Items to be displayed:
| Subcommittee | Subcommittee Title |
|---|---|
| ISO/TC 20/SC 1 | Aerospace electrical requirements |
| ISO/TC 20/SC 4 | Aerospace fastener systems |
| ISO/TC 20/SC 6 | Standard atmosphere |
| ISO/TC 20/SC 8 | Aerospace terminology |
| ISO/TC 20/SC 9 | Air cargo and ground equipment |
| ISO/TC 20/SC 10 | Aerospace fluid systems and components |
| ISO/TC 20/SC 13 | Space data and information transfer systems |
| ISO/TC 20/SC 14 | Space systems and operations |
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 43:1976 Aircraft -- Jacking pads | 90.20 | 49.100 |
| ISO 44:1975 Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation | 90.93 | 49.060 |
| ISO 46:1973 Aircraft -- Fuel nozzle grounding plugs and sockets | 90.93 | 49.100 |
| ISO/TR 224:1998 Aircraft -- Declaration of design and performance for aircraft equipment -- Standard form | 60.60 | 49.020 |
| ISO 244:1979 Aircraft -- Sealing wire | 90.93 | 49.030.99 |
| ISO 268:1980 Aircraft -- Mechanical and electromechanical indicators -- General requirements | 90.93 | 49.090 |
| ISO 413:1974 Aircraft -- Heads of lubricating nipples | 90.93 | 49.100 49.035 |
| ISO 482:1977 Aircraft -- Propulsion units and components -- Methods of numbering and describing direction of rotation | 90.60 | 49.050 |
| ISO 1002:1983 Rolling bearings -- Airframe bearings -- Characteristics, boundary dimensions, tolerances, static load ratings | 90.93 | 49.035 |
| ISO 1021:1980 Aircraft -- Engine nacelle fire extinguisher apertures and doors | 90.93 | 49.100 |
| ISO 1971:1975 Aircraft -- Accessory drives and mounting pads | 90.93 | 49.035 |
| ISO 2020-1:1997 Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 1: Dimensions and loads | 90.60 | 49.035 |
| ISO 2020-2:1997 Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 2: Technical specification | 90.60 | 49.035 |
| ISO 2669:1995 Environmental tests for aircraft equipment -- Steady-state acceleration | 90.93 | 49.020 |
| ISO 2671:1982 Environmental tests for aircraft equipment -- Part 3.4 : Acoustic vibration | 90.60 | 17.140.30 49.020 |
| ISO 2685:1998 Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones | 90.20 | 49.020 |
| ISO 4153:1981 Aircraft -- Pressure fuel dispensing system -- Test procedure and limit value for shut-off surge pressure | 90.93 | 49.050 49.100 |
| ISO 7137:1995 Aircraft -- Environmental conditions and test procedures for airborne equipment | 90.93 | 49.020 |
| ISO 7938:1986 Aircraft -- Ball bearings for control cable pulleys -- Dimensions and loads | 90.93 | 49.035 |
| ISO 7939:1988 Aircraft -- Non-metallic pulleys with ball bearings for control cables -- Dimensions and loads | 90.20 | 49.035 |
| ISO 8074:1985 Aerospace -- Surface treatment of austenitic stainless steel parts | 90.93 | 49.040 |
| ISO 8075:1985 Aerospace -- Surface treatment of hardenable stainless steel parts | 90.93 | 49.040 |
| ISO 8078:1984 Aerospace process -- Anodic treatment of aluminium alloys -- Sulfuric acid process, undyed coating | 90.93 | 49.040 |
| ISO 8079:1984 Aerospace process -- Anodic treatment of aluminium alloys -- Sulfuric acid process, dyed coating | 90.93 | 49.040 |
| ISO 8080:1985 Aerospace -- Anodic treatment of titanium and titanium alloys -- Sulfuric acid process | 90.93 | 49.040 |
| ISO 8081:1985 Aerospace process -- Chemical conversion coating for aluminium alloys -- General purpose | 90.93 | 49.040 |
| ISO 8399-1:1998 Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 1: Design criteria | 90.20 | 49.035 |
| ISO 8399-2:1998 Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 2: Dimensions | 90.20 | 49.035 |
| ISO 8591-1:1989 Aerospace -- Wrought aluminium and aluminium alloys -- Inspection, testing and supply requirements -- Part 1: General requirements | 90.93 | 49.025.20 |
| ISO 9216:2002 Aerospace -- Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses | 90.20 | 49.030.30 |
| ISO 9217:2002 Aerospace -- Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses | 90.20 | 49.030.50 |
| ISO 9218:2002 Aerospace -- Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses | 90.20 | 49.030.50 |
| ISO 9219:2002 Aerospace -- Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated -- Dimensions and masses | 90.20 | 49.030.20 |
| ISO 9662:1994 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests | 90.93 | 49.020 |
| ISO 9736:2000 Aerospace -- Eye-ends, in steel, threaded, for aircraft control wire rope -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9737:2000 Aerospace -- Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9738:2000 Aerospace -- Turnbarrels, for aircraft control wire rope -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9747:2000 Aerospace -- Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9748:2000 Aerospace -- Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9749:2000 Aerospace -- Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9757:2000 Aerospace -- Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9758:2000 Aerospace -- Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9759:2000 Aerospace -- Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9760:2000 Aerospace -- Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings -- Dimensions and loads | 90.93 | 49.035 |
| ISO 9761:2000 Aerospace -- Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles -- Dimensions | 90.93 | 49.035 |
| ISO 9762:2000 Aerospace -- Aircraft control wire rope assemblies -- Dimensions and end-fitting combinations | 90.93 | 49.035 |
| ISO 9763:1999 Aerospace -- Aircraft control wire rope assemblies -- Technical specification | 90.93 | 49.035 |
| ISO/TR 10201:2001 Aerospace -- Standards for electronic instruments and systems | 60.60 | 49.090 |
| ISO 10792-1:1995 Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 1: Metric series | 90.60 | 49.035 |
| ISO 10792-2:1995 Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 2: Inch series | 90.60 | 49.035 |
| ISO 10792-3:1995 Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 3: Technical specification | 90.60 | 49.035 |
| ISO 10955:1999 Aerospace -- End-fittings and turnbarrels for aircraft control wire rope -- Technical specification | 90.93 | 49.035 |
| ISO 13411:1997 Aerospace -- Airframe needle roller, cylindrical roller and track roller bearings -- Technical specification | 90.20 | 49.035 |
| ISO 13412:1997 Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Inch series | 90.20 | 49.035 |
| ISO 13413:1997 Aerospace -- Airframe needle track roller, yoke type, double-row, sealed -- Inch series | 90.20 | 49.035 |
| ISO 13414:1997 Aerospace -- Airframe needle roller bearings, single-row, shielded -- Inch series | 90.20 | 49.035 |
| ISO 13415:1997 Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Inch series | 90.20 | 49.035 |
| ISO 13416:1997 Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Metric series | 90.20 | 49.035 |
| ISO 13417:1997 Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Metric series | 90.20 | 49.035 |
| ISO 14190:1998 Aerospace -- Airframe rolling bearings: ball and spherical roller bearings -- Technical specification | 90.20 | 49.035 |
| ISO 14191:1998 Aerospace -- Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 -- Metric series | 90.20 | 49.035 |
| ISO 14192:1998 Aerospace -- Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty -- Metric series | 90.20 | 49.035 |
| ISO 14193:1998 Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty -- Inch series | 90.20 | 49.035 |
| ISO 14194:1998 Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty -- Inch series | 90.20 | 49.035 |
| ISO 14195:1998 Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty -- Inch series | 90.20 | 49.035 |
| ISO 14196:1998 Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty -- Inch series | 90.20 | 49.035 |
| ISO 14197:1998 Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty -- Inch series | 90.20 | 49.035 |
| ISO 14201:1998 Aerospace -- Airframe ball bearings, double-row, self-aligning, diameter series 2 -- Metric series | 90.20 | 49.035 |
| ISO 14202:1998 Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 0 and 2 -- Metric series | 90.20 | 49.035 |
| ISO 14203:1998 Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 8 and 9 -- Metric series | 90.20 | 49.035 |
| ISO 14204:1998 Aerospace -- Airframe ball bearings, double-row, rigid, diameter series 0 -- Metric series | 90.20 | 49.035 |
| ISO 14206:1998 Aerospace -- Airframe ball bearings, single-row, rigid, sealed, light duty -- Inch series | 90.20 | 49.035 |
| ISO 14207:1998 Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, light duty -- Inch series | 90.20 | 49.035 |
| ISO 14208:1998 Aerospace -- Airframe ball bearings, single-row, rigid, sealed, intermediate duty -- Inch series | 90.20 | 49.035 |
| ISO 14209:1998 Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty -- Inch series | 90.20 | 49.035 |
| ISO 14210:1998 Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty -- Inch series | 90.20 | 49.035 |
| ISO 14211:1998 Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty -- Inch series | 90.20 | 49.035 |
| ISO 14212:1998 Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty -- Inch series | 90.20 | 49.035 |
| ISO 14213:1998 Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra-light duty -- Inch series | 90.20 | 49.035 |
| ISO 14214:1998 Aerospace -- Airframe ball bearings, double-row, rigid, sealed, heavy duty -- Inch series | 90.20 | 49.035 |
| ISO 14215:1998 Aerospace -- Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty -- Inch series | 90.20 | 49.035 |
| ISO 14216:1998 Aerospace -- Airframe ball bearings, double-row, self-aligning, sealed, heavy duty -- Inch series | 90.20 | 49.035 |
| ISO 14217:1998 Aerospace -- Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty -- Inch series | 90.20 | 49.035 |
| ISO 14218:1998 Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, heavy duty -- Inch series | 90.20 | 49.035 |
| ISO 14219:1998 Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty -- Inch series | 90.20 | 49.035 |
| ISO 14220:1998 Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, light duty -- Inch series | 90.20 | 49.035 |
| ISO 14221:1998 Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty -- Inch series | 90.20 | 49.035 |
| ISO 21849:2006 Aircraft and space -- Industrial data -- Product identification and traceability | 90.93 | 49.020 35.240.60 |
