Home

Standards catalogue

Subscribe to updates

ISO/TC 10  - Technical product documentation

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 10 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 128-1:2003
Technical drawings -- General principles of presentation -- Part 1: Introduction and index
90.60 01.100.01ISO/TC 10/SC 1
ISO 128-15:2013
Technical product documentation (TPD) -- General principles of presentation -- Part 15: Presentation of shipbuilding drawings
60.60 01.100.20ISO/TC 10/SC 6
ISO 128-20:1996
Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines
90.93 01.100.01ISO/TC 10/SC 1
ISO 128-21:1997
Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems
90.93 35.240.10
01.100.01
ISO/TC 10/SC 1
ISO 128-22:1999
Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines
90.93 01.100.01ISO/TC 10/SC 1
ISO 128-23:1999
Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings
90.93 01.100.30ISO/TC 10/SC 8
ISO 128-24:2014
Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering drawings
60.60 01.100.20ISO/TC 10/SC 6
ISO 128-25:1999
Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings
90.93 01.100.20
47.020.01
ISO/TC 10/SC 6
ISO 128-30:2001
Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views
90.93 01.100.01ISO/TC 10/SC 1
ISO 128-34:2001
Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings
90.93 01.100.20ISO/TC 10/SC 6
ISO 128-40:2001
Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections
90.93 01.100.01ISO/TC 10/SC 1
ISO 128-44:2001
Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings
90.93 01.100.20ISO/TC 10/SC 6
ISO 128-50:2001
Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections
90.93 01.100.01ISO/TC 10/SC 1
ISO/TS 128-71:2010
Technical product documentation (TPD) -- General principles of presentation -- Part 71: Simplified representation for mechanical engineering drawings
90.93 01.100.20ISO/TC 10/SC 6
ISO 129-1:2004
Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles
90.92 01.100.01ISO/TC 10/SC 1
ISO 129-4:2013
Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
60.60 01.100.01ISO/TC 10/SC 6
ISO 2162-1:1993
Technical product documentation -- Springs -- Part 1: Simplified representation
90.93 01.100.20
21.160
ISO/TC 10/SC 6
ISO 2203:1973
Technical drawings -- Conventional representation of gears
90.93 01.100.20
21.200
ISO/TC 10/SC 6
ISO 2594:1972
Building drawings -- Projection methods
90.92 01.100.30ISO/TC 10/SC 8
ISO 3098-0:1997
Technical product documentation -- Lettering -- Part 0: General requirements
90.92 01.100.01ISO/TC 10/SC 1
ISO 3098-2:2000
Technical product documentation -- Lettering -- Part 2: Latin alphabet, numerals and marks
90.93 01.100.01ISO/TC 10/SC 1
ISO 3098-3:2000
Technical product documentation -- Lettering -- Part 3: Greek alphabet
90.93 01.100.01ISO/TC 10/SC 1
ISO 3098-4:2000
Technical product documentation -- Lettering -- Part 4: Diacritical and particular marks for the Latin alphabet
90.93 01.100.01ISO/TC 10/SC 1
ISO 3098-5:1997
Technical product documentation -- Lettering -- Part 5: CAD lettering of the Latin alphabet, numerals and marks
90.93 35.240.10
01.100.01
ISO/TC 10/SC 1
ISO 3098-6:2000
Technical product documentation -- Lettering -- Part 6: Cyrillic alphabet
90.93 01.100.01ISO/TC 10/SC 1
ISO 3511-1:1977
Process measurement control functions and instrumentation -- Symbolic representation -- Part 1: Basic requirements
90.93 01.080.30
25.040.40
ISO/TC 10/SC 10
ISO 3511-2:1984
Process measurement control functions and instrumentation -- Symbolic representation -- Part 2: Extension of basic requirements
90.93 25.040.40
01.080.30
ISO/TC 10/SC 10
ISO 3511-3:1984
Process measurement control functions and instrumentation -- Symbolic representation -- Part 3: Detailed symbols for instrument interconnection diagrams
90.93 25.040.40
01.080.30
ISO/TC 10/SC 10
ISO 3511-4:1985
Industrial process measurement control functions and instrumentation -- Symbolic representation -- Part 4: Basic symbols for process computer, interface, and shared display/control functions
90.93 25.040.40
01.080.30
ISO/TC 10/SC 10
ISO 3766:2003
Construction drawings -- Simplified representation of concrete reinforcement
90.20 01.100.30ISO/TC 10/SC 8
ISO 3952-1:1981
Kinematic diagrams -- Graphical symbols
90.93 01.080.30
21.020
ISO/TC 10/SC 6
ISO 3952-1:1981/Amd 1:2002
60.60 01.080.30
21.020
ISO/TC 10/SC 6
ISO 3952-2:1981
Kinematic diagrams -- Graphical symbols
90.93 01.080.30
21.020
ISO/TC 10/SC 6
ISO 3952-3:1979
Kinematic diagrams -- Graphical symbols
90.93 01.080.30
21.020
ISO/TC 10/SC 6
ISO 3952-4:1984
Kinematic diagrams -- Graphical symbols
90.93 21.020
01.080.30
ISO/TC 10/SC 6
ISO 4067-2:1980
Building and civil engineering drawings -- Installations -- Part 2: Simplified representation of sanitary appliances
90.93 01.100.30
01.080.30
ISO/TC 10/SC 8
ISO 4157-1:1998
Construction drawings -- Designation systems -- Part 1: Buildings and parts of buildings
90.20 01.100.30ISO/TC 10/SC 8
ISO 4157-2:1998
Construction drawings -- Designation systems -- Part 2: Room names and numbers
90.20 01.100.30ISO/TC 10/SC 8
ISO 4157-3:1998
Construction drawings -- Designation systems -- Part 3: Room identifiers
90.20 01.100.30ISO/TC 10/SC 8
ISO 4172:1991
Technical drawings -- Construction drawings -- Drawings for the assembly of prefabricated structures
90.93 01.100.30ISO/TC 10/SC 8
ISO 5261:1995
Technical drawings -- Simplified representation of bars and profile sections
90.93 01.100.20ISO/TC 10/SC 1
ISO 5455:1979
Technical drawings -- Scales
90.93 01.100.01ISO/TC 10/SC 1
ISO 5456-1:1996
Technical drawings -- Projection methods -- Part 1: Synopsis
90.93 01.100.01ISO/TC 10/SC 1
ISO 5456-2:1996
Technical drawings -- Projection methods -- Part 2: Orthographic representations
90.93 01.100.01ISO/TC 10/SC 1
ISO 5456-3:1996
Technical drawings -- Projection methods -- Part 3: Axonometric representations
90.93 01.100.01ISO/TC 10/SC 1
ISO 5456-4:1996
Technical drawings -- Projection methods -- Part 4: Central projection
90.93 01.100.01ISO/TC 10/SC 1
ISO 5457:1999
Technical product documentation -- Sizes and layout of drawing sheets
90.93 01.100.01ISO/TC 10/SC 1
ISO 5457:1999/Amd 1:2010
60.60 01.100.01ISO/TC 10/SC 1
ISO 5845-1:1995
Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 1: General principles
90.20 01.100.20
21.060.01
ISO/TC 10/SC 6
ISO 5845-2:1995
Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 2: Rivets for aerospace equipment
90.20 49.030.60
01.100.20
ISO/TC 10/SC 6
ISO 6284:1996
Construction drawings -- Indication of limit deviations
90.93 01.100.30ISO/TC 10/SC 8
ISO 6410-1:1993
Technical drawings -- Screw threads and threaded parts -- Part 1: General conventions
90.93 01.100.20
21.040.01
ISO/TC 10/SC 6
ISO 6410-2:1993
Technical drawings -- Screw threads and threaded parts -- Part 2: Screw thread inserts
90.93 01.100.20
21.040.01
ISO/TC 10/SC 6
ISO 6410-3:1993
Technical drawings -- Screw threads and threaded parts -- Part 3: Simplified representation
90.93 01.100.20
21.040.01
ISO/TC 10/SC 6
ISO 6411:1982
Technical drawings -- Simplified representation of centre holes
90.93 01.100.20ISO/TC 10/SC 6
ISO 6412-1:1989
Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation
90.93 01.100.99
23.040.01
ISO/TC 10/SC 10
ISO 6412-2:1989
Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric projection
90.93 23.040.01
01.100.99
ISO/TC 10/SC 10
ISO 6412-3:1993
Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems
90.93 01.100.99
23.040.01
ISO/TC 10/SC 10
ISO 6413:1988
Technical drawings -- Representation of splines and serrations
90.93 21.120.30
01.100.20
ISO/TC 10/SC 6
ISO 6414:1982
Technical drawings for glassware
90.93 01.100.99ISO/TC 10/SC 6
ISO 6428:1982
Technical drawings -- Requirements for microcopying
90.93 01.100.01
37.080
ISO/TC 10/SC 1
ISO 6433:2012
Technical product documentation -- Part references
60.60 01.110ISO/TC 10/SC 1
ISO 7083:1983
Technical drawings -- Symbols for geometrical tolerancing -- Proportions and dimensions
90.93 01.100.20ISO/TC 10/SC 1
ISO 7200:2004
Technical product documentation -- Data fields in title blocks and document headers
90.93 01.110ISO/TC 10/SC 1
ISO 7437:1990
Technical drawings -- Construction drawings -- General rules for execution of production drawings for prefabricated structural components
90.93 01.100.30ISO/TC 10/SC 8
ISO 7518:1983
Technical drawings -- Construction drawings -- Simplified representation of demolition and rebuilding
90.20 01.100.30ISO/TC 10/SC 8
ISO 7519:1991
Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings
90.93 01.100.30ISO/TC 10/SC 8
ISO 7573:2008
Technical product documentation -- Parts lists
90.93 01.110ISO/TC 10/SC 1
ISO 8048:1984
Technical drawings -- Construction drawings -- Representation of views, sections and cuts
90.92 01.100.30ISO/TC 10/SC 8
ISO 8560:1986
Technical drawings -- Construction drawings -- Representation of modular sizes, lines and grids
90.93 01.100.30ISO/TC 10/SC 8
ISO 8826-1:1989
Technical drawings -- Rolling bearings -- Part 1: General simplified representation
90.93 21.100.20
01.100.20
ISO/TC 10/SC 6
ISO 8826-2:1994
Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation
90.93 01.100.20
21.100.20
ISO/TC 10/SC 6
ISO 9175-1:1988
Tubular tips for hand-held technical pens using India ink on tracing paper -- Part 1: Definitions, dimensions, designation and marking
90.93 01.100.40ISO/TC 10
ISO 9177-1:2011
Mechanical pencils -- Part 1: Classification, dimensions, performance requirements and testing
60.60 97.180
01.100.40
ISO/TC 10
ISO 9177-2:1989
Mechanical pencils -- Part 2: Black leads -- Classification and dimensions
90.93 01.100.40
97.180
ISO/TC 10
ISO 9177-3:1994
Mechanical pencils -- Part 3: Black leads -- Bending strengths of HB leads
90.93 01.100.40
97.180
ISO/TC 10
ISO 9180:1988
Black leads for wood-cased pencils -- Classification and diameters
90.93 01.100.40ISO/TC 10
ISO 9222-1:1989
Technical drawings -- Seals for dynamic application -- Part 1: General simplified representation
90.93 21.140
01.100.20
ISO/TC 10/SC 6
ISO 9222-2:1989
Technical drawings -- Seals for dynamic application -- Part 2: Detailed simplified representation
90.93 21.140
01.100.20
ISO/TC 10/SC 6
ISO 9431:1990
Construction drawings -- Spaces for drawing and for text, and title blocks on drawing sheets
90.93 01.100.30ISO/TC 10/SC 8
ISO 9957-1:1992
Fluid draughting media -- Part 1: Water-based India ink -- Requirements and test conditions
90.60 01.100.40ISO/TC 10
ISO 9957-2:1995
Fluid draughting media -- Part 2: Water-based non-India ink -- Requirements and test conditions
90.93 01.100.40ISO/TC 10
ISO 9957-3:1997
Fluid draughting media -- Part 3: Water-based coloured draughting inks -- Requirements and test conditions
90.60 01.100.40ISO/TC 10
ISO 9958-1:1992
Draughting media for technical drawings -- Draughting film with polyester base -- Part 1: Requirements and marking
90.60 01.100.40ISO/TC 10
ISO 9958-2:1992
Draughting media for technical drawings -- Draughting film with polyester base -- Part 2: Determination of properties
90.60 01.100.40ISO/TC 10
ISO 9959-1:1992
Numerically controlled draughting machines -- Drawing test for the evaluation of performance -- Part 1: Vector plotters
90.60 01.100.40ISO/TC 10
ISO 9960-1:1992
Draughting instruments with or without graduation -- Part 1: Draughting scale rules
90.60 01.100.40ISO/TC 10
ISO 9961:1992
Draughting media for technical drawings -- Natural tracing paper
90.60 01.100.40ISO/TC 10
ISO 9962-1:1992
Manually operated draughting machines -- Part 1: Definitions, classification and designation
90.60 01.100.40ISO/TC 10
ISO 9962-2:1992
Manually operated draughting machines -- Part 2: Characteristics, performance, inspection and marking
90.60 01.100.40ISO/TC 10
ISO 10209:2012
Technical product documentation -- Vocabulary -- Terms relating to technical drawings, product definition and related documentation
60.60 01.110
01.040.01
ISO/TC 10
ISO 10628-1:2014
Diagrams for the chemical and petrochemical industry -- Part 1: Specification of diagrams
60.60 75.020
71.020
01.110
ISO/TC 10/SC 10
ISO 10628-2:2012
Diagrams for the chemical and petrochemical industry -- Part 2: Graphical symbols
60.60 75.020
71.020
01.080.30
ISO/TC 10/SC 10
ISO 11005:2010
Technical product documentation -- Use of main documents
60.60 01.110ISO/TC 10/SC 1
ISO 11091:1994
Construction drawings -- Landscape drawing practice
90.93 01.100.30ISO/TC 10/SC 8
ISO 11442:2006
Technical product documentation -- Document management
90.93 01.110
35.240.10
ISO/TC 10/SC 1
ISO 11540:2014
Writing and marking instruments -- Specification for caps to reduce the risk of asphyxiation
60.60 97.180
97.190
ISO/TC 10
ISO 12756:1998
Drawing and writing instruments -- Ball point pens and roller ball pens -- Vocabulary
90.60 01.100.40
01.040.01
01.040.97
97.180
ISO/TC 10
ISO 12756:1998/Amd 1:2011
Viscosity of the writing fluid
60.60 01.040.01
01.100.40
01.040.97
97.180
ISO/TC 10
ISO 12757-1:1998
Ball point pens and refills -- Part 1: General use
90.60 97.180ISO/TC 10
ISO 12757-2:1998
Ball point pens and refills -- Part 2: Documentary use (DOC)
90.60 01.100.40ISO/TC 10
ISO 13444:2012
Technical product documentation (TPD) -- Dimensioning and indication of knurling
60.60 01.100.20ISO/TC 10/SC 6
ISO 13567-1:1998
Technical product documentation -- Organization and naming of layers for CAD -- Part 1: Overview and principles
90.20 35.240.10
01.110
ISO/TC 10/SC 8
ISO 13567-2:1998
Technical product documentation -- Organization and naming of layers for CAD -- Part 2: Concepts, format and codes used in construction documentation
90.20 01.110
35.240.10
ISO/TC 10/SC 8
ISO/TR 13567-3:1999
Technical product documentation -- Organization and naming of layers for CAD -- Part 3: Application of ISO 13567-1 and ISO 13567-2
90.93 01.110
35.240.10
ISO/TC 10/SC 8
ISO 13715:2000
Technical drawings -- Edges of undefined shape -- Vocabulary and indications
90.92 01.100.20
01.040.01
ISO/TC 10/SC 6
ISO 14145-1:1998
Roller ball pens and refills -- Part 1: General use
90.60 97.180ISO/TC 10
ISO 14145-1:1998/Amd 1:2011
Ball diameter for tip classification
60.60 97.180ISO/TC 10
ISO 14145-2:1998
Roller ball pens and refills -- Part 2: Documentary use (DOC)
90.60 01.100.40ISO/TC 10
ISO 14617-1:2005
Graphical symbols for diagrams -- Part 1: General information and indexes
90.92 01.080.30ISO/TC 10/SC 10
ISO 14617-2:2002
Graphical symbols for diagrams -- Part 2: Symbols having general application
90.92 01.080.30ISO/TC 10/SC 10
ISO 14617-3:2002
Graphical symbols for diagrams -- Part 3: Connections and related devices
90.92 01.080.30
23.040.01
ISO/TC 10/SC 10
ISO 14617-4:2002
Graphical symbols for diagrams -- Part 4: Actuators and related devices
90.92 01.080.30ISO/TC 10/SC 10
ISO 14617-5:2002
Graphical symbols for diagrams -- Part 5: Measurement and control devices
90.92 01.080.30ISO/TC 10/SC 10
ISO 14617-6:2002
Graphical symbols for diagrams -- Part 6: Measurement and control functions
90.92 01.080.30ISO/TC 10/SC 10
ISO 14617-7:2002
Graphical symbols for diagrams -- Part 7: Basic mechanical components
90.92 01.080.30ISO/TC 10/SC 10
ISO 14617-8:2002
Graphical symbols for diagrams -- Part 8: Valves and dampers
90.92 01.080.30
23.060.01
ISO/TC 10/SC 10
ISO 14617-9:2002
Graphical symbols for diagrams -- Part 9: Pumps, compressors and fans
90.92 01.080.30
23.080
23.140
23.120
ISO/TC 10/SC 10
ISO 14617-10:2002
Graphical symbols for diagrams -- Part 10: Fluid power converters
90.92 01.080.30
23.100.01
ISO/TC 10/SC 10
ISO 14617-11:2002
Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat engines
90.92 01.080.30
27.010
ISO/TC 10/SC 10
ISO 14617-12:2002
Graphical symbols for diagrams -- Part 12: Devices for separating, purification and mixing
90.92 01.080.30ISO/TC 10/SC 10
ISO 14617-13:2004
Graphical symbols for diagrams -- Part 13: Devices for material processing
90.92 01.080.30ISO/TC 10/SC 10
ISO 14617-14:2004
Graphical symbols for diagrams -- Part 14: Devices for transport and handling of material
90.92 53.040.01
01.080.30
ISO/TC 10/SC 10
ISO 14617-15:2002
Graphical symbols for diagrams -- Part 15: Installation diagrams and network maps
90.92 01.080.30
91.140.01
ISO/TC 10/SC 10
ISO 15226:1999
Technical product documentation -- Life cycle model and allocation of documents
90.93 01.110ISO/TC 10/SC 1
ISO 15519-1:2010
Specification for diagrams for process industry -- Part 1: General rules
60.60 01.110
01.080.30
ISO/TC 10/SC 10
ISO 15785:2002
Technical drawings -- Symbolic presentation and indication of adhesive, fold and pressed joints
90.93 01.100.20ISO/TC 10/SC 6
ISO 15786:2008
Technical drawings -- Simplified representation and dimensioning of holes
90.93 01.100.20ISO/TC 10/SC 6
ISO 15787:2001
Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications
90.92 25.200
01.100.20
ISO/TC 10/SC 6
ISO 16016:2000
Technical product documentation -- Protection notices for restricting the use of documents and products
90.92 01.110ISO/TC 10/SC 1
ISO 16792:2006
Technical product documentation -- Digital product definition data practices
90.92 35.240.10
01.110
ISO/TC 10
ISO/TS 16952-10:2008
Technical product documentation -- Reference designation system -- Part 10: Power plants
90.92 01.110ISO/TC 10/SC 10
ISO/TR 19033:2000
Technical product documentation -- Metadata for construction documentation
90.93 01.110ISO/TC 10/SC 8
ISO 27668-1:2009
Gel ink ball pens and refills -- Part 1: General use
90.60 97.180ISO/TC 10
ISO 27668-2:2009
Gel ink ball pens and refills -- Part 2: Documentary use (DOC)
90.60 01.100.40ISO/TC 10
ISO 29845:2011
Technical product documentation -- Document types
60.60 01.110ISO/TC 10/SC 1
IEC 81346-1:2009
Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 1: Basic rules
60.60 25.040.01ISO/TC 10
IEC 81346-2:2009
Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 2: Classification of objects and codes for classes
60.60 25.040.01ISO/TC 10
ISO/TS 81346-3:2012
Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 3: Application rules for a reference designation system
60.60 01.110ISO/TC 10/SC 10
ISO 81714-1:2010
Design of graphical symbols for use in the technical documentation of products -- Part 1: Basic rules
60.60 01.110
01.080.01
ISO/TC 10/SC 10
IEC 81714-2:2006
Design of graphical symbols for use in the technical documentation of products -- Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
60.60 01.080.01
01.110
ISO/TC 10/SC 10
IEC 81714-3:2004
Design of graphical symbols for use in the technical documentation of products -- Part 3: Classification of connect nodes, networks and their encoding
90.20 01.110
01.080.01
ISO/TC 10/SC 10
IEC 82045-1:2001
Document management -- Part 1: Principles and methods
90.93 01.110ISO/TC 10
IEC 82045-2:2004
Document management -- Part 2: Metadata elements and information reference model
60.60 01.110ISO/TC 10
ISO 82045-5:2005
Document management -- Part 5: Application of metadata for the construction and facility management sector
90.20 01.110ISO/TC 10/SC 8
IEC 82079-1:2012
Preparation of instructions for use -- Structuring, content and presentation -- Part 1: General principles and detailed requirements
60.60 01.110ISO/TC 10