO/TC 22/SC 19
ISO/TS 14198:2012
Road vehicles -- Ergonomic aspects of transport information and control systems -- Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems
60.60 13.180
43.040.15
ISO/TC 22/SC 13
ISO 14229-1:2013
Road vehicles -- Unified diagnostic services (UDS) -- Part 1: Specification and requirements
60.60 43.180ISO/TC 22/SC 3
ISO 14229-2:2013
Road vehicles -- Unified diagnostic services (UDS) -- Part 2: Session layer services
60.60 43.180ISO/TC 22/SC 3
ISO 14229-3:2012
Road vehicles -- Unified diagnostic services (UDS) -- Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)
60.60 43.180ISO/TC 22/SC 3
ISO 14229-4:2012
Road vehicles -- Unified diagnostic services (UDS) -- Part 4: Unified diagnostic services on FlexRay implementation (UDSonFR)
60.60 43.180ISO/TC 22/SC 3
ISO 14229-5:2013
Road vehicles -- Unified diagnostic services (UDS) -- Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP)
60.60 43.180ISO/TC 22/SC 3
ISO 14229-6:2013
Road vehicles -- Unified diagnostic services (UDS) -- Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line)
60.60 43.180ISO/TC 22/SC 3
ISO 14230-1:2012
Road vehicles -- Diagnostic communication over K-Line (DoK-Line) -- Part 1: Physical layer
60.60 43.180ISO/TC 22/SC 3
ISO 14230-2:2013
Road vehicles -- Diagnostic communication over K-Line (DoK-Line) -- Part 2: Data link layer
60.60 43.180ISO/TC 22/SC 3
ISO 14230-3:1999
Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 3: Application layer
90.93 43.180ISO/TC 22/SC 3
ISO 14230-4:2000
Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 4: Requirements for emission-related systems
90.93 43.180ISO/TC 22/SC 3
ISO 14400:2005
Road vehicles -- Wheels and rims -- Use, general maintenance and safety requirements and out-of-service conditions
90.93 43.040.50ISO/TC 22/SC 19
ISO 14451-1:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 1: Terminology
60.60 01.040.43
43.040.80
ISO/TC 22/SC 12
ISO 14451-2:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 2: Test methods
60.60 43.040.80ISO/TC 22/SC 12
ISO 14451-3:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 3: Labelling
60.60 43.040.80ISO/TC 22/SC 12
ISO 14451-4:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 4: Requirements and categorization for micro gas generators
60.60 43.040.80ISO/TC 22/SC 12
ISO 14451-5:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 5: Requirements and categorization for airbag gas generators
60.60 43.040.80ISO/TC 22/SC 12
ISO 14451-6:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 6: Requirements and categorization for airbag modules
60.60 43.040.80ISO/TC 22/SC 12
ISO 14451-7:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 7: Requirements and categorization for seatbelt pretensioners
60.60 43.040.80ISO/TC 22/SC 12
ISO 14451-8:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 8: Requirements and categorization for igniters
60.60 43.040.80ISO/TC 22/SC 12
ISO 14451-9:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 9: Requirements and categorization for actuators
60.60 43.040.80ISO/TC 22/SC 12
ISO 14451-10:2013
Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 10: Requirements and categorization for semi-finished products
60.60 43.040.80ISO/TC 22/SC 12
ISO 14469-1:2004
Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 1: 20 MPa (200 bar) connector
90.92 43.060.40ISO/TC 22/SC 25
ISO 14469-2:2007
Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 2: 20 MPa (200 bar) connector, size 2
90.92 43.060.40ISO/TC 22/SC 25
ISO 14469-3:2006
Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 3: 25 MPa (250 bar) connector
90.92 43.060.40ISO/TC 22/SC 25
ISO 14512:1999
Passenger cars -- Straight-ahead braking on surfaces with split coefficient of friction -- Open-loop test procedure
90.60 43.020ISO/TC 22/SC 9
ISO 14513:2006
Road vehicles -- Pedestrian protection -- Head impact test method
90.60 43.040.80ISO/TC 22/SC 10
ISO 14513:2006/Cor 1:2007
60.60 43.040.80ISO/TC 22/SC 10
ISO 14572:2011
Road vehicles -- Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables -- Test methods and requirements for basic- and high-performance cables
60.60 43.040.10ISO/TC 22/SC 3
ISO/TR 14646:2007
Road vehicles -- Side impact testing of child restraint systems -- Review of background data and test methods, and conclusions from the ISO work as of November 2005
60.60 43.040.80ISO/TC 22/SC 12
ISO 14681:1998
Diesel engines -- Fuel injection pump testing -- Calibrating fuel injectors
90.60 43.060.40ISO/TC 22/SC 7
ISO 14722:1998
Moped and moped-rider kinematics -- Vocabulary
90.93 43.140
01.040.43
ISO/TC 22/SC 23
ISO 14722:1998/Amd 1:2011
60.60 43.140
01.040.43
ISO/TC 22/SC 23
ISO 14791:2000
Road vehicles -- Heavy commercial vehicle combinations and articulated buses -- Lateral stability test methods
90.93 43.080.01ISO/TC 22/SC 9
ISO 14792:2011
Road vehicles -- Heavy commercial vehicles and buses -- Steady-state circular tests
60.60 43.080.01ISO/TC 22/SC 9
ISO 14793:2011
Road vehicles -- Heavy commercial vehicles and buses -- Lateral transient response test methods
60.60 43.080.01ISO/TC 22/SC 9
ISO 14794:2011
Heavy commercial vehicles and buses -- Braking in a turn -- Open-loop test methods
60.60 43.020ISO/TC 22/SC 9
ISO/TR 14933:2012
Road vehicles -- Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags
60.60 43.020ISO/TC 22/SC 10
ISO 15005:2002
Road vehicles -- Ergonomic aspects of transport information and control systems -- Dialogue management principles and compliance procedures
90.93 13.180
43.040.15
ISO/TC 22/SC 13
ISO 15006:2011
Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications for in-vehicle auditory presentation
60.60 13.180
35.240.60
43.040.15
ISO/TC 22/SC 13
ISO 15007-1:2002
Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 1: Definitions and parameters
90.92 43.040.15
13.180
ISO/TC 22/SC 13
ISO/TS 15007-2:2014
Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 2: Equipment and procedures
60.60 13.180
43.040.15
ISO/TC 22/SC 13
ISO 15008:2009
Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications and test procedures for in-vehicle visual presentation
90.93 13.180
43.040.15
ISO/TC 22/SC 13
ISO 15031-1:2010
Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 1: General information and use case definition
60.60 13.040.50
43.040.10
ISO/TC 22/SC 3
ISO 15031-2:2010
Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 2: Guidance on terms, definitions, abbreviations and acronyms
60.60 01.040.43
43.040.10
13.040.50
ISO/TC 22/SC 3
ISO 15031-3:2004
Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 3: Diagnostic connector and related electrical circuits, specification and use
90.92 43.040.10
13.040.50
43.180
ISO/TC 22/SC 3
ISO 15031-4:2014
Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 4: External test equipment
60.60 43.180
13.040.50
ISO/TC 22/SC 3
ISO 15031-5:2011
Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 5: Emissions-related diagnostic services
90.92 13.040.50
43.040.10
ISO/TC 22/SC 3
ISO 15031-6:2010
Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 6: Diagnostic trouble code definitions
90.92 13.040.50
43.040.10
ISO/TC 22/SC 3
ISO 15031-7:2013
Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 7: Data link security
60.60 13.040.50
43.040.10
ISO/TC 22/SC 3
ISO 15037-1:2006
Road vehicles -- Vehicle dynamics test methods -- Part 1: General conditions for passenger cars
90.60 43.100ISO/TC 22/SC 9
ISO 15037-2:2002
Road vehicles -- Vehicle dynamics test methods -- Part 2: General conditions for heavy vehicles and buses
90.20 43.080.01ISO/TC 22/SC 9
ISO 15082:1999
Road vehicles -- Tests for rigid plastic safety glazing materials
90.92 43.040.65
83.140.01
ISO/TC 22/SC 11
ISO 15118-1:2013
Road vehicles -- Vehicle to grid communication interface -- Part 1: General information and use-case definition
60.60 43.120ISO/TC 22/SC 3
ISO 15118-2:2014
Road vehicles -- Vehicle-to-Grid Communication Interface -- Part 2: Network and application protocol requirements
60.60 43.120ISO/TC 22/SC 3
ISO 15170-1:2001
Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 1: Dimensions and classes of application
90.93 43.040.10ISO/TC 22/SC 3
ISO 15170-2:2001
Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 2: Tests and requirements
90.93 43.040.10ISO/TC 22/SC 3
ISO 15170-2:2001/Cor 1:2013
60.60 43.040.10ISO/TC 22/SC 3
ISO 15172:2005
Road vehicles -- Wheels -- Nut seat strength tests
90.93 43.040.50ISO/TC 22/SC 19
ISO/TR 15409:2002
Road vehicles -- Heat rating of spark plugs
60.60 43.060.50ISO/TC 22/SC 1
ISO 15484:2008
Road vehicles -- Brake lining friction materials -- Product definition and quality assurance
90.60 43.040.40ISO/TC 22/SC 2
ISO/TR 15497:2000
Road vehicles -- Development guidelines for vehicle based software
60.60 43.040.15ISO/TC 22/SC 3
ISO 15500-1:2000
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 1: General requirements and definitions
90.92 43.060.40ISO/TC 22/SC 25
ISO 15500-1:2000/Amd 1:2003
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-2:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 2: Performance and general test methods
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-3:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 3: Check valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-4:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 4: Manual valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-5:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 5: Manual cylinder valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-6:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 6: Automatic valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-7:2002
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 7: Gas injector
90.92 43.060.40ISO/TC 22/SC 25
ISO 15500-8:2001
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 8: Pressure indicator
90.92 43.060.40ISO/TC 22/SC 25
ISO 15500-9:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 9: Pressure regulator
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-10:2001
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 10: Gas-flow adjuster
90.92 43.060.40ISO/TC 22/SC 25
ISO 15500-11:2001
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 11: Gas/air mixer
90.92 43.060.40ISO/TC 22/SC 25
ISO 15500-12:2001
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 12: Pressure relief valve (PRV)
90.92 43.060.40ISO/TC 22/SC 25
ISO 15500-13:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 13: Pressure relief device (PRD)
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-14:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 14: Excess flow valve
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-15:2001
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 15: Gas-tight housing and ventilation hose
90.93 43.060.40ISO/TC 22/SC 25
ISO 15500-16:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 16: Rigid fuel line in stainless steel
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-17:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 17: Flexible fuel line
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-18:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 18: Filter
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-19:2012
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 19: Fittings
60.60 43.060.40ISO/TC 22/SC 25
ISO 15500-20:2007
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 20: Rigid fuel line in material other than stainless steel
90.92 43.060.40ISO/TC 22/SC 25
ISO 15501-1:2012
Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 1: Safety requirements
60.60 43.060.40ISO/TC 22/SC 25
ISO 15501-2:2001
Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 2: Test methods
90.60 43.060.40ISO/TC 22/SC 25
ISO 15763:2002
Road vehicles -- Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
90.93 43.040.20ISO/TC 22
ISO 15764:2004
Road vehicles -- Extended data link security
90.93 43.180ISO/TC 22/SC 3
ISO 15765-1:2011
Road vehicles -- Diagnostic communication over Controller Area Network (DoCAN) -- Part 1: General information and use case definition
60.60 43.040.15ISO/TC 22/SC 3
ISO 15765-2:2011
Road vehicles -- Diagnostic communication over Controller Area Network (DoCAN) -- Part 2: Transport protocol and network layer services
90.92 43.040.15ISO/TC 22/SC 3
ISO 15765-3:2004
Road vehicles -- Diagnostics on Controller Area Networks (CAN) -- Part 3: Implementation of unified diagnostic services (UDS on CAN)
90.92 43.040.15ISO/TC 22/SC 3
ISO 15765-4:2011
Road vehicles -- Diagnostic communication over Controller Area Network (DoCAN) -- Part 4: Requirements for emissions-related systems
90.92 43.040.15ISO/TC 22/SC 3
ISO 15765-4:2011/Amd 1:2013
60.60 43.040.15ISO/TC 22/SC 3
ISO/TR 15766:2000
Road vehicles -- Pedestrian protection -- Targets for the assessment of the biofidelity of pedestrian-leg test devices
60.60 43.180ISO/TC 22/SC 12
ISO/TS 15827:2007
Road vehicles -- Test procedures -- Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags
90.60 43.020ISO/TC 22/SC 10
ISO 15828:2004
Road vehicles -- Offset frontal impact test procedure
90.93 43.020ISO/TC 22/SC 10
ISO 15829:2013
Road vehicles -- Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
60.60 43.020ISO/TC 22/SC 10
ISO 15830-1:2013
Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 1: Terminology and rationale
60.60 43.020ISO/TC 22/SC 12
ISO 15830-2:2013
Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 2: Mechanical subsystems
60.60 43.020ISO/TC 22/SC 12
ISO 15830-3:2013
Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 3: Electronic subsystems
60.60 43.020ISO/TC 22/SC 12
ISO 15830-4:2013
Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side impact dummy -- Part 4: User's manual
60.60 43.020ISO/TC 22/SC 12
ISO 16121-1:2012
Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 1: General description, basic requirements
60.60 13.180
43.080.20
ISO/TC 22/SC 13
ISO 16121-2:2011
Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 2: Visibility
60.60 43.080.20
13.180
ISO/TC 22/SC 13
ISO 16121-3:2011
Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 3: Information devices and controls
60.60 13.180
43.080.20
ISO/TC 22/SC 13
ISO 16121-4:2011
Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 4: Cabin environment
60.60 13.180
43.080.20
ISO/TC 22/SC 13
ISO 16183:2002
Heavy duty engines -- Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
90.20 13.040.50
43.060.20
ISO/TC 22/SC 5
ISO 16185:2000
Road vehicles -- Engine families for certification of heavy-duty vehicles by Exhaust emission
90.93 43.060.01ISO/TC 22/SC 5
ISO 16232-1:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 1: Vocabulary
90.92 13.040.50
01.040.43
43.180
ISO/TC 22/SC 5
ISO 16232-2:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 2: Method of extraction of contaminants by agitation
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16232-3:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 3: Method of extraction of contaminants by pressure rinsing
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16232-4:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 4: Method of extraction of contaminants by ultrasonic techniques
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16232-5:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 5: Method of extraction of contaminants on functional test bench
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16232-6:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 6: Particle mass determination by gravimetric analysis
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16232-7:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 7: Particle sizing and counting by microscopic analysis
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16232-8:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 8: Particle nature determination by microscopic analysis
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16232-9:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 9: Particle sizing and counting by automatic light extinction particle counter
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16232-10:2007
Road vehicles -- Cleanliness of components of fluid circuits -- Part 10: Expression of results
90.92 43.180
13.040.50
ISO/TC 22/SC 5
ISO 16234:2006
Heavy commercial vehicles and buses -- Straight-ahead braking on surfaces with split coefficient of friction -- Open-loop test method
90.60 43.080.01ISO/TC 22/SC 9
ISO 16247:2004
Road vehicles -- Detection of exhaust system leaks -- Helium test method and detection device specification
90.20 43.060.20ISO/TC 22/SC 5
ISO/TR 16250:2013
Road vehicles -- Objective rating metrics for dynamic systems
60.60 43.020
43.180
ISO/TC 22/SC 10
ISO/TS 16332:2006
Diesel engines -- Fuel filters -- Method for evaluating fuel/water separation efficiency
90.92 43.060.40ISO/TC 22/SC 7
ISO 16333:2011
Heavy commercial vehicles and buses -- Steady-state rollover threshold -- Tilt-table test method
60.60 43.080.01ISO/TC 22/SC 9
ISO/TR 16352:2005
Road vehicles -- Ergonomic aspects of in-vehicle presentation for transport information and control systems -- Warning systems
60.60 13.180
43.040.15
ISO/TC 22/SC 13
ISO 16380:2014
Road vehicles -- Blended fuels refuelling connector
60.60 75.200ISO/TC 22/SC 25
ISO 16552:2014
Heavy commercial vehicles and buses -- Stopping distance in straight-line braking with ABS -- Open loop and closed loop test methods
60.60 43.080.01ISO/TC 22/SC 9
ISO 16673:2007
Road vehicles -- Ergonomic aspects of transport information and control systems -- Occlusion method to assess visual demand due to the use of in-vehicle systems
90.93 13.180
43.040.15
ISO/TC 22/SC 13
ISO 16750-1:2006
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 1: General
90.20 43.040.10ISO/TC 22/SC 3
ISO 16750-2:2012
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads
60.60 43.040.10ISO/TC 22/SC 3
ISO 16750-3:2012
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads
60.60 43.040.10ISO/TC 22/SC 3
ISO 16750-4:2010
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads
60.60 43.040.10ISO/TC 22/SC 3
ISO 16750-5:2010
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 5: Chemical loads
60.60 43.040.10ISO/TC 22/SC 3
ISO 16833:2006
Road vehicles -- Wheels -- Measurement of radial and lateral run-out
90.60 43.040.50ISO/TC 22/SC 19
ISO 16844-1:2013
Road vehicles -- Tachograph systems -- Part 1: Electrical connectors
60.60 43.040.10ISO/TC 22/SC 3
ISO 16844-2:2011
Road vehicles -- Tachograph systems -- Part 2: Electrical interface with recording unit
60.60 43.040.10ISO/TC 22/SC 3
ISO 16844-3:2004
Road vehicles -- Tachograph systems -- Part 3: Motion sensor interface
90.93 43.040.10ISO/TC 22/SC 3
ISO 16844-3:2004/Cor 1:2006
60.60 43.040.10ISO/TC 22/SC 3
ISO 16844-4:2004
Road vehicles -- Tachograph systems -- Part 4: CAN interface
90.92 43.040.10ISO/TC 22/SC 3
ISO 16844-5:2004
Road vehicles -- Tachograph systems -- Part 5: Secured CAN interface
90.93 43.040.10ISO/TC 22/SC 3
ISO 16844-6:2004
Road vehicles -- Tachograph systems -- Part 6: Diagnostics
90.92 43.040.10ISO/TC 22/SC 3
ISO 16844-7:2004
Road vehicles -- Tachograph systems -- Part 7: Parameters
90.92 43.040.10ISO/TC 22/SC 3
ISO 16845:2004
Road vehicles -- Controller area network (CAN) -- Conformance test plan
90.92 43.040.15ISO/TC 22/SC 3
ISO 16850:2007
Road vehicles -- Pedestrian protection -- Child head impact test method
90.93 43.020ISO/TC 22/SC 10
ISO 16850:2007/Amd 1:2013
60.60 43.020ISO/TC 22/SC 10
ISO/PAS 16898:2012
Electrically propelled road vehicles -- Dimensions and designation of secondary lithium-ion cells
60.60 43.120ISO/TC 22/SC 21
ISO/TS 16951:2004
Road vehicles -- Ergonomic aspects of transport information and control systems (TICS) -- Procedures for determining priority of on-board messages presented to drivers
90.93 43.040.15
13.180
35.240.60
ISO/TC 22/SC 13
ISO 17215-1:2014
Road vehicles -- Video communication interface for cameras (VCIC) -- Part 1: General information and use case definition
60.60 43.040.15ISO/TC 22/SC 3
ISO 17215-2:2014
Road vehicles -- Video communication interface for cameras (VCIC) -- Part 2: Service discovery and control
60.60 43.040.15ISO/TC 22/SC 3
ISO 17215-3:2014
Road vehicles -- Video communication interface for cameras (VCIC) -- Part 3: Camera message dictionary
60.60 43.040.15ISO/TC 22/SC 3
ISO 17215-4:2014
Road vehicles -- Video communication interface for cameras (VCIC) -- Part 4: Implementation of communication requirements
60.60 43.040.15ISO/TC 22/SC 3
ISO/TS 17242:2014
Quasi-static calibration procedure for belt force transducers
60.60 43.040.80ISO/TC 22/SC 12
ISO 17287:2003
Road vehicles -- Ergonomic aspects of transport information and control systems -- Procedure for assessing suitability for use while driving
90.20 43.040.15
13.180
ISO/TC 22/SC 13
ISO 17288-1:2011
Passenger cars -- Free-steer behaviour -- Part 1: Steering-release open-loop test method
60.60 43.100ISO/TC 22/SC 9
ISO 17288-2:2011
Passenger cars -- Free-steer behaviour -- Part 2: Steering-pulse open-loop test method
60.60 43.100ISO/TC 22/SC 9
ISO 17356-1:2005
Road vehicles -- Open interface for embedded automotive applications -- Part 1: General structure and terms, definitions and abbreviated terms
90.20 43.040.15ISO/TC 22/SC 3
ISO 17356-2:2005
Road vehicles -- Open interface for embedded automotive applications -- Part 2: OSEK/VDX specifications for binding OS, COM and NM
90.20 43.040.15ISO/TC 22/SC 3
ISO 17356-3:2005
Road vehicles -- Open interface for embedded automotive applications -- Part 3: OSEK/VDX Operating System (OS)
90.20 43.040.15ISO/TC 22/SC 3
ISO 17356-4:2005
Road vehicles -- Open interface for embedded automotive applications -- Part 4: OSEK/VDX Communication (COM)
90.20 43.040.15ISO/TC 22/SC 3
ISO 17356-5:2006
Road vehicles -- Open interface for embedded automotive applications -- Part 5: OSEK/VDX Network Management (NM)
90.20 43.040.15ISO/TC 22/SC 3
ISO 17356-6:2006
Road vehicles -- Open interface for embedded automotive applications -- Part 6: OSEK/VDX Implementation Language (OIL)
90.20 43.040.15ISO/TC 22/SC 3
ISO 17373:2005
Road vehicles -- Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
90.93 43.020ISO/TC 22/SC 10
ISO 17458-1:2013
Road vehicles -- FlexRay communications system -- Part 1: General information and use case definition
60.60 43.040.15ISO/TC 22/SC 3
ISO 17458-2:2013
Road vehicles -- FlexRay communications system -- Part 2: Data link layer specification
60.60 43.040.15ISO/TC 22/SC 3
ISO 17458-3:2013
Road vehicles -- FlexRay communications system -- Part 3: Data link layer conformance test specification
60.60 43.040.15ISO/TC 22/SC 3
ISO 17458-4:2013
Road vehicles -- FlexRay communications system -- Part 4: Electrical physical layer specification
60.60 43.040.15ISO/TC 22/SC 3
ISO 17458-5:2013
Road vehicles -- FlexRay communications system -- Part 5: Electrical physical layer conformance test specification
60.60 43.040.15ISO/TC 22/SC 3
ISO 17479:2013
Motorcycles -- Measurement methods for gaseous exhaust emissions during inspection or maintenance
60.60 13.040.50
43.140
ISO/TC 22/SC 22
ISO 17949:2013
Impact test procedures for road vehicles -- Seating and positioning procedures for anthropomorphic test devices -- Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions
60.60 43.180ISO/TC 22/SC 10
ISO 18207:2006
Road vehicles -- Trailers up to 3,5 t -- Control of welded towing brackets for coupling ball after fatigue testing
90.93 43.100
43.040.70
ISO/TC 22/SC 4
ISO/TS 18506:2014
Procedure to construct injury risk curves for the evaluation of road user protection in crash tests
60.60 43.020ISO/TC 22/SC 12
ISO 18542-1:2012
Road vehicles -- Standardized repair and maintenance information (RMI) terminology -- Part 1: General information and use case definition
60.60 43.180
43.040.15
01.040.43
ISO/TC 22/SC 3
ISO 18542-2:2014
Road vehicles -- Standardized repair and maintenance information (RMI) terminology -- Part 2: Standardized process implementation requirements, Registration Authority
60.60 01.040.43
43.040.15
43.180
ISO/TC 22/SC 3
ISO/TS 18571:2014
Road vehicles -- Objective rating metric for non-ambiguous signals
60.60 43.040.01ISO/TC 22/SC 10
ISO 18669-1:2013
Internal combustion engines -- Piston pins -- Part 1: General specifications
60.60 43.060.10ISO/TC 22
ISO 18669-2:2004
Internal combustion engines -- Piston pins -- Part 2: Inspection measuring principles
90.92 43.060.10ISO/TC 22
ISO 18868:2013
Commercial road vehicles -- Coupling equipment between vehicles in multiple vehicle combinations -- Strength requirements
60.60 43.040.70ISO/TC 22/SC 15
ISO 19072-1:2014
Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 1: Pocket interface definition
60.60 43.040.10ISO/TC 22/SC 3
ISO 19072-2:2013
Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 2: Test methods and general performance requirements
60.60 43.040.10ISO/TC 22/SC 3
ISO/TS 19072-3:2012
Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 3: Pyrotechnic device and harness connector assembly - type 1
60.60 43.040.10ISO/TC 22/SC 3
ISO/TS 19072-4:2012
Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 4: Pyrotechnic device and harness connector assembly - type 2
60.60 43.040.10ISO/TC 22/SC 3
ISO 19438:2003
Diesel fuel and petrol filters for internal combustion engines -- Filtration efficiency using particle counting and contaminant retention capacity
90.60 43.060.40ISO/TC 22/SC 7
ISO/TS 19713-1:2010
Road vehicles -- Inlet air cleaning equipment for internal combustion engines and compressors -- Part 1: Fractional efficiency testing with fine particles (0,3 µm to 5 µm optical diameter)
90.60 43.060.20ISO/TC 22/SC 7
ISO/TS 19713-2:2010
Road vehicles -- Inlet air cleaning equipment for internal combustion engines and compressors -- Part 2: Fractional efficiency testing with coarse particles (5 µm to 40 µm optical diameter)
90.60 43.060.20ISO/TC 22/SC 7
ISO 19813:2006
Road vehicles -- Ignition systems -- Test methods and requirements for high voltage boots on plug-top coils and pencil coils
90.93 43.040.10ISO/TC 22/SC 1
ISO 20176:2011
Road vehicles -- H-point machine (HPM-II) -- Specifications and procedure for H-point determination
60.60 43.020ISO/TC 22/SC 13
ISO 20653:2013
Road vehicles -- Degrees of protection (IP code) -- Protection of electrical equipment against foreign objects, water and access
60.60 43.040.10ISO/TC 22/SC 3
ISO/TS 20825:2003
Road vehicles -- Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes -- Wear limits for in-use mechanical couplings
90.60 43.040.70ISO/TC 22/SC 15
ISO 20826:2006
Automotive LPG components -- Containers
90.60 43.060.40ISO/TC 22/SC 25
ISO 20828:2006
Road vehicles -- Security certificate management
90.93 43.020ISO/TC 22/SC 3
ISO 20860-1:2008
Road vehicles -- 50 ohms impedance radio frequency connection system interface -- Part 1: Dimensions and electrical requirements
90.93 43.040.10ISO/TC 22
ISO 20860-2:2009
Road vehicles -- 50 ohms impedance radio frequency connection system interface -- Part 2: Test procedures
90.93 43.040.10ISO/TC 22
ISO 20918:2007
Road vehicles -- Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems -- Test with roller brake tester
90.93 43.040.40ISO/TC 22/SC 2
ISO 21069-1:2004
Road vehicles -- Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester -- Part 1: Pneumatic braking systems
90.60 43.040.40ISO/TC 22/SC 2
ISO 21069-2:2008
Road vehicles -- Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester -- Part 2: Air over hydraulic and purely hydraulic braking systems
90.60 43.040.40ISO/TC 22/SC 2
ISO/PAS 21308-1:2007
Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 1: General principles
90.92 43.080.01ISO/TC 22/SC 15
ISO 21308-2:2006
Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 2: Dimensional bodywork exchange parameters
90.60 43.080.01ISO/TC 22/SC 15
ISO 21308-3:2007
Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 3: General, mass and administrative exchange parameters
90.60 43.080.01ISO/TC 22/SC 15
ISO/TS 21308-4:2007
Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 4: Mapping to STEP application protocol 239
90.60 43.080.01ISO/TC 22/SC 15
ISO 21308-5:2014
Road vehicles -- Product data exchange between chassis and body work manufacturers (BEP) -- Part 5: Coding of loader crane bodywork
60.60 43.080.01ISO/TC 22/SC 15
ISO/TS 21609:2014
Road vehicles -- (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
60.60 33.100.01
43.040.10
ISO/TC 22/SC 3
ISO 21750:2006
Road vehicles -- Safety enhancement in conjunction with tyre inflation pressure monitoring
90.93 83.160.10
43.040.80
ISO/TC 22
ISO 21848:2005
Road vehicles -- Electrical and electronic equipment for a supply voltage of 42 V -- Electrical loads
90.20 43.040.10ISO/TC 22/SC 3
ISO 21994:2007
Passenger cars -- Stopping distance at straight-line braking with ABS -- Open-loop test method
90.93 43.040.40ISO/TC 22/SC 9
ISO 21995:2008
Road vehicles -- Test of vehicle air braking systems with a permissible mass of over 3,5 t -- Acquisition and use of reference values using a roller brake tester
90.60 43.040.40ISO/TC 22/SC 2
ISO/TS 22239-1:2009
Road vehicles -- Child seat presence and orientation detection system (CPOD) -- Part 1: Specifications and test methods
90.92 43.040.80ISO/TC 22/SC 12
ISO/TS 22239-2:2009
Road vehicles -- Child seat presence and orientation detection system (CPOD) -- Part 2: Resonator specification
90.92 43.040.80ISO/TC 22/SC 12
ISO/TS 22239-3:2009
Road vehicles -- Child seat presence and orientation detection system (CPOD) -- Part 3: Labelling
90.92 43.040.80ISO/TC 22/SC 12
ISO/TS 22240:2008
Road vehicles -- Vehicles safety information model (VSIM)
90.93 43.040.80ISO/TC 22/SC 12
ISO 22241-1:2006
Diesel engines -- NOx reduction agent AUS 32 -- Part 1: Quality requirements
90.92 43.060.40ISO/TC 22/SC 5
ISO 22241-2:2006
Diesel engines -- NOx reduction agent AUS 32 -- Part 2: Test methods
90.92 43.060.40ISO/TC 22/SC 5
ISO 22241-2:2006/Cor 1:2008
60.60 43.060.40ISO/TC 22/SC 5
ISO 22241-3:2008
Diesel engines -- NOx reduction agent AUS 32 -- Part 3: Handling, transportation and storing
90.92 43.060.40ISO/TC 22/SC 5
ISO 22241-4:2009
Diesel engines -- NOx reduction agent AUS 32 -- Part 4: Refilling interface
90.92 43.060.40ISO/TC 22/SC 5
ISO 22241-5:2012
Diesel engines -- NOx reduction agent AUS 32 -- Part 5: Refilling interface for passenger cars
60.60 43.060.40ISO/TC 22/SC 5
ISO/PAS 22574:2007
Road vehicles -- Brake linings frictions materials -- Visual inspection
90.93 43.040.40ISO/TC 22/SC 2
ISO 22628:2002
Road vehicles -- Recyclability and recoverability -- Calculation method
90.93 43.020ISO/TC 22
ISO 22896:2006
Road vehicles -- Deployment and sensor bus for occupant safety systems
90.60 43.040.80ISO/TC 22/SC 3
ISO 22900-1:2008
Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 1: Hardware design requirements
90.93 43.040.15ISO/TC 22/SC 3
ISO 22900-2:2009
Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 2: Diagnostic protocol data unit application programming interface (D-PDU API)
90.92 43.040.15ISO/TC 22/SC 3
ISO 22900-3:2012
Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 3: Diagnostic server application programming interface (D-Server API)
60.60 43.040.15ISO/TC 22/SC 3
ISO 22901-1:2008
Road vehicles -- Open diagnostic data exchange (ODX) -- Part 1: Data model specification
90.93 43.180ISO/TC 22/SC 3
ISO 22901-2:2011
Road vehicles -- Open diagnostic data exchange (ODX) -- Part 2: Emissions-related diagnostic data
60.60 43.180ISO/TC 22/SC 3
ISO 22902-1:2006
Road vehicles -- Automotive multimedia interface -- Part 1: General technical overview
90.20 43.040.15ISO/TC 22/SC 3
ISO 22902-2:2006
Road vehicles -- Automotive multimedia interface -- Part 2: Use cases
90.20 43.040.15ISO/TC 22/SC 3
ISO 22902-3:2006
Road vehicles -- Automotive multimedia interface -- Part 3: System requirements
90.20 43.040.15ISO/TC 22/SC 3
ISO 22902-4:2006
Road vehicles -- Automotive multimedia interface -- Part 4: Network protocol requirements for vehicle interface access
90.20 43.040.15ISO/TC 22/SC 3
ISO 22902-5:2006
Road vehicles -- Automotive multimedia interface -- Part 5: Common message set
90.20 43.040.15ISO/TC 22/SC 3
ISO 22902-6:2006
Road vehicles -- Automotive multimedia interface -- Part 6: Vehicle interface requirements
90.20 43.040.15ISO/TC 22/SC 3
ISO 22902-7:2006
Road vehicles -- Automotive multimedia interface -- Part 7: Physical specification
90.20 43.040.15ISO/TC 22/SC 3
ISO 23273:2013
Fuel cell road vehicles -- Safety specifications -- Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
60.60 43.120ISO/TC 22/SC 21
ISO 23274-1:2013
Hybrid-electric road vehicles -- Exhaust emissions and fuel consumption measurements -- Part 1: Non-externally chargeable vehicles
60.60 43.120ISO/TC 22/SC 21
ISO 23274-2:2012
Hybrid-electric road vehicles -- Exhaust emissions and fuel consumption measurements -- Part 2: Externally chargeable vehicles
60.60 43.120ISO/TC 22/SC 21
ISO 23828:2013
Fuel cell road vehicles -- Energy consumption measurement -- Vehicles fuelled with compressed hydrogen
60.60 43.120ISO/TC 22/SC 21
ISO 25981:2008
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
90.93 43.040.10ISO/TC 22/SC 3
ISO 25981:2008/Cor 1:2008
60.60 43.040.10ISO/TC 22/SC 3
ISO 26021-1:2008
Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 1: General information and use case definitions
90.93 43.040.80ISO/TC 22/SC 3
ISO 26021-2:2008
Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 2: Communication requirements
90.92 43.040.80ISO/TC 22/SC 3
ISO 26021-2:2008/Cor 1:2009
60.60 43.040.80ISO/TC 22/SC 3
ISO 26021-3:2009
Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 3: Tool requirements
90.93 43.040.80ISO/TC 22/SC 3
ISO 26021-4:2009
Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 4: Additional communication line with bidirectional communication
90.93 43.040.80ISO/TC 22/SC 3
ISO 26021-5:2009
Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 5: Additional communication line with pulse width modulated signal
90.93 43.040.80ISO/TC 22/SC 3
ISO 26022:2010
Road vehicles -- Ergonomic aspects of transport information and control systems -- Simulated lane change test to assess in-vehicle secondary task demand
60.60 13.180
43.040.15
ISO/TC 22/SC 13
ISO 26262-1:2011
Road vehicles -- Functional safety -- Part 1: Vocabulary
60.60 01.040.43
43.040.10
ISO/TC 22/SC 3
ISO 26262-2:2011
Road vehicles -- Functional safety -- Part 2: Management of functional safety
60.60 43.040.10ISO/TC 22/SC 3
ISO 26262-3:2011
Road vehicles -- Functional safety -- Part 3: Concept phase
60.60 43.040.10ISO/TC 22/SC 3
ISO 26262-4:2011
Road vehicles -- Functional safety -- Part 4: Product development at the system level
60.60 43.040.10ISO/TC 22/SC 3
ISO 26262-5:2011
Road vehicles -- Functional safety -- Part 5: Product development at the hardware level
60.60 43.040.10ISO/TC 22/SC 3
ISO 26262-6:2011
Road vehicles -- Functional safety -- Part 6: Product development at the software level
60.60 43.040.10ISO/TC 22/SC 3
ISO 26262-7:2011
Road vehicles -- Functional safety -- Part 7: Production and operation
60.60 43.040.10ISO/TC 22/SC 3
ISO 26262-8:2011
Road vehicles -- Functional safety -- Part 8: Supporting processes
60.60 43.040.10ISO/TC 22/SC 3
ISO 26262-9:2011
Road vehicles -- Functional safety -- Part 9: Automotive Safety Integrity Level (ASIL)-oriented and safety-oriented analyses
60.60 43.040.10ISO/TC 22/SC 3
ISO 26262-10:2012
Road vehicles -- Functional safety -- Part 10: Guideline on ISO 26262
60.60 43.040.10ISO/TC 22/SC 3
ISO 26865:2009
Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes
90.60 43.040.40ISO/TC 22/SC 2
ISO 26866:2009
Road vehicles -- Brake lining friction materials -- Standard wear test procedure for commercial vehicles with air brakes
90.60 43.040.40ISO/TC 22/SC 2
ISO 26867:2009
Road vehicles -- Brake lining friction materials -- Friction behaviour assessment for automotive brake systems
90.60 43.040.40ISO/TC 22/SC 2
ISO 27145-1:2012
Road vehicles -- Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements -- Part 1: General information and use case definition
60.60 43.040.10
43.180
ISO/TC 22/SC 3
ISO 27145-2:2012
Road vehicles -- Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements -- Part 2: Common data dictionary
60.60 43.040.10
43.180
ISO/TC 22/SC 3
ISO 27145-3:2012
Road vehicles -- Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements -- Part 3: Common message dictionary
60.60 43.180
43.040.10
ISO/TC 22/SC 3
ISO 27145-4:2012
Road vehicles -- Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements -- Part 4: Connection between vehicle and test equipment
60.60 43.180
43.040.10
ISO/TC 22/SC 3
ISO 27667:2011
Road vehicles -- Brake lining friction materials -- Evaluation of corrosion effects on painted backing plates and brake shoes
60.60 43.040.40ISO/TC 22/SC 2
ISO 27955:2010
Road vehicles -- Securing of cargo in passenger cars, station wagons and multi-purpose vehicles -- Requirements and test methods
60.60 43.020ISO/TC 22/SC 12
ISO 27956:2009
Road vehicles -- Securing of cargo in delivery vans -- Requirements and test methods
90.93 43.020ISO/TC 22/SC 12
ISO/TR 27957:2008
Road vehicles -- Temperature measurement in anthropomorphic test devices -- Definition of the temperature sensor locations
60.60 43.180ISO/TC 22/SC 12
ISO 28741:2013
Road vehicles -- Spark-plugs and their cylinder head housings -- Basic characteristics and dimensions
60.60 43.060.50ISO/TC 22/SC 1
ISO 28981:2009
Mopeds - Methods for setting the running resistance on a chassis dynamometer
90.93 43.140ISO/TC 22/SC 23
ISO 29061-1:2010
Road vehicles -- Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems -- Part 1: Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments
60.60 43.040.80ISO/TC 22/SC 12
ISO/TS 29062:2009
Road vehicles - Child restraint systems - Sled test method to enable the evaluation of side impact protection
90.93 43.040.80ISO/TC 22/SC 12