Home

Standards catalogue

Subscribe to updates

ISO/TC 17  - Steel

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 17 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 377:2013
Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
60.60 77.040.10ISO/TC 17/SC 20
ISO 404:2013
Steel and steel products -- General technical delivery requirements
60.60 77.080.20
77.140.01
ISO/TC 17/SC 20
ISO 437:1982
Steel and cast iron -- Determination of total carbon content -- Combustion gravimetric method
90.92 77.080.01ISO/TC 17/SC 1
ISO 439:1994
Steel and iron -- Determination of total silicon content -- Gravimetric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 629:1982
Steel and cast iron -- Determination of manganese content -- Spectrophotometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 630-1:2011
Structural steels -- Part 1: General technical delivery conditions for hot-rolled products
60.60 77.140.01ISO/TC 17/SC 3
ISO 630-2:2011
Structural steels -- Part 2: Technical delivery conditions for structural steels for general purposes
60.60 77.140.01ISO/TC 17/SC 3
ISO 630-3:2012
Structural steels -- Part 3: Technical delivery conditions for fine-grain structural steels
60.60 77.140.01ISO/TC 17/SC 3
ISO 630-4:2012
Structural steels -- Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
60.60 77.140.01ISO/TC 17/SC 3
ISO 630-5:2014
Structural steels -- Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
60.60 77.140.20ISO/TC 17/SC 3
ISO 630-6:2014
Structural steels -- Part 6: Technical delivery conditions for seismic-proof improved structural steels for building
60.60 77.140.70
91.120.25
ISO/TC 17/SC 3
ISO 642:1999
Steel -- Hardenability test by end quenching (Jominy test)
90.93 77.040.99ISO/TC 17/SC 7
ISO 643:2012
Steels -- Micrographic determination of the apparent grain size
90.92 77.040.99ISO/TC 17/SC 7
ISO 657-1:1989
Hot-rolled steel sections -- Part 1: Equal-leg angles -- Dimensions
90.93 77.140.70ISO/TC 17/SC 3
ISO 657-2:1989
Hot-rolled steel sections -- Part 2: Unequal-leg angles -- Dimensions
90.93 77.140.70ISO/TC 17/SC 3
ISO 657-5:1976
Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series
90.93 77.140.70ISO/TC 17/SC 3
ISO 657-11:1980
Hot-rolled steel sections -- Part 11: Sloping flange channel sections (Metric series) -- Dimensions and sectional properties
90.93 77.140.70ISO/TC 17/SC 3
ISO 657-15:1980
Hot-rolled steel sections -- Part 15: Sloping flange beam sections (Metric series) -- Dimensions and sectional properties
90.93 77.140.70ISO/TC 17/SC 3
ISO 657-16:1980
Hot-rolled steel sections -- Part 16: Sloping flange column sections (metric series) -- Dimensions and sectional properties
90.93 77.140.70ISO/TC 17/SC 3
ISO 657-18:1980
Hot-rolled steel sections -- Part 18: L sections for shipbuilding (metric series) -- Dimensions, sectional properties and tolerances
90.93 77.140.70
47.020.05
ISO/TC 17/SC 3
ISO 657-19:1980
Hot-rolled steel sections -- Part 19: Bulb flats (metric series) -- Dimensions, sectional properties and tolerances
90.93 77.140.70ISO/TC 17/SC 3
ISO 657-21:1983
Hot-rolled steel sections -- Part 21: T-sections with equal depth and flange width -- Dimensions
90.93 77.140.70ISO/TC 17/SC 3
ISO 671:1982
Steel and cast iron -- Determination of sulphur content -- Combustion titrimetric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 683-1:2012
Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Non-alloy steels for quenching and tempering·
60.60 77.140.10
77.140.20
77.140.45
ISO/TC 17/SC 4
ISO 683-2:2012
Heat-treatable steels, alloy steels and free-cutting steels -- Part 2: Alloy steels for quenching and tempering
60.60 77.140.10
77.140.20
77.140.45
ISO/TC 17/SC 4
ISO 683-3:2014
Heat-treatable steels, alloy steels and free-cutting steels -- Part 3: Case-hardening steels
60.60 77.140.10
77.140.20
ISO/TC 17/SC 4
ISO 683-4:2014
Heat-treatable steels, alloy steels and free-cutting steels -- Part 4: Free-cutting steels
60.60 77.140.10
77.140.20
ISO/TC 17/SC 4
ISO 683-5:2014
Heat treatable steels, alloy steels and free-cutting steels -- Part 5: Nitriding steels
60.60 77.140.10
77.140.20
ISO/TC 17/SC 4
ISO 683-14:2004
Heat-treatable steels, alloy steels and free-cutting steels -- Part 14: Hot-rolled steels for quenched and tempered springs
90.93 77.140.25ISO/TC 17/SC 4
ISO 683-15:1992
Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines
90.93 77.140.20
27.020
77.140.10
ISO/TC 17/SC 4
ISO 683-17:2014
Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels
60.60 77.140.10
77.140.20
ISO/TC 17/SC 4
ISO 683-18:2014
Heat-treatable steels, alloy steels and free-cutting steels -- Part 18: Bright steel products
60.60 77.140.10
77.140.20
77.140.45
ISO/TC 17/SC 4
ISO 1005-1:1994
Railway rolling stock material -- Part 1: Rough-rolled tyres for tractive and trailing stock -- Technical delivery conditions
90.93 45.060.01
77.140.99
ISO/TC 17/SC 15
ISO 1005-2:1986
Railway rolling stock material -- Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock -- Dimensional, balancing and assembly requirements
90.93 45.060.01
77.140.99
ISO/TC 17/SC 15
ISO 1005-3:1982
Railway rolling stock material -- Part 3: Axles for tractive and trailing stock -- Quality requirements
90.93 77.140.99
45.060.01
ISO/TC 17/SC 15
ISO 1005-4:1986
Railway rolling stock material -- Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock -- Quality requirements
90.93 45.060.01
77.140.99
ISO/TC 17/SC 15
ISO 1005-6:1994
Railway rolling stock material -- Part 6: Solid wheels for tractive and trailing stock -- Technical delivery conditions
90.93 45.060.01
77.140.99
ISO/TC 17/SC 15
ISO 1005-7:1982
Railway rolling stock material -- Part 7: Wheelsets for tractive and trailing stock -- Quality requirements
90.93 77.140.99
45.060.01
ISO/TC 17/SC 15
ISO 1005-8:1986
Railway rolling stock material -- Part 8: Solid wheels for tractive and trailing stock -- Dimensional and balancing requirements
90.93 77.140.99
45.060.01
ISO/TC 17/SC 15
ISO 1005-9:1986
Railway rolling stock material -- Part 9: Axles for tractive and trailing stock -- Dimensional requirements
90.93 45.060.01
77.140.99
ISO/TC 17/SC 15
ISO 1035-1:1980
Hot-rolled steel bars -- Part 1: Dimensions of round bars
90.93 77.140.60ISO/TC 17/SC 3
ISO 1035-2:1980
Hot-rolled steel bars -- Part 2: Dimensions of square bars
90.93 77.140.60ISO/TC 17/SC 3
ISO 1035-3:1980
Hot-rolled steel bars -- Part 3: Dimensions of flat bars
90.93 77.140.60ISO/TC 17/SC 3
ISO 1035-4:1982
Hot-rolled steel bars -- Part 4: Tolerances
90.93 77.140.60ISO/TC 17/SC 3
ISO 1052:1982
Steels for general engineering purposes
90.93 77.140.01ISO/TC 17/SC 3
ISO 2566-1:1984
Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels
90.93 77.040.10ISO/TC 17/SC 20
ISO 2566-2:1984
Steel -- Conversion of elongation values -- Part 2: Austenitic steels
90.93 77.040.10ISO/TC 17/SC 20
ISO 2605-3:1985
Steel products for pressure purposes -- Derivation and verification of elevated temperature properties -- Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
90.93 77.140.30ISO/TC 17/SC 10
ISO 2639:2002
Steels -- Determination and verification of the depth of carburized and hardened cases
90.92 77.040.99ISO/TC 17/SC 7
ISO 3573:2012
Hot-rolled carbon steel sheet of commercial and drawing qualities
60.60 77.140.50ISO/TC 17/SC 12
ISO 3574:2012
Cold-reduced carbon steel sheet of commercial and drawing qualities
60.60 77.140.50ISO/TC 17/SC 12
ISO 3575:2011
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
90.92 77.140.50ISO/TC 17/SC 12
ISO 3651-1:1998
Determination of resistance to intergranular corrosion of stainless steels -- Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
90.93 77.060ISO/TC 17/SC 7
ISO 3651-2:1998
Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid
90.93 77.060ISO/TC 17/SC 7
ISO 3754:1976
Steel -- Determination of effective depth of hardening after flame or induction hardening
90.92 77.040.99ISO/TC 17/SC 7
ISO 3755:1991
Cast carbon steels for general engineering purposes
90.93 77.140.80ISO/TC 17/SC 11
ISO 3763:1976
Wrought steels -- Macroscopic methods for assessing the content of non-metallic inclusions
90.93 77.040.99ISO/TC 17/SC 7
ISO 3887:2003
Steels -- Determination of depth of decarburization
90.93 77.040.99ISO/TC 17/SC 7
ISO 4829-1:1986
Steel and cast iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 1: Silicon contents between 0,05 and 1,0 %
90.92 77.080.01ISO/TC 17/SC 1
ISO 4829-2:1988
Steel and iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 2: Silicon contents between 0,01 and 0,05 %
90.92 77.080.01ISO/TC 17/SC 1
ISO 4885:1996
Ferrous products -- Heat treatments -- Vocabulary
90.92 77.140.01
25.200
01.040.77
01.040.25
ISO/TC 17
ISO 4934:2003
Steel and iron -- Determination of sulfur content -- Gravimetric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 4935:1989
Steel and iron -- Determination of sulfur content -- Infrared absorption method after combustion in an induction furnace
90.93 77.080.01ISO/TC 17/SC 1
ISO 4937:1986
Steel and iron -- Determination of chromium content -- Potentiometric or visual titration method
90.93 77.080.01ISO/TC 17/SC 1
ISO 4938:1988
Steel and iron -- Determination of nickel content -- Gravimetric or titrimetric method
90.92 77.080.01ISO/TC 17/SC 1
ISO 4939:1984
Steel and cast iron -- Determination of nickel content -- Dimethylglyoxime spectrophotometric method
90.92 77.080.01ISO/TC 17/SC 1
ISO 4940:1985
Steel and cast iron -- Determination of nickel content -- Flame atomic absorption spectrometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 4941:1994
Steel and iron -- Determination of molybdenum content -- Thiocyanate spectrophotometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 4942:1988
Steel and iron -- Determination of vanadium content -- N-BPHA spectrophotometric method
90.92 77.080.01ISO/TC 17/SC 1
ISO 4943:1985
Steel and cast iron -- Determination of copper content -- Flame atomic absorption spectrometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 4945:1977
Steel -- Determination of nitrogen content -- Spectrophotometric method
90.92 77.080.20ISO/TC 17/SC 1
ISO 4946:1984
Steel and cast iron -- Determination of copper content -- 2,2'-Diquinolyl spectrophotometric method
90.92 77.080.01ISO/TC 17/SC 1
ISO 4947:1986
Steel and cast iron -- Determination of vanadium content -- Potentiometric titration method
90.93 77.080.01ISO/TC 17/SC 1
ISO 4948-1:1982
Steels -- Classification -- Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition
90.93 77.080.20ISO/TC 17
ISO 4948-2:1981
Steels -- Classification -- Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics
90.93 77.080.20ISO/TC 17
ISO/TS 4949:2003
Steel names based on letter symbols
90.92 77.080.20ISO/TC 17
ISO 4950-1:1995
High yield strength flat steel products -- Part 1: General requirements
90.93 77.140.50ISO/TC 17/SC 3
ISO 4950-1:1995/Amd 1:2003
60.60 77.140.50ISO/TC 17/SC 3
ISO 4950-2:1995
High yield strength flat steel products -- Part 2: Products supplied in the normalized or controlled rolled condition
90.93 77.140.50ISO/TC 17/SC 3
ISO 4950-2:1995/Amd 1:2003
60.60 77.140.50ISO/TC 17/SC 3
ISO 4950-3:1995
High yield strength flat steel products -- Part 3: Products supplied in the heat-treated (quenched + tempered) condition
90.93 77.140.50ISO/TC 17/SC 3
ISO 4950-3:1995/Amd 1:2003
60.60 77.140.50ISO/TC 17/SC 3
ISO 4951-1:2001
High yield strength steel bars and sections -- Part 1: General delivery requirements
90.93 77.140.60
77.140.70
ISO/TC 17/SC 3
ISO 4951-2:2001
High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
90.93 77.140.60
77.140.70
ISO/TC 17/SC 3
ISO 4951-3:2001
High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels
90.93 77.140.60
77.140.70
ISO/TC 17/SC 3
ISO 4954:1993
Steels for cold heading and cold extruding
90.20 77.140.10
77.140.20
ISO/TC 17/SC 4
ISO 4955:2005
Heat-resistant steels
90.92 77.140.20ISO/TC 17/SC 4
ISO 4957:1999
Tool steels
90.20 77.140.35ISO/TC 17/SC 4
ISO 4960:2007
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
90.93 77.140.50ISO/TC 17/SC 12
ISO 4967:2013
Steel -- Determination of content of non-metallic inclusions -- Micrographic method using standard diagrams
60.60 77.040.99ISO/TC 17/SC 7
ISO 4968:1979
Steel -- Macrographic examination by sulfur print (Baumann method)
90.93 77.040.99ISO/TC 17/SC 7
ISO 4969:1980
Steel -- Macroscopic examination by etching with strong mineral acids
90.92 77.040.99ISO/TC 17/SC 7
ISO 4970:1979
Steel -- Determination of total or effective thickness of thin surface-hardened layers
90.92 77.040.99ISO/TC 17/SC 7
ISO 4978:1983
Flat rolled steel products for welded gas cylinders
90.93 77.140.30ISO/TC 17/SC 10
ISO 4986:2010
Steel castings -- Magnetic particle inspection
60.60 77.140.80
77.040.20
ISO/TC 17/SC 11
ISO 4987:2010
Steel castings -- Liquid penetrant inspection
60.60 77.140.80
77.040.20
ISO/TC 17/SC 11
ISO 4990:2003
Steel castings -- General technical delivery requirements
90.92 77.140.80ISO/TC 17/SC 11
ISO 4991:2005
Steel castings for pressure purposes
90.92 77.140.30
77.140.80
ISO/TC 17/SC 11
ISO 4992-1:2006
Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes
90.93 77.140.80
77.040.20
ISO/TC 17/SC 11
ISO 4992-2:2006
Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components
90.93 77.140.80
77.040.20
ISO/TC 17/SC 11
ISO 4993:2009
Steel and iron castings -- Radiographic inspection
90.92 77.140.80
77.040.20
ISO/TC 17/SC 11
ISO 4995:2014
Hot-rolled steel sheet of structural quality
60.60 77.140.50ISO/TC 17/SC 12
ISO 4996:2007
Hot-rolled steel sheet of high yield stress structural quality
90.92 77.140.50ISO/TC 17/SC 12
ISO 4997:2007
Cold-reduced carbon steel sheet of structural quality
90.92 77.140.50ISO/TC 17/SC 12
ISO 4998:2014
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
60.60 77.140.50ISO/TC 17/SC 12
ISO 4999:2014
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
60.60 77.140.50ISO/TC 17/SC 12
ISO 5000:2011
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
60.60 77.140.50ISO/TC 17/SC 12
ISO 5001:2012
Cold-reduced carbon steel sheet for vitreous enamelling
60.60 77.140.50ISO/TC 17/SC 12
ISO 5002:2013
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
60.60 77.140.50ISO/TC 17/SC 12
ISO 5003:1980
Flat bottom railway rails and special rail sections for switches and crossings of non-treated steel -- Technical delivery requirements
90.92 45.080ISO/TC 17/SC 15
ISO 5948:1994
Railway rolling stock material -- Ultrasonic acceptance testing
90.93 77.040.20
45.060.01
ISO/TC 17/SC 15
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs
90.93 77.040.99
77.140.35
77.140.10
77.140.20
ISO/TC 17/SC 7
ISO 5950:2012
Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
60.60 77.140.50ISO/TC 17/SC 12
ISO 5951:2013
Hot-rolled steel sheet of higher yield strength with improved formability
60.60 77.140.50ISO/TC 17/SC 12
ISO 5952:2011
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
60.60 77.140.50ISO/TC 17/SC 12
ISO 5954:2014
Cold-reduced carbon steel sheet according to hardness requirements
60.60 77.140.50ISO/TC 17/SC 12
ISO 6303:1981
Pressure vessel steels not included in ISO 2604, Parts 1 to 6 -- Derivation of long-time stress rupture properties
90.93 77.140.30ISO/TC 17/SC 10
ISO 6305-2:2007
Railway components -- Technical delivery requirements -- Part 2: Non-alloy carbon steel baseplates
90.93 45.080ISO/TC 17/SC 15
ISO 6305-3:1983
Railway components -- Technical delivery requirements -- Part 3: Steel sleepers
90.93 45.080ISO/TC 17/SC 15
ISO 6305-4:1985
Railway components -- Technical delivery requirements -- Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings
90.93 45.080ISO/TC 17/SC 15
ISO/TR 6306:1989
Chemical analysis of steel -- Order of listing elements
60.60 77.080.20ISO/TC 17/SC 20
ISO 6316:2012
Hot-rolled steel strip of structural quality
60.60 77.140.50ISO/TC 17/SC 12
ISO 6317:2008
Hot-rolled carbon steel strip of commercial and drawing qualities
90.93 77.140.50ISO/TC 17/SC 12
ISO 6758:1980
Welded steel tubes for heat exchangers
90.93 27.060.30
77.140.75
ISO/TC 17/SC 19
ISO 6759:1980
Seamless steel tubes for heat exchangers
90.93 27.060.30
77.140.75
ISO/TC 17/SC 19
ISO 6929:2013
Steel products -- Vocabulary
60.60 77.140.01
01.040.77
ISO/TC 17
ISO 6930-1:2001
High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels
90.93 77.140.50ISO/TC 17/SC 3
ISO 6930-2:2004
High yield strength steel plates and wide flats for cold forming -- Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels
90.92 77.140.50ISO/TC 17/SC 3
ISO 6931-1:1994
Stainless steels for springs -- Part 1: Wire
90.92 77.140.25ISO/TC 17/SC 4
ISO 6931-2:2005
Stainless steels for springs -- Part 2: Narrow strip
90.93 77.140.25ISO/TC 17/SC 4
ISO 6932:2014
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
60.60 77.140.50ISO/TC 17/SC 12
ISO 6933:1986
Railway rolling stock material -- Magnetic particle acceptance testing
90.93 45.060.01
77.040.20
ISO/TC 17/SC 15
ISO 6934-1:1991
Steel for the prestressing of concrete -- Part 1: General requirements
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 6934-2:1991
Steel for the prestressing of concrete -- Part 2: Cold-drawn wire
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 6934-3:1991
Steel for the prestressing of concrete -- Part 3: Quenched and tempered wire
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 6934-4:1991
Steel for the prestressing of concrete -- Part 4: Strand
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 6934-4:1991/Cor 1:1992
60.60 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 6934-4:1991/Cor 2:2000
60.60 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 6934-5:1991
Steel for the prestressing of concrete -- Part 5: Hot-rolled steel bars with or without subsequent processing
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 6935-1:2007
Steel for the reinforcement of concrete -- Part 1: Plain bars
90.93 91.080.40
77.140.15
ISO/TC 17/SC 16
ISO 6935-2:2007
Steel for the reinforcement of concrete -- Part 2: Ribbed bars
90.92 91.080.40
77.140.15
ISO/TC 17/SC 16
ISO 6935-3:1992
Steel for the reinforcement of concrete -- Part 3: Welded fabric
90.93 91.080.40
77.140.15
ISO/TC 17/SC 16
ISO 6935-3:1992/Cor 1:2000
60.60 91.080.40
77.140.15
ISO/TC 17/SC 16
ISO 7452:2013
Hot-rolled steel plates -- Tolerances on dimensions and shape
60.60 77.140.70
77.140.50
ISO/TC 17/SC 3
ISO/TR 7468:1981
Summary of average stress rupture properties of wrought steels for boilers and pressure vessels
60.60 77.140.30ISO/TC 17/SC 10
ISO 7778:2014
Through-thickness characteristics for steel products
60.60 77.140.50ISO/TC 17/SC 3
ISO 7788:1985
Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements
90.93 77.140.50ISO/TC 17/SC 3
ISO 7900:2006
Steel wire and wire products for fences -- Zinc- and zinc-alloy-coated steel barbed wire
90.93 91.090
77.140.65
ISO/TC 17/SC 17
ISO 7989-1:2006
Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 1: General principles
90.93 77.140.65
25.220.40
ISO/TC 17/SC 17
ISO 7989-2:2007
Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 2: Zinc or zinc-alloy coating
90.93 77.140.65
25.220.40
ISO/TC 17/SC 17
ISO 8458-1:2002
Steel wire for mechanical springs -- Part 1: General requirements
90.93 77.140.25ISO/TC 17/SC 17
ISO 8458-2:2002
Steel wire for mechanical springs -- Part 2: Patented cold-drawn non-alloy steel wire
90.93 77.140.25ISO/TC 17/SC 17
ISO 8458-3:2002
Steel wire for mechanical springs -- Part 3: Oil-hardened and tempered wire
90.93 77.140.25ISO/TC 17/SC 17
ISO 9034:1987
Hot-rolled structural steel wide flats -- Tolerances on dimensions and shape
90.93 77.140.50ISO/TC 17/SC 3
ISO 9042:1988
Steels -- Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
90.93 77.040.99ISO/TC 17/SC 7
ISO 9327-1:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements
90.93 77.140.30
77.140.85
ISO/TC 17/SC 10
ISO 9327-2:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties
90.93 77.140.30
77.140.85
ISO/TC 17/SC 10
ISO 9327-3:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties
90.93 77.140.30
77.140.85
ISO/TC 17/SC 10
ISO 9327-4:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength
90.93 77.140.30
77.140.85
ISO/TC 17/SC 10
ISO 9327-5:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels
90.93 77.140.30
77.140.85
ISO/TC 17/SC 10
ISO 9328-1:2011
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements
60.60 77.140.50
77.140.30
ISO/TC 17/SC 10
ISO 9328-2:2011
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties
60.60 77.140.50
77.140.30
ISO/TC 17/SC 10
ISO 9328-3:2011
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized
60.60 77.140.30
77.140.50
ISO/TC 17/SC 10
ISO 9328-4:2011
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties
60.60 77.140.30
77.140.50
ISO/TC 17/SC 10
ISO 9328-5:2011
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled
60.60 77.140.30
77.140.50
ISO/TC 17/SC 10
ISO 9328-6:2011
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered
60.60 77.140.30
77.140.50
ISO/TC 17/SC 10
ISO 9328-7:2011
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels
60.60 77.140.50
77.140.30
ISO/TC 17/SC 10
ISO 9329-1:1989
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9329-2:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9329-3:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9329-4:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9330-1:1990
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steel tubes with specified room temperature properties
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9330-2:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9330-3:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
90.93 77.140.75
23.040.10
ISO/TC 17/SC 19
ISO 9330-4:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9330-5:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9330-6:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes
90.93 23.040.10
77.140.75
ISO/TC 17/SC 19
ISO 9364:2011
Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities
60.60 77.140.50ISO/TC 17/SC 12
ISO 9441:1988
Steel -- Determination of niobium content -- PAR spectrophotometric method
90.93 77.080.20ISO/TC 17/SC 1
ISO 9442:1988
Steel -- Hot-rolled ribbed and grooved flats for spring leaves -- Tolerances and dimensions
90.20 77.140.25ISO/TC 17/SC 4
ISO 9443:1991
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions
90.93 77.140.10
77.140.60
77.140.20
ISO/TC 17/SC 4
ISO 9444-1:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths
90.93 77.140.20
77.140.50
ISO/TC 17/SC 4
ISO 9444-2:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate
90.93 77.140.20
77.140.50
ISO/TC 17/SC 4
ISO 9445-1:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths
90.93 77.140.50
77.140.20
ISO/TC 17/SC 4
ISO 9445-2:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and plate/sheet
90.93 77.140.50
77.140.20
ISO/TC 17/SC 4
ISO 9477:1992
High strength cast steels for general engineering and structural purposes
90.92 77.140.80ISO/TC 17/SC 11
ISO 9556:1989
Steel and iron -- Determination of total carbon content -- Infrared absorption method after combustion in an induction furnace
90.93 77.080.01ISO/TC 17/SC 1
ISO 9647:1989
Steel and iron -- Determination of vanadium content -- Flame atomic absorption spectrometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 9658:1990
Steel -- Determination of aluminium content -- Flame atomic absorption spectrometric method
90.93 77.080.20ISO/TC 17/SC 1
ISO/TR 9769:1991
Steel and iron -- Review of available methods of analysis
90.93 77.080.01ISO/TC 17/SC 1
ISO 10138:1991
Steel and iron -- Determination of chromium content -- Flame atomic absorption spectrometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 10144:1991
Certification scheme for steel bars and wires for the reinforcement of concrete structures
90.92 91.080.40
77.140.15
ISO/TC 17/SC 16
ISO 10153:1997
Steel -- Determination of boron content -- Curcumin spectrophotometric method
90.93 77.080.20ISO/TC 17/SC 1
ISO 10278:1995
Steel -- Determination of manganese content -- Inductively coupled plasma atomic emission spectrometric method
90.93 77.080.20ISO/TC 17/SC 1
ISO 10280:1991
Steel and iron -- Determination of titanium content -- Diantipyrylmethane spectrometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 10332:2010
Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10384:2012
Hot-rolled carbon steel sheet as defined by chemical composition
60.60 77.140.50ISO/TC 17/SC 12
ISO 10474:2013
Steel and steel products -- Inspection documents
60.60 77.140.01ISO/TC 17/SC 20
ISO 10544:1992
Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 10679:2010
Steel -- Cast tool steel
60.60 77.140.80ISO/TC 17/SC 11
ISO 10679:2010/Cor 1:2010
60.60 77.140.80ISO/TC 17/SC 11
ISO 10697-1:1992
Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 1: Determination of acid-soluble calcium content
90.93 77.080.20ISO/TC 17/SC 1
ISO 10697-2:1994
Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 2: Determination of total calcium content
90.93 77.080.20ISO/TC 17/SC 1
ISO 10698:1994
Steel -- Determination of antimony content -- Electrothermal atomic absorption spectrometric method
90.93 77.080.20ISO/TC 17/SC 1
ISO 10700:1994
Steel and iron -- Determination of manganese content -- Flame atomic absorption spectrometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 10701:1994
Steel and iron -- Determination of sulfur content -- Methylene blue spectrophotometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 10702:1993
Steel and iron -- Determination of nitrogen content -- Titrimetric method after distillation
90.93 77.080.01ISO/TC 17/SC 1
ISO 10714:1992
Steel and iron -- Determination of phosphorus content -- Phosphovanadomolybdate spectrophotometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 10720:1997
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas
90.93 77.080.01ISO/TC 17/SC 1
ISO 10893-1:2011
Non-destructive testing of steel tubes -- Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
60.60 23.040.10
77.140.75
77.040.20
ISO/TC 17/SC 19
ISO 10893-2:2011
Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10893-3:2011
Non-destructive testing of steel tubes -- Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10893-4:2011
Non-destructive testing of steel tubes -- Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10893-5:2011
Non-destructive testing of steel tubes -- Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10893-6:2011
Non-destructive testing of steel tubes -- Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
90.92 23.040.10
77.040.20
77.140.75
ISO/TC 17/SC 19
ISO 10893-7:2011
Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
90.92 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10893-8:2011
Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10893-9:2011
Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10893-10:2011
Non-destructive testing of steel tubes -- Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 10893-11:2011
Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
60.60 23.040.10
77.040.20
77.140.75
ISO/TC 17/SC 19
ISO 10893-12:2011
Non-destructive testing of steel tubes -- Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
60.60 77.140.75
77.040.20
23.040.10
ISO/TC 17/SC 19
ISO 11082:1992
Certification scheme for welded fabric for the reinforcement of concrete structures
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 11484:2009
Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel
90.92 03.100.30
77.040.20
ISO/TC 17/SC 19
ISO 11652:1997
Steel and iron -- Determination of cobalt content -- Flame atomic absorption spectrometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 11653:1997
Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange
90.93 77.080.20ISO/TC 17/SC 1
ISO 11692:1994
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
90.20 77.140.20
77.140.10
ISO/TC 17/SC 4
ISO 11949:1995
Cold-reduced electrolytic tinplate
90.92 77.140.50ISO/TC 17/SC 9
ISO 11950:1995
Cold-reduced electrolytic chromium/chromium oxide-coated steel
90.92 77.140.50ISO/TC 17/SC 9
ISO 11951:1995
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel
90.92 77.140.50ISO/TC 17/SC 9
ISO 11970:2001
Specification and approval of welding procedures for production welding of steel castings
90.92 25.160.10
77.140.80
ISO/TC 17/SC 11
ISO 11971:2008
Steel and iron castings -- Visual examination of surface quality
90.60 77.140.80
77.040.20
ISO/TC 17/SC 11
ISO 11972:1998
Corrosion-resistant cast steels for general applications
90.92 77.140.80
77.140.20
ISO/TC 17/SC 11
ISO 11973:1999
Heat-resistant cast steels and alloys for general applications
90.92 77.140.80
77.140.20
ISO/TC 17/SC 11
ISO 13270:2013
Steel fibres for concrete -- Definitions and specifications
60.60 91.080.40
77.140.15
ISO/TC 17/SC 17
ISO 13520:2002
Determination of ferrite content in austenitic stainless steel castings
90.92 77.140.80ISO/TC 17/SC 11
ISO 13521:1999
Austenitic manganese steel castings
90.92 77.140.80ISO/TC 17/SC 11
ISO 13583-1:2000
Centrifugally cast steel and alloy products -- Part 1: General testing and tolerances
90.92 77.140.80ISO/TC 17/SC 11
ISO 13583-2:2003
Centrifugally cast steel and alloy products -- Part 2: Heat resistant materials
90.92 77.140.80ISO/TC 17/SC 11
ISO 13887:2011
Cold-reduced steel sheet of higher yield strength with improved formability
60.60 77.140.50ISO/TC 17/SC 12
ISO 13898-1:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: General requirements and sample dissolution
90.93 77.080.01ISO/TC 17/SC 1
ISO 13898-2:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of nickel content
90.93 77.080.01ISO/TC 17/SC 1
ISO 13898-3:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of copper content
90.93 77.080.01ISO/TC 17/SC 1
ISO 13898-4:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 4: Determination of cobalt content
90.93 77.080.01ISO/TC 17/SC 1
ISO/TS 13899-1:2004
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: Determination of Mo content
90.93 77.080.20ISO/TC 17/SC 1
ISO 13899-2:2005
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of Nb content
90.93 77.080.20ISO/TC 17/SC 1
ISO/TS 13899-3:2005
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of W content
90.93 77.080.20ISO/TC 17/SC 1
ISO 13900:1997
Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation
90.93 77.080.20ISO/TC 17/SC 1
ISO 13902:1997
Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace
90.93 77.080.01ISO/TC 17/SC 1
ISO 13933:2014
Steel and iron -- Determination of calcium and magnesium -- Inductively coupled plasma atomic emission spectrometric method
60.60 77.080.01ISO/TC 17/SC 1
ISO 13976:2005
Hot-rolled steel sheet in coils of structural quality and heavy thickness
90.92 77.140.50ISO/TC 17/SC 12
ISO 14250:2000
Steel -- Metallographic characterization of duplex grain size and distributions
90.93 77.080.20ISO/TC 17/SC 7
ISO 14284:1996
Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
90.93 77.080.01ISO/TC 17/SC 1
ISO 14404-1:2013
Calculation method of carbon dioxide emission intensity from iron and steel production -- Part 1: Steel plant with blast furnace
60.60 77.080.01ISO/TC 17
ISO 14404-2:2013
Calculation method of carbon dioxide emission intensity from iron and steel production -- Part 2: Steel plant with electric arc furnace (EAF)
60.60 77.080.01ISO/TC 17
ISO 14590:2005
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
90.92 77.140.50ISO/TC 17/SC 12
ISO 14654:1999
Epoxy-coated steel for the reinforcement of concrete
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 14655:1999
Epoxy-coated strand for the prestressing of concrete
90.93 77.140.15
91.080.40
ISO/TC 17/SC 16
ISO 14656:1999
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
90.93 77.140.15
91.080.40
25.220.99
ISO/TC 17/SC 16
ISO 14657:2005
Zinc-coated steel for the reinforcement of concrete
90.93 91.080.40
77.140.99
ISO/TC 17/SC 16
ISO 14737:2003
Cast non-alloy and low alloy steels for general applications
90.92 77.140.80ISO/TC 17/SC 11
ISO 14788:2011
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
60.60 77.140.50ISO/TC 17/SC 12
ISO 15177:2012
Hot-rolled twin-roll cast carbon steel sheet of commercial quality
60.60 77.140.50ISO/TC 17/SC 12
ISO 15179:2012
Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
60.60 77.140.50ISO/TC 17/SC 12
ISO 15208:2012
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
60.60 77.140.50ISO/TC 17/SC 12
ISO 15211:2012
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
60.60 77.140.50ISO/TC 17/SC 12
ISO 15349-2:1999
Unalloyed steel -- Determination of low carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
90.93 77.080.20ISO/TC 17/SC 1
ISO 15350:2000
Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method)
90.93 77.080.01ISO/TC 17/SC 1
ISO 15351:1999
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method)
90.93 77.080.01ISO/TC 17/SC 1
ISO 15353:2001
Steel and iron -- Determination of tin content -- Flame atomic absorption spectrometric method (extraction as Sn-SCN)
90.93 77.080.01ISO/TC 17/SC 1
ISO 15355:1999
Steel and iron -- Determination of chromium content -- Indirect titration method
90.93 77.080.01ISO/TC 17/SC 1
ISO 15510:2014
Stainless steels -- Chemical composition
60.60 77.140.20ISO/TC 17/SC 4
ISO 15630-1:2010
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire
90.93 77.140.15ISO/TC 17/SC 16
ISO 15630-2:2010
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric
90.93 77.140.15ISO/TC 17/SC 16
ISO 15630-3:2010
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel
90.93 77.140.15ISO/TC 17/SC 16
ISO 15698-1:2012
Steel for the reinforcement of concrete -- Headed bars -- Part 1: Requirements
60.60 77.140.15ISO/TC 17/SC 16
ISO 15698-2:2012
Steel for the reinforcement of concrete -- Headed bars -- Part 2: Test methods
60.60 77.140.15ISO/TC 17/SC 16
ISO 15835-1:2009
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 1: Requirements
90.92 77.140.15ISO/TC 17/SC 16
ISO 15835-2:2009
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 2: Test methods
90.92 77.140.15ISO/TC 17/SC 16
ISO 16020:2005
Steel for the reinforcement and prestressing of concrete -- Vocabulary
90.93 77.140.15
01.040.77
ISO/TC 17/SC 16
ISO 16120-1:2011
Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements
90.92 77.140.60ISO/TC 17/SC 17
ISO 16120-2:2011
Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general-purpose wire rod
90.92 77.140.60ISO/TC 17/SC 17
ISO 16120-3:2011
Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
60.60 77.140.60ISO/TC 17/SC 17
ISO 16120-4:2011
Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications
90.92 77.140.60ISO/TC 17/SC 17
ISO 16124:2004
Steel wire rod -- Dimensions and tolerances
90.92 77.140.65ISO/TC 17/SC 17
ISO 16143-1:2014
Stainless steels for general purposes -- Part 1: Corrosion-resistant flat products
60.60 77.140.20ISO/TC 17/SC 4
ISO 16143-2:2014
Stainless steels for general purposes -- Part 2: Corrosion-resistant semi-finished products, bars, rods and sections
60.60 77.140.20ISO/TC 17/SC 4
ISO 16143-3:2014
Stainless steels for general purposes -- Part 3: Wire
60.60 77.140.65
77.140.20
ISO/TC 17/SC 4
ISO 16160:2012
Hot-rolled steel sheet products -- Dimensional and shape tolerances
60.60 77.140.50ISO/TC 17/SC 12
ISO 16162:2012
Cold-rolled steel sheet products -- Dimensional and shape tolerances
60.60 77.140.50ISO/TC 17/SC 12
ISO 16163:2012
Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances
60.60 77.140.50ISO/TC 17/SC 12
ISO 16172:2011
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
60.60 77.140.50ISO/TC 17/SC 12
ISO 16468:2005
Investment castings (steel, nickel alloys and cobalt alloys) -- General technical requirements
90.92 77.140.80ISO/TC 17/SC 11
ISO 16650:2004
Bead wire
90.93 77.140.65ISO/TC 17/SC 17
ISO 16918-1:2009
Steel and iron -- Determination of nine elements by the inductively coupled plasma mass spectrometric method -- Part 1: Determination of tin, antimony, cerium, lead and bismuth
90.93 77.080.01ISO/TC 17/SC 1
ISO 17053:2005
Steel and iron -- Determination of oxygen -- Infrared method after fusion under inert gas
90.93 77.080.01ISO/TC 17/SC 1
ISO 17054:2010
Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
60.60 77.080.20ISO/TC 17/SC 1
ISO/TR 17055:2002
Steel -- Determination of silicon content -- Inductively coupled plasma atomic emission spectrometric method
60.60 77.080.20ISO/TC 17/SC 1
ISO 17058:2004
Steel and iron -- Determination of arsenic content -- Spectrophotometric method
90.93 77.080.01ISO/TC 17/SC 1
ISO 17577:2006
Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
90.92 77.040.20
77.140.50
ISO/TC 17/SC 7
ISO 17832:2009
Non-parallel steel wire and cords for tyre reinforcement
90.60 77.140.65
83.160.01
ISO/TC 17/SC 17
ISO 17925:2004
Zinc and/or aluminium based coatings on steel -- Determination of coating mass per unit area and chemical composition -- Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
90.93 25.220.40
77.080.20
ISO/TC 17/SC 1
ISO 18286:2008
Hot-rolled stainless steel plates -- Tolerances on dimensions and shape
90.93 77.140.50ISO/TC 17/SC 4
ISO 18632:2010
Alloyed steel -- Determination of manganese -- Potentiometric and visual titration method
60.60 77.140.20ISO/TC 17/SC 1
ISO 19959:2005
Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys
90.93 77.140.80ISO/TC 17/SC 11
ISO 19960:2005
Cast steels and alloys with special physical properties
90.92 77.140.80ISO/TC 17/SC 11
ISO 20723:2004
Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements
90.93 77.140.60
77.140.70
ISO/TC 17/SC 3
ISO 20805:2011
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
60.60 77.140.50ISO/TC 17/SC 12
ISO 22034-1:2007
Steel wire and wire products -- Part 1: General test methods
90.93 77.140.65ISO/TC 17/SC 17
ISO 22034-2:2007
Steel wire and wire products -- Part 2: Tolerances on wire dimensions
90.92 77.140.65ISO/TC 17/SC 17
ISO 23717:2006
Steel wire and wire products -- Hose reinforcement wire
90.93 77.140.65ISO/TC 17/SC 17